- ChimeraX-users - RBVI Mailing Lists

Color key
by Ricardo Righetto 18 Nov '19

18 Nov '19

Hi, Apologies if this has already been asked or documented somewhere, but I could not find it. Is there a way in ChimeraX to create a bar showing the color scale ("Color Key" in Chimera) e.g. when coloring a map by local resolution? Thank you! -- Ricardo Diogo Righetto

2 1

How to select one of ligands which is named in different numbers
by Meinan Lyu 11 Nov '19

11 Nov '19

Hi, I am having trouble in how to select one of the ligands which named LIG 1, LIG 2, LIG 3, LIG 4, etc. when I hide all of them and want to specifically show LIG 1, using "show LIG 1 target a" command does not work. How to deal with this that the ligand name have a space inside? Thank you very much. Best regards Meinan

2 1

surface cap transparent when surface dust on ?
by bertrand beckert 06 Nov '19

06 Nov '19

Hi All, I have been recently trying to color a volume by a map value... So far it worked really well using the color command.... color sample #1 map #2 offset 0.1 palette " values" But my problem is the following: when I clip the volume the surface cap is now transparent... is there a way to have the surface cap not transparent but instead colored according to the map value like it is in Chimera? Also another thing, I usually do is the following: open volume1.mrc volume surfaceSmoothing true surface dust #1 lighting soft Then, when I clip through the map the surface cap is again transparent unless dust is turn off (suface undust #1)... I also tried surface cap false and then true but nothing changes... Is there a way around it? or does the surface dust function is somehow turn the surface cap always transparent? Thanks for the hard work and the nice software! Best Bertrand

3 3

Catalina woes
by ubaumann 05 Nov '19

05 Nov '19

Dear all I am trying to use ChimeraX after a clean install upgrade to Catalina, OSX 10.15.1 I get the attached error message that the software can’t be scanned for malicious code Is there any way around this, please? Same holds for Chimera ( and other programs….) Thanks a lot! Kind regards, Ulrich

2 1

Trouble initializing ChimeraX on CentOS
by Brown, Alex 18 Oct '19

18 Oct '19

Hello and good morning, I have always had a great experience using Chimera and so I was hoping to try out ChimeraX for some of our larger cryo-em data sets. However, following download and an install that did not seem to produce an error message, I can not seem to initialize the program. I have copied the output from the command prompt below. Beyond that, I should probably also mention that we are running the centos-release-7-6.1810.2.el7.centos.x86_64 operating system with intel chips and nvidia graphics cards. [root@gaolab ~]# chimerax-daily NOTE: available bundle cache has not been initialized yet WARNING: could not retrieve bundle list from toolshed NOTE: Traceback (most recent call last): File "/opt/UCSF/ChimeraX-daily/lib/python3.7/runpy.py", line 193, in _run_module_as_main "__main__", mod_spec) File "/opt/UCSF/ChimeraX-daily/lib/python3.7/runpy.py", line 85, in _run_code exec(code, run_globals) File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site- packages/ChimeraX_main.py", line 871, in <module> exit_code = init(sys.argv) File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site- packages/ChimeraX_main.py", line 580, in init check_available=opts.get_available_bundles) File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site- packages/chimerax/core/toolshed/__init__.py", line 1681, in init _toolshed = Toolshed(*args, **kw) File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site- packages/chimerax/core/toolshed/__init__.py", line 359, in __init__ if not available.has_cache_file(self._cache_dir): File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site- packages/chimerax/core/toolshed/available.py", line 109, in has_cache_file return os.path.exists(os.path.join(cache_dir, _CACHE_FILE)) File "/usr/bin/../../opt/UCSF/ChimeraX-daily/lib/python3.7/posixpath.py", line 80, in join a = os.fspath(a) TypeError: expected str, bytes or os.PathLike object, not NoneType BUG: TypeError: expected str, bytes or os.PathLike object, not NoneType File "/usr/bin/../../opt/UCSF/ChimeraX-daily/lib/python3.7/posixpath.py", line 80, in join a = os.fspath(a) _See log for complete Python traceback._ Thanks in advance for any support you may be able to provide on this! -Alex Alexander Brown IV, PhD Postdoctoral Researcher Horae Gene Therapy Center Li Weibo Institute for Rare Diseases Research University of Massachusetts Medical School 368 Plantation Street, AS6-2011 Worcester, MA 01605 Phone: (508) 856-3316 Email: alex.brown(a)umassmed.edu<mailto:alex.brown@umassmed.edu> Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential, proprietary and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender immediately and destroy or permanently delete all copies of the original message.

2 1

problem of chimerax
by 陈柳青 18 Oct '19

18 Oct '19

Hello! I tried install either daily builds or release 0.9 of chimeraX on my win10 64 system, but both encounter the same problem showed in the attachment. After startup, i can't see any menu! but when i move mouse on the menu , it will appear sub menu. How can solve this bug? sincerely Liuqing chen

2 1

macOS Catalina gives PermissionError opening files
by Tom Goddard 15 Oct '19

15 Oct '19

If you are thinking of upgrading to the new macOS Catalina (10.15) and want to use ChimeraX on it you might hold off. We have found that opening files using the ChimeraX open command or the recent files thumbnails often causes PermissionError and fails to open the files. This is caused by a new macOS Catalina security feature when any app that tries to open a file under Desktop, Downloads, or Documents must first raise a permission dialog asking if the app is allowed to open files from that directory. When using the ChimeraX File / Open dialog (from the File menu) the permission dialog is shown and works. But if you use the ChimeraX open command of recent files thumbnails on directories that you have not granted permission for with the Open dialog, then those fail with PermissionError -- apparently those methods of opening are not able to show the permission dialog. Other applications (e.g. photo editing program Gimp) have the same problem. We do not yet know how to solve this. Tom

2 2

Re: [chimerax-users] [Chimera-users] surface color
by Elaine Meng 14 Oct '19

14 Oct '19

Hi Mike, So close! You’re only missing the “palette” keyword before “rainbow” … try: color height #1 center 0,0,0 axis z palette rainbow <http://rbvi.ucsf.edu/chimerax/docs/user/commands/color.html#distance> <http://rbvi.ucsf.edu/chimerax/docs/user/commands/color.html#palette-options> (By the way, there is a chimerax-users(a)cgl.ucsf.edu list CC’d here if you have questions specifically about ChimeraX.) I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Oct 14, 2019, at 2:43 PM, Schmid, Michael F. <m-schmid(a)slac.stanford.edu> wrote: > > I’m trying to do the same thing as Chimera’s “Surface Color”, but in ChimeraX, on the command line. After reading the docs, I tried “color height #1 (the map designation) center 0,0,0 axis z rainbow”. It gave “expected a keyword”. What did I miss? > Thanks, > Mike

1 0

show stands' arrows a little werid
by Meinan Lyu 14 Oct '19

14 Oct '19

Dear Dr., The attached is a picture I saved which the stands' arrows are so wide when using chimeraX to draw some figures, could you please tell me how to make it normal? The problem showed after I put into these two command(not quite sure yet):1. zone #3:Lig residueDistance 5 label false 2. cartoon #3/b suppressBackboneDisplay true. Thank you very much！ Best regards, Meinan CWRU

3 5

Soft lighting changes when additional model is displayed
by Gabor PAPAI 14 Oct '19

14 Oct '19

Dear ChimeraX team, If I open a second model in ChimeraX (0.91) the ambient occlusion in soft lighting mode on the first model disappears or becomes diminished. How can I revert this effect? I attach an image to illustrate this phenomenon. The only change between the two displays that I opened a model of DNA and placed close to the first model. Best regards, Gabor [cid:6AAD58A0-1B6C-4362-8C29-57D033327EBF@igbmc.u-strasbg.fr] --- Gabor Papai IGBMC Integrated Structural Biology 1, rue Laurent Fries, Bp 10142 67404 Illkirch, France Tel: +33-3-69485288

2 4