- ChimeraX-users - RBVI Mailing Lists

Re: [chimerax-users] Transparency with soft lighting
by Tom Goddard 10 Feb '23

10 Feb '23

Hi Scott, I made a ChimeraX recipe web page to show this transparency and shadows trick. https://rbvi.github.io/chimerax-recipes/shadows/shadows.html That's amazing Esther refound it in that long fitting video. Tom > On Feb 10, 2023, at 12:23 PM, Scott Stagg <sstagg(a)fsu.edu> wrote: > > Thanks, Tom. That’s exactly what I was looking for! Esther Bullit found the video. It’s this one > https://www.youtube.com/watch?v=v3jI43YJQMg > Fitting an atomic model in an electron microscopy map with ChimeraX > youtube.com > Scott > > >> On Feb 10, 2023, at 3:09 PM, Tom Goddard <goddard(a)sonic.net> wrote: >> >> Hi Scott, >> >> I'm not sure what video that is in. But there is some obscure ChimeraX magic involved. If you use the "soft" lighting (shadows cast from all directions) with a transparent surface it looks horrible because transparent surfaces by default don't cast shadows in ChimeraX. The reason for that default is often you are showing a molecule inside a transparent surface and then the molecule is dark (black actually) and hard to see. Because the transparent surface doesn't cast shadows it does not shadow itself so you don't get any of the darkened cavities that help 3D appearance. To make transparent surface cast shadows use ChimeraX command >> >> material transparentCastShadows true >> >> If you have an atomic structure (#2) inside the surface it will look black (shadowed), but you can tell it not to accept shadows >> >> lighting model #2 multishadow false >> >> The model inside can look pretty horrible and flat with soft lighting and you might try full lighting that adds a spot light, and also use silhouette edges. >> >> Here is an example of all these tricks. >> >> open 1080 from emdb >> light soft >> volume level 0.6 >> open 1grl >> preset cylinders >> fitmap #2 in #1 >> transparency #1 80 >> material transparentCastShadows true >> lighting model #2 multishadow false >> graphics silhouettes true >> set bgColor white >> light full >> >> Thanks for asking! >> >> Tom >> >> Opaque map, and transparent map, and transparent map with shadows with soft lighting. >> >> <image1.png><image2.png><image3.png> >> Atomic model is dark inside transparent map casting shadows. Can make atomic model not accept shadows. "Full" lighting instead of soft can make the atomic look less flat. >> >> <image4.png><image5.png><image6.png> >> >> >>> On Feb 10, 2023, at 6:48 AM, Scott Stagg via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu> wrote: >>> >>> Hi everybody, >>> >>> I’m writing because I saw in a YouTube video that you used “soft” lighting with transparency for an EM density map. It looked great. I can’t find the video again or the right documentation on how to do it. There was some command with the lighting that you typed in the command line. Do you know what I’m talking about? >>> >>> Thanks, >>> Scott >>> >>> Scott Stagg >>> Professor >>> >>> Institute of Molecular Biophysics >>> Department of Biological Sciences >>> Florida State University >>> Tallahassee, FL 32306-4380 >>> w: 850-645-7872 >>> f: 850-644-7244 >>> sstagg(a)fsu.edu >>> https://www.stagglab.com <https://urldefense.com/v3/__https://www.stagglab.com__;!!PhOWcWs!3QUvw8SGqe…> >>> >>> >>> >>> >>> _______________________________________________ >>> ChimeraX-users mailing list >>> ChimeraX-users(a)cgl.ucsf.edu >>> Manage subscription: >>> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users <https://urldefense.com/v3/__https://www.rbvi.ucsf.edu/mailman/listinfo/chim…> >> >

1 0

Transparency with soft lighting
by Scott Stagg 10 Feb '23

10 Feb '23

Hi everybody, I’m writing because I saw in a YouTube video that you used “soft” lighting with transparency for an EM density map. It looked great. I can’t find the video again or the right documentation on how to do it. There was some command with the lighting that you typed in the command line. Do you know what I’m talking about? Thanks, Scott Scott Stagg Professor Institute of Molecular Biophysics Department of Biological Sciences Florida State University Tallahassee, FL 32306-4380 w: 850-645-7872 f: 850-644-7244 sstagg(a)fsu.edu https://www.stagglab.com

3 2

About plotting independent component analysis vectors
by Tianming Qu 09 Feb '23

09 Feb '23

Dear all, Is there any way I can display the eigenvectors I got from the independent component analysis on ChimeraX, which is calculated from the protein MD trajectory. Best, Tianming

3 7

Show palette range scale
by Gomez Barillas, Andrea 08 Feb '23

08 Feb '23

Dear ChimeraX developers, I've mapped sequence conservation into my protein structure by defining a specific attribute and I colored it using a specific palette. I was wondering how I can show in my model the scale of colors for the range I've stablished in my map. Maybe there is a command I can use to show the range I used for mapping and what the colors represent. Thank you for your help, Andrea

2 1

Re: [chimerax-users] Help getting rmsd value per residue of 2 similar structures.
by Elaine Meng 08 Feb '23

08 Feb '23

Hi Binh, This is almost the same question as asked yesterday on chimerax-users(a)cgl.ucsf.edu, so I have the same answer: <https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2023-February/004923.html> That answer assumes you are using Matchmaker to superimpose these structures first, which has an option to display the pairwise sequence alignment with RMSD values per column, which can then be written out, used for coloring, etc, as detailed in that answer. Note that this RMSD is only using CA atoms so for two structures, it is simply the distance between the 2 CA atoms. You can use the Sequence Viewer settings to make it use the 4 backbone atoms per residue instead (N,CA,C,O): <https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2023-February/004923.html> Secondarily, remember that Chimera and ChimeraX are two different programs and if you are viewing help/answers for Chimera they may not pertain to ChimeraX. Finally, for the best chance of getting a good answer to ChimeraX questions in the future, please use chimerax-users(a)cgl.ucsf.edu unless you are including private data. Thanks! Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Feb 8, 2023, at 12:39 PM, Binh Nguyen <AnBinh.Nguyen(a)UTSouthwestern.edu> wrote: > > Dear Elaine, > > Is there a way to generate the rmsd per residue of 2 similar structures using chimeraX? I have searched through but I can only manage to get the overall RMSD. > > I have found this too but I have no idea how to get such information. > https://www.rbvi.ucsf.edu/pipermail/chimera-users/2019-February/015415.html > > Please help, thank you. > > B

2 1

Questions about MultiAlign Viewer
by Beate Aftret 06 Feb '23

06 Feb '23

Hi, I have some issues accessing the Multiaglin Viewer in ChimeraX. I’ve tried to look at this response: https://www.rbvi.ucsf.edu/pipermail/chimera-users/2019-February/015415.html . However, I’m unable to access it. I’m trying to access the multialign viewer so I can get individual RMSD values on structures compared using Matchmaker. Thank you in advance. Let me know if I need to give more detail. Kind regards, Beate Aftret

2 1

No Access to Personal Files
by Anna Popa 02 Feb '23

02 Feb '23

Good afternoon, I am a college student using your ChimeraX software to complete an assignment in my biochemistry course. I have downloaded your app to my HP Chromebook using the most recent Ubutun version. Despite being on my personal computer, ChimeraX cannot open the files needed from my computer. When I tried to find out why this is happening, I concluded that it might be a software issue because I wasn't even able to set up the ChimeraX app completely. I would greatly appreciate some guidance and assistance. Thank you, Anna Popa

2 1

Fwd: Your message to ChimeraX-users awaits moderator approval
by Eric Pettersen 02 Feb '23

02 Feb '23

> Begin forwarded message: > > From: Krishnan Raman > Subject: RE: Your message to ChimeraX-users awaits moderator approval > Date: February 2, 2023 at 9:47:12 AM PST > To: "chimerax-users-owner(a)cgl.ucsf.edu" <chimerax-users-owner(a)cgl.ucsf.edu> > > Hi guys > > is there a way to get structures + other numerical data into chimerax? > I get the structures using a sdf file. I want to get in someother data associated each structure. > > How to start multiple instances of chimerax from a html-commands file? > Thanks > Krish > CONFIDENTIALITY NOTICE > > This email, including any attachments, may contain confidential or legally privileged information that is intended only for the individual or entity to whom it is addressed. If you are not the intended recipient, please be advised that any dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please reply to the sender so that BioCryst Pharmaceuticals, Inc. can take corrective measures and then permanently delete this email and any attachment, including any printed copies. Thank you. >

3 5

Obtain electrostatic potential from PQR/DX via script
by Lohry, David 02 Feb '23

02 Feb '23

Hi everyone, I'm performing an analysis where I want to select different regions on a molecule and obtain a list of all of the electrostatic potentials from that region. My input is a PQR file with a DX file. These were generated from a PDB and APBS. The electrostatic potential can be viewed when the option "Report value at mouse position" is selected in the Surface Color tool (Tools...Volume Data...Surface Color...Options button) In the status bar at the bottom, it will show the value along with the coordinates. Is there a way to obtain this information via a ChimeraX command that I could script? Thank you!

3 3

Multi-chain single macromolecule .pdb file read as two molecules
by Lenye Dlamini 31 Jan '23

31 Jan '23

Hello, I have a homo-oligomeric model that I've refined using phenix and the ISOLDE tool in ChimeraX that's read during deposition as 2 separate molecules, a larger 14mer and a smaller tetramer. It's read as one molecule in Coot, Chimera and Pymol but read as two distinct molecules in ChimeraX exactly like the deposition. I found this curious and thought that perhaps you might have some idea of what's wrong with the file. There is nothing that appears obviously incorrect to me in the text of the .pdb file, all TER cards follow the chains and all amino acids and their identifiers are in sequence and correct. I'd appreciate any ideas you may have and I'm happy to send the file to you if you prefer. Thank you, Kind regards, Lenye Dlamini Disclaimer - University of Cape Town This email is subject to UCT policies and email disclaimer published on our website at http://www.uct.ac.za/main/email-disclaimer or obtainable from +27 21 650 9111. If this email is not related to the business of UCT, it is sent by the sender in an individual capacity. Please report security incidents or abuse via https://csirt.uct.ac.za/page/report-an-incident.php.

2 3