- Chimera-users - RBVI Mailing Lists

(no subject)
by Yasser Almeida 22 Oct '20

22 Oct '20

Dear Anabel, As others pointed out, you can just represent the beads as balls, points, or wire, and remove all the pseudbonds. On the other hand, how did you obtained your pdb? If you used GNOM in the ATSAS package (GUI version), it writes pdbs with a bigger bead size, which Chimera fails to represent by default. But if you use GNOM in the command line, it writes pdbs with a smaller bead size, which are more compact, smoother, and better for representation in Chimera, and others. Best, Yasser Dear Chimera team, > I am a user from your software and I would like to have a > superimposition of some crystallographic structures in a recent saxs > pdb model I obtained. However, I cannot visualize the saxs pdb file > with Chimera. Would you have any tips or inputs how can I do this? > Thank you very much in advance for all your help, > Kind regards, > Anabel

1 0

Broken links, system requirements
by Calvin Dodge 22 Oct '20

22 Oct '20

Hello, I have been trying to find out what the hardware requirements are for Chimera. For example, how can it be run in a cluster environment with CUDA cards, but no Nvidia graphics cards? My search for information has been hampered by an apparent failure or reorganization of the main site -https://www.cgl.ucsf.edu/chimera/ Every internal link from that page (like to Downloads) is broken. Will the broken links be fixed? Is another page the preferred one for Chimera? Do I need the OSMesa version to run without graphics cards? Thanks, Calvin Dodge Calvin Dodge Systems Analyst Office: 832-271-7148 Email : cdodge(a)x-iss.com<mailto:ellorente@x-iss.com> http://www.x-iss.com<https://mail.x-iss.com/owa/redir.aspx?C=32dc65a1e7df4e4289ad76e23a15fcf0&UR…> [cid:image001.png@01D5DB72.2E9C2F40]<http://www.x-iss.com/> Smart Management and Analytics for Clusters

4 4

Re: [Chimera-users] Broken links, system requirements
by Greg Couch 21 Oct '20

21 Oct '20

Your university might want the regular version of Chimera to remotely display data. In that case, you should set up VirtualGL as well. And a RDP solution, like x2go. It doesn't perform as well as Chimera running locally on the desktop, but it might be sufficient. -- Greg On 10/21/2020 11:21 AM, Calvin Dodge wrote: > > Greg, > > Thanks for your reply _/I/_ don’t want to run Chimera in a cluster > environment, but the university I’m doing the install for does. I’ll > install the headless version. > > Sincerely, > > Calvin Dodge > > */Calvin Dodge/*/ > Systems Analyst/ > > /Office: 832-271-7148/ > > / > /Email : cdodge(a)x-iss.com <mailto:ellorente@x-iss.com> > > http://www.x-iss.com > <https://mail.x-iss.com/owa/redir.aspx?C=32dc65a1e7df4e4289ad76e23a15fcf0&UR…> > > <http://www.x-iss.com/> > > Smart Management and Analytics for Clusters > > *From: *Greg Couch <mailto:gregc@cgl.ucsf.edu> > *Sent: *Wednesday, October 21, 2020 12:24 PM > *To: *Calvin Dodge <mailto:cdodge@x-iss.com>; > chimera-users(a)cgl.ucsf.edu <mailto:chimera-users@cgl.ucsf.edu> > *Subject: *Re: [Chimera-users] Broken links, system requirements > > (We're working on the web site issues.) > > So the real question is why do you want to run Chimera in a cluster > environment? > > Chimera is not designed to run in a cluster environment, it is > designed to run a user's desktop computer using 3D graphics. Chimera > does not use CUDA. That said, there is a headless version for Linux > that uses a software implementation of OpenGL to create images that > you could use in a cluster, so no graphics card is needed. > > ChimeraX, our successor to Chimera, can take advantage of CUDA in some > circumstances, but it is not required. ChimeraX also only works > headless on Linux, with a software implementation of OpenGL. The > headless operation is included in every Linux version. So no graphics > card is needed there either. We are investigating ways to take > advantage of the graphic card's performance when running headless, but > we're not there yet. > > HTH, > > Greg > > On 10/21/2020 9:24 AM, Calvin Dodge wrote: > > Hello, > > I have been trying to find out what the hardware requirements are > for Chimera. For example, how can it be run in a cluster > environment with CUDA cards, but no Nvidia graphics cards? > > My search for information has been hampered by an apparent failure > or reorganization of the main site -https://www.cgl.ucsf.edu/chimera/ > > Every internal link from that page (like to Downloads) is broken. > > Will the broken links be fixed? Is another page the preferred one > for Chimera? Do I need the OSMesa version to run without graphics > cards? > > Thanks, > > Calvin Dodge > > */Calvin Dodge/*/ > Systems Analyst/ > > /Office: 832-271-7148/ > > / > /Email : cdodge(a)x-iss.com <mailto:ellorente@x-iss.com> > > http://www.x-iss.com > <https://mail.x-iss.com/owa/redir.aspx?C=32dc65a1e7df4e4289ad76e23a15fcf0&UR…> > > <http://www.x-iss.com/> > > Smart Management and Analytics for Clusters > > > > _______________________________________________ > > Chimera-users mailing list:Chimera-users@cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > > Manage subscription:https://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users >

1 0

issues with visualization of saxs models in chimera
by Anabel Pacios Michelena 20 Oct '20

20 Oct '20

Dear Chimera team, I am a user from your software and I would like to have a superimposition of some crystallographic structures in a recent saxs pdb model I obtained. However, I cannot visualize the saxs pdb file with Chimera. Would you have any tips or inputs how can I do this? Thank you very much in advance for all your help, Kind regards, Anabel

3 2

Writing residues coordinates and COMs
by Yasser Almeida 20 Oct '20

20 Oct '20

Hello, I am writing a python script to iterate through all the residues of my model and write the residue coordinates and its correspondent center of mass. I tried with 'runCommand' with the command 'write' but it only accepts a model to be written, not a specific residue. Any thoughts? Thanks in advance. Yasser

2 2

Query about energy minimisation
by Izzati Mokthar 19 Oct '20

19 Oct '20

Hi, I am Izzati. I have a few queries on UCSF Chimera. I need your guide to use the tools. I have two questions. Below are the questions: 1.I would like to do energy minimisation for protein structure with PDB ID: 2J9F. I click Structure editing > Minimize Structure. To be honest, I don't know how to set the settings. I used the default setting and a warning pops up as the attached picture. Do you have any suggestion of reference that I can refer to, to do the energy minimisation? [image: 5.png] 2. I need to also do molecular dynamics for my research. May I know whether I can use chimera to run molecular dynamics as well. If yes, where can I refer to the tutorials? Thank you in advance for your response. Regards, Izzati.

2 4

atom ID
by Francesco Pietra 18 Oct '20

18 Oct '20

Dear all Which is the quickest way to identify the atom ID? As visualized in the context of a multimer, where three identical subunits, distinct by chain name, bind the same peptide, also distinct by chain name. Atom IDs are needed to build a QM-MM simulation. thanks francesco pietra

2 2

PyChimera addCharge
by Matas Tiskus 16 Oct '20

16 Oct '20

Hello, I was looking for ways to add charges to protein structures in a python script and write a .mol2 file. I believe it is possible to do with importing pychimera into the script, but i can't seem to make it work. How would the code for this purpose look like? Matas

2 3

Re: [Chimera-users] [chimera-dev] Building a dimeric protein model
by Elaine Meng 15 Oct '20

15 Oct '20

On Oct 15, 2020, at 1:41 PM, Moradkhan, Tiglath A <tmoradkhan(a)csus.edu> wrote: > Hi > I've built a monomeric model using Chimera's MODELLER interface. I was wondering whether it's possible to use this model in Chimera to create a dimer. The dimer of the protein that I'm studying is composed of two antiparallel symmetric monomers. > Thank you > Tiglath > Hi Tiglath, Sure, but you would need to know the proper positioning of the two monomers in the dimer. There is nothing in Chimera to figure that out automatically. If there is a known dimer structure of a related protein and you think your modeled protein forms a similar dimer, you can simply (1) save your new monomer model as a PDB file (2) start a new Chimera, open that new PDB file two times so that you have two copies open (3) open the known dimer structure of the related protein, let's say it has chains A and B (4) superimpose one copy of your monomer model onto chain A of the known dimer structure, and superimpose the other copy of your monomer model onto chain B of the known dimer structure. Different methods of superimposing structures are discussed in the link below. Probably the easiest is to use the Matchmaker tool. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/superposition.html> (4) close the known dimer structure, and what you have left is the approximate dimer with two copies of your model, which can be saved as a session, or combined into a single model (see "combine" command) and then saved as a PDB file. <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/midas/combine.html> Alternatively if you have a dimeric template structure you can use Modeller to make a dimeric comparative model directly, but to do that you would have to use the Modeller interface in our newer program ChimeraX. The one in Chimera only allows modeling monomers. Modeller interface in ChimeraX: <http://rbvi.ucsf.edu/chimerax/docs/user/tools/modeller.html> This chimera-dev e-mail address is mostly for programming questions. For general user questions like this (for future reference) a better address to use is chimera-users(a)cgl.ucsf.edu CC'd here, and there is also a similar address for ChimeraX: chimerax-users(a)cgl.ucsf.edu I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

kill graphics windows after crash
by Dieter Blaas 15 Oct '20

15 Oct '20

Hi, please forgive me when this question is not directly related to Chimera: Sometimes Chimera becomes unresponsive because of a slow network connection. When I then try exiting it or killing it with <ctrl> c from the terminal I used to start it or killing the chimera-related process as shown with ps -ealf|grep UCSF or grep chimera the chimera windows remain and I cannot remove them. Any way of doing so? Thanks for hints, best, Dieter ----------------------------------------------------------------------- Dieter Blaas, Max Perutz Labortories Medical University of Vienna, Inst. Med. Biochem., Vienna Biocenter (VBC), Dr. Bohr Gasse 9/3, A-1030 Vienna, Austria, Tel: 0043 1 4277 61630, Mobile: 0043 699 1942 1659 e-mail: dieter.blaas(a)meduniwien.ac.at ------------------------------------------------------------------------

4 9