- ChimeraX-users - RBVI Mailing Lists

Blank lines in pseudobond files
by Tom Goddard 19 Feb '19

19 Feb '19

I made ChimeraX ignore blank lines and comment lines starting with “#” in pseudobond (.pb) files. Tom > On Feb 15, 2019, at 3:02 PM, Steve Chou wrote: > > Hi Elaine, > (1) I tried to read the pseudobonds from a file (.pb) , > ========================= > #1/A:13@NE2 #1/A:704@O > #1/A:13@NE2 #1/A:502@MG > #1/A:13@NE2 #1/A:501@PB > > #2/A:13@NE2 #2/A:704@O > #2/A:13@NE2 #2/A:502@MG > #2/A:13@NE2 #2/A:501@PB > ========================= > the program reported an error. > ============================= > ValueError: not enough values to unpack (expected 2, got 0) > File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/chimerax/read_pbonds/readpbonds.py", line 27, in read_pseudobond_file > aspec1, aspec2 = line.split()[:2] > See log for complete Python traceback. > ============================= > > (2) Then I tried to add distances on the ChimeraX terminal > ============================= > distance #1/A:13@NE2 #1/A:704@O > distance #1/A:13@NE2 #1/A:502@MG > distance #1/A:13@NE2 #1/A:501@PB > > distance #2/A:13@NE2 #2/A:704@O > distance #2/A:13@NE2 #2/A:502@MG > distance #2/A:13@NE2 #2/A:501@PB > ============================= > I was able to see the distance labels in the two structure. And I saw an new model (name: distances; ID:3) show up in the "Models" panels. Then I ran morphing again. The Mg and water molecules moved, but still didn't move together with the protein. > Steve > > On Fri, Feb 15, 2019 at 11:31 AM Elaine Meng <meng(a)cgl.ucsf.edu <mailto:meng@cgl.ucsf.edu>> wrote: > Hi Steve, > Yes, if those are the correct specifiers for atoms in your structure. You'd make a plain text file with name *.pb with lines like that and open it. > > You don’t have to read in pseudobonds from a file, however. If not too many, probably easier just to add distance monitors. > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html <http://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html>> > <http://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context <http://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context>> > > Elaine > > > On Feb 14, 2019, at 9:49 PM, Steve Chou <stevezchou(a)gmail.com <mailto:stevezchou@gmail.com>> wrote: > > > > Hi Elaine, > > Thanks for your detailed explanation! > > What's the format of the pseudobond file? Should it look like this? > > =============================== > > #1/A:13@NE2 #1/A:502@MG > > =============================== > > All the best, > > Steve > > > > On Thu, Feb 14, 2019 at 7:43 PM Elaine Meng <meng(a)cgl.ucsf.edu <mailto:meng@cgl.ucsf.edu>> wrote: > > Hi Steve, > > Actually I’m surprised the Mg and water were included (even if present at both ends) because I thought they had to be tethered by a bond or pseudobond (like a distance measurement) to the biopolymer chain, as described here under “Atoms in Common”: > > > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/morph.html#pairing <http://rbvi.ucsf.edu/chimerax/docs/user/commands/morph.html#pairing>> > > > > For the case where composition changes, you could add in a fake Mg ion and water to the structure that’s missing them, but you’d have to decide where to put them. Also it was my understanding that they had to be tethered to the biopolymer chain (e.g. add distance measurement, which can then be hidden), but maybe that requirement has changed, or the Mg does already have a metal-coordination pseudobond to the biopolymer. > > > > Or if you don’t care if the Mg or water move during the morph, you could just display those atoms from the original model (that was input to morphing) even though they are not present in the trajectory. > > Elaine > > ----- > > Elaine C. Meng, Ph.D. > > UCSF Chimera(X) team > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > > > > On Feb 14, 2019, at 12:51 PM, Steve Chou <stevezchou(a)gmail.com <mailto:stevezchou@gmail.com>> wrote: > > > > > > Thanks, Elaine! > > > You command "rainbow structures" works beautifully. > > > There is "a Mg ion" and "a water molecule" in the two conformations. > > > (1) If the two conformations have exactly the same compositions (by shifting the structure), the "Mg ion" and the "water molecule" do not follow the same path as the protein. They move but separate from the protein. > > > (2) If the two conformations have slightly different compositions, the "Mg ion" and the "water molecule" do not show up in the morphed pdb ensemble. > > > Is there a way to morph the specific components properly? > > > Steve > > > > > > > > > > > > > _______________________________________________ > > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > > Manage subscription: http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users <http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users> > > > > -- > Steve Chou > > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > Manage subscription: http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users <http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users>

1 0

Fwd: [Chimera-users] Can ChimeraX morph between two surfaces?
by Steve Chou 16 Feb '19

16 Feb '19

Hi Elaine, (1) I tried to read the pseudobonds from a file (.pb) , ========================= #1/A:13@NE2 #1/A:704@O #1/A:13@NE2 #1/A:502@MG #1/A:13@NE2 #1/A:501@PB #2/A:13@NE2 #2/A:704@O #2/A:13@NE2 #2/A:502@MG #2/A:13@NE2 #2/A:501@PB ========================= the program reported an error. ============================= ValueError: not enough values to unpack (expected 2, got 0) File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/chimerax/read_pbonds/readpbonds.py", line 27, in read_pseudobond_file aspec1, aspec2 = line.split()[:2] See log for complete Python traceback. ============================= (2) Then I tried to add distances on the ChimeraX terminal ============================= distance #1/A:13@NE2 #1/A:704@O distance #1/A:13@NE2 #1/A:502@MG distance #1/A:13@NE2 #1/A:501@PB distance #2/A:13@NE2 #2/A:704@O distance #2/A:13@NE2 #2/A:502@MG distance #2/A:13@NE2 #2/A:501@PB ============================= I was able to see the distance labels in the two structures. And I saw an new model (name: distances; ID:3) show up in the "Models" panels. Then I ran morphing again. The Mg and water molecules moved, but still didn't move together with the protein. Steve On Fri, Feb 15, 2019 at 11:31 AM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > Hi Steve, > Yes, if those are the correct specifiers for atoms in your structure. > You'd make a plain text file with name *.pb with lines like that and open > it. > > You don’t have to read in pseudobonds from a file, however. If not too > many, probably easier just to add distance monitors. > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html> > <http://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context> > > Elaine > > > On Feb 14, 2019, at 9:49 PM, Steve Chou <stevezchou(a)gmail.com> wrote: > > > > Hi Elaine, > > Thanks for your detailed explanation! > > What's the format of the pseudobond file? Should it look like this? > > =============================== > > #1/A:13@NE2 #1/A:502@MG > > =============================== > > All the best, > > Steve > > > > On Thu, Feb 14, 2019 at 7:43 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi Steve, > > Actually I’m surprised the Mg and water were included (even if present > at both ends) because I thought they had to be tethered by a bond or > pseudobond (like a distance measurement) to the biopolymer chain, as > described here under “Atoms in Common”: > > > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/morph.html#pairing> > > > > For the case where composition changes, you could add in a fake Mg ion > and water to the structure that’s missing them, but you’d have to decide > where to put them. Also it was my understanding that they had to be > tethered to the biopolymer chain (e.g. add distance measurement, which can > then be hidden), but maybe that requirement has changed, or the Mg does > already have a metal-coordination pseudobond to the biopolymer. > > > > Or if you don’t care if the Mg or water move during the morph, you could > just display those atoms from the original model (that was input to > morphing) even though they are not present in the trajectory. > > Elaine > > ----- > > Elaine C. Meng, Ph.D. > > UCSF Chimera(X) team > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > > > > On Feb 14, 2019, at 12:51 PM, Steve Chou <stevezchou(a)gmail.com> wrote: > > > > > > Thanks, Elaine! > > > You command "rainbow structures" works beautifully. > > > There is "a Mg ion" and "a water molecule" in the two conformations. > > > (1) If the two conformations have exactly the same compositions (by > shifting the structure), the "Mg ion" and the "water molecule" do not > follow the same path as the protein. They move but separate from the > protein. > > > (2) If the two conformations have slightly different compositions, the > "Mg ion" and the "water molecule" do not show up in the morphed pdb > ensemble. > > > Is there a way to morph the specific components properly? > > > Steve > > > > > > > > > > > > > _______________________________________________ > > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > > Manage subscription: > http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users > > -- Steve Chou -- Steve Chou

2 5

ChimeraX equivalent to ribinsidecolor
by Lukas Kater 15 Feb '19

15 Feb '19

Hi, is there a way to change the color of the inside of helices? Something like "ribinsidecolor" in chimera. see an example here (second picture from top): https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/ribstyles.html Thanks for any feedback! Lukas

2 1

Can ChimeraX morph between two surfaces?
by Steve Chou 14 Feb '19

14 Feb '19

Dear ChimeraX team, 1. Can ChimeraX morph between two surfaces (surfaces generated from two PDBs, not maps)? 2. During morphing, can the color also change gradually from one color (one conformation colored in red) to another color (another conformation colored in blue)? 3. The following command works if #1 has only one chain. morph #2 #1/L frames 10 When there are several chains in #1, ChimeraX stopped with an error (ValueError: models have different number of chains). Thanks in advance! Steve -- Steve Chou

2 5

bug report: hide with silhouettes
by Alexis Rohou 11 Feb '19

11 Feb '19

Hi Elaine, ChimeraX team, When silhouettes is set to true, hiding all models causes a bug whereby the display panel is not responsive / redrawn. As far as I can tell other parts of the GUI are still working. Below is a minimal reproducer. Attached are screenshots of what I'm seeing when silhouettes true (bug) or silhouettes false (no bug). I am running this on MacOS 10.13.6 on a MBP with graphics "Intel Iris Plus Graphics 650 1536MB" (sorry not sure what might be relevant here), and the Chimera version is: UCSF ChimeraX version: 0.8 date: 2018-12-17 22:26:30 UTC branch: v0.8 commit: 412d62d1949722ed7f52b3e515ec0f3b70b6b7af Python: 3.6.4 Obviously there's a workaround to avoid this but this caught me a few times in the last couple of days and it'd be nice to not have to watch out for it because the only solution I've found so far is to quit ChimeraX and start again. Cheers, Alexis PS. here's the reproducer: open pdb:1tbq set silhouettes true # Hide stuff hide #!1 models # Wait a bit (alternatively stop here and return to interactive use before doing the next step) wait 100 # print version out version verbose # Try to show it again. This should work (and does if silhouettes false) show #!1 models

3 4

volume zone - unexpected behavior when newMap false
by Alexis Rohou 11 Feb '19

11 Feb '19

Hello, I've been playing with volume zone and having good fun, but... I've noticed that if I set newMap to false, then the invert option is ignored (behavior is as though invert is false, even when I specify invert true). When newMap is set to true, or not set at all, the invert option has the effect I expected from reading the documentation. Am I missing something? Hopefully description above is unambiguous but let me know if you need step-by-step. Cheers, Alexis

3 4

Can ChimeraX add noise (Brownian-like motion) in morphing?
by Steve Chou 11 Feb '19

11 Feb '19

Dear ChimeraX support, When morphing from one structure to another unaligned structure, ChimeraX follows a smoothly curved path? Can it add noise (Brownian-like motion) to the path? All the best, Steve -- Steve Chou

2 3

equivalent to "move cofr"
by Alexis Rohou 08 Feb '19

08 Feb '19

Hello, Switching to ChimeraX, I find myself looking for an equivalent to "move cofr <https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/move.html#cofr>". Is there one? The use case is: I'm working on a particular part of a map & structure, I open a structure of a homologuous domain from the PDB, but its coordinates are way off, and I want to move it to the region I'm working on without having to zoom out and drag it. My apologies if this is in the documentation somewhere, I'm still finding my way around. Cheers, Alexis

2 2

Output motion prickle magnitude
by Scott, Brandon L. 08 Feb '19

08 Feb '19

Using the measure motion command I am able to generate the prickles on the surfaces correctly, which is great for visualization. Is it possible to write the magnitude of those prickles, and the index to a file so we can do further analysis on the distributions? Cheers, -Brandon ____________________ Brandon Scott, PhD SDSMT, Nanoscience

2 1

How to align two molecules using a subset of atoms in ChimeraX?
by Steve Chou 08 Feb '19

08 Feb '19

Dear ChimeraX support team, I tried the following command first - it worked well. ================== match #1/A to #2/A ================== Then I tried to align the two molecules using parts of them - it didn't work and complained that "No chains in reference structure PROT.pdb #2 compatible with BLOSUM-62 similarity matrix." ================== matchmaker #1/A:10-20@CA to #2/B:10-20@CA ================== System Info: ================== Platform: Linux-3.10.0-862.el7.x86_64-x86_64-with-redhat-7.5-Maipo ChimeraX version: 0.9 (2019-02-05) ================== Thank a bunch! Steven -- Steve Chou

2 3