January 2020 - ChimeraX-users - RBVI Mailing Lists

SMILES structures
by Eric Pettersen 27 Jan '20

27 Jan '20

Hi all, SMILES strings can now be translated to 3D structures (via NIH NCI or Indiana University web services), e.g. “open smiles:c1ccccc1”. —Eric Eric Pettersen UCSF Computer Graphics Lab

1 1

dome camera mode
by James Hedberg 24 Jan '20

24 Jan '20

Hi, I see from previous threads (3/2019) that there are no plans to add the dome projection/fisheye mode for the camera control on ChimeraX: "It would take some days of work to add dome camera mode to ChimeraX. We have no funding for that and very few people will use it so I'm afraid that is not likely to be implemented.” I understand there is probably not a lot of current demand for this feature, however, in the spirit of Field of Dreams - if you build it, they will come. There is a growing interest in using planetariums/full domes for non-astro related sci-viz, yet very few tools available to do so. We’re currently using Chimera (regular) to do sci-viz in the planetarium for proteins and more. Knowing that this would be supported down the road when ChimeraX takes over (not sure when that will happen) would certainly be nice. You could make ChimeraX uniquely positioned to fill this deficit. Anyway, just a hand raised here for an informal poll of ‘who wants dome mode’. Thanks, James Dr. James Hedberg Physics Lecturer Director, CCNY Planetarium<https://ccnyplanetarium.org> City College of New York Department of Physics

2 6

ChimeraX and REST service interoperation
by Mungo Carstairs (Staff) 24 Jan '20

24 Jan '20

Hi, With your helpful hints, I have a version of Jalview interacting with ChimeraX in the same way it can already with Chimera, over the REST interface. Functionality includes loading structures, aligning, colouring, raising labels on structure on mouseover in Jalview, and exchange of residue features/attributes. I have just one interaction not working yet: highlighting residues in Jalview when a selection is made in ChimeraX. - Jalview starts listening for ChimeraX selections with (e.g.) info notify start selection jalview prefix SelectionChanged url http://localhost:49981/jalview/chimera1 - user makes a selection in ChimeraX - ChimeraX sends GET?chimerax_notification=SelectionChangedselection+changed - Jalview send 'info selection level residue' - no response / timeout; ChimeraX log reports 'broken pipe error' Exception happened during processing of request from ('127.0.0.1', 50714) Traceback (most recent call last): File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 316, in _handle_request_noblock self.process_request(request, client_address) File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 347, in process_request self.finish_request(request, client_address) File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 360, in finish_request self.RequestHandlerClass(request, client_address, self) File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 720, in __init__ self.handle() File "/Applications/ChimeraX_Daily.app/.../http/server.py", line 426, in handle self.handle_one_request() File "/Applications/ChimeraX_Daily.app/.../http/server.py", line 414, in handle_one_request method() File "/Applications/ChimeraX_Daily.app/.../site-packages/chimerax/rest_server/server.py", line 97, in do_GET self._run(args) File "/Applications/ChimeraX_Daily.app/.../site-packages/chimerax/rest_server/server.py", line 174, in _run self.wfile.write(data) File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 799, in write self._sock.sendall(b) BrokenPipeError: [Errno 32] Broken pipe NB this is all before a response has been sent to the 'SelectionChanged' message. Any idea what the problem is here please? Do I need to reply to the first message before sending another? The same mechanism does work ok with Chimera. Thanks, Mungo p.s. I noticed the 'listinfo' command (undocumented) seems to behave like 'info'. Should I continue to use 'list' or switch to 'info'? * [University of Dundee shield logo]<http://uod.ac.uk/sig-home> Mungo Carstairs Jalview Computational Scientist The Barton Group Division of Computational Biology School of Life Sciences University of Dundee, Dundee, Scotland, UK www.jalview.org<http://www.jalview.org> www.compbio.dundee.ac.uk<http://www.compbio.dundee.ac.uk> g.m.carstairs(a)dundee.ac.uk<mailto:g.m.carstairs@dundee.ac.uk> [University of Dundee Facebook]<http://uod.ac.uk/sig-fb> [University of Dundee Twitter] <http://uod.ac.uk/sig-tw> [University of Dundee LinkedIn] <http://uod.ac.uk/sig-li> [University of Dundee YouTube] <http://uod.ac.uk/sig-yt> [University of Dundee Instagram] <http://uod.ac.uk/sig-ig> [University of Dundee Snapchat] <http://uod.ac.uk/sig-sc> We're Scottish University of the Year again!<http://uod.ac.uk/sig-strapline> The Times / Sunday Times Good University Guide 2016 and 2017 The University of Dundee is a registered Scottish Charity, No: SC015096

2 3

PubChem
by Eric Pettersen 22 Jan '20

22 Jan '20

Hi all, As of tomorrow’s build, ChimeraX will be able to fetch PubChem entries, e.g. “open pubchem:2519” or “open 2519 from pubchem”. —Eric Eric Pettersen UCSF Computer Graphics Lab

1 0

Next/previous buttons for model display/activation?
by Oliver Clarke 21 Jan '20

21 Jan '20

Hi, I use the Next/Previous buttons in the lower portion of the Chimera GUI all the time for quickly cycling through maps/models (e.g. when inspecting the results of 3D classification). Would it be possible to bring these to the model panel on ChimeraX? Cheers Oli

2 1

Re: [chimerax-users] silhouettes on mesh in ChimeraX
by Tom Goddard 21 Jan '20

21 Jan '20

Hi Gabe, I agree the silhouette edges look bad on meshes. ChimeraX cannot turn off silhouette edges on just meshes. It uses the scene depth at each pixel to compute the edges and the mesh contributes to the scene depth. This is a different method than Chimera used. It has the advantage that it renders basically as fast as without silhouettes where Chimera renders about 2x slower with silhouettes. The Chimera method won't work in ChimeraX because ChimeraX uses modern OpenGL (core profile) which no longer supports drawing linewidth greater than 1. The Chimera algorithm worked by drawing the edges of every triangle in the scene with linewidth 2 and slightly behind the triangle. This linewidth 1 only limitation of modern OpenGL also is a problem with meshes on retina displays where the lines are too thin and hard to see. At any rate, there are ways to provide silhouette edges only on some models but not meshes. But they are hard to implement. I'll make a ticket for it but don't expect to be able to do it with our limited resources. https://plato.cgl.ucsf.edu/trac/ChimeraX/ticket/2765 So the best advice I have is show the atomic model and mesh without silhouettes or use Chimera. Tom Examle of mesh with silhouette edges > On Jan 18, 2020, at 4:01 PM, Gabriel Lander <glander(a)scripps.edu> wrote: > > Hi Tom, > One of the "go-to" representations to demonstrate the quality of a modeled PDB in an EM density is sticks shown in a volume mesh. In Chimera when you turn on silhouettes they would only show around the atoms, but not the mesh. This is not the case in ChimeraX, and renderings with silhouettes and meshes look really messy. Is there a way to specifically turn off silhouettes on meshes but not atoms? > Thanks, > -gabe > >

1 0

How to batch process structures?
by jacky zhao 21 Jan '20

21 Jan '20

Hi everyone, I have tried to use chimeraX yesterday. It is vey cool! I just wonder how to batch process the structures? We will generate more than thousands of structures and will analysis the binding interface. Can I use chimeraX to instantly show the interface interactions one by one? Thank you for your time. Jacky

3 5

Exporting image in 300 DPI
by Hassan Ahmed 21 Jan '20

21 Jan '20

Hello, I wanted to ask if it is possible on ChimeraX to export image with 300 or 150 DPI? I can not find a possible selection tool as the older chimera versions. Is there a certain command or an option to do it? Thank you in advance, Regards, Ahmed -- Ahmed Hassan Institute of Plant Biology Braunschweig University of Technology Spielmannstrasse 7 38106 Braunschweig Germany Tel: +49 - 531 - 391 5885 e-mail: a-a.hassan(a)tu-braunschweig.de

2 1

Tile a vseries
by Sean Connell 17 Jan '20

17 Jan '20

Hello, I was wondering if it is possible to tile multiple volume series such that one can have 2-3 series playing side by side? If so could you suggest the syntax for the tile command I cannot seem to get it right? I have the two vseries loaded as #1 and #2 (and each series has 10 sub volumes). I have tried variations of tile #1,2 columns 2 spacingFactor 1 and get errors like this: Traceback (most recent call last): File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/chimerax/cmd_line/tool.py", line 258, in execute cmd.run(cmd_text) File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/chimerax/core/commands/cli.py", line 2837, in run result = ci.function(session, **kw_args) File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/chimerax/std_commands/tile.py", line 27, in tile spacing = max([m.bounds().radius() for m in models]) * spacing_factor File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/chimerax/std_commands/tile.py", line 27, in <listcomp> spacing = max([m.bounds().radius() for m in models]) * spacing_factor AttributeError: 'NoneType' object has no attribute 'radius' AttributeError: 'NoneType' object has no attribute 'radius' File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/chimerax/std_commands/tile.py", line 27, in spacing = max([m.bounds().radius() for m in models]) * spacing_factor Thanks in advance for any suggestions you have. sean

2 1

Save scene like in "Chimera"
by Lau Kelvin 17 Jan '20

17 Jan '20

Hello all, Is there a save scene command like in chimera. I have found the command for positions via “view”. If not, its back to saving many sessions at the moment. Best, Kelvin -- Kelvin Lau https://people.epfl.ch/kelvin.lau Protein production and structure core facility - PTPSP EPFL SV PTECH PTPSP AI 2146 (Bâtiment AI) Station 19 CH-1015 Lausanne Switzerland Email: kelvin.lau(a)epfl.ch<mailto:kelvin.lau@epfl.ch> Phone: +41 21 69 30267<tel:+41%2021%2069%C2%A030267> If unreachable: +41 21 69 34494<tel:+41%2021%2069%C2%A030267>

3 4

ChimeraX-users January 2020