July 2021 - ChimeraX-users - RBVI Mailing Lists

Surface dust command in the .cxc script
by 李泽 24 Feb '25

24 Feb '25

Hi all: I'm trying to use the .cxc script to run the software, I found that the "surface dust" command has never been executed in it. Have anyone met the same problem? Any suggestions. Thank you all. Best, Ze

3 3

Get color code of a custom color
by Ahmad Khalifa 11 Feb '25

11 Feb '25

I created a custom color that I want to use in a different session. is there a way to do that besides trying to match colors by eye? Regards.

5 4

Double and Triple Bond Stick Style
by Smith, Chase 05 Feb '25

05 Feb '25

Dear ChimeraX, I was just wondering why there is no way to represent a double or triple bond in either the ligands or the protein amino acids when viewing as a Stick or Ball-and-Stick representation? I sometimes use Chimera or ChimeraX to make visuals for my lectures, and the students often have difficulty in understanding due to the absence of the multiple bonds. I would love to have the ability to represent the double or triple bonds with multiple lines between the atoms. Thank you, Chase Smith ... ChaseSmith, PhD Chair, Department of Pharmaceutical Sciences & Associate Professor of Medicinal Chemistry School of Pharmacy MCPHS University 19 Foster Street | WorcesterMA01608 T 508.373.5717F 508.890.5618C 978.855.7203 chase.smith(a)mcphs.edu www.mcphs.edu MCPHS University Confidentiality Note: This e-mail, and any attachment to it, is intended to be confidential and might be legally privileged. It is intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that reading, copying, disseminating or distributing this email is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you.

5 5

Quest 2 Support?
by Blaine Hewitt 27 Dec '24

27 Dec '24

Hello, my name is Blaine Hewitt. Now I know that you have stated previously that you have no intention of bringing support to the Oculus Quest. Which is completely understandable since I know that not only would you have to develop around a completely new Operating System but another CPU architecture and much much more I assume. But with the soon release of the Oculus Quest 2 and it's new XR 2 chip-set makes a pretty good argument for it. As this would allow for much easier use in education (as is what I am attempting to do with it). I think it will be even easier now to push updates with SideQuest <https://sidequestvr.com/> being relatively simple to setup. I know that another (Naome <https://blog.matryx.ai/nanome-on-quest-public-beta-is-now-available-b546321…>) program is already available on the platform. But I do like your program a lot more since it is able to be used for free unlike Nanome Pricing <https://nanome.ai/pricing/> which is... as to say unappealing to public schools (such as mine). I was was also thinking (sorry if I am becoming annoying at this point) that if you do make a version of the Quest that you could make that GitHub branch available to the public. As for example while I may not be great at understanding complex protein structures I can help to make the whole experience more user friendly. Anyways if you read this far thank you for taking time from your day to read this. If you want to know who I am, my name is Blaine I am in my senior year of High School (Waynecsd <https://wh.waynecsd.org/>). I have to do a project by the end of the year where I have to present an area of study I want to pursue and I decided to research the effects of VR on the human's ability to learn and retain information. Budget..... None

4 3

Apple silicon (M1 chip) native version?
by Jeffrey D. Hartgerink 28 Apr '22

28 Apr '22

Are there any plans for an Apple Silicon (M1 chip) native version of ChimeraX? While things work ok via the Rosetta emulator, it would be great to have the performance from a native app. -------------------------------------- Jeffrey D. Hartgerink, Ph.D. Prof. of Chemistry and Bioengineering Rice University, MS 602 6100 Main Street Houston, TX 77005 jdh(a)rice.edu / 713-348-4142 hartgerink.rice.edu

4 8

Difficulties Visualizing Isosurfaces from Cube File - Nathan Wood
by Nathan Wood 09 Aug '21

09 Aug '21

Dear ChimeraX I was having difficulty attempting to visualize computationally generated electrostatic potential isosurfaces originating from a Gaussian *.cube file. I tried to open the cube file from the shell only for it to incompletely visualize. I can provide an image if necessary. I found the following correspondence concerning cube files and isosurfaces, but unfortunately I am unable to resolve the issues of the cube file visualizing. https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2021-April/002126.html <https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2021-April/002126.html> https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2020-May/001110.html <https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2020-May/001110.html> I was curious if anyone has had experience with cubefiles. Any assistance would be greatly appreciated, Very Respectfully, Nathan Wood

3 3

Showing C-alphas
by Casey 30 Jul '21

30 Jul '21

I am trying to show a single sphere at c-alpha carbons for some point mutants that i designed. When I use the command: show /a:473,476,477 atoms I can see all the atoms in chain A for residues 473, 476, 477. Using: show /a:473,476,477@cb atoms I can show "two spheres" for the c-alpha and c-beta carbon. When I use: show /a:473,476,477@ca atoms nothing happens and i don't see any spheres. If I show the full atom and then do: hide /a:473,476,477@ca* atoms Just the c-alpha sphere gets hidden. Why is it that i can't just show the c-alpha spheres? Unfortunately for my figure i make silhouettes of my model and so i can't just hide the other atoms by making them fully transparent

2 1

Re: [chimerax-users] Automating Map segment
by Tom Goddard 30 Jul '21

30 Jul '21

To group by connectivity looks like you need to add d._group_con.value = True To figure out this stuff you would need to look at the Segger user interface code, it is in the ChimeraX distribution (under site-packages/chimerax/segger/segment_dialog.py) or on GitHub https://github.com/tomgoddard/segger/blob/master/Segger/src/segment_dialog.… <https://github.com/tomgoddard/segger/blob/master/Segger/src/segment_dialog.…> Tom > On Jul 30, 2021, at 10:42 AM, Sam W Marchant <smarchant(a)UCSD.EDU> wrote: > > Thanks so much im trying to group by connectivity and I am having trouble finding the right line of code to add that ability. Any thoughts? > >> On Jul 29, 2021, at 3:56 PM, Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> wrote: >> >> Hi Sam, >> >> I did an initial port of Segger from Chimera to ChimeraX (also called Segment Map) but that code was written by Greg Pintilie and he has not worked the ChimeraX version so there is no new command to run it in a script. It would probably not be too hard to write some Python to run it. The Chimera script mentioned in the mailing list is attached to my message about it. >> >> https://plato.cgl.ucsf.edu/pipermail/chimera-users/2017-October/013979.html <https://urldefense.proofpoint.com/v2/url?u=https-3A__plato.cgl.ucsf.edu_pip…> >> >> That won't work in ChimeraX, but here I attach the equivalent for ChimeraX. >> >> Segger was developed to segment molecules in EM maps, so I have doubts that it will do much good for your light microscopy. But you can decide that by running it by hand on some time steps and see if you like the result. >> >> Here is a different approach we used to quantify protrusions of crawling neutrophils in light sheet microscopy by placing markers that might be of interest. >> >> https://www.cgl.ucsf.edu/chimera/data/protrusion-sep2015/protrusions.html <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.cgl.ucsf.edu_chime…> >> >> Tom >> >> >> >>> On Jul 29, 2021, at 3:24 PM, Sam W Marchant via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >>> >>> Hi, >>> I am looking to apply the Map Segmenting to multiple time series of light sheet imaging and so I was wondering if there is either a command or a python function to automate the process. It looks here <https://urldefense.proofpoint.com/v2/url?u=http-3A__plato.cgl.ucsf.edu_pipe…> that you said it was going to be added to ChimeraX but I cannot find any info on how to do it. If not you mentioned a script in this answer, could you potentially send that to me? >>> Thanks, >>> Sam Marchant. >>> _______________________________________________ >>> ChimeraX-users mailing list >>> ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> >>> Manage subscription: >>> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users <https://urldefense.proofpoint.com/v2/url?u=https-3A__plato.cgl.ucsf.edu_mai…> >> >> <segscript.py> >

1 0

How to Align Chromosome Models with Different Number of Atoms?
by Cardiff Jiang 30 Jul '21

30 Jul '21

Dear ChimeraX User List, How can I compare two chromosome 3D models (PDB files) that have different numbers of "atoms"? Matchmaker tool reports, "Reference and/or match model contains no nucleic or amino acid chains. Use the command-line 'align' command to superimpose small molecules/ligands." align #1 toAtoms #2 reports, "Unequal number of atoms to pair, 49 and 63." align #1 toAtoms #2 matchNumbering true reports, "Pairing dropped 49 atoms and 63 reference atoms. No atoms paired for alignment." align #1:1-40 to #2:1-40 reports, "No atoms paired for alignment." How should I compare two chromosome 3D models below? Thank you. [image: image.png] Best regards, Zichen "Cardiff" Jiang

4 9

Automating Map segment
by Sam W Marchant 29 Jul '21

29 Jul '21

Hi, I am looking to apply the Map Segmenting to multiple time series of light sheet imaging and so I was wondering if there is either a command or a python function to automate the process. It looks here<http://plato.cgl.ucsf.edu/pipermail/chimera-users/2017-October/013980.html> that you said it was going to be added to ChimeraX but I cannot find any info on how to do it. If not you mentioned a script in this answer, could you potentially send that to me? Thanks, Sam Marchant.

2 1