- Chimera-users - RBVI Mailing Lists

problem with electron density map
by kesgin-schaefer＠chemie.uni-hamburg.de 07 Aug '18

07 Aug '18

Dear all, I have a problem with my electron density map: if I load the map in chimera, it will only show a subregion of the map and after "fit to model" the model will not be completely covered (see attachment). Any suggestions about how to solve the problem would be much appreciated. Thanks Steffi

3 4

Problem with FIndHBonds
by Nawel Mele 07 Aug '18

07 Aug '18

Dear Chimera Users I am using hbond command to determine hydrogen bonds between a receptor and multiple compounds with different conformations from a docking simulation. I used a cmd script to automatise the process however I am facing and error that I am not sure to understand. I just pasted follow the part of the reply log where the problem appeared. The problem here is that when I load the compound with the different docked conformations separatly it is not always the same conformation taht has this error so I don't know what is the real problem. Many thanks for your help. Nawel *Finding intermodel H-bondsFinding intramodel H-bondsConstraints relaxed by 0.4 angstroms and 20 degreesModels used: #0 Representative_confo_site_active_minimum_distance_state001.pdb #1 DB08734_1|LigPrep_output_named|sdf|8330|dock5H-bonds (donor, acceptor, hydrogen, D..A dist, D-H..A dist):#0 LYS 73.A NZ #1 UNK 1 O1 no hydrogen 2.924 N/A#0 ASN 76.A ND2 #1 UNK 1 N4 no hydrogen 2.398 N/A2 hydrogen bonds foundDB08734_1|LigPrep_output_named|sdf|8330|dock6 openeddonor: #0 ASN 76.A ND2 acceptor: #1 UNK 1 N4Traceback (most recent call last): File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/chimeraInit.py", line 683, in init chimera.openModels.open(a, prefixableType=1) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/chimera/__init__.py", line 1919, in open models = func(filename, *args, **kw) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/ChimeraExtension.py", line 35, in func processCommandFile(cmdFile) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/midas_text.py", line 108, in processCommandFile _processFile(f, emulateRead, filename) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/midas_text.py", line 143, in _processFile if makeCommand(line): File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/midas_text.py", line 69, in makeCommand f(c, args) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/FindHBond/ChimeraExtension.py", line 33, in cmdHBonds specInfo=[("spec", "models", "molecules")]) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/Midas/midas_text.py", line 451, in doExtensionFunc extFunc(*tuple(processedArgs), **kw) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/FindHBond/base.py", line 940, in createHBonds interSubmodel=interSubmodel, cacheDA=cacheDA) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/FindHBond/base.py", line 574, in findHBonds (donorAtom, donorHyds) + args):TypeError: accPhiPsi() takes exactly 8 arguments (9 given)Error while processing chimera_input_step2_bug.cmd:TypeError: accPhiPsi() takes exactly 8 arguments (9 given) File "/sge/packs/binaries_centos/chimera-1.11.2-CentOS6/share/FindHBond/base.py", line 574, in findHBonds (donorAtom, donorHyds) + args):See reply log for Python traceback.* -- Dr Nawel Mele, T: +33 (0) 634443794 (Fr) +44 (0) 7704331840 (UK)

2 1

Re: [Chimera-users] from govinda - How to save coordinates after rotation and translation fitted in cryo em map
by Elaine Meng 05 Aug '18

05 Aug '18

Dear Govinda, Please see the User’s Guide page on saving your data, and the links therein: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/savemodel.html> …including Save PDB <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/savemodel.html#pdb> ...write command <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/write.html> …saving after fitting <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/savemodel.html#afterfitting> It is recommended to send questions to chimera-users(a)cgl.ucsf.edu (CC’d here). You can also use Chimera menu: Help… Search Documentation. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Aug 4, 2018, at 11:22 AM, Govindasamy, Lakshmanan <lgovin(a)pennmedicine.upenn.edu> wrote: > > Dear Dr.Meng, > > How to save the coordinates in chimera after fitting into cryo em map. > i am having difficulty in save the coordinates > Please educate me how to save coordinates. > > thanks > govinda

1 0

question
by 许东 04 Aug '18

04 Aug '18

Dear editors: thank you for your excellent work. I had a problem. After i built my protein model, it was shown in software as:but when i tried to save the result, the output was displayed as so could you tell me how to solve this problem? look forward to your reply, thank you

2 2

Error from running headless Chimera
by Zhe Wang 03 Aug '18

03 Aug '18

Hi, I am trying to using headless Chimera on RedHat linux server 7.3 to produce some images. But I end up with a segmentation fault. Does anyone have an idea how it comes to this? The headless chimera is from https://www.cgl.ucsf.edu/chimera/download.html (64-bit daily build). The test code was taken without changes from https://www.cgl.ucsf.edu/chimera/docs/ProgrammersGuide/basicPrimer.html. Any ideas will be appreciated. Best, Zhe PS: OSMesa 11.2.2 has been installed. Executing chimera_surface.py... Processing 6c7m.pdb Opening 6c7m.pdb... #0, chain A: kemp eliminase KE07 6c7m.pdb opened Center of rotation: 0.867528 -1.77985 11.157 /software/chimera_headless/bin/mscalc 1.400000 2.000000 1 MSMSLIB 1.3 started on ebi-cli-002.ebi.ac.uk Copyright M.F. Sanner (March 2000) Compilation flags Surface 6c7m.pdb, category main, probe radius 1.4, vertex density 2 12 connected surface components Total solvent excluded surface area = 10612 component areas = 10035.4, 126.971, 97.9893, 90.9594, 38.157, 36.4953, 34.1487, 33.7557, 32.681, 30.3253, 29.9037, 25.222 Total solvent accessible surface area = 11324.6 component areas = 11265.5, 25.8506, 19.8737, 10.3135, 0.685134, 0.778238, 0.522429, 0.365982, 0.314644, 0.177358, 0.178001, 0.00214196 Surface 6c7m.pdb, category main has 12 components /software/chimera_headless/bin/mscalc 1.400000 10.000000 1 MSMSLIB 1.3 started on ebi-cli-002.ebi.ac.uk Copyright M.F. Sanner (March 2000) Compilation flags RESTART FROM TRI: 1 radius of atom 5 goes from 1.880000 to 1.980000 radius of atom 6 goes from 1.880000 to 1.980000 radius of atom 1569 goes from 1.420000 to 1.520000 Partial mode /software/chimera_headless/bin/mscalc 1.400000 10.000000 0 MSMSLIB 1.3 started on ebi-cli-002.ebi.ac.uk Copyright M.F. Sanner (March 2000) Compilation flags RESTART FROM TRI: 1 radius of atom 5 goes from 1.880000 to 1.980000 radius of atom 6 goes from 1.880000 to 1.980000 radius of atom 1569 goes from 1.420000 to 1.520000 Partial mode Calculation of some surface components failed. A single component of the surface was calculated correctly - the failure occurred for disconnected additional components such as inside bubbles. If the desired surface is already shown, there is no need for concern. However, if it is not shown, see below for possible fixes. Surface calculation frequently fails for large, multi-chain structures. The calculation may be successful if the chains are treated individually, by using the "split" command before generating a surface. If splitting is not desired or the structure is already a single chain, changing molecular surface parameters in the Selection Inspector or (before surface creation) the New Surfaces category of Preferences may allow the calculation to succeed. More details are given at http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/surfprobs.html Surface 6c7m.pdb, category main, probe radius 1.4, vertex density 10 1 connected surface components Total solvent excluded surface area = 10036.7 Total solvent accessible surface area = 11266.5 Surface 6c7m.pdb, category main has 1 components Rendering high resolution image... Segmentation fault

3 3

Activation buttons (namely "All")
by Eric Pettersen 01 Aug '18

01 Aug '18

Hi all, The activation buttons below the command line have an “All” button that works much the same way as the “activate all” button in the Model Panel works: if you check it on, then all models are activated for motion; if you check it off then the previous activation states are restored. It has been suggested that the behavior could instead be that when checked off all models would be deactivated (making it easier in some cases to go from moving all models to moving just one). I’m trying to find out if any users make strong use of the current behavior of that button and wouldn’t want it changed. Conversely, I wouldn’t mind hearing people who would really like to see the behavior switched. Regardless of the outcome of the discussion, the behavior of the corresponding Model Panel button would remain the same for a couple of reasons: 1) when clicked, the text of the button changes to “restore activities” so there’s less chance of confusion, and 2) there’s a separate “deactivate” button. I will interpret lack of feedback as “sure, go ahead”. :-) —Eric Eric Pettersen UCSF Computer Graphics Lab

1 0

fixed: error saving scene with independent rotation
by Elaine Meng 31 Jul '18

31 Jul '18

Hi Yanhe, The bug you reported a few days ago has been fixed! I just confirmed that with the current daily build of Chimera, you can now save scenes with independent rotation and use them in the Animation tool and in scripts. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

2 3

Is there any tool to write some calculated attribute into a header format?
by Sergio Garay 31 Jul '18

31 Jul '18

Hi All! I would like to know: Is there any way or tool to write some calculated attribute into a header format? I want to see the same color values obtained for some a calculated attribute projected onto a sequence. I have read in the chimera list the inverse process: exporting a header from a sequence window to be read as an attribute. Thank you in advance. -- *Sergio GarayDr. en Ciencias BiológicasFacultad de Bioquimica y Cs. BiológicasUniversidad Nacional del LitoralSanta Fe - ArgentinaC.C. 242 - Ciudad Universitaria - C.P. S3000ZAAArgentinaPh. +54 (342) 4575-213Fax. +54 (342) 4575-221 *

3 3

Fwd: Inquiry for new/re-registration license key_Arifuzzaman Sarder
by Elaine Meng 31 Jul '18

31 Jul '18

> From: Sarder Arifuzzaman <arifpharmju(a)gmail.com> > Subject: Inquiry for new/re-registration license key_Arifuzzaman Sarder > Date: July 31, 2018 at 9:08:53 AM PDT > To: chimera-announce-owner(a)cgl.ucsf.edu > > Hi > Greetings. > This is Arifuzzamman Sarder. I am an earlier user of chimera software tool. Recently I installed the updated version (v1.13). However, I could not draw any chemical structure by inputting canonical smiles or any other chemical ID in this tool. Even it can not capture any chemical structure from PDB, unlikely it is giving us only protein structure. Could you please let me know how can I revive this tool, so that I can use it for molecular docking and chemical structure as well. > Thank you very much in advance. I am looking forward for your response please. > Sincerely > Arifuzzaman, Sarder > PhD research fellow > Chung-Ang University > Mobile: 010-2654-2606 > E-mail: arifpharmju(a)gmail.com <mailto:arifpharmju@gmail.com> > Web: https://sarderarifuzzaman.wixsite.com/arif <https://sarderarifuzzaman.wixsite.com/arif> HI Arifuzzamman Sarder, (forwarding to the proper address for asking Chimera questions: chimera-users(a)cgl.ucsf.edu ) There is no reason it should not work as before. Chimera does not use a license key. For example, in Chimera 1.13, command: open pubchem:12123 (- or -) open smiles:C1CCNC1 …shows a small molecule in sticks, and command: open 2gbp … shows PDB entry 2GBP; protein ribbons with ligand (glucose) as sticks and nearby sidechains as sticks. If you mean that your Chimera 1.13 is not showing small molecules, or not showing sticks, I only have two ideas: (A) graphics/rendering problem of your computer or (B) New Molecules preferences was set to show only ribbons. To check (B), show Preferences from the Favorites menu, then change to category: New Molecules and check that the settings are what you want, and then click Save. The behavior I described is for the default, “smart initial display” true. If you had it false, and also had “show atoms” false, it would not show atoms when you open a structure. If you feel it is a bug, you can use menu: Help… Report a Bug and describe in detail what you did and what the problem is. However, if it is a graphics problem of your computer, it is not something we can fix. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Re: [Chimera-users] Extracting asymmetric unit
by Tom Goddard 31 Jul '18

31 Jul '18

Hi Martin, Fit an atomic model of the asymmetric unit then use volume zone (Volume Viewer menu entry Feature / Zone) then save the map (Volume Viewer / File / Same Map As…). See the maskZone option description in the volume save command for details https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/volume.html#output <https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/volume.html#output> Tom > On Jul 31, 2018, at 7:00 AM, Martin Moncrieffe <mcm35(a)cam.ac.uk> wrote: > > Hi Tom, > > A quick question. I have a helical reconstruction (EM) and would like to extract the density for the asymmetric unit from the map. How does one do this? > > Best. > > __martin > >

1 0