- Chimera-users - RBVI Mailing Lists

Re: [Chimera-users] surface/4623 (Chimera surfacing failure)
by Eric Pettersen 09 Oct '07

09 Oct '07

Hi Jeff, Chimera doesn't communicate depth-cuing/fog info to POV-Ray yet. I will open a bug report about it with you included on the recipient list. What you may want to do in the interim to get a better looking image is to reposition the lights in the scene to reduce the shadows. You use Tools->Viewing->Lights to bring up the interface for position the key (bright) and fill (dim) lights. I've attached two images where I've done that. In both the key light is just slightly overhead and centered. The fill light in one is coming from slightly below and centered, and in the other the fill light is off (you have to go to the "advanced" section of the lighting interface to turn off lights). --Eric

1 0

Re: [Chimera-users] dock-prep problem with Zn and K ions
by Eric Pettersen 08 Oct '07

08 Oct '07

Hi Joe, If you care about the protonation of the SHH ligand in that structure then I would actually recommend you use one of the new test builds (follow the "Test Builds" link off the Chimera home page). There have been improvements since the 1.2422 release in protonating atoms involved in coordination complexes, and in protonating ring nitrogens in non-standard residues (though the latter isn't directly relevant in your case). --Eric On Oct 8, 2007, at 12:17 PM, zzj wrote: > Hi Eric, > Sorry for the mess. The old Chimera version is 1.2259. > I just downloaded the latest version (1.2422). It works perfectly fine > the same PDB. Guess I'll stick to this version. > thanks a lot. > -Joe > > On 10/8/07, zzj <zzjsail(a)gmail.com> wrote: >> Hi Eric, >> thanks for your reply. I am using PDB 2PQO. The Chimera version is >> beta version 1 build 2259 2006/07/11 >> platform: darwin >> windowing system: aqua >> I am working on a Mac OS X 10.4.10 (G5). It seems Chimera works fine >> other than the problem I mentioned. >> -Joe >> >> On 10/8/07, Eric Pettersen <pett(a)cgl.ucsf.edu> wrote: >>> I can run Dock Prep on a PDB file containing zinc (1zip) without >>> the problem >>> you're getting. Can you tell me what PDB you're using, and what >>> version of >>> Chimera? >>> >>> --Eric >>> >>> >>> >>> Eric Pettersen >>> >>> UCSF Computer Graphics Lab >>> >>> pett(a)cgl.ucsf.edu >>> >>> http://www.cgl.ucsf.edu >>> >>> On Oct 8, 2007, at 10:54 AM, zzj wrote: >>> >>> Hi there, >>> I am preparing dock6 files in Chimera using the Dockprep option. The >>> Zn and K ions in the PDB files are giving me problems at the >>> point of >>> adding hydrogen. Everthing works fine if I remove these ion atoms. >>> Here is the Chimera Error message: >>> AttributeError: addHinfoDialog instance has no attribute >>> "cancerlCB". >>> I can select and highlight these ions without problem. I tried to >>> give >>> different names for the ions. Nothing worked. >>> Any suggestion is highly appreciated! >>> -Joe >>> _______________________________________________ >>> Chimera-users mailing list >>> Chimera-users(a)cgl.ucsf.edu >>> http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users >>> >>

1 0

dock-prep problem with Zn and K ions
by zzj 08 Oct '07

08 Oct '07

Hi there, I am preparing dock6 files in Chimera using the Dockprep option. The Zn and K ions in the PDB files are giving me problems at the point of adding hydrogen. Everthing works fine if I remove these ion atoms. Here is the Chimera Error message: AttributeError: addHinfoDialog instance has no attribute "cancerlCB". I can select and highlight these ions without problem. I tried to give different names for the ions. Nothing worked. Any suggestion is highly appreciated! -Joe

2 1

End graphical representation from Dock tutorials
by Francesco Pietra 08 Oct '07

08 Oct '07

I carried out all Dock6.1 tutorials with the aid of Chimera 1.2422 and DMS. The relevant files used for, and got from, the flexible-ligand docking tutorial are attached. I believe I used defaults. The out file attached is the one of the four out files (from mpirun -np 4 ....) that seems to me to be relevant. How to view graphically the best scored ligand from flex_scored.mole2 in the protein? Just combine flex_scored.mole2 with the ligand-deprived receptor? This in view of my project of looking for docking between a family of lypophilic natural products (conformationally studied in vacuum with Amber9 simulated annealing) and a complex, large protein. I.e., by carrying out a process of the type illustrated by the docking tutorial for each pocket of the protein. I know there is interaction between the two (though a mere disassembling of the lipid bilayer can't be rigorously ruled out yet) but no idea where. Thanks francesco pietra ____________________________________________________________________________________ Catch up on fall's hot new shows on Yahoo! TV. Watch previews, get listings, and more! http://tv.yahoo.com/collections/3658

2 1

Protein RMSD
by Elaine Meng 05 Oct '07

05 Oct '07

Hi John and everybody, I forgot to mention the following additional ways to calculate RMSD in Chimera if you are working with a conformational ensemble (different conformations/configurations of the same set of atoms): - if the ensemble is opened as a trajectory in MD Movie, you can calculate an all-by-all RMSD map http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/movie/ framemovie.html (go to the "RMSD Analysis" section) ... also covered in a tutorial http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/ ensembles2.html#part2 - if the ensemble is present as multiple MODELs within a single PDB file opened the normal way in Chimera, you could use the EnsembleMatch tool http://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/ ensemblematch/ensemblematch.html ... also covered in a tutorial http://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/ ensembletut.html I don't know if these pertain to the original question, but I mention them for completeness. Best, Elaine ----- Elaine C. Meng, Ph.D. meng(a)cgl.ucsf.edu UCSF Computer Graphics Lab and Babbitt Lab Department of Pharmaceutical Chemistry University of California, San Francisco http://www.cgl.ucsf.edu/home/meng/index.html

1 0

Generating Spheres tutorial
by Francesco Pietra 05 Oct '07

05 Oct '07

I am running Chimera 1.2422 on a Linux desktop and DOCK6.1 and DMS on a scp-linked Linux parallel machine. Following the "Generating Spheres" tutorial of dock, I verified that DMS works correctly. Though, I am unable with Chimera to visualize properly the rec.ms and sphere_cluster.pdb (the files I have generated are identical to those downloaded). With rec.ms I am unable to visualize the small molecule inside the protein. With sphgen_cluster.pdb I can only see disconnected pieces, thogh placed as expected from the tutorial. Clearly, I need to pass to a Chimera tutorial. Which one(s) for the case in point? I apologize for the pedestrian questions. Though, coming from organic chemistry and ab initio calculations, I am finding Amber9, DOCK6.1, DMS, and Chimera no minor burden. Quite interesting, however. Thanks francesco pietra ____________________________________________________________________________________ Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. http://mobile.yahoo.com/go?refer=1GNXIC

2 1

Re: [Chimera-users] How to "Align" two atoms
by Thomas Goddard 04 Oct '07

04 Oct '07

Hi Matt, Many Chimera commands are defined in chimera/share/Midas/__init__.py They are sometimes a pain to call from Python. Here is some code for the align command. Tom from chimera import openModels, selection m = openModels.list()[0] sel = selection.ItemizedSelection() sel.add(m.atoms[0:2]) from Midas import align align(sel) Matthew Baker wrote: > I'm writing a module. I've created a model and added it to the open > models. How can I reproduce the command-line function > > align #1:1 #1:2 > > The variable names for my two atoms are newModel.atoms[0] and > newModel.atoms[1]. > > Thanks, > Matt >

2 2

Fit map in map
by src9697 04 Oct '07

04 Oct '07

Hello, I was just searching the archieves and I understand now that my last question was alittle dumb (i.e. the x,y,z rotation angles are not helpful). In this case does the "Rotation angle" and the " Axis" define a single rotation that transforms the "Fit map" to the "with in" map. Can I draw the axis using a .bild file (i.e .arrow with start and end coords given by axis and axis point). if I want to compare several maps to one reference, is it possible to define a single axis for them all? such that i can compare them all just by the magnitude of the rotation? does this make sense? thanks in advance sean

2 1

Fit map in map
by src9697 04 Oct '07

04 Oct '07

Hello, I was wondering if it is possible to use the output (translation matrix, axis, ect.) from the "Fit map in map" command to obtain the angles of rotation around the x, y and z axis given an arbitrary origin (i.e. the center of the map). thanks sean

1 0

Protein RMSD
by Beale, John 03 Oct '07

03 Oct '07

Is there any feature in Chimera that will allow the calculation of the RMSD between a protein and a reference structure? Thanks! John Beale

2 1