- ChimeraX-users - RBVI Mailing Lists

Protein-Protein Interaction Prediction
by Charity Conlin 20 Mar '25

20 Mar '25

Hello, I am trying to use ChimeraX to predict the interaction of 2 proteins using alphafold: Beta-Lactoglobulin and Lactoferrin. I have plugged the 2 protein sequences into the alphafold tool to try to predict the interaction, but I get a failure code in google colab. I am wondering how I can get around this? I think it is because the wrong versions of numpy and colab are installed during the program. Thanks, Charity [cid:b73a7660-3878-48cf-87d5-ddcd6ab388c2]

2 4

Poor performance on Ubuntu w/ discrete graphics vs basic b laptop
by ben 19 Mar '25

19 Mar '25

I'm looking for trouble shooting tips on poor graphics performance on linux. I have read through the FAQ's and done a basic search of the chimera list. Observed: Symptom: Prohibitively slow rendering when just rotating a map, especially if a model is loaded as well. When using Isolde (and presumably anything with clipper) performance is more "normal" as only a small portion of the map is displayed. System: This is observed on Ubuntu distros (both 20.04 22.04) with their respective Chimerax packages, tested versions 1.6.1 and 1.9. Nvidia drivers installed via the cuda toolkit (535.183.01 CUDA Version: 12.2 ) GPUs are either rtx 3090 or 4090s Point of reference: Performance is compared to my relatively very underpowered Windows thinkpad w/o discreet graphics. Thanks for any pointers to resources! Ben Sent with [Proton Mail](https://proton.me/mail/home) secure email.

2 3

Issue with crashing after mac upgrade to Sequoia
by Lee, Juliet A. 19 Mar '25

19 Mar '25

Hello! I recently updated my Mac (M2) to Sequoia 15.3.2, and I have had a specific issue in ChimeraX since then (though I cannot be 100% positive the two things are linked). Basically - whenever I try to save (anything) in ChimeraX, the application stops responding and I have to quit it. I downloaded the newest version 1.9 of ChimeraX as well as the daily build version - but this problem persists. I read about issues with the graphics driver - but these seem to be limited to Intel chips... Hoping you might have some insight as to why this is occurring, thank you!!! Sincerely, Juliet

3 7

secondary structures
by Bajaj, Ruchika 18 Mar '25

18 Mar '25

Hi I want to determine helices and betasheet and their ranges in a structure. Could you please let me know which command and its usage I can use to get it. Please let me know. Thanks !! Regards Ruchika

2 2

Request for Review of Figure 12 instructions
by Zeenat Bashir 18 Mar '25

18 Mar '25

Dear ChimeraX Developers, I hope this email finds you well! I am developing a hands-on module for students using ChimeraX, and I want to express my appreciation for this powerful and beautifully designed tool. I would like to request a review of the instructions on page 11 for generating Figure 12. I have successfully generated this figure before and am now attempting to do so using ChimeraX. However, I would appreciate your guidance to ensure the accuracy and clarity of the instructions (I have highlighted it in red) Thank you for your time and support! I look forward to your feedback. Best Regards, Zeenat -- *Dr. Zeenat Bashir* *Senior Lecturer* *Biotechnology Lab Coordinator* *Department of Chemical and Biomolecular Engineering* *University of Pennsylvania* *310 Towne Building* *220 S. 33rd Street* *Philadelphia, 19104 -6393* bashirz(a)seas.upenn.edu

1 1

sybyl vs amber atom types in ChimeraX
by laurene.jacquot 17 Mar '25

17 Mar '25

Dear ChimeraX community, I hope this message finds you well. I am a master student currently working on a project where I need to generate a mol2 file with amber atom types for a protein. Chimera does not manage to parametrize my protein at all, which is why I switched to ChimeraX. ChimeraX does manage to generate a mol2 file, but it writes sybyl atom types. Despite looking on forums, I have not found a feature like in Chimera to write amber atom types instead. I was wondering if such a feature exists in ChimeraX ? Thanks in advance, Best, Laurène Jacquot PSL University, ChimieParisTech

4 3

Automating the process of data generation via ChimeraX
by mishra.ananya.163＠gmail.com 17 Mar '25

17 Mar '25

Dear Sir/Madam, I am an undergraduate student working on a project and I am trying to generate values for the solvent accessible surface area, mean molecular lipophilicity potential and mean surface electrostatic potential for a dataset involving protein 3D structures (in pdb format). We also plan to introduce point mutations via ChimeraX using the swapaa command and measure the same values for the mutated proteins. As such, we were wondering if there is a way to automate this process of generating the values for each protein, without having to manually do it. We tried to test out some code to see if it is possible to run a python file in ChimeraX. This was the code we wrote: import chimerax import csv import os from chimerax.core.commands import run run(session, "open" + r'C:\Users\anany\Downloads\Research\Test_PDB_Passenger\P35579_MYH9.pdb') run(session, "color red") run("surf") However, we received this error message: openC:\Users\anany\Downloads\Research\Test_PDB_Passenger\P35579_MYH9.pdb Traceback (most recent call last): File "C:\Users\anany\Downloads\Research\Test_PDB_Passenger\test_import.py", line 6, in <module> run(session, "open" + r'C:\Users\anany\Downloads\Research\Test_PDB_Passenger\P35579_MYH9.pdb') File "C:\Program Files\ChimeraX 1.8\bin\Lib\site-packages\chimerax\core\commands\run.py", line 49, in run results = command.run(text, log=log, return_json=return_json) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Program Files\ChimeraX 1.8\bin\Lib\site-packages\chimerax\core\commands\cli.py", line 3156, in run raise UserError(self._error) chimerax.core.errors.UserError: Unknown command: openC:\Users\anany\Downloads\Research\Test_PDB_Passenger\P35579_MYH9.pdb Error opening python file C:\Users\anany\Downloads\Research\Test_PDB_Passenger\test_import.py We would appreciate your kind assistance! Thank you!

4 6

Feature request alphafold: return selection when dragging in PAE plot
by Vorländer,Matthias Kopano 17 Mar '25

17 Mar '25

Dear ChimeraX team, I love the alphafold tools in ChimeraX, and have a small suggestion to make it even better. Currently, when associating a PAE plot from a JSON file, you can drag the mouse in the PAE plot to color the corresponding residues (magenta and lime), but the residues do not become selected (although the color command gets printed in the log). I think it would be helpful if there was an option (or default behavior) to return a selection in addition, so that the selected region could be saved as a named selection, the display style changed ect… Or am I missing anything? Many thanks in advance, Matthias

2 1

Fwd: Re: coloring surfaces by electrostatic potential from different atoms
by Boaz Shaanan 16 Mar '25

16 Mar '25

Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben Gurion University Beer Sheva, Israel ---------- Forwarded message ---------- From: Boaz Shaanan <bshaanan(a)bgu.ac.il> Date: Mar 16, 2025 18:32 Subject: Re: coloring surfaces by electrostatic potential from different atoms To: ChimeraX Users Help <chimerax-users(a)cgl.ucsf.edu> Cc: Hi Elaine, Thank you so much for the prompt an informative reply. The points about the offset and dielectric are very relevant. In fact, in a quick test that I ran before posing the question I noticed that the coloring of the electrostatic potential on the cofactor was quie dim, probably because of those parameters. I'll also look into the MOLE and pseudo atom coloring. Thanks again. Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben Gurion University Beer Sheva, Israel On Mar 16, 2025 17:50, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: Hi Boaz, I changed the subject line to try to describe this topic. We aren't the APBS experts but my understanding is that yes, it will generate potential at all points in the rectangular grid, based on the input atoms charges and locations. There will of course be potential values even at grid points where there are no atoms, since electrostatics are fairly long-range interactions. However, the magnitude will depend on what dielectric parameters you have given the calculation. Whether it makes sense: that is somewhat up to your scientific judgement. In my opinion, yes, it makes sense, but you have to think carefully about the "offset" you use to color the cofactor surface. Normally when the surface is on the same atoms that produced the charge, you use a positive offset (default 1.4) to color by values projected that distance outward from the surface, to represent what other outside atoms might "see". If you are coloring a surface of the cofactor atoms to try to understand the potential from the protein that the cofactor "sees," you should consider instead using a negative (say -1.4) or zero offset. The offset is adjustable in the Surface Color dialog options and the "color electrostatic" command: <https://protect.checkpoint.com/v2/r02/___https://rbvi.ucsf.edu/chimerax/doc…> <https://protect.checkpoint.com/v2/r02/___https://rbvi.ucsf.edu/chimerax/doc…> Note that an analogous procedure could be done in ChimeraX with the Coulombic electrostatic potential. For example, see the MOLE channels tutorial where we calculate the Coulombic potential from the protein but then show a surface on pseudoatoms representing a channel calculated by MOLEonline, and then color that channel surface by the protein potential. <https://protect.checkpoint.com/v2/r02/___https://www.rbvi.ucsf.edu/chimerax…> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Resource for Biocomputing, Visualization, and Informatics Department of Pharmaceutical Chemistry University of California, San Francisco > On Mar 15, 2025, at 10:30 AM, Boaz Shaanan via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu> wrote: > > Hi friends, > On a related issue: > I'd like to explore the effect of replacing Val by Asp on the electrostatic potential 'seen' by a cofactor which is completely surrounded by the protein (this is relevant for understanding the change in reaction rate following such replacement). I thought of the following steps: > > • Omit the cofactor from the pdb2pqr and APBS. > • Read into chimerax the complete pdb (i.e. including the cofactor). > • Generate the surfaces (protein and cofactor). > • Render the electrostatic potential on both surfaces (i.e. Cofactor and protein surrounding it) and probe the potential on the cofactor. > • Does it make sense? Does APBS generate potential values in the void where the cofactor resides even though it wasn't present in the input pdb2pqr (i.e. in the void where the cofactor resides). > I'd appreciate your input. > Boaz >

1 0

Re: ChimeraX-users Digest, Vol 99, Issue 28
by Boaz Shaanan 16 Mar '25

16 Mar '25

Hi friends, On a related issue: I'd like to explore the effect of replacing Val by Asp on the electrostatic potential 'seen' by a cofactor which is completely surrounded by the protein (this is relevant for understanding the change in reaction rate following such replacement). I thought of the following steps: 1. Omit the cofactor from the pdb2pqr and APBS. 2. Read into chimerax the complete pdb (i.e. including the cofactor). 3. Generate the surfaces (protein and cofactor). 4. Render the electrostatic potential on both surfaces (i.e. Cofactor and protein surrounding it) and probe the potential on the cofactor. 5. Does it make sense? Does APBS generate potential values in the void where the cofactor resides even though it wasn't present in the input pdb2pqr (i.e. in the void where the cofactor resides). I'd appreciate your input. Boaz Boaz Shaanan, Ph.D. Dept. of Life Sciences Ben-Gurion University of the Negev Beer-Sheva 84105 Israel E-mail: bshaanan(a)bgu.ac.il ________________________________ From: chimerax-users-request(a)cgl.ucsf.edu <chimerax-users-request(a)cgl.ucsf.edu> Sent: Friday, 14 March 2025 21:00 To: chimerax-users(a)cgl.ucsf.edu <chimerax-users(a)cgl.ucsf.edu> Subject: ChimeraX-users Digest, Vol 99, Issue 28 Send ChimeraX-users mailing list submissions to chimerax-users(a)cgl.ucsf.edu To subscribe or unsubscribe via email, send a message with subject or body 'help' to chimerax-users-request(a)cgl.ucsf.edu You can reach the person managing the list at chimerax-users-owner(a)cgl.ucsf.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of ChimeraX-users digest..." Today's Topics: 1. sybyl vs amber atom types in ChimeraX (laurene.jacquot) 2. Re: sybyl vs amber atom types in ChimeraX (David A Case) ---------------------------------------------------------------------- Message: 1 Date: Fri, 14 Mar 2025 09:47:39 +0000 From: "laurene.jacquot" <laurene.jacquot(a)etu.chimieparistech.psl.eu> Subject: [chimerax-users] sybyl vs amber atom types in ChimeraX To: "chimerax-users(a)cgl.ucsf.edu" <chimerax-users(a)cgl.ucsf.edu> Message-ID: <MR1P264MB2612AFE1D7D6BEF80D0B069A92D22(a)MR1P264MB2612.FRA P264.PROD.OUTLOOK.COM> Content-Type: multipart/alternative; boundary="_000_MR1P264MB2612AF E1D7D6BEF80D0B069A92D22MR1P264MB2612FRAP_" Dear ChimeraX community, I hope this message finds you well. I am a master student currently working on a project where I need to generate a mol2 file with amber atom types for a protein. Chimera does not manage to parametrize my protein at all, which is why I switched to ChimeraX. ChimeraX does manage to generate a mol2 file, but it writes sybyl atom types. Despite looking on forums, I have not found a feature like in Chimera to write amber atom types instead. I was wondering if such a feature exists in ChimeraX ? Thanks in advance, Best, Laurène Jacquot PSL University, ChimieParisTech -------------- next part -------------- A message part incompatible with plain text digests has been removed ... Name: not available Type: text/html Size: 3823 bytes Desc: not available ------------------------------ Message: 2 Date: Fri, 14 Mar 2025 09:08:36 -0600 From: David A Case <dacase1(a)gmail.com> Subject: [chimerax-users] Re: sybyl vs amber atom types in ChimeraX To: "laurene.jacquot" <laurene.jacquot(a)etu.chimieparistech.psl.eu>, chimerax-users(a)cgl.ucsf.edu Message-ID: <20250314150836.x2iskz4ufcygpsqt(a)pop-os.localdomain> Content-Type: text/plain; charset=us-ascii; format=flowed On Fri, Mar 14, 2025, laurene.jacquot via ChimeraX-users wrote: > >I am a master student currently working on a project where I need to >generate a mol2 file with amber atom types for a protein. I don't have a ChimeraX answer here, but rather a question: why do you need a protein mol2 file with Amber atom types? Amber workflows would not create a mol2 file for an entire protein; but of course, you may need such a file for some other purpose. If so, we may be able to find some Amber tools that does this (or avoids needing it), if the ChimeraX folks themselves don't have a solution. ....dave case ------------------------------ Subject: Digest Footer _______________________________________________ ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu Archives: https://protect.checkpoint.com/v2/r02/___https://mail.cgl.ucsf.edu/mailman/… ------------------------------ End of ChimeraX-users Digest, Vol 99, Issue 28 **********************************************

2 1