- Chimera-users - RBVI Mailing Lists

Regarding issue detected while running chimera
by Suman Dhungel 26 Jun '23

26 Jun '23

Dear concerned one, I have been using UCSF Chimera from another device for the past 10 years. Recently I tried to operate chimera-1.17.1 on my computer. I have been facing a repeated issue that has been reported below. I tried to reinstall however, the issue persisted. I even tried with the new version (Chimera alpha ), similar issue with that as well. [image: chimera error.JPG] [image: my device.JPG] Would you please help... Regards Suman...

2 1

Error while startup
by Ramanakishore V.S 26 Jun '23

26 Jun '23

Respected sir I have downloaded the Chimera V 1.17.1 on my Laptop. But when I try to open it, I am getting an error code -1073741819. I tried multiple options and sources but couldn't fix it.So can you please look into it. I have attached a image of the error message Thank you

2 1

Re: Seeking help with Chimera regarding superposition of multiple structures
by Elaine Meng 25 Jun '23

25 Jun '23

> On Jun 25, 2023, at 7:21 AM, Vaibhav Anand <dvaibhav(a)iitk.ac.in> wrote: > > Respected Mam, > I hope this email finds you well. I am seeking your assistance in resolving a problem I am currently facing. > > I have performed the Molecular dynamic simulation of the UBA domain (PDB ID - 1OQY), and for analysis, I've extracted the 11 PDB structures at [500ns - 1000ns with steps of 50ns], and I've one reference structure (em.gro - energy minimized structure). > > I want to superimpose 11 structures with respect to my reference structure and compute the RMSD corresponding to helical residues (162-172, 177-187, 192-197). > > I am aware that in Chimera, an in-built tool called Matchmaker can perform the superimposition for multiple structures, but it doesn't have an option for selecting required (helical) residues. > > I've tried using the command line but cannot select the C-alpha atoms of helical residues. I've used the following commands - > > >>mm #0:162-172, 177-187, 192-197@CA #1-11:162-172, 177-187, 192-197@CA (Error - "Invalid atom specifier syntax: '177-187,'") > > >> mm #0:162-172, 177-187@CA #1-11:162-172, 177-187@CA (Error - "Invalid atom specifier syntax: '177-187@CA'") > > However, the following command is running well - > > >>mm #0:162-172@CA #1-11:162-172@CA (Output - "RMSD between 11 pruned atom pairs is 0.607 angstroms; (across all 11 pairs: 0.607)") > > I've also checked the atom specifications from the documentation for further guidance. - Atoms specifications > > I kindly request your assistance in resolving this issue. > Thank you for your attention. > Regards, > Vaibhav Anand Dear Vaibhav Anand, Questions about using Chimera should be sent to chimera-users(a)cgl.ucsf.edu CC'd here. <https://www.rbvi.ucsf.edu/chimera/docs/feedback.html> If you want to specify the exact atoms to use yourself, then the command is "match" (not "matchmaker" or "mm"). See "match" and also the discussion of different superposition methods. <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/match.html> <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/superposition.html> You are also giving wrong atom specifications. They should not have spaces after the commas. I.e. should be something like the following. match #0:162-172,177-187,192-197@CA #1-11:162-172,177-187,192-197@CA Command-line specification: <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/atom_spec.html#basic> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

regarding movie making
by lumbini yadav 22 Jun '23

22 Jun '23

2 1

Support for saving pdb files with 2 models in the same file using command line
by Raquel Cossío Ramírez 20 Jun '23

20 Jun '23

Hello Chimera team, I have been working with docking files obtained from cluspro and I'm working on a set of commands to open the files in chimera, perform a ksdssp and save them in a single individual file. The problem that I have found while doing it was that secondary structure was not well calculated for the second model, so when I run the save (write) command, I only obtain a file with 1 molecule and it does not include the MODEL 1 nor MODEL 2 header, which I need it so I can analyze it later. Here I send the code that I have been running (save_all.py) with the command and a log of the problems it present while running, as well as an example input (model.000.00.pdb) and output file (ch_model.000.00.pdb) that this code produces. Also, an example of the files that I would like to generate is included in ch_model.000.00_manually.pdb The save_all.py runs in the Ubuntu terminal as follows: chimera --nogui save_all.py I believe that the code could be improved by adding an option to "save multiple files in a single file" as the GUI can allow, but using the command line, I could not find that option. I would really appreciate if you had some insight about how it could be solved. Thank you for your attention and I wait for your prompt response. Raquel Cossío Ramírez Corelab Genomics at Tecnológico de Monterrey

2 3

Solvent Accessible Surface Area results
by Abril Gijsbers 15 Jun '23

15 Jun '23

Hi, I calculated the SASA from an AlphaFold model and a homology model with Chimera. Some of the residues got a value of zero and I just wanted to know if that means that those residues are not accessed to the solvent at all or could be a problem in the calculation? Best regards, Abril

2 2

How to tile different models without tiling submodels
by 夏前程 13 Jun '23

13 Jun '23

Hi, I want to use chimera to depict two conformation ensembles. Each conformation ensemble is a model, and each conformation in that ensemble is the submodel within that One of the possible way I've found to do that is to use tile command (tile #1-2.*). However, that command will consider each submodel (each molecule) instead of each model (each cluster) as a whole. So I am wondering if there is any solution or suggestion? With Regards, Qiancheng Xia National Institute of Biological Sciences Beijing, China 2023/6/13

2 1

Re: Server problem ??
by Eric Pettersen 13 Jun '23

13 Jun '23

It seems you are in fact using Chimera 1.16. Web services only work with 1.17.1 on Windows. --Eric > > I just got the following error trying to run a python script that includes sequence alignments: within Chimera (1.17) > > TransportError: HTTP Error 404: Not Found > > Typically, if you get a TypeError, it's a problem on the remote server > and it should be fixed shortly. If you get a different error or > get TypeError consistently for more than a day, please report the > problem using the Report a Bug... entry in the Help menu. Please > include the traceback printed above as part of the problem description. > Traceback from web application request: > Traceback (most recent call last): > File "C:\Program Files\Chimera 1.16\share\WebServices\appWebService.py", line 48, in _initApp > self.backend = Backend(service, url) > File "C:\Program Files\Chimera 1.16\share\WebServices\opal_client.py", line 21, in __init__ > raise NonChimeraError("Web service appears " > NonChimeraError: Web service appears to be down. See Reply Log for more details. > > Ix this a problem with the server used to run the alignment ?? > > > Thanks > > Hernando > > _______________________________________________ > Chimera-users mailing list -- chimera-users(a)cgl.ucsf.edu <mailto:chimera-users@cgl.ucsf.edu>: To unsubscribe send an email to chimera-users-leave(a)cgl.ucsf.edu <mailto:chimera-users-leave@cgl.ucsf.edu> > Manage subscription:

1 0

REMINDER: Chimera website downtime
by Elaine Meng 13 Jun '23

13 Jun '23

REMINDER: Due to a scheduled power outage at UCSF followed by server upgrades, the Chimera website and web services will be unavailable -- the estimated downtime is from Tuesday May 16 8pm PDT through Wednesday May 17 8pm PDT. This upgrade will remove the Opal web services used by older versions of Chimera. Therefore, to continue using the Chimera tools running BLAST protein, Modeller comparative and loop modeling, and multiple sequence alignment with Clustal Omega and MUSCLE web services, you will need to upgrade to Chimera 1.17 (Mac) and 1.17.1 (Windows/Linux). Please pardon any inconvenience. Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

3 2

getcrd command
by Yanhe Zhao 09 Jun '23

09 Jun '23

Greeting there, I am trying to get coordinate for fulcrum selection in cryoSPARC. I use volume tracer place a marker on the position of map density I wanted, with the maker selected, I use getcrd command report the coordinate in xyz in Angstroms, when I divide the values by the pixel size, the xyz in voxels are make no sense, as they are larger than my volume size. Like my volume size is 1024^3, got coordinates in Angstroms 2100,2100,2000, my pixel size is 1.475. Could you please anyone help me out? Do I did something wrong? Thanks and best, Yanhe

2 4