- ChimeraX-users - RBVI Mailing Lists

How to reproduce the output of "info" in python script?
by Artie Kushner 04 Jun '24

04 Jun '24

Hi there, hope you are all doing well I'm wondering if anyone has a good idea of how to reproduce the output of the *info* command in the GUI inside a python script. Precisely the *info* command without any specifiers s.t. that all models and submodels are listed with minimal info. Like the following: *...#1.87, 4v6x Cu, shown419 atoms, 421 bonds, 56 residues, 1 chains (Cu)#1.88, 4v6x Cv, shown419 atoms, 421 bonds, 56 residues, 1 chains (Cv)#1.89, 4v6x Cz, shown1741 atoms, 1769 bonds, 217 residues, 1 chains (Cz)* Perhaps there is a better way to do this, but my use case is splitting a bigger structure into multiple chains (as you can tell from above there are 89 chains in 4V6X). I'd like to be able to correlate chain IDs (ex. *Cz*) with the model identifiers (ex. *#1.89*) programmatically from within python to script against individual chains further. I'm sure there is more than one way to do it, but i haven't been able to find either so far. Most that i found is the model_info command: *from chimerax.list_info.util import spec, model_info...def test_func(session, structure: AtomicStructure): print(model_info(structure))**<<<Missing or invalid "structure" argument: must specify 1 atomic structure, got 89 for "#1".* *def register_ribrepr_command(logger): from chimerax.core.commands import CmdDesc, register from chimerax.atomic import AtomicStructureArg, Chain, Residue, Atom desc = CmdDesc( required = [("structure", AtomicStructureArg)], required_arguments = ["structure"], synopsis = "representation ", ) register("test_func", desc, test_func, logger=logger)* but it presupposes that I pass the model by spec I pass the "top-level" structure. It throws error saying that it contains 89 instead of 1 structures: *Missing or invalid "structure" argument: must specify 1 atomic structure, got 89 for "#1".* Any other way of getting at the correspondence dict between chains/"submodels" created with i.e. *`split chains`* and their chain_id's (aka *auth_asym_id* 's) in Python space would work for me. Perhaps there is a way to list all objects in the "Models" section (picture below)? Thanks in advance Artie [image: image.png]

2 2

Question/ GPCR complex
by Ranti Dev Shukla 03 Jun '24

03 Jun '24

Hello, Greetings from NIH, Maryland. I am trying to make FRET for G-proteins. I put CFP protein within G.alfa2 on a loop between two nearby helixes and YFP protein on the N-terminal of G-beta. I made the complex using Alphafold but how to see this complex along with the membrane? Is there some command for it please? I would appreciate your kind help. Thanks Ranti Best wishes, Ranti Dev Shukla Visiting Fellow, NIH, Rockville, MD Email: rantibio2(a)gmail.com *rantibio3(a)gmail.com <rantibio3(a)gmail.com>* Phone: +1 865-910-2985 *Teachers* make a lasting impact in the lives of their students

2 1

Rotation of the multi-model object using the symmetric axis
by Enrico Martinez 03 Jun '24

03 Jun '24

Dear Chimera-X users! I am dealing with the visualisation of a complex dimer where each monomer is defined as a separate model like #1 and #2. For visualisation purposes I need to rotate the input construct by 180 degrees with the axis of rotation in the middle between the two monomers to avoid the shift of the complex in the x-plane at the end. That's what I have tried: # turn on 180 deg during 10 sec roll y 0.72 250 center #1,2 protein wait 250 but the construct still shifted a bit towards one of the monomers. How could I do ii using the rotation axis, which would be in the center between them ? Many thanks in advance Enrico

3 4

Conversion of multiple files into PDB
by Enrico Martinez 03 Jun '24

03 Jun '24

Dear ChimeraX Users ! I am dealing with the analysis of multiple structural coordinates generated by AlphaFold for a target protein in *.cif extension. My goal is superimpose all the coordinates to the first model and save them in .pdb as separate files. So my script could be: open ./*.cif match #2-6 to #1 # probably there is a better solution # and some command for save What could be the solution to save all the coordinates in automatic way in separate pdb with the name patterns corresponded to the ID of these models ? Many thanks in advance Enrico

3 3

attributes from viewdockx.
by Krishnan Raman 31 May '24

31 May '24

Hi guys, * Make ViewDockX table information available as model attributes<https://rbvi.github.io/chimerax-recipes/vdx_attrs/vdx_attrs.html>. December 17, 2021 Used this Py to register my attributes into chimerax. Is there a way to display the attributes next to the model of the ligand? Thanks Krish Krishnan Raman Executive Director, Structural Biology BioCryst Pharmaceuticals CONFIDENTIALITY NOTICE This email, including any attachments, may contain confidential or legally privileged information that is intended only for the individual or entity to whom it is addressed. If you are not the intended recipient, please be advised that any dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please reply to the sender so that BioCryst Pharmaceuticals, Inc. can take corrective measures and then permanently delete this email and any attachment, including any printed copies. Thank you.

2 5

Grid mode for multiple superimposed models
by Enrico Martinez 31 May '24

31 May '24

Dear ChimeraX users ! I am working on the structural analysis of the predictions of the alpha fold loaded in Chimera as different models. Do we have an option that would allow us to take each model as an element of the grid so that the superimposed models could be displayed side by side (e.g. in one row for 1-3 models or in 2 rows for 4-6 models etc)? I've seen this option in P*mol, but would like to try it in ChimeraX if it exists! Many thanks in advance Enrico

2 2

ChimeraX question
by Meden Isaac-Lam 30 May '24

30 May '24

Hello UCSF Chimera Team, I used Chimera and AutoDock Vina about 2 years ago. I just downloaded ChimeraX and I am trying to learn it. However, I forgot how to link AutoDock Vina. In the previous Chimera, it was under Tools and Surface Binding Analysis. Any suggestion on how to do it? Thanks. Your assistance is greatly appreciated. Sincerely, Meden F. Isaac-Lam Purdue University Northwest

2 2

Error installing bundle: No module named pandas
by Ricardo Righetto 29 May '24

29 May '24

Hi, Not sure if this should be reported here or to the bundle developers directly, but in any case here it goes: When trying to install the ArtiaX plugin on ChimeraX v1.7.1 on Ubuntu 22.04 from the toolshed (both via command line and through the GUI) I ran into the following error: *** error: subprocess-exited-with-error × python setup.py egg*info did not run successfully. │ exit code: 1 ╰─> [10 lines of output] Traceback (most recent call last): File "", line 2, in File "", line 34, in File "/tmp/pip-install-ni7khioh/starfileddcd2480b29b4cad9233c413b6568ba0/setup.py", line 2, in from starfile.version import VERSION File "/tmp/pip-install-ni7khioh/starfile_ddcd2480b29b4cad9233c413b6568ba0/starfile/__init* .py", line 1, in from .functions import open, read, new, write, version, star2excel File "/tmp/pip-install-ni7khioh/starfile _ddcd2480b29b4cad9233c413b6568ba0/starfile/functions.py", line 3, in import pandas as pd ModuleNotFoundError: No module named 'pandas' [end of output] note: This error originates from a subprocess, and is likely not a problem with pip. error: metadata-generation-failed × Encountered error while generating package metadata. ╰─> See above for output. note: This is an issue with the package mentioned above, not pip. hint: See above for details . *** That is, it was complaining that the pandas package was missing when trying to install the starfile package, which in turn is a dependency of ArtiaX. I'm puzzled why it wasn't able to install pandas by itself, since it is listed as a dependency of starfile. Anyway, after trying many different things, I found out that I could install pandas via pip directly through the ChimeraX command line interface: pip install pandas And after that the bundle installation worked just fine. Not sure what to make of this, but maybe it's useful to developers or other users running into the same issue. Thank you, -- Ricardo Diogo Righetto

1 0

Question Regarding rangecolor kdHydrophobic command
by Knotts, Garrett 29 May '24

29 May '24

Good morning, I am in the process of switching over from Chimera to ChimeraX. I have found ChimeraX to be incredibly more user friendly and well-designed. I wanted to reach out regarding the rangecolor kdHydrophobic command. I often use this command in chimera to color protein surfaces based on hydrophobic character. However, we have a color scheme which our lab has consistently used. In the switch from Chimera to ChimeraX, I have not found a way to color by hydrophobicity with our color scheme using this or other commands, but I have found a way to color hydrophobic regions onto surfaces, without the ability to change the colors. Is there a way to do this in ChimeraX? Thanks for the help! Best, _______________________________ Garrett Knotts Undergraduate Lab Assistant (Johnson Lab) Legislative Director of the Mississippi State University Student Association Vice President of Honors Ambassadors Sigma Phi Epsilon Learning Community Coordinator [cid:8783bc97-b3f7-4f42-85c5-130c16ad956f]

2 1

Behavior of "cd" when executed through a script
by Vorländer,Matthias Kopano 29 May '24

29 May '24

Dear ChimeraX team, I have a series of scripts that contain a “cd” statement to set the working directory. I execute the scripts (which opens a model and map and colors the map). I then manually adjust the orientation and threshold and want to save a picture with “save map.png” (I want this png tp be saved in the folder that I set with the script). I have noticed that in this scenario ChimeraX has “forgotten” the cd statement from the script file and has fallen back to default working directory (or the last working directory manually set in the session before I exectuted my script). At least for me it would be more convenient and logical if the working directory can be set and maintained after habing executed a script. Note: if I don’t execute the script by double clicking but by copy/paste, the working directory is correctly maintained. Would be great if the behavior could be adjusted 😊 Many thanks and best wishes, Matthias

2 3