November 2023 - ChimeraX-users - RBVI Mailing Lists

Not able to see Glycines in stick form
by Firdous Tarique 14 Nov '23

14 Nov '23

Hi everyone In ChimeraX I am not able to show Gly simultaneously as a stick and cartoon. If I am trying to show Gly as a stick then the cartoon line breaks up at this position. And this is for any of the structures if you see. By showing a cartoon and stick together, the sticks for all amino acids show up except for Gly where it remains in the cartoon (you can try that). My aim is to show the thioester bond between Gly and Cys of two chains which I am able to create in Coot through Molecule Link but not able to see in ChimeraX. The moment I am trying to show Gly in stick form at this position it breaks the cartoon. I realised that this is for all the Glycines in the structure. Showing stick and cartoon together shows all amino acids in the stick except Glycine. (However this is not the case in Pymol and Chimera). Do you know any tricks to fix that in ChimeraX? Best Firdous

2 2

(no subject)
by Enrico Martinez 14 Nov '23

14 Nov '23

Dear Chimera-X users! I am trying to record md trajectory loaded in the chimera as

1 0

Re: [ccpem] Making thioester bond in Chimera/ChimeraX
by Elaine Meng 13 Nov '23

13 Nov '23

Hi Firdous, No trick, it is an option of cartoon (on by default) to prevent showing backbone atoms at the same time. Glycine only has backbone atoms (no sidechain). If you really want to show cartoon and backbone atoms at the same, use cartoon suppress false This is explained in the "cartoon" or "ribbon" command help. Just type command "help cartoon" to see your downloaded copy of the help page, or see the copy on our website here: <https://rbvi.ucsf.edu/chimerax/docs/user/commands/cartoon.html> The full name of the option is "suppressBackboneDisplay" but you can shorten all options in commands as long as there is no other option that starts with the same letters. Actually Chimera ribbon also hides backbone atoms by default, although you can allow showing both at the same time with the Chimera "ribbackbone" command. The best address to use for ChimeraX questions is the chimerax-users one that I CC'd on this message, unless you are including data that must be kept private. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Nov 13, 2023, at 2:59 PM, Firdous Tarique <kahkashantarique(a)gmail.com> wrote: > > Hi Elaine > > Now I know where the problem is. In ChimeraX I am not able to show Gly simultaneously as a stick and cartoon. If I am trying to show Gly as a stick then the cartoon line breaks up at this position. And this is for any structure if you see. By showing a cartoon and stick together, the sticks for all amino acids show up except for Gly where it remains in the cartoon (you can try that). However this is not the case in Pymol and Chimera. Do you know any tricks to fix that in ChimeraX? > > Best > > Firdous > > On Thu, Nov 9, 2023 at 6:11 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hello Firdous, > Probably the problem is that mol A and mol B are two different models. You can't add a bond in Chimera or ChimeraX until after combining them into one model first. > > ChimeraX combine command: > <https://rbvi.ucsf.edu/chimerax/docs/user/commands/combine.html> > > ChimeraX bond command or Build Structure tool, Adjust Bonds section: > <https://rbvi.ucsf.edu/chimerax/docs/user/commands/bond.html> > <https://rbvi.ucsf.edu/chimerax/docs/user/tools/buildstructure.html#bonds> > > For the best chance of getting an answer to a question about ChimeraX, please use the chimerax-users(a)cgl.ucsf.edu address: > <https://rbvi.ucsf.edu/chimerax/docs/contact.html> > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > > > > From: Collaborative Computational Project in Electron cryo-Microscopy <CCPEM(a)JISCMAIL.AC.UK> on behalf of Firdous Tarique <kahkashantarique(a)GMAIL.COM> > > Date: Thursday, November 9, 2023 at 12:27 PM > > To: CCPEM(a)JISCMAIL.AC.UK <CCPEM(a)JISCMAIL.AC.UK> > > Subject: [ccpem] Making thioester bond in Chimera/ChimeraX > > > > Hi > > > > Does anybody know how to make thioester bonds in Chimera or ChimeraX ? > > > > I am unable to make a bond between Cys321 in mol A with Gly1 in mol B (S-glycyl-L-cysteine) using Chimera or ChimeraX. > > > > I tried Isolde in ChimeraX and Build Structure in Chimera to make a bond between selected atoms but so far have been unsuccessful. I don't know if I am missing something. > > > > Any help would be appreciated. > > > > Thanks > > > > Firdous > > > > To unsubscribe from the CCPEM list, click the following link: > > https://www.jiscmail.ac.uk/cgi-bin/WA-JISC.exe?SUBED1=CCPEM&A=1 > > >

2 2

projecting full model from monomer
by Dmitry Semchonok 13 Nov '23

13 Nov '23

Dear colleagues, I have a monomer with biomt information that describes the full model. To see the full model, I use the command sym when opening the monomer in Chimera. Could you please prompt the correspondent command in ChimeraX to project the complete model in ChimeraX based on the information stored in the monomer? Thank you Kind regards, Dmitry

2 4

ChimeraX trial license
by Jang,Chang Woon,US-St. Louis 12 Nov '23

12 Nov '23

Dera UCSF ChimeraX Team, My name is Chang Woon Jang working for Nestle Purina. I am interested in ChimeraX for a molecular modeling project. Could I use a trial license for a month before buying the commercial license? Thanks, Chang Woon Jang

2 1

updating ChimeraX for rc/daily build with Isolde
by Dmitry Semchonok 11 Nov '23

11 Nov '23

Dear colleagues, I would like to update ChimeraX to rc version or daily build. Trying to install Isolde / Clipper delivered me the following error (either via the command line within ChimeraX, or via the ChimeraX update button) Clipper toolshed install C:/Users/Dmitry/Downloads/ChimeraX_Clipper-0.22.1-cp311-cp311-win_amd64.whl ERROR: Could not find a version that satisfies the requirement ChimeraX-Core<1.8,>=1.7.dev202306142048 (from chimerax-clipper) (from versions: none) ERROR: No matching distribution found for ChimeraX-Core<1.8,>=1.7.dev202306142048 ISOLDE toolshed install C:/Users/Dmitry/Downloads/ChimeraX_ISOLDE-1.7.dev0-cp311-cp311-win_amd64.whl ERROR: Could not find a version that satisfies the requirement ChimeraX-Core<1.8,>=1.7.dev202306142048 (from chimerax-isolde) (from versions: none) ERROR: No matching distribution found for ChimeraX-Core<1.8,>=1.7.dev202306142048 Is it possible to install Isolde/clipper with rc/daily version? If yes, how to fix the error? Thank you. Kind regards, Dmitry

2 1

Zooming in and out in ChimeraX
by Dale Calleja 09 Nov '23

09 Nov '23

Hello, I am currently learning to use ChimeraX (v1.6.1) and I am having issues with my scroll wheel. I notice when I first open the software using the scroll wheel on my mouse will zoom in and out of the structure but, after some time it simply stops working and the scroll wheel does nothing. Is this a button I am accidentally pressing or have I discovered a bug? It doesn’t seem to have any pattern, I am just clicking around changing the display of my protein. Thanks! Dale. Dale Calleja PhD Student, Komander Lab Ubiquitin Signalling Division WEHI 1G Royal Parade Parkville VIC 3052 Australia Email calleja.d(a)wehi.edu.au<mailto:calleja.d@wehi.edu.au> [WEHI Logo] Walter and Eliza Hall Institute of Medical Research 1G Royal Parade Parkville Victoria 3052 Australia www.wehi.edu.au<https://wehi.edu.au> Twitter<https://twitter.com/WEHI_research> | Facebook<https://www.facebook.com/WEHIresearch/> | Instagram<https://www.instagram.com/wehi_research> | Youtube<https://www.youtube.com/user/WEHImovies> | LinkedIn<https://www.linkedin.com/company/wehi_research> WEHI acknowledges the Wurundjeri people of the Kulin Nation as the traditional owners of the land where our campuses are located and the continuing connection to country and community. Private and confidential The content of this e-mail and any attachments may be private and confidential, intended only for use of the individual or entity named. If you are not the intended recipient of this message you must not read, forward, print, copy, disclose, use or store in any way the information this e-mail or any attachment contains. If you are not the intended recipient, please notify the sender immediately and delete or destroy all copies of this e-mail and any attachment.

2 2

ui mousemode right when in ISOLDE
by Alexis Rohou 09 Nov '23

09 Nov '23

Hi there, Wondering if anyone else gets this behavior: When ISOLDE is running, setting the right mouse click to translate selected atoms does NOT associate shift-right-click with rotating selected atoms; instead, shift-right click does a zoom. In addition, if I try to force it by issuing the two commands below, the shift right click still isn't a rotate selected atom; instead, it does a translate selected atoms. ui mousemode right "translate selected atoms" ui mousemode shift right "rotate selected atoms" My workaround is to use alt-right for rotating instead. That does work: ui mousemode right "translate selected atoms" ui mousemode alt right "rotate selected atoms" This is with ChimeraX 1.6.1, but I'm pretty sure I noticed this behavior in earlier versions also. Tristan recently posted a screen capture where it's clear he doesn't have this problem, but he's on Windows and I'm on Mac, so I wonder whether that might have something to do with it. Any ideas? Cheers, Alexis

3 5

how to build N-linked glycans
by Alexis Rohou 09 Nov '23

09 Nov '23

Hi there, How would you recommend I go about building an N-linked glycan chain off of an ASN in an existing model using ChimeraX or ISOLDE? Is there documentation on this somewhere? Cheers, Alexis

2 3

Custom calculation of forcefields for ligands in Isolde
by Paul Sauer 09 Nov '23

09 Nov '23

Dear ChimeraX and Isolde experts, I am trying to parameterize a ligand in Isolde 1.6 in order to fit it into my density. The ligand conforms to the requirements that are outlined in the manual (not covalently bound, only consists of certain elements, etc). However, parameterizing the residue using the inbuilt ANTECHAMBER/AMBER utility times out unfortunately, with an error saying that convergence in SCF cannot be reached. Upon investigating the issue I learned that it could be possible to avoid this error with adjusted command line parameters for AMBER in order to let it run longer for correct values. My question is: Is it possible to pass custom flags or command line arguments from Isolde to AMBER in ChimeraX? And if yes, how? The default command ‘Isolde parameterize residue’ does not seem to have any AMBER specific options. For example, how can I add 'adding ndiis_attempts=700’ (or other modifications) to my input sqm file? Thank you in advance, Paul

3 3