- ChimeraX-users - RBVI Mailing Lists

Question about Coulombic electrostatic potential
by Sunisa Yoodee 21 Feb '22

21 Feb '22

Dear UCSF ChimeraX We used the ChimeraX program to calculate electrostatic potential. By using the coulombic command, a molecular surface was generated and colored. However, we also need the electrostatic potential value (kcal/(mol*e))of the protein. Could you please give some advices how to get this value? Best Regards, Sunisa Yoodee -- *Sunisa Yoodee*, Ph.D Medical Proteomics Unit, Faculty of Medicine Siriraj Hospital, Mahidol University, 6th Floor SiMR Building, 2 Wanglang Road, Bangkoknoi, Bangkok 10700, THAILAND Tel: 66-8-06691102 e-mail: yd.sunisa(a)gmail.com

3 3

Define axis tool missing?
by James Hodgkinson-Bean 20 Feb '22

20 Feb '22

Hi I am currently doing some geometric analysis of a protein complex, and was wanting to define certain axis normal to planes I have defined; on the online chimerax documentation there seems to be an option “define axis”, however in my actual chimeraX program, this command doesn’t work, and is not listed under the “help define” command which shows how to define planes and centroids. I am running ChimeraX version 1.3 (2021-12-08), which I downloaded recently. Any assistant would be much appreciated 😊 P.S I absolutely love chimeraX!! It is one of the best pieces of software I’ve ever used. Cheers, James.

2 1

The ChimeraX-Modeller interface
by Ralph Loring 18 Feb '22

18 Feb '22

Hi, The intracellular domain (ICD) of Alpha7 nicotinic receptors, like almost all eukaryotic Cys-loop receptors, is not resolved using X-ray crystallography or cryo-EM. Last week the PDB for an ensemble of NMR ICD structures for the receptor was released (PDB 7RPM). I've been unsuccessfully trying to use ChimeraX and Modeller to make a model of a subunit that includes the ICD. The 7RPM models include all 4 transmembrane domains and the ICD (but lacks the extracellular domain), so there is considerable overlap with the 7KOO PDB fo a7. I started by deleting all but one of the identical subunits in the 7KOO pdb and loaded one of the 7RPM models and tried to use Modeller to make a construct that includes both the extracellular domain and the ICD. Unfortunately, even though both 7KOO and the single 7RPM are in the sequence alignments window, the ChimeraX-Modeller combination ignores the structure that is not chosen as the target (e.g. if 7RPM is the target, there is no extracellular domain, but if 7KOO is the target, there is either no ICD or the ICD that is shown bears no relevance to the structure in 7RPM). I can align the two structures well with a low RMSD using Matchmaker because of the TMDs overlapping. I just want to fill in the missing parts. Is there a special trick to get Modeller to fill in the missing parts using ChimeraX as the interface? I'm not that experienced using Modeller. Thanks, Ralph H. Loring Associate Professor of Pharmacology Department of Pharmaceutical Sciences 166 TF Northeastern University 360 Huntington Avenue Boston, MA 02115 USA 617-373-3216 office 617-373-8886 fax r.loring(a)northeastern.edu

3 10

surfvalues.py
by 始夏谨柘 18 Feb '22

18 Feb '22

      Hello,          This python script was downloaded on UCSF CHIMERA page (https://www.rbvi.ucsf.edu/trac/chimera/attachment/wiki/Scripts/surfvalues.p…) and running it on UCSF CHIMERA X will cause an error. UCSF CHIMERA X (https://rbvi.github.io/chimerax-recipes/) has not found the corresponding script. If I still want to achieve the function of this script (surfvalues.py) , what should I do? I tried that at UCSF CHIMERA, but the volume of the protein is too large for it. Best Wishes,                                                                                                  FAYE

3 2

System Requirements
by Niver, Terry 17 Feb '22

17 Feb '22

Hello, I am attempting to assist a researcher here at the University of Rochester configure a new laptop on which he wants to run ChimeraX. I was trying to locate the system requirements on the website but didn’t have any luck. Would someone be able to send me a list? Thanks, Terry Terry Niver Manager, Research and Academic Information Technology Technical Support University of Rochester School of Medicine and Dentistry E-mail: terry_niver(a)urmc.rochester.edu<mailto:terry_niver@urmc.rochester.edu> Phone: 585-276-5538

2 2

fine tuning depthcue
by vincent Chaptal 17 Feb '22

17 Feb '22

Hi, I've been playing around a lot with depthcue-ing but I can't get it to do quite what I would like. I want to display a protein structure, with a focus on one zone and a "heavy" depthcue to have a strong "fog" hiding much of the background (without deleting the residues in the back). my script includes: lighting full #(sometimes I use soft too) lighting shadows true intensity 0.3 lighting qualityOfShadows finer lighting depthcue true depthCueStart 0.1 depthCueEnd 1.0 First, I have selected one residue and setting the rotation around it by using "cofr sel" My max depthcue is with "depthCueStart 0.1 depthCueEnd 1.0". I've tried to change these numbers in many different ways, including negative or very large numbers) but I can't get it to be thicker. Could you help me please. I missed the meaning of these values, so I'm blind on their use. Thank you Vincent -- Vincent Chaptal, PhD Director of GdR APPICOM Drug Resistance and Membrane Proteins Lab MMSB -UMR5086 7 passage du Vercors 69007 LYON FRANCE +33 4 37 65 29 01 http://www.appicom.cnrs.fr http://mmsb.cnrs.fr/en/

2 2

Re: [chimerax-users] VR Support
by Jessie Lopez 16 Feb '22

16 Feb '22

I am writing an article promoting the use of VR for modelling. I use an HTC Vive to access ChimeraX VR, but I have heard rumours it will be discontinued soon. The Samsung Odyssey is already discontinued. With Meta dominating the VR headset market, many companies are bailing out. Do you have any recommendations about which headsets should scientists invest in if they want to use ChimeraX? Thank you! -. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. .-. . ||*\*|||*\* /|||*\*|||*\* /|||*\*|||*\* /|||*\*|||*\* /|||*\*|||*\* /|||*\*|||*\* /| |/ *\*|||*\*|||/ *\*|||*\*|||/ *\*|||*\*|||/ *\*|||*\*|||/ *\*|||*\*|||/ *\*|||*\*|| ~ `-~ `-` `-~ `-` `-~ `-~ `-~ `-` `-~ `-` `-~ `- *Jessie MNG Lopez Suzuki* PhD Candidate, Molecular, Cell and Developmental Biology *Zahler Laboratory* The Center for Molecular Biology of RNA University of California, Santa Cruz Sinsheimer 419 (831) 459-5127 *jlopez99(a)ucsc.edu <jlopez99(a)ucsc.edu>* (they, she or he pronouns)

3 4

Re: [chimerax-users] Error reported by AlphaFold
by Tom Goddard 16 Feb '22

16 Feb '22

Hi Juntao, Yes, ChimeraX AlphaFold on Google Colab only handles about 1000 amino acids before running out of memory on the 5 year old GPUs (e.g. P100, K80, T4) with 16 Gbytes of GPU memory that they provide. This is a limitation of AlphaFold. Your 1500 amino acids would run fine on an Nvidia RTX 3090 GPU which has 24 Gbytes, or on higher-end GPUs like an Nvidia A40 with 48 Gbytes. These sequence size limits are a significant limitation of AlphaFold. Here is a web page I made showing AlphaFold runs that failed and succeeded and the largest sequences that worked in these tests on Colab was ~1100 residues, on an RTX 3090 it managed 2100 residues and on an A40 it got up to 3700 residues. https://www.rbvi.ucsf.edu/chimerax/data/alphafold-jan2022/afspeed.html Tom > On Feb 16, 2022, at 6:56 AM, Juntao Yu <juntao_yu(a)g.harvard.edu> wrote: > > Hi Tom, > > Thank you for your email. I checked the log and realized the failure was indeed because of out of memory on Google Colab. The protein complex is about 1500 amino acids large so probably that is the reason. It’s good to know that it might take lots of memory for alphaFold to calculate large complexes. I will try to run the prediction on our clusters or lab computers with GPU instead then. Thank you. > > Best, > Juntao

1 0

alphafold block
by Roberto Marabini 15 Feb '22

15 Feb '22

Hi, I would like to write a script that executes "alphafold predict SEQUENCE" and then postprocess the results. The script would be similar to: from chimerax.core.commands import run run(session, "alphafold predict %s" % sequence_data) # wait until alphafold is done # and postprocess the file best_model.pdb but I do not know how to implement the part "wait until alphafold is done" if, after launching alphafold, I create a loop similar to: === counter = 0 current_size = _getSize(file_path) while current_size !=_getSize(file_path) or _getSize(file_path)==0 or not os.path.exists(file_path): current_size =_getSize(file_path) time.sleep(60) counter += 1 if counter > 240: # break after four hours if file is not created break ==== the loop is executed as soon as the alphafold command has been sent to google, the alphafold-colab window is not shown until the loop is finished and therefore, alphafold execution never starts. So the question is: how can I write a script that waits until the command "alphafold predict ..." finishes and then executes some code. Thanks Roberto

3 3

Re: [chimerax-users] error with open :: 'foreach' has no suffix
by Eric Pettersen 15 Feb '22

15 Feb '22

Yes, that was quite helpful. The 'foreach' option only became available starting with the 1.3 release. You are running 1.2.5, so you need to upgrade. --Eric > On Feb 14, 2022, at 3:35 PM, Rangarajan, Amith <Amith.Rangarajan(a)ucsf.edu> wrote: > > This Message Is From an External Sender > This message came from outside your organization. > hi Eric, > > i have submitted a bug report > > > thanks > amith > From: Eric Pettersen <pett(a)cgl.ucsf.edu <mailto:pett@cgl.ucsf.edu>> > Sent: Monday, February 14, 2022 3:15 PM > To: Rangarajan, Amith <Amith.Rangarajan(a)ucsf.edu <mailto:Amith.Rangarajan@ucsf.edu>> > Cc: ChimeraX Users Help <ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu>> > Subject: Re: [chimerax-users] error with open :: 'foreach' has no suffix > > This Message Is From an External Sender > This message came from outside your organization. > Hi Amith, > I don't care so much about the contents of your script per se — I'd like to see the contents of the log when the error occurs. Do this: run the command that generates the "'foreach' has no suffix" error and then use Help→Report A Bug and submit a bug report. That will include the contents of the log, which is what I need to see. Thanks! > > --Eric > >> On Feb 10, 2022, at 4:52 AM, Rangarajan, Amith <Amith.Rangarajan(a)ucsf.edu <mailto:Amith.Rangarajan@ucsf.edu>> wrote: >> >> This Message Is From an External Sender >> This message came from outside your organization. >> Dear Tom and Eric, >> >> I used notepad ++ to make sure that the cxc file was not a .txt ( i am on windows) and i am still getting the error ( foreach has no suffix) . i have attached my .cxc script . >> >> I am trying to read a set of .mae files and write a log file with RMSD and some distance measurements. >> >> I am new to chimera and would benefit a lot from your review of my script and possible fixes for this issue. >> >> thank a lot for your time. >> >> best regards, >> amith >> From: Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> >> Sent: Tuesday, February 8, 2022 10:36 AM >> To: PETTERSEN, ERIC <pett(a)cgl.ucsf.edu <mailto:pett@cgl.ucsf.edu>> >> Cc: Rangarajan, Amith <Amith.Rangarajan(a)ucsf.edu <mailto:Amith.Rangarajan@ucsf.edu>> >> Subject: Re: [chimerax-users] error with open :: 'foreach' has no suffix >> >> This Message Is From an External Sender >> This message came from outside your organization. >> Hi Eric, >> >> Not quite sure I understand your theory abut Amith's error. In current ChimeraX daily build using non-existent files with open command >> >> open something.cxc foreach somethingelse.py >> > No such file/path: something.cxc >> >> gives a very sensible error message and does not try to interpret "foreach" as a file name. >> >> Tom >> >>> On Feb 8, 2022, at 9:40 AM, Eric Pettersen via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >>> >>> Hi Amith, >>> That error message indicates to me that the first file name (script.cxc) isn't being recognized as a ChimeraX command script file. So take a hard look at the command you typed and make sure that the suffix for that file is ".cxc" and not something mistyped like ".cxs" or whatnot. >>> >>> --Eric >>> >>> Eric Pettersen >>> UCSF Computer Graphics Lab >>> >>> >>>> On Feb 8, 2022, at 6:25 AM, Rangarajan, Amith via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >>>> >>>> This Message Is From an External Sender >>>> This message came from outside your organization. >>>> Hi, >>>> >>>> I am trying to run a script and want to use foreach ( open script.cxc foreach *.pdb) to iterate through several pdb files in the working directory. >>>> >>>> I had no issues with running it earlier, but since last few tries, i am getting an error stating that ""'foreach' has no suffix"" >>>> >>>> I am not able to figure out how to debug this. >>>> >>>> I am using the latest build of chimerax. >>>> >>>> I will highly appreciate your suggestions on fixing this. >>>> >>>> best >>>> amith >>>> _______________________________________________ >>>> ChimeraX-users mailing list >>>> ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> >>>> Manage subscription: >>>> https://plato.cgl.ucsf.edu/mailman/listinfo/chimerax-users <https://plato.cgl.ucsf.edu/mailman/listinfo/chimerax-users> >>> _______________________________________________ >>> ChimeraX-users mailing list >>> ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> >>> Manage subscription: >>> https://plato.cgl.ucsf.edu/mailman/listinfo/chimerax-users <https://plato.cgl.ucsf.edu/mailman/listinfo/chimerax-users> >> <RMSD-distance-final.cxc>

2 1

Re: [chimerax-users] error with open :: 'foreach' has no suffix
by Rangarajan, Amith 14 Feb '22

14 Feb '22

Dear Tom and Eric, I used notepad ++ to make sure that the cxc file was not a .txt ( i am on windows) and i am still getting the error ( foreach has no suffix) . i have attached my .cxc script . I am trying to read a set of .mae files and write a log file with RMSD and some distance measurements. I am new to chimera and would benefit a lot from your review of my script and possible fixes for this issue. thank a lot for your time. best regards, amith ________________________________ From: Tom Goddard <goddard(a)sonic.net> Sent: Tuesday, February 8, 2022 10:36 AM To: PETTERSEN, ERIC <pett(a)cgl.ucsf.edu> Cc: Rangarajan, Amith <Amith.Rangarajan(a)ucsf.edu> Subject: Re: [chimerax-users] error with open :: 'foreach' has no suffix Hi Eric, Not quite sure I understand your theory abut Amith's error. In current ChimeraX daily build using non-existent files with open command open something.cxc foreach somethingelse.py > No such file/path: something.cxc ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ‍ ZjQcmQRYFpfptBannerStart This Message Is From an External Sender This message came from outside your organization. ZjQcmQRYFpfptBannerEnd Hi Eric, Not quite sure I understand your theory abut Amith's error. In current ChimeraX daily build using non-existent files with open command open something.cxc foreach somethingelse.py > No such file/path: something.cxc gives a very sensible error message and does not try to interpret "foreach" as a file name. Tom On Feb 8, 2022, at 9:40 AM, Eric Pettersen via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu<mailto:chimerax-users@cgl.ucsf.edu>> wrote: Hi Amith, That error message indicates to me that the first file name (script.cxc) isn't being recognized as a ChimeraX command script file. So take a hard look at the command you typed and make sure that the suffix for that file is ".cxc" and not something mistyped like ".cxs" or whatnot. --Eric Eric Pettersen UCSF Computer Graphics Lab On Feb 8, 2022, at 6:25 AM, Rangarajan, Amith via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu<mailto:chimerax-users@cgl.ucsf.edu>> wrote: This Message Is From an External Sender This message came from outside your organization. Hi, I am trying to run a script and want to use foreach ( open script.cxc foreach *.pdb) to iterate through several pdb files in the working directory. I had no issues with running it earlier, but since last few tries, i am getting an error stating that ""'foreach' has no suffix"" I am not able to figure out how to debug this. I am using the latest build of chimerax. I will highly appreciate your suggestions on fixing this. best amith _______________________________________________ ChimeraX-users mailing list ChimeraX-users(a)cgl.ucsf.edu<mailto:ChimeraX-users@cgl.ucsf.edu> Manage subscription: https://plato.cgl.ucsf.edu/mailman/listinfo/chimerax-users _______________________________________________ ChimeraX-users mailing list ChimeraX-users(a)cgl.ucsf.edu<mailto:ChimeraX-users@cgl.ucsf.edu> Manage subscription: https://plato.cgl.ucsf.edu/mailman/listinfo/chimerax-users

2 1

Models panel selecting
by William Hofsøy 14 Feb '22

14 Feb '22

Hi, The checkboxes for selecting models in the "Models" panel can't select multiple models without first selecting their parent model and then unchecking all the other models. So I would like to request that it would be possible to select multiple models somehow, either shift clicking or maybe just by default as is what I would expect from them being checkboxes. Best Regards, William

2 1

Error reported by AlphaFold
by Juntao Yu 14 Feb '22

14 Feb '22

Dear ChimeraX community, I am a graduate student from Harvard Medical School who recently became interested in using AlphaFold-Multimer to predict protein complex structures of my interest. I have been tried a few times of predicting one protein complex and I was able to finish all MSA. However, when AlphaFold starts predicting the structure, all five models were reported as “error”. It is surprising to me because it is known that these two proteins should form a complex. I noticed in the script on the line is: “print ('\nAlphaFold generated an error computing %s, error logged to %s\n'% (model_name, error_log_path))”. The results printed exactly what this line says. I am wondering whether it means the Multimer is not able to predict this complex structure? Is there any tutorial that I can find to change parameters in order to try to improve and get a structure? Thanks, Juntao ------------------------------------------ Juntao Yu | Ph.D. candidate Moazed Lab Department of Cell Biology Harvard Medical School 240 Longwood Avenue Boston, MA 02115

2 1

Issues with download
by Clara Kjerfve 14 Feb '22

14 Feb '22

Hello, I have downloaded the updated daily version of your software but am unable to open the app. I have updated to the newest software and still not able to open it. Can you please send me some steps on how to proceed. Thank you. Clara Kjerfve

2 1

color submodels using a palette
by vincent Chaptal 14 Feb '22

14 Feb '22

Dear all, I have a pdb with 20 submodels inside (NMR type) that opens well in chimeraX. I would like to color each submodels individually, using a palette accross these models. For example from model #1.1 in red to model #1.20 in blue. I couldn't find the command online, does it exist in ChimeraX? Thank you Vincent -- Vincent Chaptal, PhD Director of GdR APPICOM Drug Resistance and Membrane Proteins Lab MMSB -UMR5086 7 passage du Vercors 69007 LYON FRANCE +33 4 37 65 29 01 http://www.appicom.cnrs.fr http://mmsb.cnrs.fr/en/

2 3

Re: [chimerax-users] python script for measuring distance
by Rangarajan, Amith 13 Feb '22

13 Feb '22

Hello everyone, Please see my script below: import os import sys from chimerax.core.commands import run as rc target_folder = '/wynton/home/jacobson/avranga1008/Documents/0-combo' os.chdir(target_folder) home =os.getcwd() all = os.listdir() xp_distance_file = os.path.join(home,'xp-distance.log') print_to_screen = sys.stdout mae_files =[] for f in all: if f.endswith('.mae'): mae_files.append(f) print(f'working on {f}') sys.stdout = open(xp_distance_file,'a') rc(session,"open " + f) rc(session,"measure center #1.1 & ligand mark true") rc(session,"measure center #1.1 :310,335,728,759 mark true") rc(session,"distance #2 #3") rc(session,"close") sys.stdout = print_to_screen print(f'completed writing xp-distance values to {xp_distance_file} ; now moving to next loop') for f in mae_files: line = f + '\n' open('file_list.txt','a').write(line) print("loop is complete") exit() I am curently using stdout to write the distance values to a file .I am currently running it on command line [cid:68afa919-1a35-470f-808c-242e97c85957] it seems like a round about way to do it. The output file has lot of special characters and it takes a bit of effort using regex to extract the values. I think there might be some logger in chimerax which can do this or some other better way to write results to a file , but i am not able to find it. ############# please let me know your suggestions on improving this code. thanks, amith

2 2

Re: [chimerax-users] Chimera system requirements
by Elaine Meng 10 Feb '22

10 Feb '22

> On Feb 10, 2022, at 10:03 AM, Armin Delnia <armindelnia(a)gmail.com> wrote: > > Dear Sir/Madam, > I would like to ask what are the system requirements in order to run Chimera and ChimeraX in terms of the RAM and CPU specifications? Thank you. > Regards, > Armin Delnia Hello Armin, This e-mail address is for commercial licensing requests. For questions about using the program(s) we recommend chimerax-users(a)cgl.ucsf.edu and/or chimera-users(a)cgl.ucsf.edu. <https://rbvi.ucsf.edu/chimerax/docs/contact.html> <https://www.rbvi.ucsf.edu/chimera/docs/feedback.html> I don't have a specific answer for you, but I CC'd chimerax-users(a)cgl.ucsf.edu on this message so you don't need to do anything else this time. I only have the following general information: the download pages say which operating systems are supported for running the programs. The ChimeraX download page also recommends using a computer <4 years old. <https://www.rbvi.ucsf.edu/chimerax/download.html> <https://www.rbvi.ucsf.edu/chimera/download.html> Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

3 2

How to define axes in chimeraX
by Zhao, Bingchun (NIH/VRC) [F] 10 Feb '22

10 Feb '22

Hi, I’ve been using Chimera to define the axes of my model, then to calculate the angle of approach, by using Tools • Structure analysis • Axes/Planes/Centroids • Define axes But I wasn’t able to find out the equivalent function in chimeraX. Would you please direct me to that function in ChimeraX? Thank you so much! Best regards, Bingchun Bingchun Zhao, PhD Postdoctoral, VF Biodefense Research Section VRC/NIAID/NIH Bldg 40, Room 2607B 40 Convent Drive Bethesda, MD 20892 Tel: 301-761-7649 Email: bingchun.zhao(a)nih.gov<mailto:bingchun.zhao@nih.gov>

2 2

Show atom style as spheres and stick simultaneously
by Mary Liu 10 Feb '22

10 Feb '22

Dear Chimera X users, Is it possible to show atom style as spheres and stick simultaneously with spheres displayed as dots or mesh so the stick is still visible within sphere dots? Thank you Mary

2 4

Loading AlphaFold output
by Daniel Trejo Banos 10 Feb '22

10 Feb '22

Hello everyone, I have the results from some AlphaFold runs, is there a way to open them with ChimeraX, so I can see the plDDT, without needing to run Alphafold from within ChimeraX? Thank you and best regards

3 2

bonding Question
by Noriega, Heather 09 Feb '22

09 Feb '22

Hello, I hope you are well. I have a quick question about the bond command. I attached the pdb file I have been using to try and learn this command. I am having a hard time figuring out how I should write it on the command line. If I want to create a bond between residue Lys76 from the antibody and the Oxygen #2 from my polymer, how would I write it on the command line? bond :lys76:O2 I have read the section in the manual but I think I am misunderstanding something, it keeps giving me a mangled atom specifier. Also, I figured out the problem from my last question/email about the volume in my viral capsid. :) Thank you for your help on that one Elaine. Thank you, Heather Noriega PhD-Pharmaceutical Science student Howard University heather.noriega(a)bison.howard.edu 520-203-1883

2 4

Pseudo bonds of missing structure in cartoon style
by Wout Oosterheert 09 Feb '22

09 Feb '22

Dear ChimeraX team, I’m making figures of a protein structure that has 4 residues missing in a flexible region. When I show the atoms as “style stick”, I can see a dashed pseudo bond between the two residues that connect the missing segment. However, when I “show cartoons” of the same structure, the dashed line disappears and the pseudo bond is no longer visible. Would you have any suggestions on what to change to make the missing structure appear as a dashed line when the model is shown in cartoon style? Of interest, in a similar structure where 3 instead of 4 residues are missing, the dashed line is in fact shown when the model is shown in cartoon style. In addition, in regular Chimera the dashed line that represents the 4 missing residues remains visible in cartoon style. Thank you for your time. Best wishes, Wout Wout Oosterheert, PhD Max Planck Institute of Molecular Physiology Otto-Hahn-Str. 11 44227 Dortmund, Germany Phone +49-(0)231-133-2357 Email: wout.oosterheert(a)mpi-dortmund.mpg.de<mailto:wout.oosterheert@mpi-dortmund.mpg.de>

2 5

Keep color on vseries
by Eric Pettersen 08 Feb '22

08 Feb '22

> > From: "Hunkeler, Moritz" <Moritz_Hunkeler(a)DFCI.HARVARD.EDU <mailto:Moritz_Hunkeler@DFCI.HARVARD.EDU>> > Subject: Keep color on vseries > Date: February 8, 2022 at 8:20:31 AM PST > To: ChimeraX-users <chimerax-users-bounces(a)cgl.ucsf.edu <mailto:chimerax-users-bounces@cgl.ucsf.edu>> > > > Hi, > > I am sure I am missing a simple step here, but I would like to visualize a vseries where each frame is colored according to an underlying model. So, I color all frames with ‘color zone #id near #id distance 15’ and then start the vseries with ‘loop true’ and ‘maxFrameRate 2’. However, as soon as it loops around once, the coloring of all maps is set back to the starting default color. Same thing happens if I just start the vseries twice without ‘loop true’: during the first round, all maps are colored correctly, during the second round all map coloring is reset. This seems to happen only when started from the command line, and not when started from the vseries slider. Is it possible to keep the map coloring when starting the vseries from the command line? I am using the version released 20220204. > > Best, > Moritz

2 1

Re: [chimerax-users] error with open :: 'foreach' has no suffix
by Rangarajan, Amith 08 Feb '22

08 Feb '22

Hi, I am trying to run a script and want to use foreach ( open script.cxc foreach *.pdb) to iterate through several pdb files in the working directory. I had no issues with running it earlier, but since last few tries, i am getting an error stating that ""'foreach' has no suffix"" I am not able to figure out how to debug this. I am using the latest build of chimerax. I will highly appreciate your suggestions on fixing this. best amith

2 2

Extract densities option not available on Segment Map
by Andre LB Ambrosio 08 Feb '22

08 Feb '22

Dear all, probably a silly question: I want to generate a mask o ChimeraX to use later on a local refinement job elsewhere. I managed to segment the cryoEM map and group the regions of interest. However, the "Extract densities" option is unavailable on the "Regions" menu. Likewise, these are unavailable on "Other tools" shortcuts options: Extract, iSeg, ProMod, and ModelZ. Please, what am I missing? I appreciate any help you can provide. -- Andre LB Ambrosio Associate Professor, IFSC/USP - Brazil www.ifsc.usp.br/alba

4 4