- Chimera-users - RBVI Mailing Lists

color zone on command line
by Kyle Morris 24 Dec '16

24 Dec '16

Hi Chimera dev, Following on from this post back from 2009: http://plato.cgl.ucsf.edu/pipermail/chimera-users/2009-January/003514.html <http://plato.cgl.ucsf.edu/pipermail/chimera-users/2009-January/003514.html> How would one also split map in this python script? Thanks! Kyle

2 1

Re: [Chimera-users] Chimera-users Digest, Vol 164, Issue 26
by Healey, Joe 23 Dec '16

23 Dec '16

I might be able to offer a bit of help here, the Chimera team and Jaime helped me with basically this exact problem. I have a script here https://github.com/jrjhealey/bioinfo-tools/blob/master/strucfit.py that you could take from. You'll probably want to look specifically at lines 216-240. (Note - you'll also need to look at the relevant module imports for match and pychimera etc. The script will need Jaime's implementation of pychimera too (he's super helpful!) https://github.com/insilichem/pychimera The script gives output as below, as the script automatically finds the best matching PDB file (that's what the first 150 lines or so is looking for), there is additional information there. Best Model I'm Hit Comparing RMSD Assorted homology metrics 2k4r PAK_01796_model5.pdb 2.81843275676 37.5 13 0.00035 21.5 2k4r PAK_01796_model4.pdb 12.6869844869 37.5 13 0.00035 21.5 2k4r PAK_01796_model3.pdb 14.4133021316 37.5 13 0.00035 21.5 2k4r PAK_01796_model1.pdb 0.459177533295 37.5 13 0.00035 21.5 2k4r PAK_01796_model2.pdb 15.1861411912 37.5 13 0.00035 21.5 Hope that's useful! Happy to offer more help (though I'm sure the chimera team have it covered!) Joe M.Sc. B.Sc. (Hons) MSRB PhD Student MOAC CDT, Senate House University of Warwick Coventry CV47AL Mob: +44 (0) 7536 042620 | Email: J.R.J.Healey(a)warwick.ac.uk Jointly working in: Waterfield Lab<http://www2.warwick.ac.uk/fac/med/research/tsm/microinfect/staff/waterfield…> (WMS Microbiology and Infection Unit) and the Gibson Lab<http://www2.warwick.ac.uk/fac/sci/chemistry/research/gibson/gibsongroup/> (Warwick Chemistry) Twitter: @JRJHealey<https://twitter.com/JRJHealey> | Website: MOAC Page<http://www2.warwick.ac.uk/fac/sci/moac/people/students/2013/joseph_healey> | ORCID: orcid.org/0000-0002-9569-6738 ________________________________ From: chimera-users-bounces(a)cgl.ucsf.edu <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of chimera-users-request(a)cgl.ucsf.edu <chimera-users-request(a)cgl.ucsf.edu> Sent: 22 December 2016 20:00 To: chimera-users(a)cgl.ucsf.edu Subject: Chimera-users Digest, Vol 164, Issue 26 Send Chimera-users mailing list submissions to chimera-users(a)cgl.ucsf.edu To subscribe or unsubscribe via the World Wide Web, visit http://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users or, via email, send a message with subject or body 'help' to chimera-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimera-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of Chimera-users digest..." Today's Topics: 1. Saving Output From Match Align (Muk, Sanychen) ---------------------------------------------------------------------- Message: 1 Date: Thu, 22 Dec 2016 16:11:00 +0000 From: "Muk, Sanychen" <smuk(a)coh.org> To: "chimera-users(a)cgl.ucsf.edu" <chimera-users(a)cgl.ucsf.edu> Subject: [Chimera-users] Saving Output From Match Align Message-ID: <A69D81CB04F0734E96302AA9E36F9B233E521BEE(a)ppwexch2kx03.coh.org> Content-Type: text/plain; charset="iso-8859-1" Hello, I'm working on a script to superimpose pdb structures onto one another and then run the match -> align tool to align them to get the RMSD between residues of the pdb structures. I know that from the multialign interviewer window, I can then go to structure acess match and then save the attributes as a text file that will contain the residue number and RMSD. Is there a command that I can use to output this attributes file automatically? Thank you, and happy holidays. Best, Sanychen Muk --------------------------------------------------------------------- *SECURITY/CONFIDENTIALITY WARNING: This message and any attachments are intended solely for the individual or entity to which they are addressed. This communication may contain information that is privileged, confidential, or exempt from disclosure under applicable law (e.g., personal health information, research data, financial information). Because this e-mail has been sent without encryption, individuals other than the intended recipient may be able to view the information, forward it to others or tamper with the information without the knowledge or consent of the sender. If you are not the intended recipient, or the employee or person responsible for delivering the message to the intended recipient, any dissemination, distribution or copying of the communication is strictly prohibited. If you received the communication in error, please notify the sender immediately by replying to this message and deleting the message and any accompanying files from your system. If, due to the security risks, you do not wi! sh to receive further communications via e-mail, please reply to this message and inform the sender that you do not wish to receive further e-mail from the sender. (fpc5p) ---------------------------------------------------------------------

1 0

Saving Output From Match Align
by Muk, Sanychen 22 Dec '16

22 Dec '16

Hello, I'm working on a script to superimpose pdb structures onto one another and then run the match -> align tool to align them to get the RMSD between residues of the pdb structures. I know that from the multialign interviewer window, I can then go to structure acess match and then save the attributes as a text file that will contain the residue number and RMSD. Is there a command that I can use to output this attributes file automatically? Thank you, and happy holidays. Best, Sanychen Muk --------------------------------------------------------------------- *SECURITY/CONFIDENTIALITY WARNING: This message and any attachments are intended solely for the individual or entity to which they are addressed. This communication may contain information that is privileged, confidential, or exempt from disclosure under applicable law (e.g., personal health information, research data, financial information). Because this e-mail has been sent without encryption, individuals other than the intended recipient may be able to view the information, forward it to others or tamper with the information without the knowledge or consent of the sender. If you are not the intended recipient, or the employee or person responsible for delivering the message to the intended recipient, any dissemination, distribution or copying of the communication is strictly prohibited. If you received the communication in error, please notify the sender immediately by replying to this message and deleting the message and any accompanying files from your system. If, due to the security risks, you do not wish to receive further communications via e-mail, please reply to this message and inform the sender that you do not wish to receive further e-mail from the sender. (fpc5p) ---------------------------------------------------------------------

2 1

ChimeraX daily builds available!
by Elaine Meng 22 Dec '16

22 Dec '16

Prerelease daily builds of UCSF ChimeraX are now available to the public! UCSF ChimeraX home: http://www.rbvi.ucsf.edu/chimerax/ Download: http://www.rbvi.ucsf.edu/chimerax/download.html Please keep in mind that ChimeraX features are currently quite limited, that ChimeraX may not work on older machines and/or graphics cards, and that due to the upcoming holidays, responses may be slow if you contact us. On behalf of the Chimera/ChimeraX team, Elaine ---------- Elaine C. Meng, Ph.D. UCSF Computer Graphics Lab (Chimera team) and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

change default color maps
by Michał Kadlof 21 Dec '16

21 Dec '16

I found Palette Editor Tool, but I don't know how to use it. How can I apply chosen pallete in Surface Color Tool or load colors from palette into rainbow tool? -- pozdrawiam serdecznie Michał Kadlof <m.kadlof(a)cent.uw.edu.pl>

2 1

Crossfade and disp
by Daniel Asarnow 21 Dec '16

21 Dec '16

Hello Chimera experts, Here is another movie making question. I noticed that disp and ~disp trigger frames to be recorded, without a call to wait. For example: disp #2 movie crossfade 25 ~disp #2 disp #3 This would produce a movie that crossfades from model #2 to blank, with #3 suddenly appearing. To get crossfades between two ligands, I had to use: disp #2 movie crossfade 25 perframe "~disp #2" frames 1 disp #3 movie crossfade 25 Based on the documentation I wasn't sure if this was intended behavior or a bug. Did I miss a more elegant way to crossfade between two models? Thanks, -da

3 3

Multiscale models command
by Ian Holmes 20 Dec '16

20 Dec '16

Hello Chimera gurus, I am using multiscale models to view a virus capsid (PDB 2QA0) in Chimera. I would like to create a Python script to render the capsid as a multiscale model and then highlight (i.e. select) certain residues. However, I can't figure out the command-line syntax to create a multiscale model. The docs also suggest the Midas Python module as an alternative way of scripting Chimera in Python, but I haven't yet found that module. Here is the rough order of what I am doing from the graphical user interface: Open model 2QA0 Tools menu -> Higher-order structure -> Multiscale Models panel (The following actions are all in the Multiscale Models panel) Click "Make models" button in "Models from molecules and matrices" section Click "All" button in "Select chains:" section Click "Hide" button in "Act on selected chains" section, "Selected chains" subsection Click "All" button in "Select chains:" section (again) Select "Ribbon" from "Style" menu in "Act on selected chains" section (then back to the main view) Zoom out (with mouse wheel) Favorites menu -> Command Line Type "select :10,20,30" (amino acids I want to highlight) Here is what I've got so far in terms of equivalent Python code: import os from chimera import runCommand as rc rc("open 2QA0") # make multiscale model here? rc("select :10,20,30") # select some residues Your help would be appreciated - thanks! Ian

3 3

(no subject)
by Kartheek 19 Dec '16

19 Dec '16

Hi UCSF CHIMERA users, I am trying to make a movie in chimera using MD movie and pdb option. However I have been stumbled with the following error "Residue 256.C not in first model on line 20792 of /tmp/tmpvr4a2t.pdb". I do not have any end records, how can I rectify the error ?? -- Sincerely, P.Kartheek, Research Scholar, IIIT-H, Hyderabad, INDIA.

2 2

Surface clip coloring
by Michał Kadlof 16 Dec '16

16 Dec '16

How can color volume by value with binning several values into single color? I achived the effect partialy by opening several times the same map. set different thresholds and colors to each one and playing with Per-Model Clipping tool, but it have some drawbacks. Planes can't be at exact same level because I observe artifacts. So I tried to move slightly inner layers upp, but still I observe "staris" effect. I also tried with Surface color tool, but it uses interpolation and blends colors togather. In other words I need something like this: https://1.bp.blogspot.com/-5B5ueLHCBPY/T4II4IddvwI/AAAAAAAAB_w/rYwqsJNldY0/… instead of something like this: https://i.stack.imgur.com/hQmry.png -- pozdrawiam serdecznie Michał Kadlof <m.kadlof(a)cent.uw.edu.pl>

2 1

probably a bug
by Michał Kadlof 16 Dec '16

16 Dec '16

Hello, I visualize density of my data two different way with the same thresholds and observe different sizes of regions. Isn't it a bug? -- pozdrawiam serdecznie Michał Kadlof <m.kadlof(a)cent.uw.edu.pl>

2 1