- Chimera-users - RBVI Mailing Lists

issues with visualization of saxs models in chimera
by Anabel Pacios Michelena 20 Oct '20

20 Oct '20

Dear Chimera team, I am a user from your software and I would like to have a superimposition of some crystallographic structures in a recent saxs pdb model I obtained. However, I cannot visualize the saxs pdb file with Chimera. Would you have any tips or inputs how can I do this? Thank you very much in advance for all your help, Kind regards, Anabel

3 2

Writing residues coordinates and COMs
by Yasser Almeida 20 Oct '20

20 Oct '20

Hello, I am writing a python script to iterate through all the residues of my model and write the residue coordinates and its correspondent center of mass. I tried with 'runCommand' with the command 'write' but it only accepts a model to be written, not a specific residue. Any thoughts? Thanks in advance. Yasser

2 2

Query about energy minimisation
by Izzati Mokthar 19 Oct '20

19 Oct '20

Hi, I am Izzati. I have a few queries on UCSF Chimera. I need your guide to use the tools. I have two questions. Below are the questions: 1.I would like to do energy minimisation for protein structure with PDB ID: 2J9F. I click Structure editing > Minimize Structure. To be honest, I don't know how to set the settings. I used the default setting and a warning pops up as the attached picture. Do you have any suggestion of reference that I can refer to, to do the energy minimisation? [image: 5.png] 2. I need to also do molecular dynamics for my research. May I know whether I can use chimera to run molecular dynamics as well. If yes, where can I refer to the tutorials? Thank you in advance for your response. Regards, Izzati.

2 4

atom ID
by Francesco Pietra 18 Oct '20

18 Oct '20

Dear all Which is the quickest way to identify the atom ID? As visualized in the context of a multimer, where three identical subunits, distinct by chain name, bind the same peptide, also distinct by chain name. Atom IDs are needed to build a QM-MM simulation. thanks francesco pietra

2 2

PyChimera addCharge
by Matas Tiskus 16 Oct '20

16 Oct '20

Hello, I was looking for ways to add charges to protein structures in a python script and write a .mol2 file. I believe it is possible to do with importing pychimera into the script, but i can't seem to make it work. How would the code for this purpose look like? Matas

2 3

Re: [Chimera-users] [chimera-dev] Building a dimeric protein model
by Elaine Meng 15 Oct '20

15 Oct '20

On Oct 15, 2020, at 1:41 PM, Moradkhan, Tiglath A <tmoradkhan(a)csus.edu> wrote: > Hi > I've built a monomeric model using Chimera's MODELLER interface. I was wondering whether it's possible to use this model in Chimera to create a dimer. The dimer of the protein that I'm studying is composed of two antiparallel symmetric monomers. > Thank you > Tiglath > Hi Tiglath, Sure, but you would need to know the proper positioning of the two monomers in the dimer. There is nothing in Chimera to figure that out automatically. If there is a known dimer structure of a related protein and you think your modeled protein forms a similar dimer, you can simply (1) save your new monomer model as a PDB file (2) start a new Chimera, open that new PDB file two times so that you have two copies open (3) open the known dimer structure of the related protein, let's say it has chains A and B (4) superimpose one copy of your monomer model onto chain A of the known dimer structure, and superimpose the other copy of your monomer model onto chain B of the known dimer structure. Different methods of superimposing structures are discussed in the link below. Probably the easiest is to use the Matchmaker tool. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/superposition.html> (4) close the known dimer structure, and what you have left is the approximate dimer with two copies of your model, which can be saved as a session, or combined into a single model (see "combine" command) and then saved as a PDB file. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/combine.html> Alternatively if you have a dimeric template structure you can use Modeller to make a dimeric comparative model directly, but to do that you would have to use the Modeller interface in our newer program ChimeraX. The one in Chimera only allows modeling monomers. Modeller interface in ChimeraX: <http://rbvi.ucsf.edu/chimerax/docs/user/tools/modeller.html> This chimera-dev e-mail address is mostly for programming questions. For general user questions like this (for future reference) a better address to use is chimera-users(a)cgl.ucsf.edu CC'd here, and there is also a similar address for ChimeraX: chimerax-users(a)cgl.ucsf.edu I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

kill graphics windows after crash
by Dieter Blaas 15 Oct '20

15 Oct '20

Hi, please forgive me when this question is not directly related to Chimera: Sometimes Chimera becomes unresponsive because of a slow network connection. When I then try exiting it or killing it with <ctrl> c from the terminal I used to start it or killing the chimera-related process as shown with ps -ealf|grep UCSF or grep chimera the chimera windows remain and I cannot remove them. Any way of doing so? Thanks for hints, best, Dieter ----------------------------------------------------------------------- Dieter Blaas, Max Perutz Labortories Medical University of Vienna, Inst. Med. Biochem., Vienna Biocenter (VBC), Dr. Bohr Gasse 9/3, A-1030 Vienna, Austria, Tel: 0043 1 4277 61630, Mobile: 0043 699 1942 1659 e-mail: dieter.blaas(a)meduniwien.ac.at ------------------------------------------------------------------------

4 9

how to get specific view
by Shuo 15 Oct '20

15 Oct '20

Dear sir or madam, I wonder how to get specific view parameter in Chimera, just like command get_view in Pymol. So that next time I can easily adjust the view in Chimera. Best Shuo

2 1

Modelling missing residues in a protein
by Edmund Marinelli 14 Oct '20

14 Oct '20

Hello: I see that Chimera uses Modeller for modeling missing residues . Does Chimera have access to any other web based services that would perform similar function? Thanks, Edmund R Marinelli, PhD

4 4

MOLE 2.5 plugin
by Reza Khayat 13 Oct '20

13 Oct '20

Hi, I'm receiving the following error when launching the MOLE 2.5 plugin from Chimera. The plugin was installed as suggested by the developers: Favorites -> Preferences -> Add -> Select directory The plugin's icon appears in my tool bar. However, launching it generates the following error in the Reply Log. Traceback (most recent call last): File "C:\Program Files\Chimera 1.13.1rc\share\chimera\toolbar.py", line 26, in _guard func() File "C:\Mole2_ui\MOLE2_5\MainWindow.py", line 954, in <lambda> icon, lambda d=chimera.dialogs.display, n=MainWindow.name: d(n), 'MOLE 2.5', None) File "C:\Program Files\Chimera 1.13.1rc\share\chimera\dialogs.py", line 76, in display dialog = find(name, create=1) File "C:\Program Files\Chimera 1.13.1rc\share\chimera\dialogs.py", line 61, in find return d() File "C:\Mole2_ui\MOLE2_5\MainWindow.py", line 353, in __init__ with open(CONFIGFILE, 'w') as f: IOError: [Errno 13] Permission denied: '.MOLE_PluginSettings.txt' Error in toolbar callback: IOError: [Errno 13] Permission denied: '.MOLE_PluginSettings.txt' File "C:\Mole2_ui\MOLE2_5\MainWindow.py", line 353, in __init__ with open(CONFIGFILE, 'w') as f: See reply log for Python traceback.? Any help is appreciated. Best wishes, Reza Khayat, PhD Associate Professor City College of New York Department of Chemistry and Biochemistry New York, NY 10031

2 2