- ChimeraX-users - RBVI Mailing Lists

movie crossfade
by Enrico Martinez 27 Jan '25

27 Jan '25

Dear ChimeraX users! I am recording a short animation demonstrating my docking ensemble # start recording movie record ## play DOCKING movie from end to begining coordset #1 96,1,-1 wait 96 Would it be possible to add a smooth transition between each frame (docking pose) using the movie crossfade command ? If so, how should this command be placed in the script ? Many thanks in advance ! Enrico

3 13

Fwd: ChimeraX installation on Debian Trixie? (Unsatisfied dependencies)
by Eric Pettersen 27 Jan '25

27 Jan '25

Greg, I’m guessing this is yours… —Eric > Begin forwarded message: > > From: Eric Pettersen <pett(a)cgl.ucsf.edu> > Subject: Fwd: [chimerax-users] ChimeraX installation on Debian Trixie? (Unsatisfied dependencies) > Date: January 23, 2025 at 3:45:29 PM PST > To: chimerax-programmers(a)cgl.ucsf.edu > Cc: Elaine Meng <meng(a)cgl.ucsf.edu> > > Anybody? > >> Begin forwarded message: >> >> From: Francisco Murphy Pérez via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu> >> Subject: [chimerax-users] ChimeraX installation on Debian Trixie? (Unsatisfied dependencies) >> Date: January 19, 2025 at 1:22:00 PM PST >> To: ChimeraX Users Help <chimerax-users(a)cgl.ucsf.edu> >> Reply-To: Francisco Murphy Pérez <francisco.murphy(a)ibt.unam.mx> >> >> ``` >> root@debian# apt install ./ucsf-chimerax_1.9ubuntu24.04_amd64.deb >> Note, selecting 'ucsf-chimerax' instead of './ucsf-chimerax_1.9ubuntu24.04_amd64.deb' >> Some packages could not be installed. This may mean that you have >> requested an impossible situation or if you are using the unstable >> distribution that some required packages have not yet been created >> or been moved out of Incoming. >> The following information may help to resolve the situation: >> >> Unsatisfied dependencies: >> ucsf-chimerax : Depends: libgdk-pixbuf2.0-0 but it is not installable >> >> root@debian# apt install ./libgdk-pixbuf-2.0-0_2.42.12+dfsg-1+b1_amd64.deb >> Note, selecting 'libgdk-pixbuf-2.0-0' instead of './libgdk-pixbuf-2.0-0_2.42.12+dfsg-1+b1_amd64.deb' >> libgdk-pixbuf-2.0-0 is already the newest version (2.42.12+dfsg-1+b1). >> libgdk-pixbuf-2.0-0 set to manually installed. >> Summary: >> Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0 >> ``` >> >> From here https://github.com/RBVI/ChimeraX/blob/develop/mkubuntu.py (line 308) looks like "libgdk-pixbuf2.0-0": "2.40.0+dfsg", is missing a dash? >> >> >> _______________________________________________ >> ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu >> To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu >> Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/ >

1 0

ChimeraX question - Diana Mayorga
by Diana Carolina Mayorga Gonzalez 27 Jan '25

27 Jan '25

Hi, Hope you are well. I would like to know if I can do these transparent bubbles in ChimeraX showing the atoms stick as well. If it is possible, could you help me with a small tutorial, please? [cid:add7b0b3-f091-48a9-bc44-329473b06f2e] Thank you so much in advance, Diana Carolina Mayorga G PhD Student Yannick Doyon Lab Research Center - Université Laval Department of Reproduction, mother and youth health (RSME) Québec, Canada

2 1

Re: movie with model label/name
by Elaine Meng 26 Jan '25

26 Jan '25

Dear Saif, To ask questions in the future, we recommand that you please use the mailing list for the appropriate program (chimera-users(a)cgl.ucsf.edu <mailto:chimera-users@cgl.ucsf.edu> for Chimera, chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> for ChimeraX). If you mail me individually your question may not get answered. I will answer for ChimeraX since that is our preferred program now -- Chimera is no longer developed. In general, this topic is covered in the ChimeraX "making movies" page: <https://rbvi.ucsf.edu/chimerax/docs/user/movies.html> You can do all of this with a command script using several commands. There is a "morph" (atomic) or "morph maps" (density maps) command to do the morphing. You would probably change the display (colors, styles, etc.) to how you want it for your movie and then save a session. Then, to work on making a movie you would create a command script that applies to the session. The reason to save a session is so you can avoid redoing the same setup calculations, coloring, etc. every time you run the script. You can do all that stuff first and then save a session. Usually working on the script takes several days, so you would just restore your session and then continue working on the script. The script would contain what you actually want to show in the movie. You can play back an atomic morph with "coordset" and show/hide labels with "2dlabel" and you can do all kinds of other stuff as well, like zoom and rotate. You may also want to save positions in your session file (see "view" command) and then during the movie script, restore those different positions. When the movie script contains what you want to show in your movie, which is usually a long interative process after you play it back several times and keep changing the commands, then you would add the movie-recording commands (see "movie" command) to start recording at the beginning and save the movie file at the end. There are examples in our "making movies" page and links therein to the help for the commands mentioned above as well as movie-making tutorials. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Resource for Biocomputing, Visualization, and Informatics Department of Pharmaceutical Chemistry University of California, San Francisco > On Jan 26, 2025, at 5:53 AM, Md Saiful Islam - MRC LMB <sislam(a)mrc-lmb.cam.ac.uk> wrote: > > Dear Elaine > Just wondering, is there any script to make movies to show the conformational changes between multiple models with the labeling of each of the models shown. > For example, I want to make a movie to show a morph between three cryoEM models where I want to label the three models while morphing from model 1 to model 2 and from model 2 to model 3. > > Accept my apologies if you already shared this before. > > Many thanks for your help. > > Kind Regards > Saif

1 0

Confirming coordinate axis
by Abhinaba Das 24 Jan '25

24 Jan '25

Dear ChimeraX-users, I'm writing to ask if there is a way to view the x,y,and z axis live while model building. I've a helical map generated in CryoSPARC which has a D1 symmetry. I could generate the asymmetric unit (ASU) for the corresponding C1 reconstruction but having issues applying D1 symmetry. The approach I've taken is to make a diheral copy of the C1 ASU (turn y 180 center <mapId> coordinateSystem <mapId> model <modelid>; followed by combine command). This should generate the dihedral ASU, and if the helical symmetry is applied should generate the symmetric copies (?). But seems not to be working.. I've assumed that the dyad axis is along the y-axis (cryosparc says for its output map). Just wondering if the axes are aligned.. Thanks, Abhi

3 2

openmmforcefields
by Lewandowski, Jozef 24 Jan '25

24 Jan '25

Hi, I really like that openmm is implemented in ChimeraX. Is it possible somehow to implement/include openmmforcefields (https://github.com/openmm/openmmforcefields)? Specifically, I often use custom residues and would love to, e.g. parametrise them using GAFF, to do some small local minimisation in ChimeraX. Or is there any way of passing force fields for ligands parametrised with GAFF to ChimeraX? Thanks, Józef

3 2

Surface Color
by Hansen, Bryan (NIH/NIAID) [E] 24 Jan '25

24 Jan '25

Hi, I'm having issues with coloring a surface by volume. When I compare the two volumes I don't get the larger volume completely colored and even when I set 'Color outside volume' to match the same color as the 0 value which in this case is the blue it still renders grey. Can you help me with which step I'm messing up? Thanks. Bryan Hansen Computational Biologist / Electron Microscopist NIH/NIAID/RTB/RML/EMU Rocky Mountain Laboratories 903 S. 4th St Hamilton, MT 59840 406.363.9202 *********************************************************** The information in this e-mail and any of its attachments is confidential and may contain sensitive information.It should not be used by anyone who is not the original intended recipient. If you have received this e-mail in error, please inform the sender and delete it from your mailbox or any other storage devices. National Institute of Allergy and Infectious Diseases shall not accept liability for any statements made that are sender's own and not expressly made on behalf of the NIAID by one of its representatives. ***********************************************************

2 3

Assigning a custom net charge for a ligand using dockprep
by Jade Shi 24 Jan '25

24 Jan '25

Hi, I am trying to use dockprep to prepare PDB files with ligand molecules for subsequent modeling and analysis. I am currently using the "dockprep" command with no additional arguments. However, I find that occasionally when calculating partial charges using antechamber/AM1-BCC, ChimeraX assigns an incorrect total charge to the ligand resulting in an incorrect charge distribution. Is there a way to specify this manually, i.e. the equivalent of supplying the -nc flag when using antechamber directly? Thanks a lot! Jade

2 1

Draw and build secondary structures interactively
by Roden Deng Luo 22 Jan '25

22 Jan '25

Hi, I know there is a tool and command "build". But it is not that interactive. I wonder if there is a feature in ChimeraX (or any other tools) that can allow the user to draw in 3D space (or 2D) lines and then specify some segments as alpha-helices and some other segments as beta-sheets. I imagine the generated structure can be a backbone populated with G (glycine). Thanks, Roden -- This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email.

2 2

"forEach" command to open multiple pdb from multiple directories and save images there ?
by Vincent CHAPTAL 21 Jan '25

21 Jan '25

Hi, I would like to open multiple alphafold results that are stored in several folders, make an image, and save the image in those orignial folders. I'm using the forEach command to open all the results and run the script to create an image, and it works very well: open script.cxc forEach /PATH*/ranked_*.pdb script.cxc: open reference-structure.pdb match #1 to #2 color #*/B green color #*/C red color #*/D blue view matrix camera 0.87509,0.019021,-0.48356,-124.35,0.48393,-0.035333,0.87439,694.49,-0.00044561,-0.99919,-0.040123,163.41 I'm only stuck at the saving process where I'd like to save an image ranked_*.png matching the original name and folder location: save /PATH*/$file.png doesn't work because the /PATH*/ is not recognized as an existing directory. save /$PATH*/$file.png gives the same error. If I remove the /PATH/ it saves all the images on top of each other and it defeats the purpose. Could you let me know how to save in the folder where the .pdb was read from? Thank you Vincent -- Vincent Chaptal, PhD Director of GdR APPICOM Drug Resistance and Membrane Proteins Lab MMSB -UMR5086 7 passage du Vercors 69007 LYON FRANCE +33 4 37 65 29 01 http://www.appicom.cnrs.fr http://mmsb.cnrs.fr/en/

2 2