- ChimeraX-users - RBVI Mailing Lists

save clipped volume
by Yanhe Zhao 20 Feb '25

20 Feb '25

Greeting there ChimeraX developer and community, I have "clip" used on my map and currently want to save the clipped one as a new mrc file, what is the best way to do this? I checked the "save Map" command and found the region option, but I don't think it is the right option if I have my clip plan tilt. Thanks a lot for any input. Thanks and cheers, Yanhe

2 2

Help Needed with Building Capsid for ssRNA Homolog
by Bruno Hay Mele 20 Feb '25

20 Feb '25

Hi everyone, I am trying to build the capsid for a homolog of Chaetoceros socialis forma radians RNA virus 1 (PDB: 8b38). My approach was to work by homology, transferring the assembly/symmetry information from the PDB entry to my model, which I built by assembling homologs of the three subunits of 8b38. Unfortunately, this has not been as straightforward as I hoped. Ibm a complete newbie in this area, and my attempts to copy the relevant parts of the assembly information or use the ChimeraX bsymb tool have led nowhere. Could someone please point me to the right solution? Ibd really appreciate both: A practical solution: How to correctly transfer the symmetry information and generate the full capsid assembly in ChimeraX. Some references or explanations: Resources that explain why the solution works this way, so I can understand the underlying principles. Any help or pointers would be very much appreciated. Thank you very much for your time and assistance. Cheers, -- Bruno Hay Mele, PhD 2D-20, Biology Dept., University of Naples Federico II https://github.com/bhym/ | +39 081 67 9118

2 2

ChimeraX Model Joining
by Nieder, Claire 20 Feb '25

20 Feb '25

Hey there, I am a grad student at UConn trying to covalently link two PDB models by inserting a GFP into the third intracellular loop of 5HT4. If you have any advice, I would really appreciate it. Thanks, Claire Nieder Kienzler Lab UConn Chemistry

2 3

(no subject)
by FRANGIE Christian 20 Feb '25

20 Feb '25

Dear UCSF ChimeraX Support Team, My name is christian frangieh, I am currently using chimera x and i want to check the interacting residues that form the interface between 1 chain with 2 other different chains. for example my model has 3 chains (chain A,B,C) i want to have a list of the resideus of chain A and B that are interacting with chain C Can you please help me with this? Thank You christian

1 0

Re: [Chimera-users] script for clashes
by Eric Pettersen 18 Feb '25

18 Feb '25

Hi Valerio, Well, one of the main motivations for using ChimeraX is that running commands actually return results instead of nothing. So the 'clashes' command returns a dictionary of the clashes, as described here: https://github.com/RBVI/ChimeraX/blob/1bae62d955f4b9d6d05a31541af0372f11d36… . Therefore you do not need all that extra code that Chimera needs to try to determine if there were any clashes. Instead it's just: clashes = run(session, "clashes") if clashes: # code for existing clashes else: # code for no clashes Now, reasonable structures should have at most a few clashes, and usually zero, not many thousands like your structures seem to have. I suggest opening one of the structures interactively in ChimeraX, run the "clashes" commands and look to see why there so many clashes. --Eric > On Feb 17, 2025, at 3:03 AM, chiarini(a)takisbiotech.it wrote: > > Dear Prof Pettersen, > > Thank you so much for your advice. So far I managed to operate in chimeraX and now I can see the outputs of my script. righ now I'm running the following: > > > # -*- coding: utf-8 -*- > > import os > from chimerax.core.commands import run > > # Funzione principale che accetta la sessione > def process_pdb_files(session): > # Specifica la cartella con i file PDB > folder_path = "C:/Users/utente/Desktop" # Modifica il percorso della cartella > > # Stringa da cercare nei file > search_string = "A3a" > > # Lista dei file PDB nella cartella > file_names = [fn for fn in os.listdir(folder_path) if fn.endswith(".pdb")] > > # Stampa dei file trovati nella cartella per debugging > print("File trovati nella cartella:", file_names) > > # Loop su ogni file che contiene 'search_string' nel nome > for pdb_file in file_names: > if search_string in pdb_file: > pdb_path = os.path.join(folder_path, pdb_file) > > # Apre il file PDB > print(f"Apertura del file {pdb_file}...") > run(session, f"open {pdb_path}") > > # Calcola i clash (comando corretto per ChimeraX) > run(session, "clashes") > > # Verifica se ci sono clash > clashes_found = False > for m in session.models: > if getattr(m, 'category', None) == "contacts": > clashes_found = len(m.pseudoBonds) > 0 > if clashes_found: > break > > # Se ci sono clash, elimina il file > if clashes_found: > os.remove(pdb_path) > print(f"Clash trovati, il file {pdb_file} è stato eliminato.") > else: > print(f"Nessun clash trovato per {pdb_file}.") > > # Chiude il modello dopo averlo processato > run(session, "close all") > > # Questa parte assicura che la funzione venga chiamata correttamente > def main(session): > process_pdb_files(session) > > # Quando esegui lo script in ChimeraX, la sessione viene passata automaticamente > main(session) > > AND I GOT THE FOLLOWING OUTPUT: > > runscript C:/Users/utente/Desktop/chimera_script2.pyFile trovati nella cartella: ['A3a_structure_1.pdb', 'A3a_structure_2.pdb', 'A3a_structure_3.pdb', 'A3a_structure_4.pdb', 'A3a_structure_5.pdb'] > Apertura del file A3a_structure_1.pdb... > open C:/Users/utente/Desktop\A3a_structure_1.pdb > Chain information for A3a_structure_1.pdb #1 > Chain Description > 0 2 4 6 8 C E G I K M O Q S U W Y a c e g i k m o q s u w y No description available > 1 3 5 7 9 B D F H J L N P R T V X Z b d f h j l n p r t v x z No description available > A No description available > clashes84336 clashes > Nessun clash trovato per A3a_structure_1.pdb. > close allApertura del file A3a_structure_2.pdb... > open C:/Users/utente/Desktop\A3a_structure_2.pdb > Chain information for A3a_structure_2.pdb #1 > Chain Description > 0 2 4 6 8 C E G I K M O Q S U W Y a c e g i k m o q s u w y No description available > 1 3 5 7 9 B D F H J L N P R T V X Z b d f h j l n p r t v x z No description available > A No description available > clashes655434 clashes > Nessun clash trovato per A3a_structure_2.pdb. > close allApertura del file A3a_structure_3.pdb... > open C:/Users/utente/Desktop\A3a_structure_3.pdb > Chain information for A3a_structure_3.pdb #1 > Chain Description > 0 2 4 6 8 C E G I K M O Q S U W Y a c e g i k m o q s u w y No description available > 1 3 5 7 9 B D F H J L N P R T V X Z b d f h j l n p r t v x z No description available > A No description available > clashes626886 clashes > Nessun clash trovato per A3a_structure_3.pdb. > close allApertura del file A3a_structure_4.pdb... > open C:/Users/utente/Desktop\A3a_structure_4.pdb > Chain information for A3a_structure_4.pdb #1 > Chain Description > 0 2 4 6 8 C E G I K M O Q S U W Y a c e g i k m o q s u w y No description available > 1 3 5 7 9 B D F H J L N P R T V X Z b d f h j l n p r t v x z No description available > A No description available > clashes482406 clashes > Nessun clash trovato per A3a_structure_4.pdb. > close allApertura del file A3a_structure_5.pdb... > open C:/Users/utente/Desktop\A3a_structure_5.pdb > Chain information for A3a_structure_5.pdb #1 > Chain Description > 0 2 4 6 8 C E G I K M O Q S U W Y a c e g i k m o q s u w y No description available > 1 3 5 7 9 B D F H J L N P R T V X Z b d f h j l n p r t v x z No description available > A No description available > clashes315894 clashes > Nessun clash trovato per A3a_structure_5.pdb. > close all > > > WHAT ELUDES ME IS THAT FOR EACH STRUCTURE CHIMERA FINDS LOT OF CLASHES BUT THEN RETURNS THE STATMENT "NO CLASH FOUND FOR STRUCTURE X". Why is that? I know these structures have lots of overlapping atoms and it also seems that chimera counts the class "clashes". But maybe it also includes contacts? > I would like to count only steric clashes and atoms superposition which makes the structure impossible. > Thanks in advance for your help. > > Best regards, > > Valerio Chiarini > > Il 2025-02-12 21:06 Eric Pettersen via Chimera-users ha scritto: >> Hi Valerio, >> I should preface things by saying that this script would be >> considerably easier to write in ChimeraX, because in ChimeraX the >> "runCommand" equivalent actually returns results from the command >> instead of nothing. So in ChimeraX you can directly determine if the >> clash-finding command actually found any clashes. >> So clearly the body of your 'if' statement never executed since it >> includes illegal statements that would have produced errors if the >> body of the 'if' statement had been executed, whereas you got no >> output. So the first thing is put "print file_names" right after the >> line that sets files_names and see if any of the file names contain >> your search string ("xxx"). If none of them do, then you need to >> figure out why: is folder_path wrong?; is search_string wrong?; do the >> files not end in .pdb?; etc. >> In addition, I can see some problems even if the 'if' statement body >> had executed. You don't close the models at the end, so they will >> build up and "findclash" will find more and more clashes. Your actual >> findclash command needs to be "findclash #0 test self". There is no >> "chimera.clashClashList". Probably the simplest way to determine if >> clashes were found is checking if the clashes pseudobond group has any >> pseudobonds in it. You can do that with: >> for m in chimera.openModels.list(hidden=True): >> if getattr(m, 'category', None) == "contacts": >> clashes_found = len(m.pseudoBonds) > 0 >> break >> --Eric >> Eric Pettersen >> UCSF Computer Graphics Lab >>> On Feb 12, 2025, at 2:23 AM, valerio chiarini via Chimera-users >>> <chimera-users(a)cgl.ucsf.edu> wrote: >>> Dear Responsible, >>> I am working on a script that should iterate through several >>> structures, check the structures for clashes among all atoms, and >>> eliminate the pdb in any clashes are found. >>> Here is what I have worked out so far: >>> # -*- coding: utf-8 -*- >>> import os >>> from chimera import runCommand as rc >>> from chimera import replyobj >>> import chimera >>> # Specify folder >>> folder_path = "/gporq3/store_0/usr/chiarini/chroma/chroma/" >>> # String to be found >>> search_string = "xxx" >>> # List of files in the folder >>> file_names = [fn for fn in os.listdir(folder_path) if >>> fn.endswith(".pdb")] >>> print("File trovati nella cartella:" + str(file_names)) >>> # Loop on every file containing 'search_string' in the name >>> for pdb_file in file_names: >>> if search_string in pdb_file: >>> pdb_path = os.path.join(folder_path, pdb_file) >>> # Open the PDB >>> rc("open {}".format(pdb_path)) >>> # Calculates clashes >>> rc("findclash") >>> rc("wait") >>> # Verify if any clashes are found >>> clashes = chimera.clashClashList() >>> if clashes: >>> # If clashes are found eliminates the file >>> os.remove(pdb_path) >>> print("Clash trovati, il file {} è stato >>> eliminato.".format(pdb_file)) >>> else: >>> # If no clash, exit normally >>> print("Nessun clash trovato per {}.".format(pdb_file)) >>> But no analisys is done at all. I have been searching through the >>> script page (https://www.rbvi.ucsf.edu/trac/chimera/wiki/Scripts) in >>> order to found some clue on this function but so far I have found >>> none. >>> Could you help me on this issue? >>> Thank you in advance >>> Valerio Chiarini _______________________________________________ >>> Chimera-users mailing list -- chimera-users(a)cgl.ucsf.edu >>> To unsubscribe send an email to chimera-users-leave(a)cgl.ucsf.edu >>> Archives: >> https://mail.cgl.ucsf.edu/mailman/archives/list/chimera-users@cgl.ucsf.edu/ >> _______________________________________________ >> Chimera-users mailing list -- chimera-users(a)cgl.ucsf.edu >> To unsubscribe send an email to chimera-users-leave(a)cgl.ucsf.edu >> Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimera-users@cgl.ucsf.edu/ > > -- > Dr. Valerio Chiarini > > _Senior Scientist_ > > Proteins & Monoclona Antibodies Department – Takis Biotech > > c/o Tecnopolo > > Via di Castel Romano, 100 > > 00128 Rome, Italy > > Tel.: +39 06-50576077 > > Fax: +39 06-50576710 > > Email: chiarini(a)takisbiotech.it > > Web: https://urldefense.proofpoint.com/v2/url?u=http-3A__www.takisbiotech.it&d=D… > > D_.lgs. 196/03_ > > _Le informazioni contenute in questa comunicazione e gli eventuali > documenti allegati hanno carattere confidenziale, sono tutelate dal segreto > professionale e sono ad uso esclusivo del destinatario. Nel caso questa > comunicazione Vi sia pervenuta per errore, Vi informiamo che la sua > diffusione e riproduzione è contraria alla legge e preghiamo di darci > prontamente avviso e di cancellare quanto ricevuto. __Grazie._ > > _This e-mail message and any files transmitted with it are subject to > attorney-client privilege and contain confidential information intended > only for the person(s) to whom it is addressed. If you are not the intended > recipient, you are hereby notified that any use or distribution of this > e-mail is strictly prohibited: please notify the sender and delete the > original message. __Thank you._ >

1 0

Bundle development for chimeraX - svg onClick event to run command from QWebEngineView
by Lou Holland 18 Feb '25

18 Feb '25

Hello, Apologies if this is the wrong email address to contact about this. I am currently working on a privateer bundle for carbohydrate validation in chimeraX. At present, I have it so that the privateer tool will display SNFGs of glycans present in the structure using svgs displayed in a QWebEngineView(). I would like, if possible, on clicking elements of the svg to run a chimeraX command (view /chainID:resID) to centre the view window on the residue in question. At present, I can implement an onClick event to display the command that should be run, but haven't managed to figure out how to just run the command from within that QWebEngineView. Is there a mechanism already in place for doing something like this that I could take advantage of? I'd considered using the "log html" to display the svgs in the log instead of the WebEngineView() so that I could take advantage of the href="cxcmd" functionality, but the svgs are long, with semicolons and new-line characters which interfere with this. Best wishes, Lou Holland (Pronouns: they/them) Research Associate York Structural Biology Laboratory, Department of Chemistry, University of York, Heslington, YO10 5DD, York, UK

3 3

Assistance with ChimeraX Syntax for SPRITE Hands-On Module
by Zeenat Bashir 18 Feb '25

18 Feb '25

Dear ChimeraX Developers, I hope this email finds you well! I am currently developing a hands-on module for my students on visualizing SPRITE results using ChimeraX. However, I am facing an issue with the syntax for aligning the residues of *2HNT* with *1A0J*. The module I am using, which was provided by Basil (attached with this email), includes syntax for Chimera (refer to Figures 10 and 11 in the attached document). I have tried adapting the syntax for ChimeraX but have not been successful. I would really appreciate your guidance on this matter or if you could direct me to someone who might be able to assist in generating the correct command line syntax. Thank you so much for your time and help! Zeenat -- *Dr. Zeenat Bashir* *Senior Lecturer* *Biotechnology Lab Coordinator* *Department of Chemical and Biomolecular Engineering* *University of Pennsylvania* *310 Towne Building* *220 S. 33rd Street* *Philadelphia, 19104 -6393* bashirz(a)seas.upenn.edu

2 1

Roll command for multi objects in grid
by Enrico Martinez 18 Feb '25

18 Feb '25

Dear ChimeraX users! Using til command I split six superimposed structures, displaying them as the 2x3 table and then rotate each object along its axis within each grid using "roll" in the following way: # for 6 different object roll models #1 center #1 & protein roll models #2 center #2 & protein roll models #3 center #3 & protein roll models #4 center #4 & protein roll models #5 center #5 & protein roll models #6 center #6 & protein Would it be possible to simplify this to one "roll" command that will automatically rotate all displayed objects in the separate grids along its axis ? Many thanks in advance Enrico

2 3

Questions about match and view commands
by Enrico Martinez 16 Feb '25

16 Feb '25

Dear ChimeraX users! I am performing a visualization of the ensemble of conformers for the same protein defined in the chimerax as models #1 to #6. Here are some of my questions: 1 - I try to superimpose all structures to the first model using match #2-5 to #1 is it possible to use some regular expression instead of #2-5 to select all models from the second to the last e.g. to superimpose all structures to the first one in the script. 2 - I try to automatically orient the superimposed models along its principal axe in one command e.g. using view orient but it does not produce a proper orientation. What kind of trick could work for a nanobody object to orient it automatically e,g, along Z ? Many thanks in advance Enrico

3 6

assistance on bundle writting
by Nguyen, Catherine 14 Feb '25

14 Feb '25

Hello, I was hoping to get your help. I am trying to write a bundle and I am struggling to figure out how I can add psuedo-bonds using python as I want to connect two amino acids by the CA. Would you be able to help me find a way to do this? I hope to hear from you soon, Best wishes, Catherine

2 6

MUNKI Managed Software Download URL
by Antony Nelson 14 Feb '25

14 Feb '25

Hi, I appreciate this might seem an odd request, but do you have a public download location for ChimeraX software? There exists a widely used system by which administrators of Apple computers distribute software to their users by means of applications known as Munki and Autopkgr. Software which can be downloaded from public websites can be managed in such a way that new releases and updates are automatically added to the software repository Apple administrators curate for their users. Without making this publicly available, admins will only update your software when users request the admins to do so. Looking back on the Loupe Browser instances that have been made available to my users, they have only had access to versions: 0.8.0 0.9.0 0.9.1 0.93.0 1.1.1 1.7.1 and today they will have 1.9.0 If your software was made available via public download by a predictable URL, then they would have had access to every version released on the day it was added to your website since it was first requested by users. If you are concerned about the acceptance of terms of conditions then perhaps this could be incorporated into the URL string. Regards

2 1

How to get different silhouette widths for 2 maps
by Hong ZHAN 13 Feb '25

13 Feb '25

Hi there, I am trying to create a video with two maps overlay with different silhouette widths. It is easy to do with 2 images, but how I can do it in a video setting? If I change the width to 6, all maps changes the width to 6. Thanks! -Hong

3 4

Unable to load scripts at startup
by Pranav Shah 13 Feb '25

13 Feb '25

Hi Team, (I accidentally sent this to ChimeraX-bugs, copying it again here) I am trying to load some scripts at startup via the chimerax_custom_functions.cxc command file - open /Users/ps/.chimerax/chimerax_commands/chimerax_custom_functions.cxc in the log file I see the following message: still retrieving bundle list from toolshed open /Users/ps/.chimerax/chimerax_commands/chimerax_molmap_cube.py Error running startup command 'open /Users/ps/.chimerax/chimerax_commands/chimerax_custom_functions.cxc': Unknown command: open /Users/ps/.chimerax/chimerax_commands/chimerax_molmap_cube.py This is strange as simply running "open /Users/ps/.chimerax/chimerax_commands/chimerax_molmap_cube.py" in the ChimeraX command panel runs perfectly fine! the error occurs only when I try to run that line through the .cxc file. Am I missing something? or could this be a bug? I am on the stable release of ChimeraX (version 1.9). Best, Pranav -- Pranav Shah Postdoctoral Research Fellow. Division of Structural Biology, Wellcome Trust Centre for Human Genetics, University of Oxford, Roosevelt Drive, Oxford OX3 7BN, UK

3 3

PAEcontacts colorkey
by ccinsua＠gmail.com 13 Feb '25

13 Feb '25

Hi all, Thank you very much for your work with chimerax. I've been using it to study alphafold complex prediction, and I find the command alphafold contacts very useful. The default color key (guess it is paecontacts, according to documentation) ranges are blue (low PAE) - green (medium PAE) - yellow (high PAE). However, I am unable to add a color key using "key paecontacts". Somehow I have to define it myself. Is there anything I am missing? I would like to stick to the blue-green-yellow scheme. Thanks a lot in advance Carlos

1 1

NASA - Country of Origin Statement and 508 Conformance Request: UCSF ChimeraX
by Price, Dru C. (LARC-B730)[eMITS] 12 Feb '25

12 Feb '25

Hello, my name is Dru and I work for the NASA Commercial IT Acquisition Team. As such, I ensure that all NASA acquisitions of Covered Articles comply with Title II; General Provision Section 208 and Title V; General Provisions Section 514 of the Consolidated Appropriations Act, 2021, Public Law 116-260<https://www.congress.gov/bill/116th-congress/house-bill/133/text>, enacted December 27, 2020. To do so, the Country of Origin (CoO) information must be obtained from the company that develops, produces, manufactures, or assembles the product(s). Please specifically identify the country, or countries, in which each of the following software products is developed and maintained: * UCSF ChimeraX Additionally, if available, please identify all authorized resellers of the product(s) in question. Finally, I am requesting an Accessibility Conformance Report (starting from Page 10 of the attached VPAT) be completed and returned so that NASA can assess the product's level of 508 Conformance. More information regarding Section 508 of the Rehabilitation Act of 1973 and what it means to manufacturers/developers can be found at https://www.section508.gov/sell/vpat. I have attached a blank copy of the latest revision of the VPAT standard if you do not already have a completed VPAT available for this product. Please complete this document to the best of your abilities, if one is not already available. Product / Service Description Model Number Country of Origin Is final testing performed in the United States? Please let me know if you have any questions. Thank you, Dru C. Price Procurement Analyst eMITS | [ROTHE ARES JV] Commercial IT Management Support Croscutting Agency Service (CAS) Branch Enterprise Business Management Office (EBMO) NASA - Office of the Chief Information Office (OCIO) [cid:image001.png@01DB7D5D.40BD4D20]<https://teams.microsoft.com/l/chat/0/0?users=dru.c.price@nasa.gov> [cid:image002.png@01DB7D5D.40BD4D20]

3 3

ChimeraX fetch by PubChem CID
by Elaine Meng 12 Feb '25

12 Feb '25

> On Feb 12, 2025, at 11:41 AM, Alexander Mansueto <alexander.j.mansueto(a)vanderbilt.edu> wrote: > > Can we import pubchem CID molecules to model proteins with lipids? Would be very cool. Hi Alexander, The recommended address for asking ChimeraX questions is the chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> mailing list CC'd here, see "contact us" on our website or in the ChimeraX menu: <https://rbvi.ucsf.edu/chimerax/docs/contact.html> If PubChem Compound has the coordinates, you can open them in ChimeraX by CID, e.g. command open pubchem:12123 - OR - open 12123 from pubchem ... as explained here <https://rbvi.ucsf.edu/chimerax/docs/user/commands/open.html#fetch> ...or with menu: File... Fetch by ID, choosing the Pubchem option and specifying the CID in the dialog: <https://rbvi.ucsf.edu/chimerax/docs/user/fetch.html> However, not every entry in PubChem Compound has coordinates available, so I don't know if it will work for your specific molecules of interest. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Resource for Biocomputing, Visualization, and Informatics Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Get color code of a custom color
by Ahmad Khalifa 11 Feb '25

11 Feb '25

I created a custom color that I want to use in a different session. is there a way to do that besides trying to match colors by eye? Regards.

5 4

steam VR running but still get an error with Vr on command.
by Krishnan Raman 10 Feb '25

10 Feb '25

[cid:5bbc0381-58d6-4058-bc7c-183bcd144645] Steam VR is running and still i get this error. Am i overlooking something? thanks Krish CONFIDENTIALITY NOTICE This email, including any attachments, may contain confidential or legally privileged information that is intended only for the individual or entity to whom it is addressed. If you are not the intended recipient, please be advised that any dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please reply to the sender so that BioCryst Pharmaceuticals, Inc. can take corrective measures and then permanently delete this email and any attachment, including any printed copies. Thank you.

2 1

there is no amination？？？
by 刘涛 07 Feb '25

07 Feb '25

2 2

Recording MD Trajectory Movie in ChimeraX
by Gourav Das 07 Feb '25

07 Feb '25

Dear ChimeraX users, I have performed MD simulation of a system using AMBER20. The topology and trajectory files are in .parm7 and .nc formats, respectively. I would appreciate your guidance on visualizing and recording the trajectory as a movie in ChimeraX. Thank you for your support. With regards, Gourav Das Research Scholar Department of Chemistry Indian Institute of Technology Kharagpur West Bengal, India-721302 Mob: +91-6295251060 --

2 5

Double and Triple Bond Stick Style
by Smith, Chase 05 Feb '25

05 Feb '25

Dear ChimeraX, I was just wondering why there is no way to represent a double or triple bond in either the ligands or the protein amino acids when viewing as a Stick or Ball-and-Stick representation? I sometimes use Chimera or ChimeraX to make visuals for my lectures, and the students often have difficulty in understanding due to the absence of the multiple bonds. I would love to have the ability to represent the double or triple bonds with multiple lines between the atoms. Thank you, Chase Smith ... ChaseSmith, PhD Chair, Department of Pharmaceutical Sciences & Associate Professor of Medicinal Chemistry School of Pharmacy MCPHS University 19 Foster Street | WorcesterMA01608 T 508.373.5717F 508.890.5618C 978.855.7203 chase.smith(a)mcphs.edu www.mcphs.edu MCPHS University Confidentiality Note: This e-mail, and any attachment to it, is intended to be confidential and might be legally privileged. It is intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that reading, copying, disseminating or distributing this email is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you.

5 5

Re: Introduction of a proteolytic cleavage in ChimeraX
by Elaine Meng 04 Feb '25

04 Feb '25

> On Feb 4, 2025, at 3:30 AM, Mark Hilge <markhilge(a)icloud.com> wrote: > > Dear Dr. Meng, > [... details removed ...] > Question: In ChimeraX, is there a possibility to introduce a proteolytic cleavage between say Leu112 and R113? This should result in Leu112 with a carboxylate group followed by a TER keyword. > > Many thanks in advance! > Kind regards, > Mark Dear Mark, It depends what you want to use this for. If it's just for a figure, that is totally different than if you were going to do some extensive workflow afterwards. If you have an input PDB file, one "dumb" way is to text-edit it to put the TER card in before opening in ChimeraX. However, that will not add a carboxylate oxygen, there would just be a dangling C=O. If you wanted an OXT you would have to add it "manually," e.g. in the Build Structure tool. However, that will be problematic because it won't want to add the OXT right on top of the N, which is where it would want to go. You'd also have to change the conformation of the chain, e.g. rotate a bond with the mouse mode or the "torsion" command. <https://www.rbvi.ucsf.edu/chimerax/docs/user/tools/buildstructure.html> <https://www.rbvi.ucsf.edu/chimerax/docs/user/commands/torsion.html> Within ChimeraX, you could use command ~bond to remove bonds. However, if you do this within a chain defined in the input (e.g. PDB SEQRES lines or mmCIF file equivalent), it will then draw a dashed line because it still "knows" they are supposed to be connected within the chain because of the SEQRES records in the PDB file. <https://www.rbvi.ucsf.edu/chimerax/docs/user/commands/bond.html> So it's all more complicated than you might think, especially if you wanted everything to be correct for some subsequent modeling workflow. You might instead give the two parts two different chain IDs. One way is to text-edit the PDB file. Another is to open the thing twice, delete the first part of the chain in one copy, delete the other part of the chain in the other copy, and then use "combine" to create a new model that has both parts but with different chain IDs, and then use "save" to save a PDB file of that combined model. <https://www.rbvi.ucsf.edu/chimerax/docs/user/commands/save.html#pdb> However, you would still need to text-edit the PDB file manually so that there are SEQRES records for the two different chains (the two parts of the original single chain) that each contain only the residues for the corresponding part. These are different than the ATOM records that have the coordinates. And I can't even begin to explain how you might do it in mmCIF, all of this is in PDB format only. So if you bothered to do all that, then if you use "addh" it will automatically add the "OXT" because it will finally recognize the new cleaved C-terminus as a real C-terminus. <https://www.rbvi.ucsf.edu/chimerax/docs/user/commands/addh.html> For future reference: please use chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> address CC'd here to ask questions about ChimeraX, omitting any information that needs to remain private. If you send email to me only, it may not get answered. Thanks, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Resource for Biocomputing, Visualization, and Informatics Department of Pharmaceutical Chemistry University of California, San Francisco

2 1

Suppress errors when using runscript?
by Vorländer,Matthias Kopano 03 Feb '25

03 Feb '25

Hi, I wondered if it is possible to suppress/ignore an error message when executing scripts with runscript. Specifically, I have a script to analyze alphafold (3) predictions and select residue interfaces residues using the interface select command. The selection for each of the five model is then saved in a named selection: # Select interface residues using the interfaces command. interfaces select last-opened&/A contacting last-opened&~/A bothSides true # Create a named selection for the interface residues. name frozen interface_residues$2_model_4 sel This works fine when all models show contacts , however, if one of the models/predictions does not have any residues involved in an interface, the script stops with the error “Nothing is selected by the specifier”. It would be great if the script does not pause at this message. Below the full .cxc script I am using: Best, Matthias # Generate AF contacts for all predictions of an AF3 run # # Usage: # runscript analyse_af3_prediction.cxc <AF_screen_directory> <custom_prediction_name> # The script assumes that five models were generated by AF. It expects the CIF files to be in a sub‐directory # matching the pattern "*model_X*.cif" and the corresponding JSON files in a sub‐directory matching "*data_X*.json" # for each model number X (4, 3, 2, 1, 0). # For the alignment and mseries slider command to work properly, the script assumes no other models are open. echo "Usage: runscript analyse_af3_prediction.cxc <AF_screen_directory> <custom_prediction_name>" ##### Model 4 ##### # Open the structure and its JSON scores for model 4. open $1/*model_4*.cif open $1/*data_4*.json structure last-opened hide show c # Generate AF contacts (using JSON scores) for chain A (or the first chain) alphafold contacts last-opened &/A name model_4_af_contacts_$2 # Create pseudobonds for the contacts and label them with residue names and numbers. sel last-opened&pbonds label sel pseudobonds text "{0.atoms[0].residue.name} {0.atoms[0].residue.number} to {0.atoms[1].residue.name} {0.atoms[1].residue.number}" # Save the pseudobond representation to a file. save $1/af_contacts_model_4_$2.txt format pseudobonds sel true echo "AlphaFold contacts (derived from JSON file) saved to $1/af_contacts_model_4_$2.txt" # Select interface residues using the interfaces command. interfaces select last-opened&/A contacting last-opened&~/A bothSides true # Create a named selection for the interface residues. name frozen interface_residues$2_model_4 sel show interface_residues$2_model_4 style interface_residues$2_model_4 ball # Save interface residue info to a file in the input directory. info residues interface_residues$2_model_4 saveFile $1/interface_residues$2_model_4_buriedArea_300.txt # Color the model for clarity. rainbow last-opened chains palette bupu color byhetero echo "Interface residues saved in named selection interface_residues$2_model_4 and info saved to $1/interface_residues$2_model_4_buriedArea_300.txt" ##### Model 3 ##### # Open the structure and its JSON scores for model 3. open $1/*model_3*.cif open $1/*data_3*.json structure last-opened hide show c # Generate AF contacts. alphafold contacts last-opened &/A # Create pseudobonds and label them. sel last-opened&pbonds label sel pseudobonds text "{0.atoms[0].residue.name} {0.atoms[0].residue.number} to {0.atoms[1].residue.name} {0.atoms[1].residue.number}" # Save the pseudobond representation. save $1/af_contacts_model_3_$2.txt format pseudobonds sel true echo "AlphaFold contacts (derived from JSON file) saved to $1/af_contacts_model_3_$2.txt" # Select interface residues using the interfaces command. interfaces select last-opened&/A contacting last-opened&~/A bothSides true # Create a named selection. name frozen interface_residues$2_model_3 sel show interface_residues$2_model_3 style interface_residues$2_model_3 ball # Save interface residue info to a file in the input directory. info residues interface_residues$2_model_3 saveFile $1/interface_residues$2_model_3_buriedArea_300.txt # Color the model. rainbow last-opened chains palette bupu color byhetero echo "Interface residues saved in named selection interface_residues$2_model_3 and info saved to $1/interface_residues$2_model_3_buriedArea_300.txt" ##### Model 2 ##### # Open the structure and its JSON scores for model 2. open $1/*model_2*.cif open $1/*data_2*.json structure last-opened hide show c # Generate AF contacts. alphafold contacts last-opened &/A # Create pseudobonds and label them. sel last-opened&pbonds label sel pseudobonds text "{0.atoms[0].residue.name} {0.atoms[0].residue.number} to {0.atoms[1].residue.name} {0.atoms[1].residue.number}" # Save the pseudobond representation. save $1/af_contacts_model_2_$2.txt format pseudobonds sel true echo "AlphaFold contacts (derived from JSON file) saved to $1/af_contacts_model_2_$2.txt" # Select interface residues using the interfaces command. interfaces select last-opened&/A contacting last-opened&~/A bothSides true # Create a named selection. name frozen interface_residues$2_model_2 sel show interface_residues$2_model_2 style interface_residues$2_model_2 ball # Save interface residue info to a file in the input directory. info residues interface_residues$2_model_2 saveFile $1/interface_residues$2_model_2_buriedArea_300.txt # Color the model. rainbow last-opened chains palette bupu color byhetero echo "Interface residues saved in named selection interface_residues$2_model_2 and info saved to $1/interface_residues$2_model_2_buriedArea_300.txt" ##### Model 1 ##### # Open the structure and its JSON scores for model 1. open $1/*model_1*.cif open $1/*data_1*.json structure last-opened hide show c # Generate AF contacts. alphafold contacts last-opened &/A # Create pseudobonds and label them. sel last-opened&pbonds label sel pseudobonds text "{0.atoms[0].residue.name} {0.atoms[0].residue.number} to {0.atoms[1].residue.name} {0.atoms[1].residue.number}" # Select interface residues using the interfaces command. interfaces select last-opened&/A contacting last-opened&~/A bothSides true # Create a named selection. name frozen interface_residues$2_model_1 sel show interface_residues$2_model_1 style interface_residues$2_model_1 ball # Save interface residue info to a file in the input directory. info residues interface_residues$2_model_1 saveFile $1/interface_residues$2_model_1_buriedArea_300.txt # Color the model. rainbow last-opened chains palette bupu color byhetero echo "Interface residues saved in named selection interface_residues$2_model_1 and info saved to $1/interface_residues$2_model_1_buriedArea_300.txt" ##### Model 0 ##### # Open the structure and its JSON scores for model 0. open $1/*model_0*.cif open $1/*data_0*.json structure last-opened hide show c # Generate AF contacts. alphafold contacts last-opened &/A # Create pseudobonds and label them. sel last-opened&pbonds label sel pseudobonds text "{0.atoms[0].residue.name} {0.atoms[0].residue.number} to {0.atoms[1].residue.name} {0.atoms[1].residue.number}" # Save the pseudobond representation. save $1/af_contacts_model_0_$2.txt format pseudobonds sel true echo "AlphaFold contacts (derived from JSON file) saved to $1/af_contacts_model_0_$2.txt" # Select interface residues using the interfaces command. interfaces select last-opened&/A contacting last-opened&~/A bothSides true # Create a named selection. name frozen interface_residues$2_model_0 sel show interface_residues$2_model_0 style interface_residues$2_model_0 ball # Save interface residue info to a file in the input directory. info residues interface_residues$2_model_0 saveFile $1/interface_residues$2_model_0_buriedArea_300.txt # Color the model. rainbow last-opened chains palette bupu color byhetero echo "Interface residues saved in named selection interface_residues$2_model_0 and info saved to $1/interface_residues$2_model_0_buriedArea_300.txt" ##### Final Steps ##### # Move all models (except the last-opened) to a common group (optional) mm #*&~last-opened&/A to last-opened&/A # Create an mseries slider for the five models. mseries slider #1-5 title $2 name $2_slider mseries #1-5 echo "Use the slider to go through the models!" echo "Pairwise contacts (based on the JSON fle) and all residues involved in an interface (based on a buried surface are of 300 Angstrom or more) have been saved in the input folder for each prediction" echo "You might want to increase stringency by calcualting the overlap between all predictions"

2 1

Getting two color keys in the same ChimeraX session
by Elaine Meng 03 Feb '25

03 Feb '25

> Begin forwarded message: > > From: Eric Pettersen via Chimera-users <chimera-users(a)cgl.ucsf.edu> > Subject: [Chimera-users] Re: key command > Date: February 3, 2025 at 11:52:12 AM PST > To: Fabian Glaser <fglaser(a)technion.ac.il> > Cc: Chimera BB <chimera-users(a)cgl.ucsf.edu> > Reply-To: chimera-users(a)cgl.ucsf.edu, Eric Pettersen <pett(a)cgl.ucsf.edu> > > Hi Fabian, > There is no direct support for multiple keys, but it is pretty easy to “trick” ChimeraX into showing multiple keys. You would create your first key normally, getting it exactly the way you want it to look before creating the next key. You create the next key with the following Python code: > > from chimerax.color_key.model import ColorKeyModel > m = ColorKeyModel(session) > > If the above was in a file ending in ‘.py’, you could just use the ‘open’ command to run it and create the key. I’ve attached a file with that code in it for convenience. Once you have created the key, then all operations that affects keys (like the ‘key’ command) will affect the new key and leave the original key as is. If you had the Color Key tool up, it will continue to show the old values. Just close it and re-open it to show the new values. > > --Eric > > Eric Pettersen > UCSF Computer Graphics Lab > > >> On Feb 3, 2025, at 6:31 AM, Fabian Glaser via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: >> >> Hi, >> >> We would be interested to add more than one key color bar in the same chimerax session. But we noticed the key command allows only one color key can be present at a time. >> >> Is there a way to add more than one color key in the same session? >> >> Thanks a lot, >> >> Fabian >> >> >> Fabian Glaser, PhD >> >> Technion Centre for Structural Biology (TCSB), Computational Section, Head >> Technion Human Health Initiative (THHI) >> Technion - Israel Institute of Technology, Haifa, Israel >> fglaser(a)technion.ac.il >> +972 (0)48293701 >> >> >> >> _______________________________________________ >> Chimera-users mailing list -- chimera-users(a)cgl.ucsf.edu >> To unsubscribe send an email to chimera-users-leave(a)cgl.ucsf.edu >> Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimera-users@cgl.ucsf.edu/ > > _______________________________________________ > Chimera-users mailing list -- chimera-users(a)cgl.ucsf.edu > To unsubscribe send an email to chimera-users-leave(a)cgl.ucsf.edu > Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimera-users@cgl.ucsf.edu/

1 0

Grid mode and multiple viewports
by Roden Deng Luo 03 Feb '25

03 Feb '25

Hi, I find there is a `tile` command. After I enter the tile mode, the zoom is global. I guess `tile` is implemented by transforming the active models in the global scene explicitly. I wonder if there is a way to have the zoom independent for each model, similar to the grid mode in PyMol. A further question, more from a developer's perspective, is whether having multiple 3D rendering viewports in ChimeraX is possible. I imagine each viewport can have its own active models in the scene and its own camera. Different cameras and other operations might be synced upon users' request. This video (https://youtu.be/7KZ1P-nPav8?si=Z1hiBBuRiWop2WFC) demos the feature (in an old version of Houdini). Thanks, Roden -- This message and its contents, including attachments are intended solely for the original recipient. If you are not the intended recipient or have received this message in error, please notify me immediately and delete this message from your computer system. Any unauthorized use or distribution is prohibited. Please consider the environment before printing this email.

4 8