August 2019 - ChimeraX-users - RBVI Mailing Lists

Re: [chimerax-users] [Chimera-users] color by zone in chimeraX
by Elaine Meng 20 Nov '20

20 Nov '20

Hi Pranav, I’m Cc'ing the chimerax-users(a)cgl.ucsf.edu list (recommended for ChimeraX questions). I believe the problem is that when coloring the chains you are using “target c” which means to color only cartoons, whereas coloring by zone uses the atom colors. Since you only colored the cartoons, the atoms probably still had heteroatom color-coding. If you use “target ac” instead (even if the atoms aren’t shown), then as long as the color zone distance is big enough, I think you will get the color zones you expect. <http://rbvi.ucsf.edu/chimerax/docs/user/commands/color.html#simple> <http://rbvi.ucsf.edu/chimerax/docs/user/commands/color.html#zone> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Aug 20, 2019, at 10:54 AM, Pranav Shah <p.shah.lab(a)gmail.com> wrote: > > Hi Elaine and Co., > > I am trying to color a virus map with the relevant pdb file, the > series of commands I am running are as follows, > open virus.mrc > open virus.pdb > color /A plum target c > color /B lightgreen target c > color /C dodger blue target c > color zone #1 near #2 dist 3 > However, the resultant surface is rendered in splotches of red and > blue, which leads me to think the it is coloring the surface using > atom type. Could you tell me how I can get Chimera X to color the > surface using the colors of the chains only? FYI, color by zone works > flawlessly in chimera. > > Cheers, > Pranav

2 6

semitransparent volumes with ambient occlusion
by Sindelar, Charles 03 Sep '19

03 Sep '19

Dear Elaine, Eric, Tom, and team, I am happy to see ChimeraX is continuing to move forward! Here is a little request. For the figures that I am now making for publications, I have a special interest in showing semitransparent molecular maps together with the corresponding models, with ambient occlusion lighting on. I think ambient occlusion makes this kind of figure much easier to interpret and more beautiful. What I have noticed is ambient occlusion seems to get automatically turned off as soon as a map becomes less than 100% opaque. I always assumed this was due to some kind of rendering difficulty. But then, I noticed that sometimes I can “trick” an old version of ChimeraX to do exactly what I want! Below is an example. Basically, in ChimeraX 0.6 I can set up everything just the way I want with an opaque map, then turn down the map opacity and get a nice, pretty figure just the way I like it. But then, as soon as I show/hide anything in the Model Panel, the ambient feature gets turned off! I noticed that in the most recent daily build, this “trick” no longer works and I can’t seem to ever get the pretty combination of transparent maps and ambient occlusion lighting that I like. I sure would like to have this option! I guess there must be some reason it is disabled? Best, Chuck Sindelar Opaque map + PDB (ChimX v0.6) (pretty but the PDB is obscured) [cid:image001.png@01D55FF9.D8266CF0] After adjust to 80% map opacity (ChimX v0.6) (pretty!) [cid:image002.png@01D55FF9.D8266CF0] After unshow/show PDB model (ChimX v0.6) (argh!) [cid:image003.png@01D55FF9.D8266CF0]

2 3

silhouette of transparent density
by YAO HE 30 Aug '19

30 Aug '19

Hi, I am using ChimeraX now to show the overlay between atomic model and transparent EM densities. However, when I enable the silhouette feature, only the transparent EM densities are affected. I am wondering if it is possible to also silhouette the atomic model inside. Just like "setattr M silhouette true #3" in Chimera. Best, Yao

5 10

silhouette of transparent density
by heyao 30 Aug '19

30 Aug '19

Hi, I am using ChimeraX now to show the overlay between atomic model and transparent EM densities. However, when I enable the silhouette feature, only the transparent EM densities are affected. I am wondering if it is possible to also silhouette the atomic model inside. Just like "setattr M silhouette true #3" in Chimera. Best, Yao

1 0

Chimera X and the Oculus Quest
by Thomas Gluick 28 Aug '19

28 Aug '19

HI First please excuse my computer language ignorance. My question is: Is the Oculus Quest compatible with Chimera X; if it is, is software available to link the program to the Quest. I am aware already that the Rift can be connected and also certain phones. Thank you for you time. Best Tom Dr. Thomas Gluick Assistant Professor of Chemistry School of Science and Technology 770-842-5532

2 1

Question about Calphas and line between them
by Yazan Abbas 21 Aug '19

21 Aug '19

Hi, While looking through the user guide, I came across an option to draw a line between consecutive Calphas that are displayed. I made a mental note to use that option in my figure, but I failed to bookmark it or write down what the command was. I've been through the user guide several times again, but can't seem to find it. Would appreciate it if someone could jog my memory. Thanks, Yazan

2 1

discontinuous helices in tube mode
by Yazan Abbas 19 Aug '19

19 Aug '19

Hi, Is there a parameter that can be changed to control how "cartoon style modeH tube" draws a continuous helix? In my model, most of my helices are broken up into 2-4 discontinuous helices (especially the long, curved ones). In pymol (cylinders mode) and chimera (pipes and planks depiction), the same helices are drawn as a single, continuous helix, suggesting that my model is ok. I tried adding a HELIX definition in the pdb file, and also tried forcing chimeraX to draw a helix using the setattr command, but neither strategy has helped. I also tried playing with the dssp energyCutoff with no success. Thanks, Yazan

2 3

Question about "color sample" command
by Sean Connell 19 Aug '19

19 Aug '19

Hello I have a question about the "color sample" command (Chimerax-daily version 0.91 2019-08-14) and its use in coloring a volume based on the values of a second volume (i.e. local resolution maps from relion) The command works great when I load the volumes in to chimerx but after I load them I want to transform them using matchmaker and the bring option so that all the volumes I want to view are in a common frame of reference. After I transform the volumes though if i re-issue the "color sample" command it seems to color the first volume according to the values in the un-transformed second volume I am guessing? Is this correct and expected or am I just doing something wrong? if this is what is happening is there a way to force color sample to read the transformed values or to re-sample the transformed maps so they are correctly read? Also the output of the color sample command reports the min,max and mean values, just to confirm this corresponds to the values of all the voxels displayed at the current threshold level right? Finally is there a way to show a key for the coloring in chimerax? Many thanks for any advice you can provide. Sean

3 3

Fly function in ChimeraX - 2
by Gabor PAPAI 16 Aug '19

16 Aug '19

Dear developers, I’ve seen that two years ago the fly command from Chimera was not implemented in ChimeraX. Is it implemented now? Or does ChimeraX have a similar function? I tried the view command inside the perframe function, unfortunately this didn’t result in a smooth transition between two named views. The only option I have now is to translate, zoom and rotate the scene with the individual commands, however this is quite tedious to set. Best regards, Gabor --- Gabor Papai IGBMC Integrated Structural Biology 1, rue Laurent Fries, Bp 10142 67404 Illkirch, France Tel: +33-3-69485288

2 1

RESMAP output superposition.
by chimerax-announce-owner＠cgl.ucsf.edu 15 Aug '19

15 Aug '19

From: Shahid Khan <outlook_CD0472DE47DC92D6(a)outlook.com <mailto:outlook_CD0472DE47DC92D6@outlook.com>> Subject: RESMAP output superposition. Date: August 14, 2019 at 7:33:59 PM PDT Hello The python script for mapping the RESMAP local resolution output does not work in ChimeraX. Has anybody modified it so that it does? Or written a new script with the same purpose for ChimeraX. Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

2 1

ChimeraX-users August 2019