September 2022 - ChimeraX-users - RBVI Mailing Lists

Surface dust command in the .cxc script
by 李泽 24 Feb '25

24 Feb '25

Hi all: I'm trying to use the .cxc script to run the software, I found that the "surface dust" command has never been executed in it. Have anyone met the same problem? Any suggestions. Thank you all. Best, Ze

3 3

Get color code of a custom color
by Ahmad Khalifa 11 Feb '25

11 Feb '25

I created a custom color that I want to use in a different session. is there a way to do that besides trying to match colors by eye? Regards.

5 4

Double and Triple Bond Stick Style
by Smith, Chase 05 Feb '25

05 Feb '25

Dear ChimeraX, I was just wondering why there is no way to represent a double or triple bond in either the ligands or the protein amino acids when viewing as a Stick or Ball-and-Stick representation? I sometimes use Chimera or ChimeraX to make visuals for my lectures, and the students often have difficulty in understanding due to the absence of the multiple bonds. I would love to have the ability to represent the double or triple bonds with multiple lines between the atoms. Thank you, Chase Smith ... ChaseSmith, PhD Chair, Department of Pharmaceutical Sciences & Associate Professor of Medicinal Chemistry School of Pharmacy MCPHS University 19 Foster Street | WorcesterMA01608 T 508.373.5717F 508.890.5618C 978.855.7203 chase.smith(a)mcphs.edu www.mcphs.edu MCPHS University Confidentiality Note: This e-mail, and any attachment to it, is intended to be confidential and might be legally privileged. It is intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that reading, copying, disseminating or distributing this email is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you.

5 5

Quest 2 Support?
by Blaine Hewitt 27 Dec '24

27 Dec '24

Hello, my name is Blaine Hewitt. Now I know that you have stated previously that you have no intention of bringing support to the Oculus Quest. Which is completely understandable since I know that not only would you have to develop around a completely new Operating System but another CPU architecture and much much more I assume. But with the soon release of the Oculus Quest 2 and it's new XR 2 chip-set makes a pretty good argument for it. As this would allow for much easier use in education (as is what I am attempting to do with it). I think it will be even easier now to push updates with SideQuest <https://sidequestvr.com/> being relatively simple to setup. I know that another (Naome <https://blog.matryx.ai/nanome-on-quest-public-beta-is-now-available-b546321…>) program is already available on the platform. But I do like your program a lot more since it is able to be used for free unlike Nanome Pricing <https://nanome.ai/pricing/> which is... as to say unappealing to public schools (such as mine). I was was also thinking (sorry if I am becoming annoying at this point) that if you do make a version of the Quest that you could make that GitHub branch available to the public. As for example while I may not be great at understanding complex protein structures I can help to make the whole experience more user friendly. Anyways if you read this far thank you for taking time from your day to read this. If you want to know who I am, my name is Blaine I am in my senior year of High School (Waynecsd <https://wh.waynecsd.org/>). I have to do a project by the end of the year where I have to present an area of study I want to pursue and I decided to research the effects of VR on the human's ability to learn and retain information. Budget..... None

4 3

ISOLDE and secondary structure restraints
by Guido Hansen 17 Nov '23

17 Nov '23

Hi all, I just started model building in cryoEM maps and get great results using ISOLDE on AlphaFold2-derived initial models. I have a question which is mainly directed to Tristan I guess: Is is possible to use the command line/script to apply secondary structure restraints in ISOLDE? I would like to restrain the initial secondary structure assignment from Alphafold especially at resolution worse than 3.5 A. At the moment I select each and every residue range assigned to helix, parallel or antiparallel beta-strand one after the other and turn on the corresponding restrains in the ISOLDE GUI. Is there a better way via command line of script? Cheers, Guido -- PD Dr. Guido Hansen Group Leader UNIVERSITÄT ZU LÜBECK INSTITUT FÜR BIOCHEMIE Tel +49 451 3101 3122 Fax +49 451 3101 3104 E-Mail hansen(a)biochem.uni-luebeck.de www.biochem.uni-luebeck.de [1] Ratzeburger Allee 160 23562 Lübeck Links: ------ [1] http://www.biochem.uni-luebeck.de

4 5

morph question
by Krishnan Raman 29 Sep '22

29 Sep '22

The morph creates a new model; when i display this new model the last(frame) with final conformation shows up on the screen. is there a way to show the first frame when i play the morph using an executable command? i do have to show the model to play the morph using coordset command. thanks Krishnan CONFIDENTIALITY NOTICE This email, including any attachments, may contain confidential or legally privileged information that is intended only for the individual or entity to whom it is addressed. If you are not the intended recipient, please be advised that any dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please reply to the sender so that BioCryst Pharmaceuticals, Inc. can take corrective measures and then permanently delete this email and any attachment, including any printed copies. Thank you.

2 1

Question about resfit command
by Mary Liu 28 Sep '22

28 Sep '22

Dear Chimera X users, Is it possible to show the fit of each nucleotide (not amino acid residue) in density using the resfit command or something like that? Thanks

2 2

Re: [chimerax-users] alphafold contacts output
by Elaine Meng 28 Sep '22

28 Sep '22

> On Sep 27, 2022, at 1:59 PM, McClean, Phillip <phillip.mcclean(a)ndsu.edu> wrote: > > Hi Elaine, > > I am using output data from alphafold2 multimer as provided by Colabfold. Following the video (https://www.youtube.com/watch?v=TMcjEecFHaI&t=6s) I use the following command: > > > alphafold contacts /b to /c distance 8 > > For my complex, the links at the distance are all blue (good results). What is confusing is that the distance of some of the contacts are greater than 8 angstroms. Those distances are between backbone carbon atoms, I assume. The fact that the command asks for amino acid pairs that are less than 8 angstroms apart suggest that other atoms than those in the backbone are less than 8 angstroms. Is my conclusion correct. > > Thanks as always for the advise. > > Phil Hi Phil, Yes, your conclusion is correct - the distance cutoff applies to any atom in the residue within any atom in the other residue, whereas the pseudobond is drawn between alpha-carbons, as mentioned here: <https://rbvi.ucsf.edu/chimerax/docs/user/commands/alphafold.html#contacts> We generally recommend sending questions to chimerax-users(a)cgl.ucsf.edu (CC'd here) since many heads are better than my one, unless you are including some data that needs to remain private. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

2 1

Fitmap on a subvolume?
by vincent Chaptal 27 Sep '22

27 Sep '22

Hi, I'd like to compare 2 maps, and would like to superposse them on specific portions of the map. Is there a way to do this? I was thinking to assign a pdb to each map, and apply a superposition of pdb1 onto pdb2 and have the maps follow the movement? Thank you Vincent -- Vincent Chaptal, PhD Director of GdR APPICOM Drug Resistance and Membrane Proteins Lab MMSB -UMR5086 7 passage du Vercors 69007 LYON FRANCE +33 4 37 65 29 01 http://www.appicom.cnrs.fr http://mmsb.cnrs.fr/en/

3 2

transparency
by Krishnan Raman 26 Sep '22

26 Sep '22

How to set transparency on surfaces during morphing? I start out with 95% but end up with 0%. The morphing works well though. Krishnan Raman Executive Director, Structural Biology BioCryst Pharmaceuticals CONFIDENTIALITY NOTICE This email, including any attachments, may contain confidential or legally privileged information that is intended only for the individual or entity to whom it is addressed. If you are not the intended recipient, please be advised that any dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please reply to the sender so that BioCryst Pharmaceuticals, Inc. can take corrective measures and then permanently delete this email and any attachment, including any printed copies. Thank you.

3 2