- ChimeraX-users - RBVI Mailing Lists

projecting full model from monomer
by Dmitry Semchonok 13 Nov '23

13 Nov '23

Dear colleagues, I have a monomer with biomt information that describes the full model. To see the full model, I use the command sym when opening the monomer in Chimera. Could you please prompt the correspondent command in ChimeraX to project the complete model in ChimeraX based on the information stored in the monomer? Thank you Kind regards, Dmitry

2 4

ChimeraX trial license
by Jang,Chang Woon,US-St. Louis 12 Nov '23

12 Nov '23

Dera UCSF ChimeraX Team, My name is Chang Woon Jang working for Nestle Purina. I am interested in ChimeraX for a molecular modeling project. Could I use a trial license for a month before buying the commercial license? Thanks, Chang Woon Jang

2 1

updating ChimeraX for rc/daily build with Isolde
by Dmitry Semchonok 11 Nov '23

11 Nov '23

Dear colleagues, I would like to update ChimeraX to rc version or daily build. Trying to install Isolde / Clipper delivered me the following error (either via the command line within ChimeraX, or via the ChimeraX update button) Clipper toolshed install C:/Users/Dmitry/Downloads/ChimeraX_Clipper-0.22.1-cp311-cp311-win_amd64.whl ERROR: Could not find a version that satisfies the requirement ChimeraX-Core<1.8,>=1.7.dev202306142048 (from chimerax-clipper) (from versions: none) ERROR: No matching distribution found for ChimeraX-Core<1.8,>=1.7.dev202306142048 ISOLDE toolshed install C:/Users/Dmitry/Downloads/ChimeraX_ISOLDE-1.7.dev0-cp311-cp311-win_amd64.whl ERROR: Could not find a version that satisfies the requirement ChimeraX-Core<1.8,>=1.7.dev202306142048 (from chimerax-isolde) (from versions: none) ERROR: No matching distribution found for ChimeraX-Core<1.8,>=1.7.dev202306142048 Is it possible to install Isolde/clipper with rc/daily version? If yes, how to fix the error? Thank you. Kind regards, Dmitry

2 1

Zooming in and out in ChimeraX
by Dale Calleja 09 Nov '23

09 Nov '23

Hello, I am currently learning to use ChimeraX (v1.6.1) and I am having issues with my scroll wheel. I notice when I first open the software using the scroll wheel on my mouse will zoom in and out of the structure but, after some time it simply stops working and the scroll wheel does nothing. Is this a button I am accidentally pressing or have I discovered a bug? It doesn’t seem to have any pattern, I am just clicking around changing the display of my protein. Thanks! Dale. Dale Calleja PhD Student, Komander Lab Ubiquitin Signalling Division WEHI 1G Royal Parade Parkville VIC 3052 Australia Email calleja.d(a)wehi.edu.au<mailto:calleja.d@wehi.edu.au> [WEHI Logo] Walter and Eliza Hall Institute of Medical Research 1G Royal Parade Parkville Victoria 3052 Australia www.wehi.edu.au<https://wehi.edu.au> Twitter<https://twitter.com/WEHI_research> | Facebook<https://www.facebook.com/WEHIresearch/> | Instagram<https://www.instagram.com/wehi_research> | Youtube<https://www.youtube.com/user/WEHImovies> | LinkedIn<https://www.linkedin.com/company/wehi_research> WEHI acknowledges the Wurundjeri people of the Kulin Nation as the traditional owners of the land where our campuses are located and the continuing connection to country and community. Private and confidential The content of this e-mail and any attachments may be private and confidential, intended only for use of the individual or entity named. If you are not the intended recipient of this message you must not read, forward, print, copy, disclose, use or store in any way the information this e-mail or any attachment contains. If you are not the intended recipient, please notify the sender immediately and delete or destroy all copies of this e-mail and any attachment.

2 2

ui mousemode right when in ISOLDE
by Alexis Rohou 09 Nov '23

09 Nov '23

Hi there, Wondering if anyone else gets this behavior: When ISOLDE is running, setting the right mouse click to translate selected atoms does NOT associate shift-right-click with rotating selected atoms; instead, shift-right click does a zoom. In addition, if I try to force it by issuing the two commands below, the shift right click still isn't a rotate selected atom; instead, it does a translate selected atoms. ui mousemode right "translate selected atoms" ui mousemode shift right "rotate selected atoms" My workaround is to use alt-right for rotating instead. That does work: ui mousemode right "translate selected atoms" ui mousemode alt right "rotate selected atoms" This is with ChimeraX 1.6.1, but I'm pretty sure I noticed this behavior in earlier versions also. Tristan recently posted a screen capture where it's clear he doesn't have this problem, but he's on Windows and I'm on Mac, so I wonder whether that might have something to do with it. Any ideas? Cheers, Alexis

3 5

how to build N-linked glycans
by Alexis Rohou 09 Nov '23

09 Nov '23

Hi there, How would you recommend I go about building an N-linked glycan chain off of an ASN in an existing model using ChimeraX or ISOLDE? Is there documentation on this somewhere? Cheers, Alexis

2 3

Custom calculation of forcefields for ligands in Isolde
by Paul Sauer 09 Nov '23

09 Nov '23

Dear ChimeraX and Isolde experts, I am trying to parameterize a ligand in Isolde 1.6 in order to fit it into my density. The ligand conforms to the requirements that are outlined in the manual (not covalently bound, only consists of certain elements, etc). However, parameterizing the residue using the inbuilt ANTECHAMBER/AMBER utility times out unfortunately, with an error saying that convergence in SCF cannot be reached. Upon investigating the issue I learned that it could be possible to avoid this error with adjusted command line parameters for AMBER in order to let it run longer for correct values. My question is: Is it possible to pass custom flags or command line arguments from Isolde to AMBER in ChimeraX? And if yes, how? The default command ‘Isolde parameterize residue’ does not seem to have any AMBER specific options. For example, how can I add 'adding ndiis_attempts=700’ (or other modifications) to my input sqm file? Thank you in advance, Paul

3 3

How to refine a symmetric model with ISOLDE
by Guillaume Gaullier 09 Nov '23

09 Nov '23

Hello, A question for Tristan, since I know you read this list. :-) I have a cryoEM map that was produced with C7 symmetry enforced. I can fit the alphafold prediction of one protomer, and am pretty confident in this initial rigid fit because the map is good. Now with Tom's help I know how to generate the C7 symmetric assembly and store the symmetry info in a cif file with a single protomer, so I can regenerate the heptamer as needed (and this seems like the correct way to deposit the end result). But this model still needs proper refinement: the rigid fit shows that the conformation predicted by alphafold deviates from the map at several locations. What is a sensible refinement strategy for something like this? Because symmetry was enforced for the map, I am inclined to refine only a single protomer and add the correct symmetry info that will regenerate the heptamer. But don't I need the neighboring protomers during refinement, for the interface residues to behave correctly during MDFF? I would think so. Not sure what to do, some advice would be very helpful. Thank you in advance, Guillaume När du har kontakt med oss på Uppsala universitet med e-post så innebär det att vi behandlar dina personuppgifter. För att läsa mer om hur vi gör det kan du läsa här: http://www.uu.se/om-uu/dataskydd-personuppgifter/ E-mailing Uppsala University means that we will process your personal data. For more information on how this is performed, please read here: http://www.uu.se/en/about-uu/data-protection-policy

1 0

How to write biological assembly info in PDB or mmCIF?
by Guillaume Gaullier 08 Nov '23

08 Nov '23

Hello, I have a cryoEM map that was generated with C7 symmetry enforced, with its symmetry axis parallel to the z axis in ChimeraX. I fetched a prediction from AlphaFoldDB and docked it in the map. So far, so good. I can generate the other protomers with a command like this: sym #1 C7 axis z center cofr (assuming #1 is the single protomer from AlphaFoldDB, and the cofr is correctly lying on the symmetry axis, which I get sufficiently close if I center the view on the map) Now, because symmetry was enforced for the map, it makes no sense to model, refine and store the entire heptamer. I should be able to do everything with a single protomer, and store relevant info as "biological assembly" so the heptamer can be regenerated from the protomer. At least if I am understanding this correctly. I tried the above command, or this variant: sym #1 C7 axis z center cofr addMmcifAssembly true And subsequently saving in PDB or mmCIF format, but none of this produces what I want, which is a file containing the single protomer + assembly info. I either get a file with the single protomer or a file with the heptamer, in both cases without any biological assembly info. I looked up the options of the save command for PDB and mmCIF format, but found nothing that seemed relevant to this problem. Is there a way to do this? Or am I misunderstanding something? Related question: it might make sense to use the whole heptamer for refinement, so all interfaces between protomers "see" each other (probably important when using ISOLDE). What is the best way to deal with this? Build and refine the whole heptamer and save only a single protomer + assembly info at the very end? Or have the symmetry enforced from the beginning, throughout the whole refinement process, and really ever refine a single protomer? (7 times less work, so probably the preferred option). Thank you in advance, Guillaume När du har kontakt med oss på Uppsala universitet med e-post så innebär det att vi behandlar dina personuppgifter. För att läsa mer om hur vi gör det kan du läsa här: http://www.uu.se/om-uu/dataskydd-personuppgifter/ E-mailing Uppsala University means that we will process your personal data. For more information on how this is performed, please read here: http://www.uu.se/en/about-uu/data-protection-policy

2 6

Modeller down
by Dominik Dekleva 08 Nov '23

08 Nov '23

Hi My name is Dominik Dekleva, phd student at the University of Ljubljana. I'm attempting to use the Modeller feature in ChimeraX but doesn't seem to be working. Is the webservice down? Best regards, Dominik Dekleva

2 2