- ChimeraX-users - RBVI Mailing Lists

Display sequence alignment from structure alignment
by James H Naismith 25 Nov '22

25 Nov '22

In Chimera I can sort of print out a sequence alignment based on structural superposition. (Match-align) I can make a very nice structural superposition of very unrelated proteins with matchmaker, all I want to do is print out the resulting sequence alignment (where residues are with y A of each other) Any help gratefully received. With best wishes Jim Division of Structural Biology, Roosevelt Drive, Oxford, OX3 7BN james.naismith(a)strubi.ox.ac.uk Pronouns: he, him, his

2 1

Opening .xyz file in ChimeraX
by Carina Luo 23 Nov '22

23 Nov '22

Hello, I am trying to open an .xyz file in ChimeraX. I installed SEQCROW (1.5.9) as prompted, but ChimeraX still says "Opener for format 'XYZ file' is not installed; see log for more info." Here is the output I got when I installed SEQCROW (1.5.9): Downloading bundle SEQCROW-1.5.9-py3-none-any.whl Errors may have occurred when running pip: pip standard error: --- [notice] A new release of pip available: 22.2.2 -> 22.3.1 [notice] To update, run: C:\Program Files\ChimeraX\bin\ChimeraX.exe -m pip install --upgrade pip --- pip standard output: --- Looking in indexes: https://pypi.org/simple, https://cxtoolshed.rbvi.ucsf.edu/pypi/ Processing c:\users\user\downloads\seqcrow-1.5.9-py3-none-any.whl Requirement already satisfied: jinja2 in c:\program files\chimerax\bin\lib\site-packages (from SEQCROW==1.5.9) (3.1.2) Collecting Send2Trash Downloading Send2Trash-1.8.0-py3-none-any.whl (18 kB) Requirement already satisfied: ChimeraX-Core<=1.5,>=1.2 in c:\program files\chimerax\bin\lib\site-packages (from SEQCROW==1.5.9) (1.5rc202210312311) Requirement already satisfied: scipy in c:\program files\chimerax\bin\lib\site-packages (from SEQCROW==1.5.9) (1.9.0) Requirement already satisfied: psutil in c:\program files\chimerax\bin\lib\site-packages (from SEQCROW==1.5.9) (5.9.1) Requirement already satisfied: MarkupSafe>=2.0 in c:\program files\chimerax\bin\lib\site-packages (from jinja2->SEQCROW==1.5.9) (2.1.1) Requirement already satisfied: numpy<1.25.0,>=1.18.5 in c:\program files\chimerax\bin\lib\site-packages (from scipy->SEQCROW==1.5.9) (1.23.1) Installing collected packages: Send2Trash, SEQCROW Successfully installed SEQCROW-1.5.9 Send2Trash-1.8.0 Could you please help me figure out what I still need to do in order to successfully open .xyz files in ChimeraX? Sincerely, Carina

3 3

How do you submit a sequence text file to BLAST/Modeller in ChimeraX?
by Ralph Loring 23 Nov '22

23 Nov '22

Hi, When I was using Chimera and wanted to use Modeller, I would go to sequence/Blast, paste in my sequence text file, Blast and then pick homologous structures and then connect to Modeller. Both Blast and Modeller appear to be present in ChimeraX, but I can't see how to enter my text file. Is everything supposed to go to AlphaFold now? Are there any tutorials on how to use Modeller in ChimeraX? Thanks! P.S. Hope you have a Happy Thanksgiving! I'm not planning on doing anything with this until after the holidays, so don't rush in answering. Ralph Lorini Ralph H. Loring Associate Professor of Pharmacology Department of Pharmaceutical Sciences 166 TF Northeastern University 360 Huntington Avenue Boston, MA 02115 USA 617-373-3216 office 617-373-8886 fax r.loring(a)northeastern.edu

2 3

Developing a ChimeraX bundle - accessing programmatically ChimeraX(GUI open) session
by Stylianos Iliadis 23 Nov '22

23 Nov '22

Hello, I would like to develop a small bundle-plugin for automatically annotating residue labels in protein structures. I tried to access ChimeraX via command line when ChimeraX was running (GUI open) with an opened protein structure in order to study the structure objects hierarchy( chain ->residue ->atoms). This would help me understand it better and code accordingly. Unfortunately, I didn’t manage to do so. Could you please suggest me a way, a page or terminal where I could read more about the internal structure of ChimeraX and if possible to programmatically access a session when it’s running in ChimeraX. Kind regards, Stel Iliadis

3 2

suggestion
by Hassan, Sergio (NIH/NIAID) [E] 22 Nov '22

22 Nov '22

Hello, I recently requested via Phil Cruz the 'tile' command, which I learned it was recently introduced. I have been using it successfully. However, there are two points I would like to bring to your attention (I asked Phil to ask you, but not sure he reached out) 1) when a session is saved as .cxs and I quit the program, after opening it again, the most important feature of the 'tile' command (rotations around each own axis) is lost. The tile distribution is still there, but now the entire thing rotates around a common axis. I need to apply 'tile' again to make it work, but this resets all the modifications I made in the saved session (these modifications include those in point 2 below). 2) any chance to add an argument to the 'tile' command so that the default spatial distribution, which assigns a 'distance' between near neighbors, can be adjusted with, say, 'zoom in" or "zoom out" or crowd in/out? I noticed the default puts each panel too far away from its neighbors for my taste, so I need to "move" them to make them look closer to one another. thanks s _____________________________________ Sergio A. Hassan https://bioinformatics.niaid.nih.gov/cmm/ BCBB/NIAID/NIH/DHHS 301 761 7221 (office) 301 741 5579 (mobile)

2 2

Re: [chimerax-users] Export pLDDT scores
by Tom Goddard 22 Nov '22

22 Nov '22

Hi Asmahan, The pLDDT scores for an AlphaFold prediction are in the bfactor column of the PDB atomic model file. Here is an example of lines from such a file where the value 85.53 is the pLDDT for residue 1. ATOM 1 N ASP B 1 -0.818 -36.026 -12.912 1.00 85.53 N ATOM 2 CA ASP B 1 0.545 -35.783 -13.373 1.00 85.53 C ATOM 3 C ASP B 1 0.706 -34.352 -13.882 1.00 85.53 C The bfactor is assigned to every atom. But pLDDT is only assigned for each residue and measures CA position so you might want to look at only the CA lines. $ grep CA ~/Downloads/ChimeraX/AlphaFold/prediction_14/af252_unrelaxed_rank_1_model_2.pdb ATOM 2 CA ASP B 1 0.545 -35.783 -13.373 1.00 85.53 C ATOM 10 CA CYS B 2 1.983 -32.130 -13.721 1.00 95.45 C ATOM 16 CA PRO B 3 3.029 -30.770 -17.151 1.00 93.20 C ATOM 23 CA SER B 4 6.629 -31.094 -18.066 1.00 93.36 C You can also write the values into a ChimeraX attribute file using ChimeraX commands select #1@CA save ~/Desktop/plddt.defattr attrName bfactor models #1 selectedOnly true and that file looks like the following attribute: bfactor recipient: atoms match mode: 1-to-1 /A:1@CA 56.150001525878906 /A:2@CA 53.33000183105469 /A:3@CA 53.59000015258789 /A:4@CA 59.380001068115234 documentation here https://www.cgl.ucsf.edu/chimerax/docs/user/commands/save.html#attributes Tom > On Nov 22, 2022, at 7:08 AM, Asmahan Alghamdi <Asmahan.Alghamdi(a)nottingham.ac.uk> wrote: > > Dear Tom, > I hope you are well. I was wondering if there is away to export pLDDT scores of the best predicted model of a protein using ChimeraX e.g. 1.5 (which I am using in my investigations)? > > Thank you very much. > Asmahan

1 0

Zoom over frames
by Krishnan Raman 21 Nov '22

21 Nov '22

Hi , Can I have the zoom command execute over several frames? Thanks Krish

2 4

Re: [chimerax-users] [Chimera-users] Coloring the unit cell box
by Elaine Meng 21 Nov '22

21 Nov '22

(switching to chimerax-users address since this is all about ChimeraX, not Chimera) Sorry no, there is no linewidth setting on the unit cell outline box. However, you can "fake it" by selecting that model so that there are green outlines to show the selection, and then changing the selection-outline color and width: (1) select the outline box model, e.g. as described in the previous message by checking the selection box in the Model Panel (2) use "graphics selection" command to change the selection-outline color and thickness <https://rbvi.ucsf.edu/chimerax/docs/user/commands/graphics.html#selection> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Nov 18, 2022, at 9:12 AM, F.Xavier Gomis-Rüth via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Thanks a lot, Elaine, this worked indeed! > Just one final point: how can I make the linewidth larger? When I make a picture, the thin lines of the box disappear. > I understand ChimeraX interpretes these lines as a surface, I can change the colour when choosing surface in the colour blow up. > > On 18/11/22 17:49, Elaine Meng wrote: >> Hi Xavier, >> As far as I can tell, it is exactly the same in ChimeraX as in Chimera. First, make sure you aren't using a very old version of ChimeraX. I tried it in ChimeraX 1.5 release candidate (2022-11-08) just now: >> >> - open your structure that has unit cell information, e.g. 1fav >> >> - in Unit Cell tool (menu: Tools... Higher-Order Structure... Unit Cell) click Outline to show unit cell box >> >> - if you want to change box outline color, can use the same method as described below for Chimera. I wasn't able to select it by Ctrl-click, however, so instead use the selection (hand with green dot) checkbox in the Model Panel to select it, then use Actions... Color... [...]. Or, you can just click the color square in the Model Panel and use the system color chooser to change the color interactively. Screenshot: >> >> <Screen Shot 2022-11-18 at 8.48.02 AM.png> >> >> >> I hope this helps, >> Elaine >> ----- >> Elaine C. Meng, Ph.D. >> UCSF Chimera(X) team >> Department of Pharmaceutical Chemistry >> University of California, San Francisco >> >> P.S. for ChimeraX questions specifically, you may want to use the other mailing list, chimerax-users(a)cgl.ucsf.edu >> >>> On Nov 18, 2022, at 7:03 AM, F.Xavier Gomis-Rüth via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: >>> >>> Dear Elaine, >>> I am now trying to get this done in ChimeraX where there is indeed a similar option. Unfortunately, if I proceed as in the instructions >>> I do not get the cell box, in contrast with old Chimera. I also tried through the command line but unsuccessfully. >>> Am I missing something? >>> Thanks a lot in advance, >>> Xavier >>> >>> On 26/10/22 17:45, Elaine Meng wrote: >>>> Hi Xavier, >>>> You can select the box (Ctrl-click on it) and then use menu: Actions... Color... [choose color], then clear selection by Ctrl-click on blank area of window or menu Select... Clear Selection. >>>> I hope this helps, >>>> Elaine >>>> ----- >>>> Elaine C. Meng, Ph.D. >>>> UCSF Chimera(X) team >>>> Department of Pharmaceutical Chemistry >>>> University of California, San Francisco >>>> >>>> >>>>> On Oct 26, 2022, at 1:56 AM, F.Xavier Gomis-Rüth via Chimera-users <chimera-users(a)cgl.ucsf.edu> >>>>> wrote: >>>>> >>>>> Dear all, >>>>> is there a way in Chimera or ChimeraX to get the unit-cell box being drawn in another colour than white? >>>>> This forces the background to be dark.... >>>>> Thanks a lot in advance, >>>>> Xavier >>>>> >>> >> > > -- > <fxgr_signanew.jpg> > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users

3 4

Re: [chimerax-users] [Chimera-users] Alphafold
by Tom Goddard 20 Nov '22

20 Nov '22

AlphaFold prediction is running fine in ChimeraX, just tested a monomer and heterodimer prediction in the ChimeraX release candidate. AlphaFold prediction is not available in the old Chimera software. You would have to give details such as the exact pasted error, the input you were running on, the ChimeraX version, and best to do that with ChimeraX menu Help / Report a Bug.... Tom > On Nov 19, 2022, at 11:38 PM, Kornelius Zeth via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Dear all – > > I’m using Alphafold in Chimera and I have a problem to run this properly on Colab. The people from Colab say that the error messages I get since recently are related to Alphafold developers having installed a new version. Could you please let me know what I could do to get the program running again? > > Thanks and have a nice day > > Kornelius > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users <https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users>

1 0

Chimerax Error
by Natalie Loui 20 Nov '22

20 Nov '22

Hi all, I’m trying to visualize a capsid by using the sym command but I keep getting this error ”Assembly "1" not found, have" If you have any advice, please let me know. Natalie Loui PhD Student | Skaggs Graduate School of Chemical and Biological Sciences Email: nloui(a)scripps.edu | Phone #: (808)221-8270 Scripps Research Institute | 130 Scripps Way, Jupiter, FL 33458 | https://education.scripps.edu

2 1