September 2019 - ChimeraX-users - RBVI Mailing Lists

Re: [chimerax-users] [Chimera-users] color by zone in chimeraX
by Elaine Meng 20 Nov '20

20 Nov '20

Hi Pranav, I’m Cc'ing the chimerax-users(a)cgl.ucsf.edu list (recommended for ChimeraX questions). I believe the problem is that when coloring the chains you are using “target c” which means to color only cartoons, whereas coloring by zone uses the atom colors. Since you only colored the cartoons, the atoms probably still had heteroatom color-coding. If you use “target ac” instead (even if the atoms aren’t shown), then as long as the color zone distance is big enough, I think you will get the color zones you expect. <http://rbvi.ucsf.edu/chimerax/docs/user/commands/color.html#simple> <http://rbvi.ucsf.edu/chimerax/docs/user/commands/color.html#zone> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Aug 20, 2019, at 10:54 AM, Pranav Shah <p.shah.lab(a)gmail.com> wrote: > > Hi Elaine and Co., > > I am trying to color a virus map with the relevant pdb file, the > series of commands I am running are as follows, > open virus.mrc > open virus.pdb > color /A plum target c > color /B lightgreen target c > color /C dodger blue target c > color zone #1 near #2 dist 3 > However, the resultant surface is rendered in splotches of red and > blue, which leads me to think the it is coloring the surface using > atom type. Could you tell me how I can get Chimera X to color the > surface using the colors of the chains only? FYI, color by zone works > flawlessly in chimera. > > Cheers, > Pranav

2 6

GUI not properly visualized
by Pascal Albanese UU 25 Sep '19

25 Sep '19

Hi Chimera staff, i just changed PC ad now i have huge visualization problems of the GUI, when opening is fine but when i open any pdb file or session all buttons and commands in the window disappear. Command line actually works but all i see is this: [image: image.png] do you have any explanation? i tried different releases (0.9 official, daily builds) I'm using W10 enterprise, 64bit, intel i9 9900, UHD graphics 630. Thanks for the support, best regards, -- Pascal Albanese Ph.D PostDoc Biomolecular Mass Spectrometry and Proteomics Utrecht Institute for Pharmaceutical Sciences Utrecht University Padualaan 8 3584 CH, Utrecht The Netherlands Telephone: +31 30 253 6805 https://www.hecklab.com/

2 4

ray tracing
by Ahel,Juraj 24 Sep '19

24 Sep '19

Dear all, pardon me if this has already been answered elsewhere, but I failed to find any information about this in the publication, webpage, or the mailing list archive. Is there a way to generate images of ray-traced maps in ChimeraX? I was often using it in Chimera but I can't find the option to do it in ChimeraX. Was it not included as a feature? Many thanks! Juraj

2 1

Manually imposed symmetry
by Shahid Khan 16 Sep '19

16 Sep '19

Hello I am having difficulty in manually imposing symmetry on a map (*.mrc file) and then extracting the unit cell for the subsequent fitting of PDB structures with fitmap. (1) When I use the command "Volume symmetry #1, C33 axis z centerIndex 107.5" I get the error message "No placements for #1" that I do not understand. (2) I cannot figure out from the help documentation on how to save and display one of the created segments. Any ideas? Thanks Shahid -- Dr Shahid Khan Senior Scientist Molecular Biology Consortium Lawrence Berkeley National Laboratory

3 4

render buriedArea surface?
by Alexis Rohou 09 Sep '19

09 Sep '19

Hi all, I would like to depict the buried surface area between two chains. I have used "measure buriedarea" to measure it, and I can use "surface" to display the surfaces of either set of atoms, but I'd like to depict the surface of one of the chains, highlighting the region buried by the other chain. Is there a way to do this in ChimeraX? If not, does anyone have a recommendation as to how to achieve this? Perhaps by pre-computing the surfaces in another program? Thanks in advance! Cheers, Alexis

3 6

vdw representation in chimeraX
by Elena Zehr 09 Sep '19

09 Sep '19

Hello, In chimera one can display dot van der Waals surfaces for atoms. *vdw* *atom-spec* <https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/frameatom_spec.html> What would be the equivalent command in ChimeraX? Thank you, Elena

2 2

Open days EPFL - ChimeraX VR
by Krapp Lucien Fabrice 05 Sep '19

05 Sep '19

Hello, We are creating some small VR demos in ChimeraX for the EPFL open days in a few weeks (https://www.epfl.ch/campus/events/celebration-en/portes-ouvertes/). It is an event to show to a broader audience what the university is doing. The demos consists of small proteins up to density maps of bacteriophage with a few simple animations and menus to interact with the structures. Everything is almost done, I'm currently trying to fix the last issue but I didn't find a solution in the documentation. For two of the demos we would like the user to move a selection in VR with one of the VR controller right out of the box without having to go in the VR menu and click on the "move selected" button. I was able to make it work on Linux by loading the session though the remote API with the right part selected but it doesn't seem to work on Windows. The log shows a status change when clicking on the button "move selected" in VR but not the actual command to change the mode. Do you know if there is a way to change the mode of the VR controller without having to manually go through the menu in VR ? In the mean time, I will try different saved sessions and (remote) commands to try and solve the issue. If the demos are a success we will most likely make them available online so that anybody can try and improve them. Thank you in advance for your help. best, Lucien

2 4

semitransparent volumes with ambient occlusion
by Sindelar, Charles 03 Sep '19

03 Sep '19

Dear Elaine, Eric, Tom, and team, I am happy to see ChimeraX is continuing to move forward! Here is a little request. For the figures that I am now making for publications, I have a special interest in showing semitransparent molecular maps together with the corresponding models, with ambient occlusion lighting on. I think ambient occlusion makes this kind of figure much easier to interpret and more beautiful. What I have noticed is ambient occlusion seems to get automatically turned off as soon as a map becomes less than 100% opaque. I always assumed this was due to some kind of rendering difficulty. But then, I noticed that sometimes I can “trick” an old version of ChimeraX to do exactly what I want! Below is an example. Basically, in ChimeraX 0.6 I can set up everything just the way I want with an opaque map, then turn down the map opacity and get a nice, pretty figure just the way I like it. But then, as soon as I show/hide anything in the Model Panel, the ambient feature gets turned off! I noticed that in the most recent daily build, this “trick” no longer works and I can’t seem to ever get the pretty combination of transparent maps and ambient occlusion lighting that I like. I sure would like to have this option! I guess there must be some reason it is disabled? Best, Chuck Sindelar Opaque map + PDB (ChimX v0.6) (pretty but the PDB is obscured) [cid:image001.png@01D55FF9.D8266CF0] After adjust to 80% map opacity (ChimX v0.6) (pretty!) [cid:image002.png@01D55FF9.D8266CF0] After unshow/show PDB model (ChimX v0.6) (argh!) [cid:image003.png@01D55FF9.D8266CF0]

2 3

ChimeraX-users September 2019