- ChimeraX-users - RBVI Mailing Lists

Help saving a modified protein for 3d print
by Jana Villemain 24 Feb '24

24 Feb '24

Greetings, I have downloaded the attached .pdb. Also attached is a screenshot of same model, but sliced specifically at histidine 65. I need to export the edited file, sliced, as an .stl so that I can print it. However, try as I might, every time I save, or export the file, it is unedited - and includes the entire model. Any help you could provide would be great! [cid:image001.png@01DA667E.93B731E0] Thank you, Jana Jana Villemain, Ph.D. Associate Professor of Chemistry Dept. of Chemistry, Biochemistry, Physics and Engineering Indiana University of Pennsylvania Weyandt Hall 239D jvillema(a)iup.edu 724-357-2180

3 2

ChimeraX Core module Issue
by Himal Godage 24 Feb '24

24 Feb '24

Dear ChimeraX Dev Team, I am currently in the process of developing a bundle for ChimeraX. I have clone the code from the git repository and made the necessary installations according to the documentation. But I have an issue with the location of the ChimeraX core module. I found that it's in the *ChimeraX > src > bundles > core > src* . But in most of the bundle codes it's located as a *chimerax.core * which gives me errors (screenshot is attached). Do I have to change the path to the above mentioned path or is there any other way I can locate the core module? Thank you Best regards Himal Godage

2 1

Question regarding licensing
by Brandon Benson 22 Feb '24

22 Feb '24

Hello, I'm Brandon Benson and work in IT supporting the colleges of Engineering and Science. We would like to use your software on campus. To do so, we have to fill out some information and have the licensing agreement approved by our legal team and info sec teams. Who would be a point of contact that I can use for this? Thanks, Brandon B -- Brandon Benson Client Support Analyst Engineering and Science Computing University of Notre Dame

2 1

Is there a way to reset memory?
by David Flesher 22 Feb '24

22 Feb '24

Hi ChimeraX team, I've been writing a script to run within ChimeraX and, as I continue to run the script, the system memory quickly fills up to my system maximum (32 GB). Is there a way to refresh/dump the memory within ChimeraX? My script creates markers but deletes them with every iteration, which I thought would keep memory in check. Please let me know if you have any advice, thank you! Best regards, :David

2 3

Saving volumes from volume morphs
by y.zeng＠victorchang.edu.au 22 Feb '24

22 Feb '24

Hi, I wanted to ask if there is a way to save each frame of a volume morph through the command line, or if a feature like this could be added? I would like to use each frame of the volume morph series (as .mrc) to export into an external program, but the only way I've found at the moment is to manually change each frame in the morph slider then save that frame. It doesn't appear there is the same coordset slider functionality of the volume morph slider for atomic models, which would be really handy in my situation if the morph has lots of steps. Many thanks Jack

3 3

Image as the background
by Enrico Martinez 21 Feb '24

21 Feb '24

Dear ChimeraX users! I'm wondering if it's possible to set the custom image as the background in a Chimera-x session in the same way as in the Chimera? If it's not possible, will this feature be included in future versions of Chimera-X? Many thanks in advance Enrico

2 2

Seeking Assistance with PyCharm Debugging Configuration
by himalgodage2759＠gmail.com 21 Feb '24

21 Feb '24

Dear ChimeraX Dev Team, I'm Himal Godage, and I am currently in the process of developing a bundle for ChimeraX software. I have been thoroughly following the provided documentation, successfully completing the steps related to setting up a ChimeraX development environment, obtaining the code, and compiling ChimeraX. However, I have encountered a challenge in the IDEs, Debugging, and Profiling section, specifically within PyCharm. Following the provided steps, I am instructed to: 1. Create a new Run/Debug Configuration. 2. Set the script path field to point at a module. 3. Set the module to “chimerax.core”. 4. Set the Python interpreter to ChimeraX’s internal Python. 5. Uncheck “Add content roots to PYTHONPATH”. 6. Uncheck “Add source roots to PYTHONPATH”. While attempting to follow these instructions, I encountered difficulty in locating the "chimerax.core" module. Unfortunately, the provided directory structure or module seems to be difficult to find in my current project. However there is a module named core in the following path. ChimeraX > src > bundles > core I am reaching out to seek your guidance on resolving this issue. Could you please provide insights on how I can locate or create the necessary "chimerax.core" module or suggest an alternative approach to address this problem? Thank you in advance for your time and support. Best regards, Himal Godage himalgodage2759(a)gmail.com

3 2

Ending a beta strand depiction
by Noam Prywes 20 Feb '24

20 Feb '24

Hi, I'm trying to make an image where I've clipped a bunch of beta strands that together form a barrel. I want to have them end simply as arrows rather than continuing to show that small remaining tube of the subsequent loop. Any advice? Thanks! Noam Prywes UC Berkeley [image: Screenshot 2024-02-20 at 8.09.47 AM.png]

2 2

BUG: Individual change ball&stick does not work
by Christian Tüting 19 Feb '24

19 Feb '24

Dear ChimeraX dev team, I found an issue with the styling of the ball&stick representation in ChimeraX. Here is a code snipplet to see the issue: # load a random model and show two residues open 7ott hide cartoons show #1:283-284 atoms style #1:283-284 ball # this worked size #1:283 stickRadius 0.1 size #1:284 stickRadius 0.25 # this does not work size #1:283 ballScale 0.4 size #1:284 ballScale 0.1 The ballScale value is not applied on the selection like the stickRadius, but is always applied globally. I am running the latest daily build (1.8.dev202402162121 (2024-02-16 21:21:18 UTC)) on MacOS. Best Christian

2 1

Surface color by homology
by Pedro Bule 17 Feb '24

17 Feb '24

Hello, I am trying to color the surface of my model according to sequence conservation. I opened the MSA, associated the proper sequence with the chain I wish to color, and then used the command "color byattr seq_conservation". But this results in the colors not blending at the surface, which is not very pleasant looking. Is there a way to make the transitions between adjacent colors smoother, similar to when we color the surface, for e.g., by electrostatic potential? In legacy chimera I used to follow the "Structure... Render by Conservation" in the Multalign Viewer and then choose the attribute mavConservation, which used to do the trick Thanks in advance! Pedro Bule -- *Pedro Bule* *Assistant Professor* GLYCOBIOLOGY AND STRUCTURAL ENZYMOLOGY LAB *P:* (+351) 21 365 28 84 // 431379 | pedrobule(a)fmv.ulisboa.pt <email(a)fmv.ulisboa.pt> *Centro de Investigação Interdisciplinar em Sanidade Animal* Faculdade de Medicina Veterinária Av. Universidade Técnica | 1300-477 Lisboa | PORTUGAL

3 5

Question about aligning sequence to structure
by Rebekah Dyer 16 Feb '24

16 Feb '24

Hello, I'm wondering if there's a way to do the following with ChimeraX: 1. Open structure with associated sequence (seqA) 2. Open a separate sequence file (seqB) with no associated structure 3. Align seqB to seqA 4. Color residues on structure of seqA protein by conservation between seqA and B I've managed to complete steps 1 and 2, but am stuck on step 3. Any help or advice would be greatly appreciated! Best, Rebekah Dyer, Ph.D. (she/her) Staff Enzyme Scientist | Dexcom<https://www.dexcom.com/en-us> 6350 Sequence Dr. | San Diego, CA, 92121

2 1

Swissdock
by Gabriel López Velázquez 15 Feb '24

15 Feb '24

What to do if ChimeraX software doesn't recognise the .chimerax file downloaded from SwissDock after docking? Gabriel

2 2

Size of side chains
by Binh Nguyen 14 Feb '24

14 Feb '24

Dear all, Is there a command to make the side chains smaller? Here is what I got: [cid:de6b4361-2537-4331-beb5-0571611bebe4] And I wish to have this using chimeraX: [cid:4dc1c6e4-62b3-4eb5-b350-227da1b7821c] Thanks, B ________________________________ UT Southwestern Medical Center The future of medicine, today.

2 2

Save docked tool size?
by Guillaume Gaullier 14 Feb '24

14 Feb '24

Hello chimerax-users, I recently started using ChimeraX in more custom ways for specific analyses, for which I need several tools displayed at once. I need some docked and others floating. So the "Save tool position" option is very helpful. However, it saves window size only for floating tools, not docked ones, so I have to resize the docked tools at every restart (their position is saved correctly, but not their size relative to the main ChimeraX window). This happens for the model panel and log, that I have docked to the right of the 3D display: they systematically start much wider than I want (and than I resized them to last time I started ChimeraX). This doesn't happen for a custom button panel that I have docked to the right of the toolbar (but maybe because the command file generating the panel sets a fixed size explicitly?). I have not checked whether this happens with other tools. Is this normal behavior? If so, is there any way I can make docked tools remember not only their position but also their size? A quick search in the documentation didn't answer this question. Thank you, Guillaume När du har kontakt med oss på Uppsala universitet med e-post så innebär det att vi behandlar dina personuppgifter. För att läsa mer om hur vi gör det kan du läsa här: http://www.uu.se/om-uu/dataskydd-personuppgifter/ E-mailing Uppsala University means that we will process your personal data. For more information on how this is performed, please read here: http://www.uu.se/en/about-uu/data-protection-policy

2 2

Feature request; sort by last time file was modified in save window
by m.c.feasey2＠newcastle.ac.uk 12 Feb '24

12 Feb '24

The content of this message was lost. It was probably cross-posted to multiple lists and previously handled on another list.

4 7

Chimera Script
by Dixson, Jamie 12 Feb '24

12 Feb '24

Hello, I would like to use the Matchmaker comparison in ChimeraX (specifically the 'across all' RMSD value given) to compare 10,000+ structures so I would like to incorporate it into a python script in a jupyter notebook. I am very familiar with scripting with python in jupyter notebooks but I am not as familiar with getting two scripts to work together as appears to be needed to use matchmaker in an existing jupyter script. The script I am attempting to use is found below. I wrote it following some of the guidance in your documentation. ``` #Chimera Command Line import chimera import os from chimera import runCommand as rc # use 'rc' as shorthand for runCommand from chimera import replyobj # for emitting status messages file1='C:/Users/jamie/Downloads/temppdb1.pdb' file2='C:/Users/jamie/Downloads/temppdb2.pdb' structure1=rc("open " + file1) structure2=rc("open " + file2) rc("mmaker structure1 structure2") ``` I get the error 'No chimera module' I try to install chimera using 'pip install chimera' and it won't install. Can you offer any guidance on getting this to work? Best, Jamie Dixson

2 2

Automatisation of the movie record / encode
by Enrico Martinez 11 Feb '24

11 Feb '24

Dear Chimera-X users! Typically when I load multi model pdb using open coordset true I may record my movie automatically using the context menu. I need to script this process selecting the resolution and the quality of the encoding using movie record size 3840,2160 supersample 3 movie encode format h264 quality highest output ./my_movie.mp4 The only problem is that when I type the first command it asks me to "play" and then "stop" the pdb ensemble for the number of frames which should be present in the resulting video. Is it possible to define in the scipr that the movie should take the selected number of frames in the selected range and then automatically start to encode the movie ? Many thanks in advance Enrico

3 2

Setting transparency for multi-frame PDB
by Enrico Martinez 09 Feb '24

09 Feb '24

Dear ChimeraX users! I am working on visualization of protein-ligand complex from MD trajectory loaded as multiframe pdb via open coordset true Here is my script: #coloring ligand options color ligand & C gold style ligand sphere #transparency surface protein color byattribute kdh protein target rs palette sandybrown:coral:orangered novalue gray transparency protein 5 surfaces select zone ligand 4 protein transparency sel 55 surface The problem is only in the transparency which could be set only on the first frame but then disappears when I browse movie. How could I modify my scipr to keep the transparency on all frames ? Many thanks in advance ! Enrico

2 6

Surface representation for small compounds
by Enrico Martinez 09 Feb '24

09 Feb '24

Dear ChimeraX users I am also experimenting on the representation of the surfaces of small compounds surface ligand gridSpacing 0.5 probeRadius 1.2 color ligand white target s transparency 90 This creates a relatively large transparent surface around the small compound. How would it be possible to reduce the volume of the surface ? Also I did not understand how to change the style of the surface among dot/mesh etc since adding style dot did not work. I would appreciate any further creative examples of how to change the representation of a small compound in the case when I need to make it more "coarse-graining" , hiding some precise details of the structure ? Many thanks in advance ! Enrico

2 6

Colour patterns for ligand atoms
by Enrico Martinez 09 Feb '24

09 Feb '24

Dear ChimeraX users ! I am experimenting with some unusual coloring of the ligand atoms represented as balls and sticks. the following commands color ligand atoms: size ligand atomRadius +3.0 color ligand & C gold target a color ligand goldenrod target a However, the following command does not work w/o any error message rainbow ligand & C palette cornflowerblue:red:gold target a I've also tried without any success. style ligand ball ringFill off rainbow ligand & C palette cornflowerblue:red:gold target f Any additional suggestions e.g. for the situation when I would like to alternate the colors for the ligand atoms in a regular fashion : e.g. the first atom white, the first black, the third white, the forth black etc ? Many thanks in advance ! Cheers Enrico

2 2

Llama2 cannot be used as an alternative to the mailing list
by Pranav Shah 09 Feb '24

09 Feb '24

As the subject states. (see attached image for context) So thank you Elaine (and rest of the CX team) for your tireless and infinite capacity to support users! :) Best, Pranav -- Pranav Shah Postdoctoral Research Fellow. Division of Structural Biology, Wellcome Trust Centre for Human Genetics, University of Oxford, Roosevelt Drive, Oxford OX3 7BN, UK

2 1

Fourier transformation of the 3D volume
by Dmitry Semchonok 08 Feb '24

08 Feb '24

Dear colleagues, How to get the Fourier transformation of the 3D volume? thank you. Kind regards, Dmitry

2 1

Re: ChimeraX: AlphaFold data saving help
by Tom Goddard 06 Feb '24

06 Feb '24

Hi Tony, Good. I didn't see the sleep issue mentioned in our ChimeraX documentation. We'll add that. Tom > On Feb 6, 2024, at 2:35 PM, Anthony Newcombe <ant.newcombe(a)gmail.com> wrote: > > Ah ok thanks Tom! > > My PC does go into sleep mode, I'll turn this off and try again! > > Many thanks for the help > > Best wishes > > Tony > > Anthony Newcombe > Brook Lodge > Lisnacunna > Ballinascarthy > Clonakilty > Cork > > On Tue, Feb 6, 2024 at 10:25 PM Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> wrote: >> Hi Tony, >> >> If you let your computer sleep when the ChimeraX AlphaFold job is run on Google Colab it will probably lose the results. Google intends Colab to be for interactive use. So I suggest setting your computer not to sleep when running a prediction. There is more discussion of AlphaFold prediction not downloading on the ChimeraX mailing list >> >> https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu… >> >> including how you can get the results if Google Colab has not closed the session and deleted them (happens within a few hours). >> >> Tom >> >> >>> On Feb 6, 2024, at 5:57 AM, Anthony Newcombe via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >>> >>> Hello ChimeraX team >>> >>> I am evaluating ChimeraX (non-commercial use) but have an issue you may be able to help with. When I run a structure prediction: >>> >>> Tools > structure prediction > AlphaFold >>> >>> I enter two primary sequences and hit ‘predict’ >>> >>> The simulation completes, but nothing opens in ChimeraX, also there is no data saved in the location below. I have tried alternative locations, but no data is saved >>> >>> ~/Downloads/ChimeraX/AlphaFold/prediction_[N] >>> >>> Do you know how I obtain saved predicted results ChimeraX? Do I need a paid service for this? >>> >>> Many thanks >>> >>> Tony >>> >>> Anthony Newcombe >>> Brook Lodge >>> Lisnacunna >>> Ballinascarthy >>> Clonakilty >>> Cork >>> _______________________________________________ >>> ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> >>> To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu <mailto:chimerax-users-leave@cgl.ucsf.edu> >>> Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/ >>

1 0

ChimeraX AlphaFold
by Nadine Hellmold 06 Feb '24

06 Feb '24

Hi dear support team, I am so happy to use AlphaFold directly in ChimeraX and it work's so smooth! Thanks a lot for it. I was wondering what the feature "Use pdb templates when predicting structures" exactly means? I understood it like during the prediction up to 4 templates from pdb database can be used. I used the option for one prediction, for a protein complex prediction with five proteins, and found way more than four templates used for each protein. If the option is switched off, what is used as a template then? Bests Nadine -- NadineHellmold PhD student Department of Environmental Biotechnology | Helmholtz Centre for Environmental Research - UFZ 0341 235-1766 <tel:0341 235-1766> nadine.hellmold(a)ufz.de <mailto:nadine.hellmold@ufz.de> PermoserstraCe 15, 04318 Leipzig, Germany <https://www.hubspot.de/email-signature-generator?utm_source=create-signature>

3 2

ChimeraX: AlphaFold data saving help
by Anthony Newcombe 06 Feb '24

06 Feb '24

Hello ChimeraX team I am evaluating ChimeraX (non-commercial use) but have an issue you may be able to help with. When I run a structure prediction: Tools > structure prediction > AlphaFold I enter two primary sequences and hit ‘predict’ The simulation completes, but nothing opens in ChimeraX, also there is no data saved in the location below. I have tried alternative locations, but no data is saved ~/Downloads/ChimeraX/AlphaFold/prediction_[N] Do you know how I obtain saved predicted results ChimeraX? Do I need a paid service for this? Many thanks Tony Anthony Newcombe Brook Lodge Lisnacunna Ballinascarthy Clonakilty Cork

2 1