August 2022 - ChimeraX-users - RBVI Mailing Lists

Surface dust command in the .cxc script
by 李泽 24 Feb '25

24 Feb '25

Hi all: I'm trying to use the .cxc script to run the software, I found that the "surface dust" command has never been executed in it. Have anyone met the same problem? Any suggestions. Thank you all. Best, Ze

3 3

Get color code of a custom color
by Ahmad Khalifa 11 Feb '25

11 Feb '25

I created a custom color that I want to use in a different session. is there a way to do that besides trying to match colors by eye? Regards.

5 4

Double and Triple Bond Stick Style
by Smith, Chase 05 Feb '25

05 Feb '25

Dear ChimeraX, I was just wondering why there is no way to represent a double or triple bond in either the ligands or the protein amino acids when viewing as a Stick or Ball-and-Stick representation? I sometimes use Chimera or ChimeraX to make visuals for my lectures, and the students often have difficulty in understanding due to the absence of the multiple bonds. I would love to have the ability to represent the double or triple bonds with multiple lines between the atoms. Thank you, Chase Smith ... ChaseSmith, PhD Chair, Department of Pharmaceutical Sciences & Associate Professor of Medicinal Chemistry School of Pharmacy MCPHS University 19 Foster Street | WorcesterMA01608 T 508.373.5717F 508.890.5618C 978.855.7203 chase.smith(a)mcphs.edu www.mcphs.edu MCPHS University Confidentiality Note: This e-mail, and any attachment to it, is intended to be confidential and might be legally privileged. It is intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that reading, copying, disseminating or distributing this email is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you.

5 5

Quest 2 Support?
by Blaine Hewitt 27 Dec '24

27 Dec '24

Hello, my name is Blaine Hewitt. Now I know that you have stated previously that you have no intention of bringing support to the Oculus Quest. Which is completely understandable since I know that not only would you have to develop around a completely new Operating System but another CPU architecture and much much more I assume. But with the soon release of the Oculus Quest 2 and it's new XR 2 chip-set makes a pretty good argument for it. As this would allow for much easier use in education (as is what I am attempting to do with it). I think it will be even easier now to push updates with SideQuest <https://sidequestvr.com/> being relatively simple to setup. I know that another (Naome <https://blog.matryx.ai/nanome-on-quest-public-beta-is-now-available-b546321…>) program is already available on the platform. But I do like your program a lot more since it is able to be used for free unlike Nanome Pricing <https://nanome.ai/pricing/> which is... as to say unappealing to public schools (such as mine). I was was also thinking (sorry if I am becoming annoying at this point) that if you do make a version of the Quest that you could make that GitHub branch available to the public. As for example while I may not be great at understanding complex protein structures I can help to make the whole experience more user friendly. Anyways if you read this far thank you for taking time from your day to read this. If you want to know who I am, my name is Blaine I am in my senior year of High School (Waynecsd <https://wh.waynecsd.org/>). I have to do a project by the end of the year where I have to present an area of study I want to pursue and I decided to research the effects of VR on the human's ability to learn and retain information. Budget..... None

4 3

ISOLDE and secondary structure restraints
by Guido Hansen 17 Nov '23

17 Nov '23

Hi all, I just started model building in cryoEM maps and get great results using ISOLDE on AlphaFold2-derived initial models. I have a question which is mainly directed to Tristan I guess: Is is possible to use the command line/script to apply secondary structure restraints in ISOLDE? I would like to restrain the initial secondary structure assignment from Alphafold especially at resolution worse than 3.5 A. At the moment I select each and every residue range assigned to helix, parallel or antiparallel beta-strand one after the other and turn on the corresponding restrains in the ISOLDE GUI. Is there a better way via command line of script? Cheers, Guido -- PD Dr. Guido Hansen Group Leader UNIVERSITÄT ZU LÜBECK INSTITUT FÜR BIOCHEMIE Tel +49 451 3101 3122 Fax +49 451 3101 3104 E-Mail hansen(a)biochem.uni-luebeck.de www.biochem.uni-luebeck.de [1] Ratzeburger Allee 160 23562 Lübeck Links: ------ [1] http://www.biochem.uni-luebeck.de

4 5

Export list of contacts
by Asmahan Alghamdi 12 Sep '22

12 Sep '22

Dear Chimerax team, Thanks a lot for the extremely useful software that has been helping a great deal in improving my protein complex investigations. Recently I succeeded in using version 1.5 to determine contacts and the correlated confidence but exporting that list of contact not clear to me yet although searched within software guide and tutorials available online. Your help would be much appreciated in this respect. Thanks in advance Asmahan Alghamdi The university of Nottingham Get Outlook for iOS<https://aka.ms/o0ukef> This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please contact the sender and delete the email and attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. Email communications with the University of Nottingham may be monitored where permitted by law.

3 5

Proposal to an add on
by Noriega, Heather 31 Aug '22

31 Aug '22

Hello, I hope everyone is doing well. I know I have asked this before about the molmaps and have been trying to work around the "holes", in order to create a solid map for the inner volume calculation. It works very well with the AAVs, however with the other subfamilies because of their larger pores it makes it to where it is an inconsistent volume contour, and I believe it throws off the inner volume calculations. I propose to add an element to only cover the pores as a means to make the contour thinner to create a more realistic inner volume calculation. I would like to help with this feature, as my skills have improved within the last year since I first started using Chimera and ChimeraX for my project. I am unsure how I go about this and your response. I have reached out before and most of the time it ends in maybe trying another software. There is no other software that is remotely comparable to this molmap feature that is as user-friendly as it is in ChimeraX. I would really like to continue the use of ChimeraX. I have also thought of possibly trying to create a way for the molecular surface to work with the volume blob feature, but it still comes down to the pores creating the holes. A mechanism to create a feature of only covering the pores could be useful for not only my project but others that may have similar issues. Please let me know what your thoughts are as I would like to contribute to this resolution, but would also need some direction on how to start it. Thank you and I hope to hear from you soon. Thank you, Heather Noriega PhD-Pharmaceutical Science student Howard University heather.noriega(a)bison.howard.edu 520-203-1883

3 2

Displaying the main chain of residues
by Diksha Parwana 31 Aug '22

31 Aug '22

Hello, I want to display the main chain as well as the side chain of my selected residues. The main chain is only displayed when I use the hide cartoon feature. Is there some way I can see the backbone of my residues without deleting the chain as I don't want to break the continuity? I want to study both backbone and side chain interactions of my residues. Please let me know if there's a way. I'll highly appreciate it. Thanks & regards,

2 1

Help with Zone features
by Binh Nguyen 31 Aug '22

31 Aug '22

Dear ChimeraX developers, Would you please show me how to make this following figure? [cid:01baf593-38aa-4ef0-8392-146a9fb2e78d] I have learned that this is a feature in zone feature and probably solvent accessible surface, but I do not know how to make it. Any hint is much appreciated. Warm regards, B _____________________________________________ Binh A. Nguyen, Ph.D. @ Saelices's Lab Center for Alzheimer’s and Neurodegenerative Diseases Peter O’Donnell Jr. Brain Institute UT Southwestern Medical Center ________________________________ UT Southwestern Medical Center The future of medicine, today.

4 7

Color atoms by kdHydrophobicity
by Daniel Gurnon 30 Aug '22

30 Aug '22

Hi all, I use Chimera mostly for teaching purposes, and while Chimera X is definitely more user friendly for students, there are occasionally things I like from the legacy version that I can't find on a menu in the new program. One such feature is "Render by attribute". While the mlp command can create a lipophilicity surface, when I teach protein folding I like to have students visualize all atoms, with residues colored by kdHydrophobicity. Is there a simple way to implement this? Thanks Dan ____________________________ Daniel Gurnon, Ph. D. Associate Professor of Chemistry and Biochemistry DePauw University Greencastle, IN 46135

4 6