- Chimera-users - RBVI Mailing Lists

Manually assigning secondary structure to residues
by Oren Shalev 16 Aug '07

16 Aug '07

Dear Chimera team and users, I'm modeling chains with gaps using in-house software. When opening in Chimera a model in which a secondary structure element is broken or flanked by the start/end of a gap, the secondary structure of the residue adjacent to the gap is assigned to be 'coil'. I guess this is expected, since one needs to know both Phi and Psi angles to determine the secondary structure of a given residue, yet I always have knowledge that the residue adjacent to the gap does indeed belong to a secondary structure element. My question is this: is there a way to assign the secondary structure of a given residue to either 'helix' or 'strand'? I'm interested in this for imaging purposes, so potential negative consequences on other aspects of Chimera's operation (perhaps on analysis tools?) don't matter to me. Thank you, Oren

2 1

sym command in Chimera
by Z. Nevin Gerek 15 Aug '07

15 Aug '07

Dear Chimera team, I am trying to use sym command to generate symmetry related copy of a protein. I followed this link: http://www.cgl.ucsf.edu/chimera/experimental/symmetrycopies/ symcopies.html The version I am using is 1.2422. When I write sym, I get this error: "unrecognized command: "sym" Then I found this link http://www.cgl.ucsf.edu/pipermail/chimera- users/2005-September/000464.html and put necessary files to Chimera.app/Contents/Resources/share folder. Then I restart Chimera, I get same error. Is there another way to use sym command in Chimera? Thanks for your help, Z. Nevin Gerek, Ph.D. Postdoctoral Fellow ----------------------------------------------------- The Center for Biological Physics Arizona State University PO Box 871504 Tempe, AZ 85287-1504 Phone: (480) 727-8897 nevin.gerek(a)asu.edu On Aug 11, 2007, at 12:00 PM, chimera-users-request(a)cgl.ucsf.edu wrote: > Send Chimera-users mailing list submissions to > chimera-users(a)cgl.ucsf.edu > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.cgl.ucsf.edu/mailman/listinfo/chimera-users > or, via email, send a message with subject or body 'help' to > chimera-users-request(a)cgl.ucsf.edu > > You can reach the person managing the list at > chimera-users-owner(a)cgl.ucsf.edu > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Chimera-users digest..." > > > Today's Topics: > > 1. transposing a pdb structure ("copy & paste") (Ben Keshet) > 2. Re: transposing a pdb structure ("copy & paste") (Elaine Meng) > 3. Re: transposing a pdb structure ("copy & paste") (Eric > Pettersen) > 4. Re: chimera on AMD workstation (Vinay Kumar) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 10 Aug 2007 15:53:33 -0400 > From: "Ben Keshet" <keshet1(a)umbc.edu> > Subject: [Chimera-users] transposing a pdb structure ("copy & paste") > To: <chimera-users(a)cgl.ucsf.edu> > Message-ID: <000001c7db88$238da8b0$29ad5582@umbc80a173302c> > Content-Type: text/plain; charset="us-ascii" > > Dear Chimera fans and team, > > I have a pdb file of a fragment of an amyloid fibril constructed of > 8 layers > (8 parallel strands of beta sheet). I would like to overcome the end > effects when modeling it, so I would like extend the existing > structure by > duplicating it at its end. > > Does Chimera has a tool do the following: duplicate existing pdb > molecule > coordinates, position the duplicated molecule at a desired > location, and > then align it reasonably with respect to the original molecule? > > Thank you very much for your time and help. > > Ben > > > > > ------------------------------ > > Message: 2 > Date: Fri, 10 Aug 2007 16:04:20 -0700 > From: Elaine Meng <meng(a)cgl.ucsf.edu> > Subject: Re: [Chimera-users] transposing a pdb structure ("copy & > paste") > To: "Ben Keshet" <keshet1(a)umbc.edu> > Cc: chimera-users(a)cgl.ucsf.edu > Message-ID: <8f3e5fad823ed51cc9da3fa7677864cc(a)cgl.ucsf.edu> > Content-Type: text/plain; charset=US-ASCII; format=flowed > > Dear Ben, > Chimera doesn't have the ability to figure out for you the proper > position of one copy relative to another. You could open multiple > copies, perform manual positioning, and then write out all the > coordinates, but I imagine it might be difficult to get the right > position of one copy relative to another, even manually/interactively. > > To manually position a structure relative to another, you could > interactively rotate/translate and/or use the "move" (translation) and > "turn" (rotation) commands. You can freeze/unfreeze a copy using the > Active checkbox in the Model Panel (in the Favorites menu by default), > the command "select," or the little checkboxes under the Command Line > (also under Favorites). > > If you did manage to position copy 2 relative to copy 1 to your > liking, > you could write the transformation matrices out (see "matrixget" > command). From those you could calculate the transformation of 2 > relative to 1 and also generate appropriate matrices that would then > position 3, 4, ... correctly (see "matrixset" command). I admit I > don't know how to do those calculations. Anyone? > > Yet another snag depends on how you will be using these coordinates. > Does it require all the PDB files to be merged into one? If so, can > they be in a multi-MODEL form, or in a single model? Chimera can > output separate PDB files or a single multi-MODEL PDB file. If you > need all the coordinates to be in one model, however, you would > have to > edit the PDB output from Chimera so there are not atoms with duplicate > atom numbers and chain IDs. However, it all depends on what the > *next* > program you will be using requires and expects. If you will just be > using Chimera, however, no further editing would be required (in fact, > you could just save a session rather than writing out coordinates). > > Maybe someone else will have a smarter and less discouraging set of > suggestions! Best, > Elaine > > On Aug 10, 2007, at 12:53 PM, Ben Keshet wrote: > >> Dear Chimera fans and team, >> >> I have a pdb file of a fragment of an amyloid fibril constructed of 8 >> layers >> (8 parallel strands of beta sheet). I would like to overcome the end >> effects when modeling it, so I would like extend the existing >> structure by >> duplicating it at its end. >> >> Does Chimera has a tool do the following: duplicate existing pdb >> molecule >> coordinates, position the duplicated molecule at a desired location, >> and >> then align it reasonably with respect to the original molecule? >> >> Thank you very much for your time and help. >> >> Ben > > > > ------------------------------ > > Message: 3 > Date: Fri, 10 Aug 2007 16:53:36 -0700 > From: Eric Pettersen <pett(a)cgl.ucsf.edu> > Subject: Re: [Chimera-users] transposing a pdb structure ("copy & > paste") > To: Ben Keshet <keshet1(a)umbc.edu> > Cc: Chimera BB <chimera-users(a)cgl.ucsf.edu> > Message-ID: <E5C1411A-58C1-49A8-8899-24816E53E043(a)cgl.ucsf.edu> > Content-Type: text/plain; charset="us-ascii" > > On Aug 10, 2007, at 4:04 PM, Elaine Meng wrote: > >> To manually position a structure relative to another, you could >> interactively rotate/translate and/or use the "move" (translation) >> and >> "turn" (rotation) commands. You can freeze/unfreeze a copy using the >> Active checkbox in the Model Panel (in the Favorites menu by >> default), >> the command "select," or the little checkboxes under the Command Line >> (also under Favorites). >> >> If you did manage to position copy 2 relative to copy 1 to your >> liking, >> you could write the transformation matrices out (see "matrixget" >> command). From those you could calculate the transformation of 2 >> relative to 1 and also generate appropriate matrices that would then >> position 3, 4, ... correctly (see "matrixset" command). I admit I >> don't know how to do those calculations. Anyone? > > It's a little tricky. Basically, you want to get copy 1's matrix to > be the identity matrix while keeping copy 2 in the same relative > position. Here's one way to do it (and maybe someone can suggest > something better): > > 1) open yet another copy (copy 3) as a reference > 2) use "matrixset" to set copy 3's matrix to be the identity matrix > 3) use the "match" command with the 'active' keyword to match copy 1 > onto the reference (copy 3) while also moving copy 2 appropriately > 4) use "matrixget" to get copy 2's new transformation matrix > > I would imagine that copy 2's matrix is essentially all translation > components (i.e. the upper 3x3 is all zeroes or near-zeroes) so all > you need to do to place additional copies to multiply the translation > components by 2, 3, etc. > > --Eric > > Eric Pettersen > UCSF Computer Graphics Lab > pett(a)cgl.ucsf.edu > http://www.cgl.ucsf.edu > > >

3 2

Request
by Rajendra P. OJHA 14 Aug '07

14 Aug '07

Dear Sir, After installation on a AMD opetron machine(64 bit) it gives the following error message Pease rectify the problem and oblige. Thanks Ojha ************************** Message ********************** ./chimera-1.2422-linux_x86_64.exe UnZipSFX 5.41 of 16 April 2000, by Info-ZIP (Zip-Bugs(a)lists.wku.edu) Original path: '/home/rpo/CHIMERA' inflating: chimera_install_KUOeVj/installer inflating: chimera_install_KUOeVj/chimera.exe ./installer: /lib64/tls/libc.so.6: version `GLIBC_2.4' not found (required by ./ installer) result code from installer: 256 Installer returned unexpected return code '256' Cleaning up extract dir, 'chimera_install_KUOeVj' Installation is done; press return. ____________________________________________________________________________________ Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool. http://autos.yahoo.com/carfinder/

5 8

stereo display
by Rutledge, Robert (NIH/NCI) [V] 14 Aug '07

14 Aug '07

I am trying to get stereo working with Chimera. I use the --stereo switch when I start up the program. This results in the following error: "unable to find hardware stereo support (Togl: couldn't choose stereo pixel format)". The graphics card connected to the CRT monitor is NVIDIA 7900GS. I run Chimera under Windows XP media center edition. I have a cheap pair of shutter glasses (edimensional), which work properly when tested by the test application on the graphics card. Do I need another graphics card or glasses, or is something else the problem? Robert Rutledge

2 1

modeling non-standard amino acids
by Dan Wendt 14 Aug '07

14 Aug '07

Hello, My name is Daniel Wendt and I work for Biomarin Pharmaceuticals in Novato, Ca. I'm trying to use Chimera's modeling software to predict structural changes that are imparted on my 22 amino acid peptide by the insertion of two non-standard changes to the peptide bond. In one case, I am adding a methyl group to the backbone amide bond. In another case, I'm removing a carbonyl from the backbone amide bond. This peptide then needs to be cyclized by the formation of a intra-disulfide bond. I do have x-ray crystal structure data of my cyclized peptide bound to one of its receptors. Do you know how one goes about doing this? Do you have any references that might help? Thank you in advance! Daniel Wendt Senior Scientist BioMarin Pharmaceutical Novato, Ca 94949 (415) 506-6131 This message is intended only for the confidential use of the intended recipient(s). If you have received this communication in error, please notify the sender by reply e-mail, and delete the original message and any attachments. Any unauthorized disclosure, copying, or distribution of this message (including the attachments), or the taking of any action based on it, is strictly prohibited.

2 1

mrc maps
by Gorelik, Tatiana 13 Aug '07

13 Aug '07

Dear Chimera-team, Can I load several .mrc maps at a time and rotate them one against another? Thanks, Tatiana ************************************ Tatiana Gorelik, PhD, Institut für Physikalische Chemie Johannes Gutenberg-Universität Mainz Welderweg 11 55099 Mainz Germany Tel.: 0049 6131 39 22347 Fax: 0049 6131 39 23768 e-mail:gorelik@uni-mainz.de ************************************

5 6

macintosh/stereographics/boot camp
by Dougherty, Matthew T. 11 Aug '07

11 Aug '07

There are some difficulties deep in the apple graphics driver implementation that prevent X11 and openInventor and openGL stereographics. I can report that mac-bootcamp-windows running with a quadro fx 4500 (card supplied by apple, other cards have the wrong firmware); does correctly do stereographics under XP windows correctly with no noted problems. ========================================================================= Matthew Dougherty *** 713-433-3849 National Center for Macromolecular Imaging ========================================================================= =========================================================================

1 0

chimera on AMD workstation
by Vinay Kumar 10 Aug '07

10 Aug '07

Hello all, recently we bought a AMD workstation. I tried to install chimera_linux x86_64 on it. But it did not install. went through installation instructions. still did not work. i would like you to give me some suggestions and some variations that i could try to install chimera. Thank you Elaine, for your post on spheres. shall inform when my adventures have a result. regards, Vinay

2 2

Teaching with Chimera
by Fabian Glaser 09 Aug '07

09 Aug '07

Dear Chimera team, I'd like to use both chimera and chimera tutorials for a new "Structural Bioinformatics practical course" I am preparing here at the Technion in Israel. I will of course acknowledge appropriately. Is there any legal limitation for using chimera for this purpose? Thanks for creating such a fantastic tool Fabian Glaser, PhD Bioinformatics Knowledge Unit, The Lorry I. Lokey Interdisciplinary Center for Life Sciences and Engineering Technion - Israel Institute of Technology Haifa 32000, ISRAEL E-mail: fglaser(a)tx.technion.ac.il Tel: +972-4-829-3701 Cell: +972-52-2357731

2 1

writing translation/rotation
by Thomas C. Marlovits 08 Aug '07

08 Aug '07

Hi, am looking for an analysis tool in Chimera that would write out - let's say a matrix for translation/rotation of a pdb-file in respect to another one. Usage: would like to align chain A and chain B present in a pdb-file and want to know which translation/rotation matrix has to be applied in order to convert the non-aligned pdb-coordinates of chain B to the 'new" aligned pdb-coordinates. Thanx for your help, -Thomas ------------------------------------------------------------------------ ------- Thomas C. Marlovits, PhD, M.A.S. IMP-IMBA Research Center - Research Institute of Molecular Pathology (IMP) - Institute of Molecular Biotechnology, Austrian Academy of Sciences (IMBA) Dr. Bohr-Gasse 3 Room IMBA/6.02 A-1030 Vienna Austria, Europe fone: (++43-1) 79044-4630 fax: (++43-1) 79044-4401 email: marlovits(a)imp.univie.ac.at

3 2