- ChimeraX-users - RBVI Mailing Lists

Where is the renumber sequence tool in ChimeraX?
by Phan, Isabelle 16 May '22

16 May '22

The sequence of my structure includes a tag and I want to renumber from -7 so that the first residue is the start Met. I tried the old chimera command resrenumber = FAIL. I googled and searched the docs, read the list of commands one by one, and still could not figure it out. The API has a renumber_sequence() function but I don't understand the description (what’s "the given residues”? The chain?) and was unable to find an example on how to call this from the interface. I opened the python shell and typed: from chimerax.core.commands import run run(renumber_residues('#1/A:*', -7)) # FAIL Sorry if this is trivial, I am still completely baffled by ChimeraX despite using it for years. Thanks, Isabelle CONFIDENTIALITY NOTICE: This e-mail, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

2 5

align 400 copies of the same density map into a circle
by SHIQING LIAO 16 May '22

16 May '22

Hi there, I am a new user and would really appreciate any input on the task I want to do using Chimerax. Currently I have a mrc map, and it is a part of a cylindrical tube-shaped structure (like the area I drew in the picture). The map looks like a curved plane from the side of the cylinder, if it helps. If I piece 400 identical copies of map with some rotation and transition, I would ideally get a cynlider shaped strutcure, without top and bottom (like the picture below). The reason why I want to piece the mrc together is that I don't have the full look of the tube, but I know the rough radius (that's how 400 was derived), and I want to make a model for the full tube, using the model of the composing protein. I managed to manually fit the models of individual protein into one map. For the other mrc copies, I tried to do the same again but it took a lot of time and not very accurate, so I'm looking for any coding solutions that might help. I'm currently thinking if it is possible for me to place a marker at the center of one mrc map. Then make 400 copies of the map with the marker. Then write a code to tell each 1/400 mrc map to rotate 0.9 degrees around the marked center and move to a coordinate. Then I can repeat the same for the protein models I mapped to one mrc map. But I have no idea how to achieve it, and any suggestions would be greatly appreciated! Thank you so much for helping me!!! Best, Shiqing [image: cf23fde5-632f-4568-9700-9307f24e0f6c.png]

2 1

crossfade issue
by Omid Haji-Ghassemi 16 May '22

16 May '22

Dear ChimeraX community, I am having some issues with the crossfade command while making a movie. For some reason the command stretches out the image while running the transition. I am just doing a simple transition for a movie as part of a more complicated movie. To illustrate the problem I made a simple script that reproduces the issue. movie record supersample 3 size 640,480 wait 60 crossfade; cartoon hide #1/D-F; wait 60 movie encode framerate 60 output test.mov Be great if someone can let me know what I am doing wrong. Best, Omid --------------------------------------------------- --------------------------------------------------- Dr. Omid Haji-Ghassemi Assistant Professor, Biological Sciences Department University of Calgary https://hajighassemilab.org

3 4

Re: [chimerax-users] [Chimera-users] Making a movie from map series while keeping map's colors
by Elaine Meng 16 May '22

16 May '22

Hi Michal, Since this is a ChimeraX question I'm putting it on chimerax-users(a)cgl.ucsf.edu -- otherwise the Chimera users will be confused! In the future you may want to use that address for ChimeraX questions. If I remember correctly, "vseries" re-renders the surfaces at the time of playback, unless you specify storing more of them with the "cacheFrames" option -- so try using "vseries" with "cacheFrames 20": <https://rbvi.ucsf.edu/chimerax/docs/user/commands/vseries.html> See previous answer to a similar question: <https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2022-February/003271.html> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On May 16, 2022, at 12:45 AM, Michal Arie Shmuelov via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Hi everyone, > I have 20 maps (from 3D variability analysis) that I open as series in chimeraX. > I’m coloring the map series using the command “color zone #X near #X distance X” (coloring the map according to pdb model). > Next I’m trying to make a movie of this map series while retaining the map colors. > For some reason when the morph/ vseries starts to run the colors disappear. > Can someone help me to solve this problem? > What are the commands that I should write? > Thanks, > Michal >

2 1

Python code for obtaining chain information
by Shubham Devesh Ramgoolam 16 May '22

16 May '22

Hi, I hope you are doing well. I have a python script in which I need generate a list of all the chains present in a structure: e.g [A,B] However, I do not know which module to import in order to write a code for this. Regards, Shubham Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

2 1

Showing Bond/PBond to Cartoon/Ribbons
by Anderson, Jacob 13 May '22

13 May '22

There has been a prior post on this problem, but I wanted to ask about some asymmetry I see in ChimeraX when displaying residues emanating from ribbons/cartoons. https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2021-October/002850.html For example, sometimes when I select a residue on a ribbon/cartoon and write "show sel atoms,bonds", I get a floating residue. However, other times I get a nice connection between the beta carbon and the ribbon (the desired behavior). How can users get a consistent behavior where there is a connection from the beta carbon to the ribbon? Good Example - connected to ribbon [cid:6ddcc2ee-f9b2-4060-8e3f-fde8ccc74881] Two floating examples: [cid:46516984-036d-4a39-9713-9056a161548a]

3 6

no gui mode and redirecting output of some commands
by Shubham Devesh Ramgoolam 12 May '22

12 May '22

Hi, I hope you are doing well. I have a python script (myscript.py) as follows: from chimerax.core.commands import run import os os.chdir("C:\\Users\\Shubham\\Desktop") run(session, "open C:\\Users\\Shubham\\Desktop\\PDB_Script\\1ebt.pdb") # location of my pdb file run(session, "sel aromatic & protein") run(session, "log clear") run (session, "info residue sel") run(session, "log save aromatic_list.html") I am using the following prompt for calling chimerax from command prompt: Gui enabled: chimerax --script C:\\Users\\Shubham\\Desktop\\myscript.py Gui disabled: chimerax --nogui --script C:\\Users\\Shubham\\Desktop\\myscript.py With gui mode enabled, the html file, aromatic_list.html, is created. However, when disabling gui, nothing is created. I suspect this is because I am relying on the log which may not be functional when gui is disabled? Is there a way of redirecting the output of certain commands (e.g info, distance, angle) to a desired text file when disabling gui? I tried with sys.stdout but it did not work (empty text files were created.). Regards, Shubham Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

2 6

interface plot
by Pranav Shah 12 May '22

12 May '22

<3 <3 <3 <3 <3 Best, Pranav -- Pranav Shah Postdoctoral Research Fellow. Division of Structural Biology, Wellcome Trust Centre for Human Genetics, University of Oxford, Roosevelt Drive, Oxford OX3 7BN, UK

2 1

Cartoon “Highlight color” and “Suppress false” Feature
by Gupta, Arun 12 May '22

12 May '22

Hello ChimeraX team, I am just wondering whether the “Pymol Cartoon highlight color” feature of helix and strand has been brought in the newer or the daily build versions of the ChimeraX. Someone has been just recently verbally referring to me that this feature has been updated in the newer versions of ChimeraX, but I couldn’t locate the mention in the ChimeraX mailing list. Also, I have noticed that “cartoon suppress false” command doesn’t work for the NMR ensemble PDBs I think it's more to do with specifying the “cartoon suppress false” command for the individual PDB model within ensemble PDBs. I did try to play around with selection notation for individual model with “cartoon suppress false” command but couldn’t get it right. Can you please specify the exact command notation to work around with NMR ensemble PDBs Thanks! Arun Arun Gupta PhD, MRSC Research Fellow Challis & Lewandowski Group Chemistry Department University of Warwick Gibbet Hill Road Coventry CV4 7AL United Kingdom

2 3

Model number of geometric objects(axes, planes)
by Shubham Devesh Ramgoolam 11 May '22

11 May '22

Hi, I hope you are doing well. I am writing a python script to do the following: 1. Define planes and axes 2. Measure the angle between specific planes and between specific plane and axis The issue I am facing is that I need the model number of these geometric objects when using the command angle. Is there a command that will give the model number of the geometric objects? (In chimera, I would assign a number to the geometric objects when defining them and I would refer to it in the command angle. In chimeraX, I could assign a name to the geometric object but the command angle accept only model number for axes and planes.) Regards, Shubham Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows

2 2