- ChimeraX-users - RBVI Mailing Lists

Selecting atoms outside (or inside) a density map's contour
by Mateusz Dobrychłop 23 May '22

23 May '22

Dear ChimeraX Team, I'm a structural bioinformatician working on my PhD thesis. I've been a long time user of Chimera, and I'm now using ChimeraX to create figures for my dissertation. I genuinely love both programs. Thank you for creating them. I found myself stuck trying to perform one operation in ChimeraX that is very easy to perform in Chimera. What I'm trying to do is select (and color) all atoms of an atomic model, that are located outside of a density map's contour. In Chimera, I was able to just select the model and use the shortcut "ac oa" and that was it. Unfortunately I am not able to find a way to do that in ChimeraX. I even tried to select the atoms in Chimera, then save the selected atoms as a PDB file, and then the inverted selection as a separate PDB file, and then open the two files in ChimeraX and color them separately. This could even work for a full atom representation, but does not work well for ribbon representation. That said, if the solution to my problem could be to somehow transfer the list of atoms that are outside the map from Chimera to ChimeraX, that would work for me as well. I will appreciate any tips and suggestions! Kind regards, Mateusz

2 2

OpenGL woes on Windows
by Pranav Shah 21 May '22

21 May '22

Hi Team, I have installed the latest RC of chimerax on a windows box running v10 Pro. The box has an Nvidia RTX6000 GPU card as well. I have updated the Nvidia drivers to the latest version yet when I start ChimeraX, i see the following error message - ChimeraX requires OpenGL graphics version 3.3. Your computer graphics driver provided version 3.0 Try updating your graphics driver. Nvidia driver version - Version: R510 U6 (512.78) WHQL; Release Date: 2022.5.16; Operating System: Windows 10 64-bit, Windows 11 Do you guys have any suggestions for trouble shooting? Best, Pranav -- Pranav Shah Postdoctoral Research Fellow. Division of Structural Biology, Wellcome Trust Centre for Human Genetics, University of Oxford, Roosevelt Drive, Oxford OX3 7BN, UK

2 1

Problems with the first installation
by mykalxxxxx 20 May '22

20 May '22

Deer developer, This is my first time install ChimeraX. What should I do if I get this prompt after installation .Thanks. (QT 5.12.12 was already installed,windows 11,ChimeraX 1.4rc202205060510). | | mykalxxxxx | | 邮箱：mykalxxxxx(a)163.com |

2 1

Map "Blobs" tool - Generate objects?
by Ricardo Righetto 20 May '22

20 May '22

Hi again, Pardon for resurrecting another old thread: https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2020-May/001139.html I have needed to extract selected blobs as separate surfaces (and also separate volumes) recently and found a way to do it within ChimeraX version 1.3 (2021-12-08), here's how: 1. Right mouse → Blob → right click desired blob to color it (any color different from the rest of the volume) 2. Split the surface based on colors: sop splitbycolor #1.2 3. Use the desired split surface to mask the original volume data: vol mask #1 surf #2.2 fullMap true 4. Save as a new volume: save my_segmented_piece.mrc #3 Hope this helps :-) Best wishes, -- Ricardo Diogo Righetto

2 1

feature request : yellow/ochre clipping planes
by Pranav Shah 18 May '22

18 May '22

Hi Guys, Would it be possible to reinstate the same color scheme used to delineate the clipping planes in Chimera into ChimeraX. The current lines are too thin and have the same color as the default map color value. This makes the manipulation of the planes harder especially when working on a smaller screen. Best, Pranav -- Pranav Shah Postdoctoral Research Fellow. Division of Structural Biology, Wellcome Trust Centre for Human Genetics, University of Oxford, Roosevelt Drive, Oxford OX3 7BN, UK

2 1

Re: [chimerax-users] [Chimera-users] interface plot
by Elaine Meng 18 May '22

18 May '22

Oops, I meant to send this to chimerax-users(a)cgl.ucsf.edu , not chimera-users(a)cgl.ucsf.edu (apologies to the latter folks)! Elaine > On May 12, 2022, at 12:27 PM, Elaine Meng via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Hi Pranav, > If you mean that you wanted a list of the interface residues, you can use the "interfaces" network diagram edge context menu to select the residues, then list them in the Log with "info residues sel" ... and either cut-n-paste from the Log to text file or use "log save" to save it as an HTML file. The "info" command should really allow saving a text file directly, but it doesn't do that yet. I believe we have an open ticket to fix that omission. > > In the chain-chain network diagram, e.g. when the mouse cursor is over the edge representing the chain B-C interface, context-menu choices include > > Select Contact Residues of B and C > Select Contact Residues of B with C > Select Contact Residues of C with B > > <https://rbvi.ucsf.edu/chimerax/docs/user/commands/interfaces.html#diagram> > > Or if you get a new daily build, another way to select the residues is to use menu: Select... Contacts, the Chains section of the resulting dialog: > <https://rbvi.ucsf.edu/chimerax/docs/user/selectcontacts.html> > > Then use "info residues sel" and possibly "log save" as mentioned above. > <https://rbvi.ucsf.edu/chimerax/docs/user/commands/info.html#residues> > <https://rbvi.ucsf.edu/chimerax/docs/user/commands/log.html#save> > > Alternatively, you could use "measure buriedarea" specifying the two chains and "list true", which also reports each residue's buried area. (thus avoiding having to select and use "info") > <https://rbvi.ucsf.edu/chimerax/docs/user/commands/measure.html#buriedarea> > > Example: > measure buriedarea (/A&protein) with (/B&protein) list true > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > >> On May 12, 2022, at 9:06 AM, Pranav Shah <p.shah.lab(a)gmail.com> wrote: >> >> Indeed! Although, as a suggestion, would it be possible to highlight >> in the description that in order for the plot to inherit residue >> colors, one needs to invoke the plot _after_ the residues have been >> identified and colored? Also, could I save the output of the analysis >> to a text file? >> Best, >> Pranav >> -- >> Pranav Shah >> Postdoctoral Research Fellow. >> >> Division of Structural Biology, >> Wellcome Trust Centre for Human Genetics, >> University of Oxford, >> Roosevelt Drive, Oxford OX3 7BN, >> UK >> >> On Thu, May 12, 2022 at 4:53 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: >>> >>> haha, glad you like it!! >>> >>> Best, >>> Elaine >>> >>>> On May 12, 2022, at 8:27 AM, Pranav Shah via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu> wrote: >>>> >>>> <3 >>>> <3 >>>> <3 >>>> <3 >>>> <3 >>>> >>>> Best, >>>> Pranav >>>> -- >>>> Pranav Shah >>>> Postdoctoral Research Fellow. >>>> >>>> Division of Structural Biology, >>>> Wellcome Trust Centre for Human Genetics, >>>> University of Oxford, >>>> Roosevelt Drive, Oxford OX3 7BN, >>>> UK >>>> <image.png>_______________________________________________ >>>> ChimeraX-users mailing list >>>> ChimeraX-users(a)cgl.ucsf.edu >>>> Manage subscription: >>>> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users >>> > > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users

3 5

Re: [chimerax-users] exporting crosslinks histogram
by Tom Goddard 17 May '22

17 May '22

Hi Pim, I added a Save Plot As... menu entry to the crosslinks histogram, can save as svg or pdf or png. I also added bins, maxLength, minLength and height options to the command to control how many bins, the x scale and height of y scale (in counts per bin). These changes will be in tomorrow's ChimeraX daily build which will become ChimeraX 1.5 eventually. Too late to make it into ChimeraX 1.4. Tom > Dear ChimeraX team, > > I am analysing multiple datasets generated using crosslinking-ms, loaded as separate pseudobond files on my model. The crosslinks histogram plots works just fine and I’d now like to put some plots neatly side-by-side. My questions: > > - can the histogram be saved or exported? Ideally as an svg or pdf file. But png or jpg would also already be useful. > I could export the .pb files and plot them elsewhere, but that seems like a workaround. > > - is it possible to specify the x and the y axis of the generated histograms, as well as the bin size? This would be helpful to show them side-by-side. > > Many thanks in advance, > > Pim > -running v1.2.5 on mac os catalina 10.15-

1 0

Re: [chimerax-users] [Chimera-users] Set scale factors from displayed contours?
by Tom Goddard 17 May '22

17 May '22

Hi Oliver, In tomorrow's daily ChimeraX builds you can use volume maximum #1,2 scale fromlevels and it will scale each map by 1/level where level is the displayed surface level before taking the maximum. This allows merging maps that have different intensity levels. Thanks for the suggestion. This will be in ChimeraX 1.5 but not in 1.4 and is not in Chimera. Tom > On May 6, 2022, at 2:38 PM, Elaine Meng via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Hi Oli, > Oh, I see, you already figured out the scale factors (essentially) by adjusting thresholds interactively. So the automation would simply be doing the math of taking the ratio of the thresholds and scaling the map(s) according to that, which sounds more feasible. > > I can make a feature request ticket (probably ChimeraX), but can't make promises as I would not be the one to triage it. > Best, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > > >> On May 6, 2022, at 1:42 PM, Oliver Clarke via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: >> >> Hi Elaine, >> >> I don't think I explained very well - I mean to say, calculate the scale factors from the displayed thresholds. >> >> E.g. if the user has set map1 to a threshold of 1.0, and map2 to a threshold of 2.0, in order to make them visually equivalent in a combined map, map1 needs to be scaled by a factor of 2. >> >> It would be great if this could be done automatically as a flag for the volume or vop command (as there is already a flag to provide per map scale factors). >> >> Cheers >> Oli >> >>> On May 6, 2022, at 4:39 PM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: >>> >>> Hi Oli, >>> Our volume expert Tom is on vacation until mid-month and might not be reviewing questions for a while... so I will give my not-so-expert thoughts: >>> >>> To me, the initial identification of "overlapping bits" sounds quite subjective and thus difficult to encode. If the user could designate the boundaries of this area (by drawing a box?), perhaps automatic scaling of one map to make its values as similar as possible to the values of another map inside that box could be done. However, drawing the box would probably be just as time-consuming as the process that you are already using. >>> >>> Also, new developments/agorithms would be going only into ChimeraX, not Chimera. ChimeraX has mostly the same "vop" options as Chimera, except included in the "volume" command instead of "vop": >>> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/volume.html#vop> >>> >>> Best, >>> Elaine >>> ----- >>> Elaine C. Meng, Ph.D. >>> UCSF Chimera(X) team >>> Department of Pharmaceutical Chemistry >>> University of California, San Francisco >>> >>> >>>> On May 6, 2022, at 1:23 PM, Oliver Clarke via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: >>>> >>>> Hi, >>>> >>>> When combining maps using vop maximum (or volume maximum in chimerax), we often want to adjust the scale factors of the maps such that the overlapping bits of two aligned maps are visually on the same scale. It is possible to calculate the appropriate scale factors from the displayed thresholds, but this becomes a little time consuming when combining many maps. >>>> >>>> Would it be possible to add a flag, something like "get scalefactor from display thresholds" that would take care of this automatically? >>>> >>>> Cheers >>>> Oli >>> >> >> >> _______________________________________________ >> Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu >> Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users > > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users >

1 0

Removing text labels generated with command distance
by Shubham Devesh Ramgoolam 16 May '22

16 May '22

Hi, I hope you are doing well. I have a python script, to be executed in nogui mode, which does the following: -open a pdb file -define centroids for specific residues -draw pseudobonds between specific residues -> I am using the command distance for this purpose The issue arises when I have to save the session (.cxs) when in nogui mode, I am getting this error: QGuiApplication::font(): no QGuiApplication instance and no application font set. I believe it is because of the text labels created by the command distance. So, I included the following in my code: run(session, ‘hide #2.*’) and I can now save the session. I noticed in the model panel that the pdb file is assigned to #1 and the pseudobond to #2. The text labels are created as a submodel of the pseudobond (so #2.1, 2.2,..), hence why the ‘hide #2.*’ Will this fix always work? Is the model assignment also dependent on the pdb file being opened? Regards, Shubham Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

4 4

Where is the renumber sequence tool in ChimeraX?
by Phan, Isabelle 16 May '22

16 May '22

The sequence of my structure includes a tag and I want to renumber from -7 so that the first residue is the start Met. I tried the old chimera command resrenumber = FAIL. I googled and searched the docs, read the list of commands one by one, and still could not figure it out. The API has a renumber_sequence() function but I don't understand the description (what’s "the given residues”? The chain?) and was unable to find an example on how to call this from the interface. I opened the python shell and typed: from chimerax.core.commands import run run(renumber_residues('#1/A:*', -7)) # FAIL Sorry if this is trivial, I am still completely baffled by ChimeraX despite using it for years. Thanks, Isabelle CONFIDENTIALITY NOTICE: This e-mail, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

2 5