November 2021 - ChimeraX-users - RBVI Mailing Lists

Model info editing
by Eric Pettersen 16 Nov '21

16 Nov '21

Hi all, The current daily build (not 1.3 release candidate) has a new feature that may be of general interest. You can change the name/ID of a model in the Model Panel by double clicking on the corresponding field and entering a new value. --Eric Eric Pettersen UCSF Computer Graphics Lab

1 0

Feature request regarding clipping planes
by Pranav Shah 15 Nov '21

15 Nov '21

Hi Team, Chimera has really nice clipping planes visibility and UX in comparison to ChimeraX. While it may take some effort to include the middle-click based riflling through planes shortcut, in the short term would it be possible to change the color of the clipping planes to a color that isnt gray? Currently, it is quite hard to see the clipping planes in the default view (see attached image). Best, Pranav -- Pranav Shah Postdoctoral Research Fellow. Division of Structural Biology, Wellcome Trust Centre for Human Genetics, University of Oxford, Roosevelt Drive, Oxford OX3 7BN, UK

4 8

Re: [chimerax-users] Any interest in reading ModelArchive metadata from mmCIF files?
by Tom Goddard 12 Nov '21

12 Nov '21

Hi Elaine, This is related but a little different from what Ben was asking. It is different because the template and scoring data in the mmCIF tables could be shown no matter how the mmCIF file is loaded -- it would not be limited to fetching from ModBase. Maybe Ben has an opinion about how desirable it is to put the Chimera ModBase fetch capability into ChimeraX, and whether it is more or less desirable than making the new mmCIF tables accessible in ChimeraX, to help figure out priorities. Tom > On Nov 12, 2021, at 3:05 PM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Chimera had a ModBase Fetch: > > "a SwissProt, TrEMBL, GenPept or PIR accession code will be used to fetch comparative models in PDB format from ModBase (associated information will be shown in a model list)" > > https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/modbase.html <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/modbase.html> > > ...where "model list" is the same dialog as used to show Modeller results. Now that ChimeraX has a Modeller Results dialog for displaying the output from Comparative Modeling and Model Loops, could consider adding analogous Modbase fetch capability. > > I can make a ticket if anybody thinks that's a good idea. > > Elaine > > >> Begin forwarded message: >> >> From: Tom Goddard via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> >> Subject: Re: [chimerax-users] Any interest in reading ModelArchive metadata from mmCIF files? >> Date: November 12, 2021 at 2:56:49 PM PST >> To: Ben Webb <ben(a)salilab.org <mailto:ben@salilab.org>> >> Cc: ChimeraX Users Help <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> >> Reply-To: Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> >> >> >> So it looks like only ModBase would currently benefit from ChimeraX reading template sequences and alignments. I do not think it would be too hard to implement it. I've made a ChimeraX feature request for that >> >> https://www.rbvi.ucsf.edu/trac/ChimeraX/ticket/5601 <https://www.rbvi.ucsf.edu/trac/ChimeraX/ticket/5601>

2 1

Any interest in reading ModelArchive metadata from mmCIF files?
by Ben Webb 12 Nov '21

12 Nov '21

Do you have any plans to extend ChimeraX's mmCIF reader to parse and display metadata on theoretical models, such as quality scores or the alignments to template structures? The folks at PDB have recently done a lot of work to standardize this metadata in the MA mmCIF dictionary: https://mmcif.wwpdb.org/dictionaries/mmcif_ma.dic/Index/ The dictionary has already been adopted by ModelArchive (e.g. AlphaFold2 models) and by ModBase (Modeller models) and I believe that other repositories such as SwissModel are also moving in that direction. See e.g. mmCIF downloads at https://www.modelarchive.org/doi/10.5452/ma-bak-cepc-0250 https://modbase.compbio.ucsf.edu/modbase-cgi/model_search.cgi?databaseID=Q1… (My ulterior motive: we've previously built Chimera web data files to download a ModBase model and the accompanying alignment, and display them in Chimera; now that this data is embedded in the mmCIF file, in principle ChimeraX could do this itself in a less clunky and not ModBase-specific fashion.) Ben -- ben(a)salilab.org https://salilab.org/~ben/ "It is a capital mistake to theorize before one has data." - Sir Arthur Conan Doyle

2 1

Fit in map sequentially with global search?
by Oliver Clarke 12 Nov '21

12 Nov '21

Hi, I frequently use the "global search" option of fitmap in chimera to identify the orientation of proteins or fragments in my map. Fitmap has an option, "sequence", allowing the sequential fitting of multiple structures to a map, after subtracting the density corresponding to the previous fit, but this is not compatible with global search. Would it be possible to add an option to fitmap in ChimeraX such that it considers clashes with designated existing models? This would be useful when one is trying to fit the density of a weakly occupied binding partner in the context of a larger known structure. Presently, when one uses fitmap with global search in such a case, the binding partner frequently gets sucked in to the stronger density for the host protein, even when the density for the binding partner is visually clear. Cheers Oli

3 3

chimera x : how to increase font size of the command line display?
by Rangarajan, Amith 12 Nov '21

12 Nov '21

Dear All, I am wondering if there is a way to increase the font size of the command line display? I found this post with tom's comment https://www.cgl.ucsf.edu/pipermail/chimera-users/2020-April/016776.html [Chimera-users] Make command-line text bigger<https://www.cgl.ucsf.edu/pipermail/chimera-users/2020-April/016776.html> Hi Lothar, I don't know what problem you are encountering using ReadStdin on Windows. It may have something to do with Windows not allowing stdin/stdout for GUI apps. www.cgl.ucsf.edu not sure if things have changed after that. thanks , amith

2 1

saving PDB
by Noriega, Heather 11 Nov '21

11 Nov '21

Hello, I am going to attach my command line. OK, so I created a specific capsid that is not all one monomer. It has 3 different monomers in a specific ratio. I have toggled around with different options below to try to save in PDB, the save option from my understanding should be the selected only because this capsid was created using the matchmaker. I tried display only as well just to try to see if that worked. I also have used the relative model from biological assembly of 1LP3 and tried to save or not save options and have kept all consistent with hybrid 36 (default). All these options say "saved", however when i go to open any of them, they do not at all. My objective is to save the whole capsid so when I open it I can perform the density map to measure the volume inside. The weird part of this is when I open these saved creations in Chimera they will open how I want them to, but not in ChimeraX. I am not too sure why. Please help me and I hope everyone is well, have a good night. UCSF ChimeraX version: 1.3.dev202110160902 (2021-10-16) © 2016-2021 Regents of the University of California. All rights reserved. open "C:\Users\Haten\Documents\AAVgene\AAV 3B VP1 VP2 VP3 118.cxs" format session Log from Mon Nov 1 22:55:58 2021opened ChimeraX session save "C:/Users/Haten/Documents/AAVgene/why wont you open.pdb" models #2-61 displayedOnly true relModel #1 close session open "C:\Users\Haten\Documents\AAVgene\why wont you open.pdb" format pdb UCSF ChimeraX version: 1.3.dev202110160902 (2021-10-16) © 2016-2021 Regents of the University of California. All rights reserved. open "C:\Users\Haten\Documents\AAVgene\AAV 3B VP1 VP2 VP3 118.cxs" format session Log from Mon Nov 1 22:55:58 2021opened ChimeraX session save "C:/Users/Haten/Documents/AAVgene/why wont you open 2.pdb" models #2-61 selectedOnly true close session open "C:\Users\Haten\Documents\AAVgene\why wont you open 2.pdb" format pdb Thank you, Heather Noriega PhD-Pharmaceutical Science student Howard University heather.noriega(a)bison.howard.edu 520-203-1883

3 7

An inquiry
by Victor Ejigah 11 Nov '21

11 Nov '21

Hi Elaine, I am using chimeraX for protein analysis and simulations and recently, we have a question we want to explore by first simulating before going to the wet lab. We want to conjugate a polymer of different molecular weight to an antibody and thereafter determine the impact of the MW of each polymer on the binding affinity of the mAB to its ligand. Therefore, we want to know 1) Can we create polymers of different sizes with chimera? If not, can you recommend alternatives? 2) What tool can we use for conjugation( assuming chimera can be of help)? 3) Can such conjugates be exported to Chimera1.5 for MD ensemble since Chimera X does not have this feature? I will be most glad to hear from you soon. Kind regards, Victor (PhD student @Howard University)

2 3

vop min/max threshold
by Stapleton kevin2017/4/3 11 Nov '21

11 Nov '21

Hello everyone! just trying to get my head around a small problem, but one my brain turns into spaghetti. I am trying to save a density from molmap with a threshold range of given values. for example: open 2gbp molmap #1 10 >From the resulting density (now ID #2) I want to save the map at a very narrow threshold range. for example the current range is 0.0-0.528. But I would like to save the map with a "restricted" level of 0.26-0.27. I have been playing with the vop min/max threshold xxx set 0/1 commands but I keep getting turned around. here is what I did: open 2gbp molmap #1 10 - produces a new map ID #2 vop threshold #2 minimum 0.26 set 0 vop threshold #3 maximum 0.27 set 1 I used the set 0/1 because I want the range 0.26-0.27 to have the density values and anything outside of that to have zero. Like a mask in relion. But for my specific case relion_mask wont work as well. Somewhere I am turning the options around and it has my brain flattened. Any help is appreciated. All the best and thanks for making my science life 1Million times easier with your wonderful program :-) Kako

2 3

Improved VR support in ChimeraX
by tolung.bio＠gmail.com 10 Nov '21

10 Nov '21

Hi, The VR support in ChimeraX and meeting functionality has a great potential especially for teaching and educational purposes. Are you planning to improve that to bring it to the same level as Nanome (or close)? For example, a dedicated VR GUI interface for better VR usability? Cheers, Gökhan

2 1