- Chimera-users - RBVI Mailing Lists

Re: [Chimera-users] difference electron density maps
by Elaine Meng 17 Jul '20

17 Jul '20

Hi Agata, Yes, I was describing using Ctrl-click to add a contour level at a negative level, using the Volume Viewer GUI, in addition to the one at the positive level that was already shown. You can have multiple contours at different levels at the same time, as shown by multiple vertical bars on the histogram. You can also do it in a single command, e.g. volume #1 sdlevel 3.5 sdlevel -3.5 Or via alias alias ^map_sig volume $1 sdlevel $2 sdlevel -$2 map_sig #1 3.5 I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Jul 17, 2020, at 9:13 AM, Butryn, Agata (DLSLtd,RAL,LSCI) <agata.butryn(a)diamond.ac.uk> wrote: > > Hello Elaine, > > Thanks a lot for your advice, it is not quite obvious when the map is displayed in a surface mode.. I wanted to display both positive and negative peaks at a certain level simultaneously (like in Coot). If you type > > alias ^map_sig volume $1 sdlevel $2 > map_sig #1 3.5 > > only positive values at 3.5 sigma are displayed. By adding > > map_sig #1 -3.5 > > and unclicking 'cap high values at box faces' everything works perfectly. Many thanks again! > > Best wishes, > Agata > > > On 17/07/2020, 16:23, "Elaine Meng" <meng(a)cgl.ucsf.edu> wrote: > > Hi Agata, > I guess you mean that the map has both positive and negative values, but when it first displays there is only one isosurface at a positive value. > > In the Volume Viewer dialog there is a histogram of the map values with a vertical bar marking the isosurface level. You just Ctrl-click on the histogram to add another one. You can drag the vertical bars (thresholds) horizontally on the histogram to whatever contour levels you want, positive and/or negative, change their colors, etc. > > This is explained in the section about surface display with Volume Viewer: > <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/volumeviewer/fram…> > <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/volumeviewer/volu…> > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > >> On Jul 17, 2020, at 3:13 AM, Butryn, Agata (DLSLtd,RAL,LSCI) <agata.butryn(a)diamond.ac.uk> wrote: >> >> Hello, >> I have been trying to display a difference electron density map in Chimera. The map was exported from Coot in a ccp4 format and contains both positive and negative peaks. When I load the map in Chimera only the positive peaks are displayed. Is there a way to display the negative peaks? >> Many thanks and best wishes, >> Agata >> >

2 1

difference electron density maps
by Butryn, Agata (DLSLtd,RAL,LSCI) 17 Jul '20

17 Jul '20

Hello, I have been trying to display a difference electron density map in Chimera. The map was exported from Coot in a ccp4 format and contains both positive and negative peaks. When I load the map in Chimera only the positive peaks are displayed. Is there a way to display the negative peaks? Many thanks and best wishes, Agata ~~~ Agata Butryn Postdoctoral Research Associate, XFEL Hub Diamond Light Source Ltd. Harwell Science & Innovation Campus Didcot, Oxfordshire, OX11 0DE United Kingdom +44 (0) 1235 778 788 agata.butryn(a)diamond.ac.uk<mailto:agata.butryn@diamond.ac.uk> -- This e-mail and any attachments may contain confidential, copyright and or privileged material, and are for the use of the intended addressee only. If you are not the intended addressee or an authorised recipient of the addressee please notify us of receipt by returning the e-mail and do not use, copy, retain, distribute or disclose the information in or attached to the e-mail. Any opinions expressed within this e-mail are those of the individual and not necessarily of Diamond Light Source Ltd. Diamond Light Source Ltd. cannot guarantee that this e-mail or any attachments are free from viruses and we cannot accept liability for any damage which you may sustain as a result of software viruses which may be transmitted in or with the message. Diamond Light Source Limited (company no. 4375679). Registered in England and Wales with its registered office at Diamond House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE, United Kingdom

2 1

Rama Plot generation for PDB with multiple Models
by Samuel Himes 16 Jul '20

16 Jul '20

Hello! I am working with PDBs with up to 100 models I want to generate one Rama Plot for the entire PDB. However, when I use the “Ramachandran Plot” in the model panel it creates a single plot for each model. Meaning 100 separate windows open. Is there a good way generate one Rama Plot for multiple models? Thanks -Sam Himes

2 1

H-Bond Parameters
by Luke Kurfman-Student 16 Jul '20

16 Jul '20

Hello Sr./Ms., I'm using UCSF Chimera to analyze the hydrogen bonding of some structures of mine, in this case a system of three sulfuric acids. When I attempt to analyze this structure by changing the "Relax constraints by:" :[cid:d0a4e474-33c9-4d74-84c4-5b6b7101e390] The bond on the left gets eliminated before the bond on the right, even though by calculating the angle with the Angles/Torsion tool, between the O--H-------O of each hydrogen bond, I get an angle of 146.337 for the bond on the left, whereas for the angle on the right I get an angle of 144.189. It should not logically cut off the hydrogen bond on the left before the one on the right since the left hydrogen bond is shorter and straighter. Thus, I'm wondering why is chimera cutting the left angle off, and also is there a way for it to automatically display what chimera finds is the bond angle without using the angle/torsion tool? I've also tried different combinations of 3-4 atoms to get different bond angles, but no success in determining this difference. By adjusting the H-bond constraints by trial and error, the bond angle difference appears to be about 1.603 degrees according to what chimera automatically finds: [cid:d86dc3ee-58f1-4911-8cc2-a92268240a94] Any help is appreciated, Luke

2 1

how can i cluster the result in .dcd file using chimera on a superomputer?
by Ibrahim Mohamed 16 Jul '20

16 Jul '20

Greeting sir, i want to use chimera (V 1.14) on a super computer to cluster the results from NAMD .dcd file but i found that it can be used only through the GUI. Is there a way to cluster the results from .dcd file using a script? if it is possible please send me the script thanks

2 3

crop map command
by Hernando J Sosa 15 Jul '20

15 Jul '20

Dear Chimera, I there a chimera command equivalent to Features -> subregion selection -> crop in the Volume viewer menu? Thanks Hernando

3 6

X-Ray Images
by Gary Korkala 15 Jul '20

15 Jul '20

Dear Sir/Madam, Has this software ever been utilized on digital microfocus x-ray images? Thanks and best regards, Gary Korkala Kodex, Inc. 160 Park Avenue Nutley, NJ 07110 USA Tel. 973-235-0606 Fax. 973-235-0132 Email: <mailto:kodex@kodexray.com> kodex(a)kodexray.com

2 1

Solvent Exposure of Amino Acids HELP
by Narine Vapuryan 15 Jul '20

15 Jul '20

Hi! I hope this email finds you well and healthy. I have a question regarding relative solvent excluded surface area (relSESA) calculations using Chimera. I am able to calculate the relative solvent excluded surface areas of residues using the following Chimera guide: https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/surfnorm.html. Although I am able to perform the calculations and get an output, I am having trouble understanding those values. I would have expected lower relSESA values to mean more residue exposure to solvent (surface residues), and high relSESA to mean less residue exposure to solvent (buried residues). Is my interpretation incorrect? Are lower relSESA values are to be interpreted as lower exposure to solvent (buried residues) and higher relSESA values as more exposed to the solvent (surface residues)? I would really appreciate any help or insight on this matter considering that I have been trying to figure this out for the past week. Please feel free to reach out to me if you need clarification on my question. Best, Narine

2 2

Creating a Volume Viewer Preset
by MICHAEL M ARISTOV 15 Jul '20

15 Jul '20

Hello All, I'm hoping to get some inset in setting up a preset for New Surface. Ideally, I'd Like it to do the following: Firstly, I'd like to open the surface with a predefined Level -0.05 -> 0.05 (regardless of range) (The value set in volume viewer) Secondly, I'd like to set the color of the surface to Red for Negative and Blue for Positive Lastly, I'd like any additional surfaces opened in the same session to have the above parameters as well. If anyone could provide me some tips to make the above settings default, I would greatly appreciate it! Thank you for your time and insight. -Mike Aristov

2 1

Re: [Chimera-users] [chimerax-users] re-assignment of mousemode
by piskacek＠post.cz 14 Jul '20

14 Jul '20

Dear Elaine, thank you very much for your assistance, but I do everything correctly, but it just did not work = see figure I would like to rotate tryptofan in my figure, so as first I need to set pivot on the C-atom (designated here as CB) and than rotate with right mouse the tryptofan -- Martin Piskacek Laboratory of Cancer Biology and Genetics www.piskacek.org Department of Pathological Physiology Faculty of Medicine Masaryk University Brno Kamenice 5 625 00 Brno Czech Republic ---------- Původní e-mail ---------- Od: Elaine Meng <meng(a)cgl.ucsf.edu> Komu: <piskacek(a)post.cz> <piskacek(a)post.cz> Datum: 14. 7. 2020 0:29:28 Předmět: Re: [chimerax-users] re-assignment of mousemode "You have to display the atoms (e.g. command "show") and click on an atom. You said "on amino acid" which makes me think you are clicking on the ribbon instead, which is not the same as clicking on an atom and will not set the pivot. If you are displaying atoms and after clicking the Right Mouse "set pivot" icon, clicking the atom with the right mouse button doesn't make that atom the center of rotation, then you can use menu: Help... Report a Bug to submit a bug report that includes more information about your specific type of computer. If you don't want to show atoms, you can select ribbon of the amino acid with Ctrl-click (which will draw a green outline for that residue) and then use the Actions menu method described in my second message to set the pivot to the whole selected residue instead of to a single atom. Elaine > On Jul 13, 2020, at 2:48 PM, <piskacek(a)post.cz> <piskacek(a)post.cz> wrote: > > exactly all as you described all this is not working > > I assigned what my wright mouse should execute, > but if I try to apply this function on amino acid from my protein it is not working > > Should I need to activate my mousemode somehow? > > I suppose, that ChimeraX is not working properly on windows in my case > I need some correction of some script to solve some hidden conflict in windows > > thank you very much for you help > -- > Martin Piskacek > Laboratory of Cancer Biology and Genetics > www.piskacek.org > Department of Pathological Physiology > Faculty of Medicine > Masaryk University Brno > Kamenice 5 > 625 00 Brno > Czech Republic > > > ---------- Původní e-mail ---------- > Od: Elaine Meng <meng(a)cgl.ucsf.edu> > Komu: <piskacek(a)post.cz> <piskacek(a)post.cz> > Datum: 13. 7. 2020 22:45:47 > Předmět: Re: [chimerax-users] re-assignment of mousemode > > Another way to set pivot (without changing mouse-button functions) is by: > > (1) selecting an atom (Ctrl-click on the atom in the graphics window) that you want as the center of rotation > (2) using menu: Actions... Set Pivot > > Elaine > > > On Jul 13, 2020, at 1:00 PM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > > > Hi Martin, > > It is not clear what you mean by "no response." Do you have a mouse with a right button, or can you use trackpad + Alt as the right button? If you click any other icons in the Right Mouse tab of the Toolbar, can you successfully assign any of those other functions to the right mouse button? > > > > Maybe it is a misunderstanding of how the icons work: > > If it is working correctly, nothing will happen when you click a RIght Mouse icon, except that there will be a light green box around that icon. Clicking the icon only reassigns the function of the right mouse button, but does not perform any action at that time. However, if you reassign to pivot by clicking the Right Mouse pivot icon, for example, then later clicking with the right mouse button (if you have one) on an atom will make that atom the pivot point. > > > > <http://rbvi.ucsf.edu/chimerax/docs/user/tools/mousemodes.html> > > > > If you do not have a right mouse button, you can use the "mousemode" command (instead of icons) to assign the function to a different mouse button. > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/ui.html#mousemode> > > > > I hope this helps, > > Elaine > > ----- > > Elaine C. Meng, Ph.D. > > UCSF Chimera(X) team > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > > >> On Jul 13, 2020, at 9:02 AM, <piskacek(a)post.cz> <piskacek(a)post.cz> wrote: > >> > >> Dear Authors of ChimeraX, > >> > >> I load and start to use your very useful program ChimeraX on Windows 10 > >> (Alienware 17 x64, I7-4900MQ 2.8GHz, RAM 32GB, GeForce GTX 780M), > >> > >> I could do the same and more as in PyMol, but > >> I have trouble with re-assignment of mousemode in window "Right Mouse" > >> as result is no response for re-assignment into Pivot or Rotate model > >> > >> I tried ChimeraX versions 0,93, 1.0 and 1.1 (daily version) w/o improvement > >> > >> Please, could you help me > >> Thank you very much for support > >> "

2 2