- Chimera-users - RBVI Mailing Lists

Definition of residues involved in binding ligand
by Maarten Schledorn 26 Oct '16

26 Oct '16

Dear reader, I have a pdb file of a protein with bound ADP and the file contains nothing but atomic coordinates and a few CONECT lines. If I open the file, the residues involved in binding ADP are shown, but I would like to know how Chimera knows this. I assume it is some VdW vicinity/overlap perhaps, or all residues within a certain distance from the ADP molecule, but I would like to know exactly how it is defined. I have tried to look for it in the documentation but haven't been successful so far. Does someone know the answer or a link to where it has been discussed previously? Many thanks in advance! Maarten

2 1

pythonic version of fitmap tool
by Michał Kadlof 25 Oct '16

25 Oct '16

Is there any pythonic way of running fitmap tool? I would like to use it as a function that return parameters that I can assign to variable without parsing the output. I didn't find anything similar in Midas module. -- best wishes, Michał Kadlof <m.kadlof(a)cent.uw.edu.pl>

2 1

Re: [Chimera-users] chimera minimization querry
by Elaine Meng 21 Oct '16

21 Oct '16

On Oct 21, 2016, at 2:42 AM, Shumaila Khan <shumailakhan432(a)yahoo.com> wrote: > > Hello, > I am shumaila khan , M.phil student at Quaid-i-Azam University Islamabad, Pakistan. Attached File is my structure and I want to minimize it. But there occurs an error that "Residue #0.1:165.A (ALA/ alanine) should have either atom HN or H, but not both. Kindly please reply me asap and help me out. > Thanks Dear Shumaila, For future reference, you should use the chimera-users(a)cgl.ucsf.edu email address for questions. For the minimization error, it is probably what the message says! I can only repeat the message: the residue should not have both of those atoms that it mentions, so you would need to delete one of them. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Chimera crashes on Mac OS Sierra (10.12)
by Tom Goddard 20 Oct '16

20 Oct '16

The Chimera developers have received 8 Chimera crash reports on the new Mac OS Sierra (10.12) somehow related to scrollbars. You may want to hold off updating to Sierra if you make heavy use of Chimera. We have not yet been able to reproduce the crash. It is very likely a bug in the Mac Tk window toolkit that Chimera uses, so even when we figure out how to reproduce it it may take time to figure out a fix since the problem is not in our code. Tom

1 1

creating O2 molecule in Chimera
by Elaine Meng 20 Oct '16

20 Oct '16

> Subject: Query about chimera > Date: Thu, 20 Oct 2016 06:47:23 +0000 (UTC) > From: Shumaila Khan <shumailakhan432(a)yahoo.com> > > Hello, > I m student from Quaid-i-Azam University, Pakistan, doing my MS research project and I have some problems while working on chimera. I want some help regarding Attachment of oxygen atom to plant hemoglobin.Kindly please help me out how will I do that. kindly tell me how to draw oxygen molecule on chimera? While drawing Oxygen molecule it has only only Oxygen atom and two hydrogen atoms attached. Kindly help me out. Waiting for your kind response. Hi Shumalia, Your question was forwarded to me — Chimera questions should be sent to this address, chimera-users(a)cgl.ucsf.edu There are several different approaches you could use. One way is to use command: open smiles:oo If you hold the mouse over it you can see a balloon that says the bond length is 1.004. You could change the bond length to a better value by (1) selecting the bond (Ctrl-click on the bond so it has a green outline) (2) using Build Structure to change the length of the bond. Menu: Tools… Structure Editing… Build Structure, and in that dialog change from the “Start Structure” section to the “Adjust Bonds” section. Now you can use the slider or type in a value to change the length to what you want. <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/editing/editing.h…> That would make the oxygen molecule a separate model from your hemoglobin. You would probably want to first move the oxygen molecule by hand to the right position, and then (optionally) combine it together with the hemoglobin to make a single model depending on what you are planning to do. If you don’t need them in the same model, there is no need to combine. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/mouse.html#activedef> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/mouse.html> <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/combine.html> Or, another totally different approach is to find some other hemoglobin structure that already has an oxygen molecule and superimpose the two structures to get the oxygen in the right place, and then delete all the other atoms of the other structure except for the oxygen molecule. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/superposition.html> I hope this helps, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

chimera 1.11.2rc crashes
by Yanni Goudeuk 18 Oct '16

18 Oct '16

Hello Chimera developers I've got the latest chimera (1.11.2rc), installed on windows 7 (64bit). My card is Nvidia Quadro K2000 and is using the latest drivers: 369.49 - *3D OpenGL stereo* is *enabled* under "*manage 3D settings"* in *nvidia Control Panel* My problem is that chimera crashes a few minutes after I open a .pyc file. Sometimes it will crash when I add a map in "*model panel*", sometimes when I rotate the structure, sometimes when I go though the tabs under " *Favourites*" --> "*Side view*". This is happening with other .pyc files too. I can also confirm that this is happening with older versions of chimera. Please have a look at the Application error log from event viewer: The program pythonw.exe version 0.0.0.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel. Process ID: ab0 Start Time: 01d2246bcf21dbd4 Termination Time: 46 Application Path: C:\Program Files\Chimera 1.11.2rc\bin\pythonw.exe Report Id: 3c965b43-905f-11e6-bd99-b8ca3a8bb0d4 If you have any suggestions please let me know. Many thanks

3 7

Guidance in finding Interactive Aminoacids with a ligand
by Shreyas Iyer 17 Oct '16

17 Oct '16

Respected Sir, I am unable to find the interactive aminoacids with the ligand present in a protein. Please guide me how to determine interatcive aminoacids. Awaiting a positive reply Yours Sincerely, Shreyas M Iyer

2 1

MatchMaker algorithm
by 陈柳青 15 Oct '16

15 Oct '16

Respected Sir/Madam The ucsf matchmaker algorithm is "Needleman-Wunsch" and "Smith-Waterman", but other program use SSM algorithm, such as ccp4mg, cuemol et al., can chimera add SSM algorithm? and whether these algorithm will affect results differently? sincerely Liuqing chen -- Liuqing Chen School of Life Science & Biotechnology Minhang Campus Shanghai Jiao Tong University No. 800 Dongchuan Road Shanghai 200240 P.R. China Tel: +86 21 34207247

2 1

MD trajectory analysis
by George Tzotzos 13 Oct '16

13 Oct '16

My task is to identify ligand interactions with protein residues throughout an MD trajectory. I thought of something along the lines sel ligand z<3.5 #for vdW interactions, etc. I don’t think this can be done using the MD movie interface but I may be wrong. I then tried the following: 1. sel protein/hold selection steady 2. sel ligand 3. calculate occupancy (MD Movie/Analysis) 4. Chimera/select/clear selection 5. turned the Volume Viewer to mesh/level2. What I obtained is a mesh grid enclosing solid surfaces (see attached snapshot). I’m not able to get rid of these surfaces? I think that the problem ma be in step 2 above (sel :ligand). My ligand is N,N-Diethyl-meta-toluamide. Should I select the aromatic ring part separately of the amide part, run the above process and then repeat selecting the amide part? I also tried MD movie/Analysis/Residue interaction network, first selecting the ligand. The results I obtained are not satisfactory. Is there a better way of dealing with my problem? Thanks in advance for your kind help George

2 5

Re: [Chimera-users] question
by Jaynes, Jesse 12 Oct '16

12 Oct '16

Hi Folks: I am having difficulty in converting C-terminal carboxyl to C-terminal amide on a beta sheet of 16 amino acids in length. When I try to get the complete amino acids displayed, it doesn't work. It just displays the main peptide cylinder. Thanks for your help. Jesse Jaynes On Thu, Oct 6, 2016 at 6:11 PM, Jaynes, Jesse <jjaynes(a)mytu.tuskegee.edu> wrote: > Hi Folks: > > I am interested in generating a 23 amino acid peptide with several > ornithines present. Is it possible? If not can I construct it with > glutamine as a replacement for ornithine and then just take the carbonyl > group and replace the oxygen with 2 hydrogens. > > I just renewed my registration. > > Thank You, Jesse Jaynes > > On Thu, Oct 6, 2016 at 3:22 PM, Jaynes, Jesse <jjaynes(a)mytu.tuskegee.edu> > wrote: > >> Hi Folks: >> >> I am interested in generating a 23 amino acid peptide with several >> ornithines present. Is it possible? If not can I construct it with >> glutamine as a replacement for ornithine and then just take the carbonyl >> group and replace the oxygen with 2 hydrogens. >> >> Thank You, Jesse Jaynes >> > >

2 3