- Chimera-users - RBVI Mailing Lists

vop subtract removing too much of my map
by Ahmad Khalifa 29 Sep '20

29 Sep '20

I'm trying to subtract two overlapping molmaps: map1-map2, but the subtraction ends up removing too much of map1 where map2 doesn't overlap with map1! how can I get precise subtraction?

3 7

clustering models of a single pdb
by Subhrangshu Das 29 Sep '20

29 Sep '20

Dear sir, I have 100 pdb files. named as output.1.pdb to output.100.pdb what i do manually for clustering is as follows 1. select 100 pdbs -> open in chimera -> golto *File *-> *save PDB.. *-> *Save Multiple Models as PDB File *(renamed as all.pdb) 2. open chimera -> goto *Tools *->* MD/Ensemble Analysis *->* MD Movie* 3. in *Get Ensemble Info *dialogue box set -> *Trajectory format :* *PDB* *PDB frames contained in:* *single file* * Browse *to select File <all.pdb> *Use frames **first **through * *last* 4. on click *OK,* a dialogue box pops out, *MD Movie: PDB trajectory from all.pdb*, in which, goto *Analysis -> Cluster...*5.. on click* Cluster,* a dialogue box pops out,* Get Clustering Parameters,* in which I set *Cluster trajectory *as: *Starting frame: * *1* *step size: **1* *Ending frame:* * 100* *Cluster based on current selection, if any: * *true* *Ignore solvent and non metal ions: true* *Ignore hydrogens: * *true* *Ignore metal ions: * *alkali* 6. on click *OK, *after some RMSD calculation, i get the *Clustering* result, which I save to a text file <cluster> Now, as I need to do this for multiple times, I want to automate these steps by a python script. Can you please help with a scipt or some command help for the aforesaid tasks. Any help will be helpful in these regard. -- Thanks & Regards, Subhrangshu Das Junior Research Fellow, CSIR-IICB Department of Structural Biology & Bioinformatics Contact - IICB TRUE Campus, CN-6, Salt lake, Sector V, Kolkata-700091 *+919804938813*

3 3

tile from command line
by Dieter Blaas 28 Sep '20

28 Sep '20

Hi, I am trying to use the command line command TILE as given here: Usage <https://www.cgl.ucsf.edu/chimera/current/docs/UsersGuide/midas/usageconvent…>: *tile* /models/ [ columns /N/ ] [ spacingFactor /f/ ] [ independentRotation true|false ] [ viewAll true|false ] [ label true|false ] I tried (following the syntax of e.g. "vol all level 0.02": "tile vol all columns 3" or "tile all columns 3" or "tile models all columns 3" or "tile #0, #1, #2, #4, #5, #6 columns 3" but none works can you please give me an example! Thanks, best, Dieter ------------------------------------------------------------------------ Dieter Blaas, Max Perutz Laboratories Medical University of Vienna, Inst. Med. Biochem., Vienna Biocenter (VBC), Dr. Bohr Gasse 9/3, A-1030 Vienna, Austria, Tel: 0043 1 4277 61630, Mobile: 0043 699 1942 1659 e-mail: dieter.blaas(a)meduniwien.ac.at ------------------------------------------------------------------------

2 1

Is RTX support planned?
by Gokhan Tolun 25 Sep '20

25 Sep '20

Hi Tom, Are there any plans to implement RTX (real-time ray tracing) support to ChimeraX (and even better, allow the use of physically modelled materials and textures)? Thanks, Gökhan Gökhan Tolun<https://scholars.uow.edu.au/display/gokhan_tolun>, M.S., Ph.D. Senior Lecturer School of Chemistry and Molecular Bioscience<https://www.uow.edu.au/science-medicine-health/schools-entities/school-of-c…> | Faculty of Science, Medicine and Health (SMAH)<https://smah.uow.edu.au/index.html> | Room 125 / Building 18 Molecular Horizons Research Institute<https://www.uow.edu.au/molecular-horizons/index.html> Illawarra Health and Medical Research Institute<https://www.ihmri.org.au/researchers/gokhan-tolun/> University of Wollongong NSW 2522 Australia T +61 2 4221 3365 uow.edu.au<http://uow.edu.au/> | Facebook<https://www.facebook.com/UOW> | Twitter<https://twitter.com/uow> | Instagram<https://www.instagram.com/uow/> | LinkedIn<http://www.linkedin.com/edu/school?id=10255> NOTICE: This email is intended for the addressee name and may contain confidential information. If you are not the intended recipient, please delete it and notify the sender. Please consider the environment before printing this email.

2 1

X-PLOR format, finding a maximum
by Gustaf Olsson 25 Sep '20

25 Sep '20

Hello Chimera users This might be a somewhat “of-topic” question though I thought that this would be a good place to start. When loading density maps (particularly the X-PLOR format density maps) into Chimera the 'volume viewer’ window provides a maximum number of gridpoints for the map. My question has to do with the format of the XPLOR files. The documentation regarding this format is rather sparse and my I have not been keeping my knowledge regarding matrices up to date. Is there a way to identify this maximum value by just inspecting the content of these files? I have a lot of these files and as I en up presenting results only for ligands with grids visible above a specific cut-off, I though it would save me a lot of time and headache if I could just load the density maps with maximum densities above the cutoff. My though was to just parse the files through AWK or similar to find files with a x > a and then only load these. Sadly, I keep looking at the content of these files and I am not able to make much sense of what I am looking at. Any solutions, suggestions or suggested reading to be able to find a way to create a solution would be greatly appreciated. Best regards // Gustaf

2 1

Error reading multiple models
by Francesco Pietra 25 Sep '20

25 Sep '20

In my hands CHIMERA can't read multiple models as in .trj.xyz provided by ORCA software in QM calculations Error reading 5-sulf-min_trj.xyz: Coordinate line of XYZ file '/home/francesco/work_AGAs/VITTORIO/5-sulf-min_PBE0_OPT_FREQ_SMD/ 5-sulf-min_trj.xyz' is not element,x,y,z: '36' That is no problem for Jmol, however I would be interested in opening the models with also CHIMERA (which can open these models as a single-model-file. thanks for advice francesco pietra

2 1

Open .mrcs stack in chimera
by Ahmad Khalifa 24 Sep '20

24 Sep '20

Can I open a .mrcs stack in chimera? What file type should I pass to Chimera in order to do that?

2 1

Re: [Chimera-users] Stereo Red Cyan
by Greg Couch 24 Sep '20

24 Sep '20

Yes, the red and gray is normal, but you're seeing the combined channels. You need the glasses to separate the channels. Try viewing the image with the glasses that come with a 3D comic book. -- Greg On 9/21/2020 11:43 PM, Michael Elbaum wrote: > Red-cyan, sorry. No, I didn't look for stereo at all, just to > reproduce the condition posted that one channel appears in red and the > other in gray. Is that normal? > Michael > ------------------------------------------------------------------------ > *From:* Greg Couch <gregc(a)cgl.ucsf.edu> > *Sent:* Tuesday, September 22, 2020 4:57:50 AM > *To:* Michael Elbaum <michael.elbaum(a)weizmann.ac.il> > *Subject:* Re: [Chimera-users] Stereo Red Cyan > > Are you wearing red-cyan glasses to see the stereo? It doesn't work > without them. > > > -- Greg > > > On 9/21/2020 1:08 PM, Michael Elbaum wrote: >> >> I'm confirming the problem with a different dataset (optical >> deconvolution in tif format). Red-green shows red and gray, >> green-magenta shows green and gray. This is with version 1.14 on linux. >> >> regards, >> Michael >> >> >> >> ------------------------------------------------------------------------ >> *From:* Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf >> of Angus McDonald <amcdonald(a)boisestate.edu> >> *Sent:* Monday, September 21, 2020 9:46:24 PM >> *To:* chimera-users(a)cgl.ucsf.edu BB >> *Subject:* [Chimera-users] Stereo Red Cyan >> I am looking at some cryo em data. When I try to view a a 3D stack of >> em dat with the Red-Cyan stereo setting I seem to only get Red and >> grayscale. The data is in 32-bit floating point and is in MRC2014 >> header format. I cannot figure out what I am doing wrong. Is anything >> obvious? >> >> Thanks for your time. >> >> >> >> -- >> Angus McDonald >> amcdonald(a)boisestate.edu <mailto:amcdonald@boisestate.edu> >> >> _______________________________________________ >> Chimera-users mailing list:Chimera-users@cgl.ucsf.edu >> Manage subscription:https://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users

4 4

electrostatic interactions
by Ruchika 23 Sep '20

23 Sep '20

Hi Elaine I do see "Find out clashes and contacts" feature in Chimera. I am wondering if there is any feature which can check on electrostatic interactions as well. Please let me know. Thanks !! Regards Ruchika

2 5

Fitting structure in rescaled map
by Ahmad Khalifa 23 Sep '20

23 Sep '20

Hello, How to fit an atomic model after downscaling my map (map shrinks)? Are atomic models built to scale?! Regards.

2 3