- ChimeraX-users - RBVI Mailing Lists

Save only the sequence that is present in the model
by Eric Pettersen 28 Jun '23

28 Jun '23

> Begin forwarded message: > > From: Vorländer,Matthias Kopano <matthias.vorlaender(a)imp.ac.at <mailto:matthias.vorlaender@imp.ac.at>> > Subject: Save only the sequence that is present in the model > Date: June 28, 2023 at 6:53:11 AM PDT > To: ChimeraX-users <chimerax-users-bounces(a)cgl.ucsf.edu <mailto:chimerax-users-bounces@cgl.ucsf.edu>> > > > Dear ChimeraX team, > > I would like to save only the sequence of a chain that is actually modelled. As I would like to do this for many files it would be great if this would work via scripting. Is this possible? > > Many thanks, > Matthias

3 3

Docking scores only as integers??
by thomas.wein＠lmu.de 28 Jun '23

28 Jun '23

Dear all, I'm reading glide Docking results into ChimeraX. In the ViewDockX table or charts the docking score is displayed only as integers. However, typical score valus are "-4.1234" or "-8.9876", I only see the "-4.000" etc. For the correct numbers I have to go into the original files which is somehow time consuming. Is there any possibility to get a "real" score value displayed? Thanks Thomas

2 1

Combining two volumes
by Tom Goddard 28 Jun '23

28 Jun '23

Tatiana writes: Dear ChimeraX developers, I would like your help to combine two volumes in ChimeraX while keeping the properties of each volume (colour, threshold...). I know it's borderline in ChimeraX, but it seems feasible. I have been playing with morph, vop commands and a lot of information found on the web for several days, but I fail. I'm also asking chapGPT... but I can't manage to combine my two volumes. Could you please help me to combine these two attached volumes. If yes, could you please send me the procedure And one more questions related to this question, How to know the name of the slider after vop morph command to synchronise 2 morph and record a movie. I found a way to do it on the web (via the Tools menu and selecting General Controls to open the General Controls panel. In the General Controls panel you will find various sliders) but I don't have this General Controls menu in ChimeraX. Thank you very much if you have time to help me. Tatiana

3 6

Re: [Chimera-users] Questions regarding reply log
by Elaine Meng 28 Jun '23

28 Jun '23

Hi Prathvi, Normally one would *not* include any residue numbers in a mmaker command. You only need model numbers (not chain IDs either, except if you want to make sure that specific chains match specific other chains when each model has more than one chain). Also it is completely useless to include the @ca in a mmaker command because mmaker always only uses @ca for proteins anyway. See the mmaker help for whichever program you are using (Chimera or ChimeraX). Your description does not make sense for Chimera. You must be using ChimeraX. The specifications are different for Chimera and ChimeraX, only ChimeraX uses "/" for chains. In either program, you would simply omit the chain part of the specification if there is no chain ID. To avoid confusing others, make sure to email chimerax-users if you are asking about ChimeraX usage, and chimera-users for Chimera. Thanks! Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Jun 28, 2023, at 1:47 AM, Prathvi Singh via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Thank you so much for the info Elaine! > I just have one more question. > Is it possible to run the "mmaker" command without inputting chain IDs of the residues to be superimposed? > I am asking this because I have a few PDB files whose residues lack chain ID information (I know this because when I hover my mouse over one of these residues, it shows something like: "/? PRO 190") > I tried the command: mmaker #0/?:162-172@CA to #1/?:162-172@CA > But it shows the error: No molecules/chains to match specified > > > > On Tue, Jun 27, 2023 at 9:46 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > Hi Prathvi, > Both of these things are much easier/better in ChimeraX, since it has commands to do them. We are recommending everybody use ChimeraX if possible (if it has the features that they need). > > In Chimera, the Reply Log has buttons to Clear and to Save, but there are no commands for those functions. If there were commands, it would be mentioned in the Reply Log help. > <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/reply.html> > > For saving only (not clearing), there are instructions of how to do it in python at the bottom of this page: > <https://www.rbvi.ucsf.edu/chimera/docs/ProgrammersGuide/basicPrimer.html> > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > > > On Jun 27, 2023, at 4:21 AM, Prathvi Singh via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > > > Hi Elaine, > > Is there a way to clear the Reply Log using the command line? > > Is there a way to write the contents of the Reply log to a text file? > > > > -- > > Prathvi Singh, > > Research Fellow, > > Department of Biological Sciences & Bioengineering, > > Indian Institute of Technology, Kanpur-208016 > > > > -- > Prathvi Singh, > Research Fellow, > Department of Biological Sciences & Bioengineering, > Indian Institute of Technology, Kanpur-208016 > _______________________________________________ > Chimera-users mailing list -- chimera-users(a)cgl.ucsf.edu: To unsubscribe send an email to chimera-users-leave(a)cgl.ucsf.edu > Manage subscription:

1 0

opening multiple csx files at same time
by stevensb＠ufl.edu 27 Jun '23

27 Jun '23

How can you open 2 or more csx files simultaneously in order to have the all contents of both *.csx files showing and superpositioned. This can be done for opening multiple *.pdb files which then shows all the chains of all the opened files superpositioned on the same page. But when I try to open multiple csx files, the second one completely deletes and replaces the currently open csx file and deletes what was showing from the originally open csx file.

2 1

Re: [Chimera-users] downloading and saving multiple PDB's
by Elaine Meng 26 Jun '23

26 Jun '23

Hi Dmitry, You sent this to the chimera-users list but chimerax-users(a)cgl.ucsf.edu (CC'd here) is the better address for ChimeraX questions. We try not confuse Chimera users with ChimeraX answers and vice versa. Since your text said "Chimerax" I will answer for ChimeraX. Not sure what you mean by "multiple" ... of course you can fetch structures from the PDB using their IDs, e.g. commands: open 1zik open 2gbp 2fw0 1plx 1plz <https://rbvi.ucsf.edu/chimerax/docs/user/commands/open.html#fetch> If by "multiple" you mean a huge number that is not practical to put in a single command, that is a different matter. Also, a single "save" command only saves one file and it does not have option to automatically figure out filename from model name. <https://rbvi.ucsf.edu/chimerax/docs/user/commands/save.html#pdb> However, ChimeraX does allow writing a single command script (.cxc file) and applying it to multiple input files when the .cxc file is opened with the "open" command and "forEachFile" option: <https://rbvi.ucsf.edu/chimerax/docs/user/commands/open.html#forEachFile> It also allows substituting part of the input file name as the output file name. However, it was intended for the case where all the input files are local files. So as far as I know you would have to first fetch all the files from the PDB so that they are in your local cache (~/Downloads/ChimeraX/PDB/ ) and then in a separate step, use your .cxc file with this forEachFile mechanism. To do so, you would probably also need to segragate these files into their own directory since you don't also want to run the script on all of the other structures you've previously fetched from the PDB using ChimeraX. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Jun 26, 2023, at 9:39 AM, Dmitry Semchonok via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Dear colleagues, > > Is there a way to > > • download the multiple pdb/mmcif using Chimerax knowing their ID entry? > • save multiple opened pdbs using their corresponding original names in Chimerax? > Thank you in advance. > > Kind regards, > Dmitry

3 6

Electrostatics
by Ryan Gardner 26 Jun '23

26 Jun '23

Hello, I just want to verify that the electrostatic potential is measured in volts (V). Is this correct? Here's an example of my analysis: [image: image.png] Sorry to be a bother! -Ryan

2 2

error opening Swissdock generated output file
by Fussner-Dupas, Eden 26 Jun '23

26 Jun '23

Hello, I am having trouble using ViewDockX with a file generated by Swissdock. When I open the clusters.dock4.pdb file it opens without issues - but when I try to use the ViewDockX tool to view each predicted pose one at a time I get the error “No suitable models found for ViewDockX” Any help warmly appreciated Cheers, Eden

2 2

Save Image Dialog box
by McClean, Phillip 25 Jun '23

25 Jun '23

Hi Everyone, I am using ver 1.6 of Chimerax. I want to save an image for print publication, so I want to save it as 300 dpi. I used the Snapshot icon from the toolbar and it saved a 72 dpi image. In the user guide, there is mention of a Save Image dialog. The guide sounds like I can make use the dialog to select the dpi. But, I cannot find the Save Image menu. Can someone point me to it and add any help/hints on save a 300 dpi image. As always, thanks for your help. Phil McClean

2 3

Aligning two ligands
by Karim Rafie 25 Jun '23

25 Jun '23

Hi all, I was wondering if there's a command that will allow me align two ligands to each other? Couldn't find anything online and when I try the match command I constantly run into an error, even when specifying certain atoms between two ligands. Any help would be greatly appreciated. All the best, Karim ############################################## Karim Rafie; PhD, MRSC Postdoctoral Research Fellow Carlson Lab Department of Medical Biochemistry and Biophysics Umeå University Umeå, Sweden [cid:e5366e3a-666f-40ea-9f71-eb5b2b395016]

2 2