- Chimera-users - RBVI Mailing Lists

AutoVina Dock gives very different results running from GUI/command line tool
by Mariana Assmann 14 Aug '18

14 Aug '18

Hi everyone, I am trying to do docking using the command line tool in chimera. I found that when I use the GUI opening Tools > Surface/Binding Analysis > AutoDock Vina and following the docking window, I get very similar results for the docking pose and score every time I run the docking. However, if I do the same with the command line tool (with the same parameters, box size, local version of vina, same dock prep), I get very different results: the ligand is never in a good docking position, always on a different side of the pocket, and sometimes even intercepts strands of the protein. The docking scores are also off. I am using using Chimera 1.13 (build 41780), AutoDock Vina 1.1.2 (May 11, 2011), and the following command line for docking: vina docking receptor protein ligand #1.2 output /home/mariana/GTN/docking/keap1/docking_test13 search_center -7,3,-30.32 search_size 19,21,21 backend local location /home/mariana/bin/vina num_modes 9 I also found that the command line does not accept any of the vina receptor or ligand options (e.g. receptor_addh) and gives me error messages when including those ("Keyword 'receptor_addh' doesn't match any known keywords") Does anyone what the problems for those issues could be? Thanks, Mariana

2 1

Fwd: Bad number format Xplor file format
by Tom Goddard 13 Aug '18

13 Aug '18

Using single-precision for XPLOR output fixed the problem > > From: ISHWOR POUDYAL > Hello Tom, > > Many thanks! I changed the double precision to single-precision and it works. > > Ishwor > > > On Monday, August 13, 2018, 12:09:15 PM CDT, Tom Goddard <goddard(a)sonic.net> wrote: > > > HI Ishwor, > > The XPLOR format requires lines where the first 12 columns holds the first number, the second 12 columns holds the second number, … 12 columns per number. The example lines you provide do not use 12 columns per number. The software that wrote that file is not writing it in the correct format. My guess is that software fails because of the 3 digit exponents (e.g "E-166”) — probably the writing software only fails to follow the 12 columns per number rule when you have 3-digit exponents. In single-precision (32-bit floats) you would never get 3 digit exponents and perhaps the error is that the writing program was converted from single precision to double precision. > > Tom > > >> On Aug 12, 2018, at 7:51 PM, ISHWOR POUDYAL <ishwor_p_19(a)yahoo.com <mailto:ishwor_p_19@yahoo.com>> wrote: >> >> Hello All, >> >> I try to convert electron density obtained from iterative phasing in *.xplor file format to view in the chimera. Something went wrong which I could not figure out. The generated density reads as follows for the first few lines. >> >> ########################################################## >> 241 -120 120 241 -120 120 241 -120 120 >> >> 3.26000E+02 3.26000E+02 3.26000E+02 9.00000E+01 9.00000E+01 9.00000E+01 >> >> ZYX >> >> 0 >> >> 2.21928E-166 0.00000E+00 1.59337E-167 0.00000E+00 1.14399E-168 0.00000E+00 >> >> 8.21346E-170 0.00000E+00 5.89700E-171 0.00000E+00 4.23386E-172 0.00000E+00 >> >> ############################################################# >> >> While I try to view the electron density in chimera it says >> "SyntaxError:Bad number format in line 2.21928E-166 0.00000E+00 1.59337E-167 0.00000E+00 1.14399E-168 0.00000E+00" >> >> WOuld you please help me out >> >> Many thanks >> _______________________________________________ >> Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> >> Manage subscription: http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users <http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users> >

1 0

Bad number format Xplor file format
by ISHWOR POUDYAL 13 Aug '18

13 Aug '18

Hello All, I try to convert electron density obtained from iterative phasing in *.xplor file format to view in the chimera. Something went wrong which I could not figure out. The generated density reads as follows for the first few lines. ########################################################## 241 -120 120 241 -120 120 241 -120 120 3.26000E+02 3.26000E+02 3.26000E+02 9.00000E+01 9.00000E+01 9.00000E+01 ZYX 0 2.21928E-166 0.00000E+00 1.59337E-167 0.00000E+00 1.14399E-168 0.00000E+00 8.21346E-170 0.00000E+00 5.89700E-171 0.00000E+00 4.23386E-172 0.00000E+00 ############################################################# While I try to view the electron density in chimera it says"SyntaxError:Bad number format in line 2.21928E-166 0.00000E+00 1.59337E-167 0.00000E+00 1.14399E-168 0.00000E+00" WOuld you please help me out Many thanks

3 2

Chimera for mac issue
by Yangfeng Li 13 Aug '18

13 Aug '18

Hello, I installed the latest version of chimera via your website on my mac (macbook air, 2013, hgih sierra). But it doesn't exist in my "application" file. And every time I need to double click chimera dmg file to launch it, which takss a very long long time verifying chimera. That process is different from Windows. I just wonder whether it's normal. Thanks, Yangfeng

2 1

Different center when display coordinates with bonds or ribbon
by 师扬 12 Aug '18

12 Aug '18

Dear chimera developers and users, Recently, I met a very strange issue about displaying coordinates in chimera. I found the helices were off-centered with the map, when I open a well refined PDB file and the map it was refined against, and keep an eye on the helices which is automatically displayed by Ribbon. But actually they are will aligned in COOT. And if I hide Ribbon and showed Atoms/Bonds, they were well-aligned. The attached files show the same region with different displaying modes. And I have tried several versions of chimera, the results were the same. Actually, I want to use Ribbon to display these helices. Does anyone know how to fix it? Thanks in advance! Yang

3 2

Animating peptide bond formation
by Alex Nazlidis 11 Aug '18

11 Aug '18

Dear Chimera users and staff, I've been thinking of ways to animate the formation of a peptide bond between two aminoacids but I haven't come up with a solution. Can you help me out here? :) Thanks in advance, Alex Nazlidis

2 1

problem with electron density map
by kesgin-schaefer＠chemie.uni-hamburg.de 07 Aug '18

07 Aug '18

Dear all, I have a problem with my electron density map: if I load the map in chimera, it will only show a subregion of the map and after "fit to model" the model will not be completely covered (see attachment). Any suggestions about how to solve the problem would be much appreciated. Thanks Steffi

3 4

Problem with FIndHBonds
by Nawel Mele 07 Aug '18

07 Aug '18

Dear Chimera Users I am using hbond command to determine hydrogen bonds between a receptor and multiple compounds with different conformations from a docking simulation. I used a cmd script to automatise the process however I am facing and error that I am not sure to understand. I just pasted follow the part of the reply log where the problem appeared. The problem here is that when I load the compound with the different docked conformations separatly it is not always the same conformation taht has this error so I don't know what is the real problem. Many thanks for your help. Nawel *Finding intermodel H-bondsFinding intramodel H-bondsConstraints relaxed by 0.4 angstroms and 20 degreesModels used: #0 Representative_confo_site_active_minimum_distance_state001.pdb #1 DB08734_1|LigPrep_output_named|sdf|8330|dock5H-bonds (donor, acceptor, hydrogen, D..A dist, D-H..A dist):#0 LYS 73.A NZ #1 UNK 1 O1 no hydrogen 2.924 N/A#0 ASN 76.A ND2 #1 UNK 1 N4 no hydrogen 2.398 N/A2 hydrogen bonds foundDB08734_1|LigPrep_output_named|sdf|8330|dock6 openeddonor: #0 ASN 76.A ND2 acceptor: #1 UNK 1 N4Traceback (most recent call last): File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/chimeraInit.py", line 683, in init chimera.openModels.open(a, prefixableType=1) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/chimera/__init__.py", line 1919, in open models = func(filename, *args, **kw) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/ChimeraExtension.py", line 35, in func processCommandFile(cmdFile) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/midas_text.py", line 108, in processCommandFile _processFile(f, emulateRead, filename) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/midas_text.py", line 143, in _processFile if makeCommand(line): File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/midas_text.py", line 69, in makeCommand f(c, args) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/FindHBond/ChimeraExtension.py", line 33, in cmdHBonds specInfo=[("spec", "models", "molecules")]) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/midas_text.py", line 451, in doExtensionFunc extFunc(*tuple(processedArgs), **kw) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/FindHBond/base.py", line 940, in createHBonds interSubmodel=interSubmodel, cacheDA=cacheDA) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/FindHBond/base.py", line 574, in findHBonds (donorAtom, donorHyds) + args):TypeError: accPhiPsi() takes exactly 8 arguments (9 given)Error while processing chimera_input_step2_bug.cmd:TypeError: accPhiPsi() takes exactly 8 arguments (9 given) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/FindHBond/base.py", line 574, in findHBonds (donorAtom, donorHyds) + args):See reply log for Python traceback.* -- Dr Nawel Mele, T: +33 (0) 634443794 (Fr) +44 (0) 7704331840 (UK)

2 1

Re: [Chimera-users] from govinda - How to save coordinates after rotation and translation fitted in cryo em map
by Elaine Meng 05 Aug '18

05 Aug '18

Dear Govinda, Please see the User’s Guide page on saving your data, and the links therein: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/savemodel.html> …including Save PDB <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/savemodel.html#pdb> ...write command <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/write.html> …saving after fitting <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/savemodel.html#afterfitting> It is recommended to send questions to chimera-users(a)cgl.ucsf.edu (CC’d here). You can also use Chimera menu: Help… Search Documentation. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Aug 4, 2018, at 11:22 AM, Govindasamy, Lakshmanan <lgovin(a)pennmedicine.upenn.edu> wrote: > > Dear Dr.Meng, > > How to save the coordinates in chimera after fitting into cryo em map. > i am having difficulty in save the coordinates > Please educate me how to save coordinates. > > thanks > govinda

1 0

question
by 许东 04 Aug '18

04 Aug '18

Dear editors: thank you for your excellent work. I had a problem. After i built my protein model, it was shown in software as:but when i tried to save the result, the output was displayed as so could you tell me how to solve this problem? look forward to your reply, thank you

2 2