July 2021 - ChimeraX-users - RBVI Mailing Lists

Model missing residues in Chimera X
by He, Amy 23 Jul '21

23 Jul '21

Dear Chimera X community, I’m a new user of Chimera X and I have a question about the built-in Modeller function in Chimera X Previously in Chimera 2, we use the “Model/Refine Loop” function to model missing residues in the experimental structure, before any further calculation or simulations. The “Model/Refine Loop” function uses Modeller and the function provides modeled, complete structures in which the non-missing residues do not move. In Chimera X, a similar function is “Modeller Comparative” but it works differently. The “Modeller Comparative” performs a modeling for the full structure with the given sequence. Is possible in Chimera X to model the missing residues, without moving the existent residues? Thank you for your kind advice in advance! Thanks, Amy -- Amy He Chemistry Graduate Teaching Assistant Hadad Research Group Ohio State University he.1768(a)osu.edu<mailto:he.1768@osu.edu>

2 2

How to access ChimeraX remotely from macbook (OS mojave)?
by Rayees Mattoo 23 Jul '21

23 Jul '21

Hi, I am trying to access ChimeraX remotley using my mac book pro. The ChimeraX is installed on linux machine. Upon launching, the chimeraX GUI appears and suddenly disappears with the following error message: "ChimeraX requires OpenGL graphics version 3.3. Your computer graphics driver provided version 1.4, Try updating your graphics driver". My mac currently has macOS mojave version 10.14.6 and it seems it does not have OpenGL graphics version 3.3 required to display chimeraX remotely. Is there any way out to fix the problem? Not sure if updating my macbook to Catalina or BigSur is going to help! Best Rayees

3 2

Re: [chimerax-users] How to access ChimeraX remotely from macbook (OS mojave)?
by Tom Goddard 23 Jul '21

23 Jul '21

Hi Rayees, Mac Air graphics is pretty slow for running ISOLDE. But Tristan Croll who develops ISOLDE added a nice option "Sim Fidelity" to the ISOLDE panel in the middle -- by default it is set to "High" and setting it to "Quick" will make the simulations run much faster. Here is what Tristan told me about what it does: "The latest ISOLDE release has new “sim fidelity” radio buttons on the “Sim settings” tab. The “quick” mode (no implicit solvent, nonbonded cutoff tightened to 9 Å) runs about 4x faster on my MacBook Air and still gives reasonable results in good density. Still not *fast*, but I think definitely usable." This is in ISOLDE 1.2.2. If you need to update ISOLDE use ChimeraX menu Tools / More Tools.... If this is still too slow, I'm afraid it is a limitation. You have to use faster hardware. The realtime dynamics simulations used by ISOLDE need fast graphics - the molecular dynamics is done with OpenMM using OpenCL or CUDA GPU accelerated computation. CUDA is fastest and needs Nvidia graphics and the CUDA driver installed -- Macs don't support Nvidia gpus. The macOS OpenCL implementation is very slow, almost as slow as just running on the CPU. Tristan has ISOLDE benchmarks on different hardware here https://isolde.cimr.cam.ac.uk/performance-benchmarks/ Tom > On Jul 22, 2021, at 6:03 PM, Rayees Mattoo <rmattoo(a)stanford.edu> wrote: > > Hi Tom, > Thanks for responding. Actually, I wanted to run ISOLDE from chimeraX and already tried it running on Mac with my 500KDa protein complex. It was very slow, wanted to try on linux machine and ran into the OpenGL problem. Do you have any suggestions how to run ISOLDE faster on mac? > > Best > Rayees > From: Tom Goddard <goddard(a)sonic.net> > Sent: Thursday, July 22, 2021 5:32 PM > To: Rayees Mattoo <rmattoo(a)stanford.edu> > Cc: chimerax-users(a)cgl.ucsf.edu <chimerax-users(a)cgl.ucsf.edu>; chimerax-bugs(a)cgl.ucsf.edu <chimerax-bugs(a)cgl.ucsf.edu> > Subject: Re: [chimerax-users] How to access ChimeraX remotely from macbook (OS mojave)? > > Hi Rayees, > > I guess you have X Windows (XQuartz) running on your Mac and are hoping that X remote display from Linux to the Mac will work with ChimeraX. Unfortunately X Windows remote display of 3D OpenGL graphics has not worked reliably since the days Silicon Graphics computers in the 1990s. It is possible to get it to work between two Linux machines with identical OpenGL drivers. But it would be a near miracle if the XQuartz implementation of X Windows on Mac could handle the OpenGL from a Linux machine. > > The sensible approach is to run ChimeraX directly on your MacBook Pro. We don't recommend remote display even when it works because rendering speed is likely to be poor. > > Tom > > >> On Jul 22, 2021, at 1:31 PM, Rayees Mattoo via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >> >> Hi, >> I am trying to access ChimeraX remotley using my mac book pro. The ChimeraX is installed on linux machine. Upon launching, the chimeraX GUI appears and suddenly disappears with the following error message: "ChimeraX requires OpenGL graphics version 3.3. Your computer graphics driver provided version 1.4, Try updating your graphics driver". >> My mac currently has macOS mojave version 10.14.6 and it seems it does not have OpenGL graphics version 3.3 required to display chimeraX remotely. Is there any way out to fix the problem? Not sure if updating my macbook to Catalina or BigSur is going to help! >> >> Best >> Rayees >> >> >> _______________________________________________ >> ChimeraX-users mailing list >> ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> >> Manage subscription: >> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users <https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users>

1 0

Re: [chimerax-users] python loop with ChimeraX
by Rangarajan, Amith 21 Jul '21

21 Jul '21

Hi, I am new to chimeraX , i want to loop through a set of biological assemblies measuring SASA of selecting residues and write them to a file. I need some help with starting on this .How to include this into the .cxc script? is there a example somewhere? please share your tips and suggestions, thanks everyone ! warm regards, Amith

4 8

Hide dust tool & threshold of the map
by Dmitry Semchonok 20 Jul '21

20 Jul '21

Dear colleagues, I would like to ask you for the common practice in showing the threshold of the 3D map and usage of the "hide dust tool”. Am I allowed to use the “hide dust tool” when making the figures for the paper? And if yes, if/how shall I specify that in the description to the figure? Thank you Sincerely, Dmitry

2 1

Moving labels
by Maciej Basczok 15 Jul '21

15 Jul '21

Dear ChimeraX staff, I have a problem with moving 3D labels. I would like to move them in the z-axis, but I cannot find how to do it. My version is 1.2.5. In some earlier release it could be done with the right mouse button + ctrl, but it seems to be changed. I have also tried to find a solution in archive messages, but the hint to click favourites and preferences also appears to be no longer an issue. Under favourites, there are no preferences or mouse settings. I would be extremely grateful for any suggestions. Kind regards, Maciej

2 3

scale_bar
by Dmitry A. Semchonok 10 Jul '21

10 Jul '21

4 7

Making movie with crop function
by SHIQING LIAO 08 Jul '21

08 Jul '21

Hi there! I am trying to make movies with different cropped views in order to see the inside of my 3D model. I tried view name command and it cannot store the cropped information. The command seems to only work with rotation and translation. Any help would be appreciated! Best, Shiqing

2 1

fit map and bring other maps or models with it
by Alpay Burak Seven 07 Jul '21

07 Jul '21

Hi ChimeraX developers, I would like to fit one map to another and move some other maps with it using ChimeraX. This was possible with matrixcopy in Chimera. In ChimeraX, this type of translation/rotation is possible with matchmaker using "match #2 to #1 bring #3" I believe bring option is not available to "fitmap" command. Please let me know if there is a way. Would it be possible to implement the bring option to fitmap command or implement the matrixcopy command to ChimeraX? Kind regards, -- Alpay B. Seven Stanford University

2 2

Question about libLLVM
by Zhe Wang 07 Jul '21

07 Jul '21

Hi, We were trying to install ChimerX 1.2 on our Centos 8 system. It seems like ChimeraX 1.2 asks for libLLVM with version 10 which is not a default package that built in the rpm. The default one for CentOS 8 is version 9. Centos 7 does not provide and not available in EPEL either. Could ChimeraX provide the corresponding library for centos 8 and 7? Another question that I have is if the following is correct for ChimeraX 1.1: ChimeraX 1.1 is using the default libLLVM3.9-mesa.so for centos 8. And for centos 7, you have ChimeraX 1,1 using the libOSMesa.so.8.0.0 which ChimeraX provided, as I see ChimeraX 1.1 works fine one both, but not 1.2. Best, Zhe

3 6