- ChimeraX-users - RBVI Mailing Lists

Angular distribution plot in ChimeraX
by Rayees Mattoo 10 Jan '24

10 Jan '24

Hi, I was trying to make an angular distribution plot using .bild file. I want to show the map inside the plot as in the attachment. Few questions: -My map needs to be flipped to get the correct handedness, I think I need to flip the angular distribution plot as well, how to do that? or do I have to go back and get the .bild file for the flipped map? -How can I change the colors and transparency of the angular distribution plot? -Can I get the particle count for each cylinder in the plot? Wanted to show a scale bar for particle distribution around the sphere of the plot. Best Rayees

3 3

Question regarding gaussian filtering
by Dennis Dannecker 10 Jan '24

10 Jan '24

Hello, I would like to ask a question regarding the gaussian filtering. I filtered a given map (downloaded from the emdb with the "open" command from chimerax) in chimerax using the following command: vop gaussian #1 sDev X with X taking different values ranging from 0.25 to 20 with different steps. Now I would like to know the resolutions these maps actually correspond to after this gaussian filtering. The originally loaded map is stated to have nominal resolution of 2 Angstroms (GSFSC). sDev defines the standard deviation in Angstrom of the 3D Gaussian function that is used for the filtering. How can one now calculate the resolution these filtered maps correspond to? Is it possible to calculate or state a resolution for these maps that is related to the resolution given for the original map (here 2 Angstroms). Thank you very much. Kind regards Dennis Dennis Dannecker Master Student of Biochemistry Department of Chemistry Faculty of Mathematics and Natural Sciences University of Cologne Albertus-Magnus-Platz 50923 Cologne, Germany

2 2

Question about Cylinder Representation
by Bi, Maxine 09 Jan '24

09 Jan '24

Hi there, I've been stuck trying to make my cylinder representation straight instead of curved as the default. I've tried many commands that I can find in the documentation. Could you please guide me if there is a way to just make the cylinders straight? There is a command like that in Pymol as an example (see link: https://urldefense.proofpoint.com/v2/url?u=https-3A__urldefense.com_v3_-5F-… ). Thank you so much, Maxine

1 0

retrieve the sequence of an atom selection
by Engeholm, Maik 09 Jan '24

09 Jan '24

Hi there, I'm looking for a neat way to retrieve the sequence of an atom selection (in this case part of a double-stranded DNA molecule) from within a python script. I've been playing around with: selection = run (session, 'select #1/A:2-4|#1/B:6-9') for a in selection.atoms.unique_residues: print(a) which gives me: 151 atoms, 169 bonds, 7 residues, 1 model selected /A DG 2 /A DG 3 /A DG 4 /B G 6 /B G 7 /B A 8 /B T 9 This is a good start, but ideally I'd like to get back a contiguous sequence string for each chain (like (('A', 'GGG'), ('B', GGAT'))). Also, I do not really understand, why residue names are reported as 'DG' for strand A, but 'G' for strand B, which makes extracting a sequence string from the above output quite difficult. I've also tried: selection = run (session, 'select #1/A:2-4|#1/B:6-9') for a in selection.atoms.by_chain: print(a[1]) print(a[2].unique_residues.unique_sequences[0][1]) which gives me: 151 atoms, 169 bonds, 7 residues, 1 model selected A AGGGAGTAATCCCCTTG B CAAGGGGATTACTCCCT This is obviously also not what I want since it returns the entire sequence of each chain. I guess I could take the residue numbers from the first command and use those to slice the strings returned by the second, but that feels a little awkward, and so I was wondering if there was a better, more direct way to achieve this seemingly simple task. Your help would be much appreciated. Cheers, Maik

2 3

ChimeraX : Cannot recommend to my class until minimization with vital cofactors such as FAD, NADH is built in. Returning to Chimera.
by Anne-Frances Miller 09 Jan '24

09 Jan '24

Dear Sir or Madam, After devoting several days to updating three weeks of my course to use ChimeraX instead of Chimera, I am returning to Chimera. ChimeraX may be a great cutting-edge tool, but it is not ready for a wider audience until it can make ‘common’ tasks easy. Please do not distance research from science. We desperately need science to be exciting and accessible to a wide audience. Chimera does that. ChimeraX does the opposite, sending the clear message that only an elite few are deemed worthy. Please please please, open the door to wider use, for the sake of science, and for the sake of the citizens of our country (who fund your agencies via taxes). Very Helpful - To make images with transparent backgrounds, members of my class as not going to type out ’transparentbackground true’ (even my emailer wants to spell the first string as two words). CRUCIAL - in-program minimization that includes critical cofactors (present in >40% of all enzymes and the actual source of their activities often!!) FAD, FMN, NAD(H), how is this anything more than structural biology if the sources of activity are not included? (‘biology’ implies life. Life REQUIRES chemical reactivity.) CRUCIAL - in-program trajectory analysis that can tabulate (for example) a distance, frame-by-frame and allow export in tabular form. Very Helpful - worms with thicknesses that can represent an attribute. These provide a critical orthogonal way to add a second attribute when color is already in use for a first. Very Helpful - Lighting/effects/side view GUI that allows easy optimization of figure reflectivity, special effects, all in one place and does not require users to remember what Cartesian coordinates they gave their first light. It is so much faster and delivers much better results than ChimeraX. This email records the current worst applicability gaps only, I see others have reported more. I would like to like ChimeraX, but as a person trying to bring science to wide audiences, ChimeraX is the best argument for Pymol I have seen in a while. Do not stop supporting Chimera until ChimeraX can serve real humans, please! Sincerely, and thanks to the team, Anne-Frances Novel Meritorious Research (and teaching) —•—•—•—•—•—•—•—•—•—•—•—•—•— A.-F. Miller, Ph. D. (she/elle/sie) University Research Professor Professor of Chemistry University of Kentucky https://www.uky.edu/~afm/ Visiting Fellow, Einstein Foundation of Berlin

2 1

Depth cueing
by Paul Miller 09 Jan '24

09 Jan '24

Hi How do I depth cue in ChimeraX? In Chimera I used to be able to precisely control this from the side view window but I cannot find any way of controlling depth cueing in ChimeraX. Thank you. Cheers, Paul Paul Miller (he/him), PhD University Lecturer in Pharmacology Department of Pharmacology University of Cambridge Tennis Court Road Cambridge CB2 1PD +44 1223 761267 https://www.phar.cam.ac.uk/research/miller

2 2

Hydrophobic comparison
by M.J. 09 Jan '24

09 Jan '24

Hi Dear ChimeraX developers, I met a problem and cannot find a solution on the website. I have a protein that has two conformations, in those two conformations the hydrophobic character is different, I can show them clearly by the command of mlp in Chimerax, super convenient! My question is that is there a way to show the difference quantitatively? or can be shown in one molecule and color the different on one molecule? (What I means is, for conformation A each residue has a parameter for hydrophobic, so as conformation B, can I get the numbers and do a subtraction correspondingly and know which conformation is more hydrophobic quantitatively, and even I can color one of the conformation by the subtraction). Thanks! Best regards! MJ (Mingliang Jin) Postdoc in Yifan Cheng Lab, UCSF 415-2835-171

3 5

Subscribe
by Hernando J Sosa 05 Jan '24

05 Jan '24

How do I subscribe to this (ChimeraX users) list? When I click the subscribe link in: file:///C:/Program Files/ChimeraX/bin/share/docs/contact.html I get an error message (Page not found). Thanks Hernando ___________________________________ Hernando Sosa, PhD. Dept. of Biochemistry Albert Einstein College of Medicine 1300 Morris Park Av. Bronx NY 10461 phone (718) 430-3456 emai: hernando.sosa@einsteinmed.<mailto:hernando.sosa@einsteinmed.org>edu ___________________________________ ________________________________ From: chimerax-users-bounces(a)cgl.ucsf.edu <chimerax-users-bounces(a)cgl.ucsf.edu> Sent: Friday, January 5, 2024 12:42 PM To: Hernando J Sosa <hernando.sosa(a)einsteinmed.edu> Subject: Your message to chimerax-users(a)cgl.ucsf.edu awaits moderator approval CAUTION: This email comes from an external source; the attachments and/or links may compromise our secure environment. Do not open or click on suspicious emails. Please click on the “Phish Alert” button on the top right of the Outlook dashboard to report any suspicious emails. Your mail to 'chimerax-users(a)cgl.ucsf.edu' with the subject Python IDE Is being held until the list moderator can review it for approval. The message is being held because: The message is not from a list member Either the message will get posted to the list, or you will receive notification of the moderator's decision.

2 1

Re: Python IDE
by sette＠uniroma2.it 05 Jan '24

05 Jan '24

Yes. Tools --> General -- Shell Best regards, Marco Il 05/01/2024 18:42, Hernando J Sosa via ChimeraX-users ha scritto: > Dear ChimeraX, > > Does chimera-X come with an IDE to edit and run python scripts?, > something like IDLE in Chimera? > > Thanks > Hernando > > ___________________________________ > Hernando Sosa, PhD. > Dept. of Biochemistry > Albert Einstein College of Medicine > 1300 Morris Park Av. > Bronx NY 10461 > phone (718) 430-3456 > emai: hernando.sosa@einsteinmed. <mailto:hernando.sosa@einsteinmed.org>edu > ___________________________________ > > > > _______________________________________________ > ChimeraX-users mailing list --chimerax-users(a)cgl.ucsf.edu > To unsubscribe send an email tochimerax-users-leave(a)cgl.ucsf.edu > Archives:https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl… -- Dr Marco Sette, PhD. Department of Chemical Sciences and Technology University of Rome, "Tor Vergata" via della Ricerca Scientifica, 00133, Rome, Italy e-mail:sette@uniroma2.it Tel.: +39-0672594424

1 0

Python IDE
by Hernando J Sosa 05 Jan '24

05 Jan '24

Dear ChimeraX, Does chimera-X come with an IDE to edit and run python scripts?, something like IDLE in Chimera? Thanks Hernando ___________________________________ Hernando Sosa, PhD. Dept. of Biochemistry Albert Einstein College of Medicine 1300 Morris Park Av. Bronx NY 10461 phone (718) 430-3456 emai: hernando.sosa@einsteinmed.<mailto:hernando.sosa@einsteinmed.org>edu ___________________________________

1 0

Re: [Chimera-users] Changing threshold value of attributes
by Eric Pettersen 05 Jan '24

05 Jan '24

Hi Abril, There are separate mailing list for Chimera and ChimeraX, so you should send ChimeraX questions to chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> . The problem you ran into has been fixed and the fix is in the 1.7 release candidate, so if you use that then things will work. --Eric Eric Pettersen UCSF Computer Graphics Lab > On Nov 28, 2023, at 10:25 AM, Abril Gijsbers via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Dear community, > > I want to render my model by attribute and change the thresholds (up and bottom limits). I want to change the 0.3 to 0.1 and the 2.6 to 2.7 (see the figure), this way I can compare the colour intensity with other conditions. > <image.png> > > When I do that, I get the following error. My ignorance in command use limits my understanding. Could someone help me out to understand this? I have a colleague that changes the up and bottom limit with no problem. Why? :( > > ui tool show <> "Render By Attribute" > Traceback (most recent call last): > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 759, in _set_value_cb > self._redraw_cb() > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 646, in _redraw_cb > self._bins = left + filled_bins + right > ValueError: operands could not be broadcast together with shapes (0,) (157,) > > ValueError: operands could not be broadcast together with shapes (0,) (157,) > > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 646, in _redraw_cb > self._bins = left + filled_bins + right > > See log for complete Python traceback. > > Traceback (most recent call last): > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 760, in _set_value_cb > self._move_cur_marker(v) > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 570, in _move_cur_marker > self._active_markers._update_plot() > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 1222, in _update_plot > self._update_marker_coordinates() > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 1207, in _update_marker_coordinates > x, y = self._scene_xy(m.xy) > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 1090, in _scene_xy > return self.histogram._scene_xy(abs_xy) > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 512, in _scene_xy > num_bins = len(self._bins) > TypeError: object of type 'function' has no len() > > TypeError: object of type 'function' has no len() > > File "/Applications/ChimeraX-1.6.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/ui/widgets/histogram.py <http://chimerax-1.6.1.app/Contents/Library/Frameworks/Python.framework/Vers…>", line 512, in _scene_xy > num_bins = len(self._bins) > > See log for complete Python traceback. > _______________________________________________ > Chimera-users mailing list -- chimera-users(a)cgl.ucsf.edu > To unsubscribe send an email to chimera-users-leave(a)cgl.ucsf.edu > Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimera-users@cgl.ucsf.edu/

5 7

volume amount estimation
by Jesse Hansen 05 Jan '24

05 Jan '24

dear ChimeraX users, We have a tomogram volume (.mrc) which we have segmented different components (stl files; surfaces). Is there any tool available to estimate the volume within each of the cellular components (within each surface)? Either some approximation of the cubic Angstrom/nanometers, or as a percentage of the total tomogram volume. thanks in advance! best Jesse Hansen

3 4

looking glass technology for chimerax,
by Krishnan Raman 05 Jan '24

05 Jan '24

Hi guys, Happy new year. I came across this https://www.schrodinger.com/3d-visualization-looking-glass-holographic-disp… . Can we look forward to having this compatible for chimerax since we are having difficulty finding 3D stereo displays for structural biology. Regards Krish Krishnan Raman Executive Director, Structural Biology BioCryst Pharmaceuticals CONFIDENTIALITY NOTICE This email, including any attachments, may contain confidential or legally privileged information that is intended only for the individual or entity to whom it is addressed. If you are not the intended recipient, please be advised that any dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please reply to the sender so that BioCryst Pharmaceuticals, Inc. can take corrective measures and then permanently delete this email and any attachment, including any printed copies. Thank you.

4 3

Tile behavior in Chimera vs ChimeraX - different behavior of independent rotation?
by Oliver Clarke 04 Jan '24

04 Jan '24

Hi all, Happy new year! I have some observations/queries regarding the "tile models" command in Chimera vs ChimeraX. In Chimera, the rotation mode is not linked to a specific mouse mode - so if I change it from "front center" to "independent", this will affect rotation of models regardless of how I do it - whether using the mouse, the trackpad, or using the rock, roll or turn commands on the command line. In ChimeraX, independent rotation is now a separate mousemode - so it only applies to whatever mouse mode (e.g. left mouse) one has it applied to, and does not apply to the trackpad or command line. Is there any prospect of altering this behavior, or mimicking the old behavior? When tiling many models (or maps) for comparison, I like to view them with a rocking motion to give better 3D perception, but now I can't do this (it just rocks the entire "plane" of dispersed models, rather than each independently). Cheers Oli

3 3

Error when trying to run previously working script
by Alexander Hung Lee 04 Jan '24

04 Jan '24

I have a .py script that successfully works on 400 pdb's. I tried using the same script to open a single pdb containing several thousand models. ChimeraX quit and sent me this error message in terminal "Release of profile requested but webenginepage still not deleted" Alex Lee PhD Student Woods Research Group<https://woodsgroup.franklinresearch.uga.edu/> Department of Biochemistry & Molecular Biology Complex Carbohydrate Research Center University of Georgia 315 Riverbend Rd. Athens, GA 30602 Email: ahl63010(a)uga.edu Mobile: (470) 641-3884

3 2

ChimeraX Inquiry
by ‍강유은[학생](대학원 생명공학원) 03 Jan '24

03 Jan '24

Hello I would like to purchase the premium GPU A100 to predict large proteins. How can I get access to the purchasing page? Regards, Yoo Kang

2 1

Problems with installation
by Roger Cole 01 Jan '24

01 Jan '24

Good Evening I wanted to asked about compatibility and installation issues. I am currently using a Chromebook with Linux Debian 11 (Bootstrap) and I am trying to get ChimeraX 1.7 installed onto it. I keep coming into errors when I try to run it by the way specified on the site. For info: " Download is a tarball of the chimerax application directory. Make symbolic link to executable in chimerax/bin/ChimeraX. Do not put on path. It may require additional libraries and/or older versions of libraries to be installed. More Info...built: 2023-12-19 02:49:21 PST committed: 2023-12-19 00:36:03 PST size: 584.1 MiB md5: d44f016e787d45621a077b04852ab66c sha256: 005bd0b6942b5e8c3a32ad39bb6ea1118da173217c2c0c51d3e0c665913e6c3a I used the Generic Linux download and with all i could look up with and try to figure out with ChatGPT, I get this when I try to run it: "NOTE: available bundle cache has not been initialized yet WARNING: Traceback (most recent call last): File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/core/toolshed/info.py", line 376, in initialize api._api_caller.initialize(api, session, self) File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/core/toolshed/__init__.py", line 1294, in initialize return cls._get_func(api, "initialize")(session, bi) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/dicom/__init__.py", line 31, in initialize from .ui.segmentation_mouse_mode import ( File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/dicom/ui/segmentation_mouse_mode.py", line 20, in <module> from .segmentations import SegmentationTool File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/dicom/ui/segmentations.py", line 55, in <module> from ..ui.orthoplanes import Axis File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/dicom/ui/orthoplanes.py", line 51, in <module> from ..graphics import ( File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/dicom/graphics/__init__.py", line 1, in <module> from .view import OrthoplaneView File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/dicom/graphics/view.py", line 6, in <module> from chimerax.graphics import gllist File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/graphics/gllist.py", line 71, in <module> wrap_opengl_routines(globals()) File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/graphics/gllist.py", line 22, in wrap_opengl_routines from OpenGL import GL File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/OpenGL/GL/__init__.py", line 4, in <module> from OpenGL.GL.VERSION.GL_1_1 import * File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/OpenGL/GL/VERSION/GL_1_1.py", line 14, in <module> from OpenGL.raw.GL.VERSION.GL_1_1 import * File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/OpenGL/raw/GL/VERSION/GL_1_1.py", line 7, in <module> from OpenGL.raw.GL import _errors File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/OpenGL/raw/GL/_errors.py", line 4, in <module> _error_checker = _ErrorChecker( _p, _p.GL.glGetError ) ^^^^^^^^^^^^^^^^ AttributeError: 'NoneType' object has no attribute 'glGetError' ERROR: Bundle 'ChimeraX-Dicom' custom initialization failed NOTE: Traceback (most recent call last): File "<frozen runpy>", line 198, in _run_module_as_main File "<frozen runpy>", line 88, in _run_code File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/chimerax/core/__main__.py", line 1069, in <module> exit_code = init(sys.argv) ^^^^^^^^^^^^^^ File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/chimerax/core/__main__.py", line 722, in init sess.ui.build() File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/chimerax/ui/gui.py", line 191, in build self.main_window = mw = MainWindow(self, self.session) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/chimerax/ui/gui.py", line 445, in __init__ self.graphics_window = g = GraphicsWindow(self._stack, ui, stereo) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/chimerax/ui/graphics.py", line 36, in __init__ oc = OpenGLContext(self, ui.primaryScreen(), use_stereo = stereo) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/chimerax/graphics/opengl.py", line 60, in __init__ _initialize_pyopengl() # Set global GL module. ^^^^^^^^^^^^^^^^^^^^^^ File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/chimerax/graphics/opengl.py", line 375, in _initialize_pyopengl import OpenGL.GL File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/OpenGL/GL/__init__.py", line 4, in <module> from OpenGL.GL.VERSION.GL_1_1 import * File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/OpenGL/GL/VERSION/GL_1_1.py", line 14, in <module> from OpenGL.raw.GL.VERSION.GL_1_1 import * File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/OpenGL/raw/GL/VERSION/GL_1_1.py", line 7, in <module> from OpenGL.raw.GL import _errors File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/OpenGL/raw/GL/_errors.py", line 4, in <module> _error_checker = _ErrorChecker( _p, _p.GL.glGetError ) ^^^^^^^^^^^^^^^^ AttributeError: 'NoneType' object has no attribute 'glGetError' BUG: AttributeError: 'NoneType' object has no attribute 'glGetError' File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site- packages/OpenGL/raw/GL/_errors.py", line 4, in _error_checker = _ErrorChecker( _p, _p.GL.glGetError ) ^^^^^^^^^^^^^^^^ _See log for complete Python traceback._ NOTE: Exception ignored in: <function OpenGLContext.__del__ at 0x7e24611d5a80> Traceback (most recent call last): File "/home/rogercoleucf/chimerax-1.7/lib/python3.11/site-packages/chimerax/graphics/opengl.py", line 85, in __del__ if not self._deleted: ^^^^^^^^^^^^^ AttributeError: 'OpenGLContext' object has no attribute '_deleted'" This is as far as i could get I apologize about the lengthy message, and thank you for any assistance you can give -CJ

2 1

Recover unsaved ChimeraX session?
by André Graça 29 Dec '23

29 Dec '23

Dear all, happy Holidays! I am not very optimistic about this one, but I will just drop the question here and it may simply be that I am unaware of this function: I had a ChimeraX session crashing just when I was about to save it for the first time... is there any way to recover unsaved ChimeraX session, such as temporarily saved files? Thank you, André

2 2

PDB Conversion to Mol2 File Inquiry
by Joel Subach 28 Dec '23

28 Dec '23

Hello Chimerax, I hope you're well:). Towards the above subject, SwissParam has recommended UCSF Chimera to convert my pdb to a Mol2 File for SwissParam subsequent parameterization, however, I could not discover this webpage within your UCSF Chimerax Website? Thanks if you can clarify how I may generate this Mol2 via yout Chimera if able. Best, Joel 🚀

2 6

Error in using alphafold by ChimeraX
by Ping-Hung Chen 陳炳宏 26 Dec '23

26 Dec '23

Hi, I tried to run Alphafold prediction by ChieraX, and it appears below Error. Please cite ColabFold: Making protein folding accessible to all. Nature Methods (2022) if you use these predictions. INFO:__main__:Starting prediction on 2023-12-26 UTC time INFO:__main__:Installing ColabFold on Google Colab virtual machine. --------------------------------------------------------------------------- ImportError Traceback (most recent call last) <ipython-input-8-1833a07b73e1> in <cell line: 329>() 327 remove_from_list(seq_list, 'prokaryote') # Obsolete "prokaryote" flag 328 --> 329 run_prediction(seq_list, use_templates = use_templates, energy_minimize = not dont_minimize) 7 frames /usr/local/lib/python3.10/dist-packages/alphafold/data/mmcif_parsing.py in <module> 22 from absl import logging 23 from Bio import PDB ---> 24 from Bio.Data import SCOPData 25 26 # Type aliases: ImportError: cannot import name 'SCOPData' from 'Bio.Data' (/usr/local/lib/python3.10/dist-packages/Bio/Data/__init__.py) --------------------------------------------------------------------------- Would you like to help me with it? Thank you. Sincerely, PH Ping-Hung Chen, Ph.D., Assistant Professor Institute of Biochemistry and Molecular Biology College of Medicine, National Taiwan University Address: R913, No.1, Sec.1, Ren-Ai Rd., Zhongzheng Dist., Taipei 10051, Taiwan (R.O.C.) E-mail: pinghungchen(a)ntu.edu.tw; phcrose(a)gmail.com Phone: +886 2-23123456 Ext. 88864

3 2

Re: How to save a sequence in an mmCIF file?
by Greg Couch 22 Dec '23

22 Dec '23

To answer the general question, ChimeraX doesn't yet have a way to set the full sequence for a mmCIF entity. See https://www.wwpdb.org/deposition/preparing-pdbx-mmcif-files for how to fix the mmCIF output from various refinement packages. For example, the Phenix has "mmtbx.prepare_pdb_deposition program to create a mmCIF file with the sequence". In this particular case, where the starting structure is an Alphafold prediction with atoms for every residue in the full sequence, you can get the correct sequence into the mmCIF output with the "bestGuess" option. See https://www.cgl.ucsf.edu/chimerax/docs/user/commands/save.html#mmcif. I'd also recommend, in your case, using the computedSheets option. In older ChimeraX's, you need to run dssp before using computedSheets to get the helix information. In recent ChimeraX's (daily build and 1.7 release candidate), computedSheets will also output the helix information if it wasn't present in the input. Adding a sequence with bestGuess can be deceiving of because missing leading or trailing residues, or gaps of indeterminate length. But in this case, you should be fine. -- Greg On 11/29/23 02:45, Guillaume Gaullier wrote: > *From: *Guillaume Gaullier via ChimeraX-users > <chimerax-users(a)cgl.ucsf.edu> > *Subject: **[chimerax-users] How to save a sequence in an mmCIF file?* > *Date: *November 29, 2023 at 2:45:31 AM PST > *To: *"chimerax-users(a)cgl.ucsf.edu" <chimerax-users(a)cgl.ucsf.edu> > *Reply-To: *Guillaume Gaullier <guillaume.gaullier(a)kemi.uu.se> > > Hello, > > Starting from an AlphaFold prediction, I refined a model against a map > with ISOLDE. I trimmed the segments not supported by any density. The > resulting mmCIF file that I saved now opens with this warning: > > Unknown polymer entity '1' near line 187 > Missing or incomplete entity_poly_seq table. Inferred polymer > connectivity. > > Displaying the sequence of this chain shows the correct numbering > (with jumps in numbering according to missing segments in the > structure), but the sequence of the missing structure segments is not > displayed. > > When I open the fasta file containing the full-length sequence, the > sequence gets automatically associated to the structure, and the > sequence viewer annotates the segments with missing structure > correctly. I would like to save this full-length sequence in my mmCIF > file so the full-length sequence with annotated missing structure > segments shows up next time I open this file. But when I try to save > at this point, I get the following notice: > > Not saving entity_poly_seq for non-authoritative sequences > > The documentation for "save" and "sequence" didn't help. How can I > make this sequence "authoritative" and save it into my mmCIF file? > > Thank you in advance, > > Guillaume > > > > > > > > > > När du har kontakt med oss på Uppsala universitet med e-post så > innebär det att vi behandlar dina personuppgifter. För att läsa mer om > hur vi gör det kan du läsa > här:http://www.uu.se/om-uu/dataskydd-personuppgifter/ > > E-mailing Uppsala University means that we will process your personal > data. For more information on how this is performed, please read > here:http://www.uu.se/en/about-uu/data-protection-policy_______________________________________________ > ChimeraX-users mailing list --chimerax-users(a)cgl.ucsf.edu > To unsubscribe send an email tochimerax-users-leave(a)cgl.ucsf.edu > Archives:https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl… >

6 18

autodock Vina
by Michael Sacher 22 Dec '23

22 Dec '23

I am running Chimera X. I downloaded autodock Vina. It should show as a tool>surface binding analysis but it is not there. How do I get the surface binding analysis option to show and to display Vina? Thanks. Michael

2 3

Cannot launch ChimeraX 1.7 GUI on Red Hat Enterprise Linux 9.3
by Wen 21 Dec '23

21 Dec '23

Dear Elaine, I tried to install ChimeraX 1.7 on Red Hat Enterprise Linux 9.3. yum install mesa-libOSMesa-21.3.4-2.el9.x86_64.rpm yum install ucsf-chimerax-1.7-1.el9.x86_64.rpm Everything went well. However, when I tried to launch ChimeraX, I met the following errors: [wenliu@localhost Downloads]# chimerax QStandardPaths: runtime directory '/run/user/800' is not owned by UID 0, but a directory permissions 0700 owned by UID 800 GID 800 QStandardPaths: runtime directory '/run/user/800' is not owned by UID 0, but a directory permissions 0700 owned by UID 800 GID 800 NOTE: available bundle cache has not been initialized yet NOTE: Traceback (most recent call last): File "<frozen runpy>", line 198, in _run_module_as_main File "<frozen runpy>", line 88, in _run_code File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/__main__.py", line 1069, in <module> exit_code = init(sys.argv) ^^^^^^^^^^^^^^ File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/__main__.py", line 664, in init toolshed.init(sess.logger, debug=sess.debug, File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/toolshed/__init__.py", line 1389, in init _toolshed = Toolshed(*args, **kw) ^^^^^^^^^^^^^^^^^^^^^ File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/toolshed/__init__.py", line 396, in __init__ settings.toolshed_last_check = now.isoformat() ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/settings.py", line 199, in __setattr__ ConfigFile.__setattr__(self, name, value) File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/configfile.py", line 386, in __setattr__ ConfigFile.save(self) File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/configfile.py", line 335, in save with SaveTextFile(self._filename) as f: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/safesave.py", line 191, in __init__ SaveFile.__init__(self, filename, open=open_text, critical=critical) File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/safesave.py", line 80, in __init__ raise OSError(errno.ENOTDIR, os.strerror(errno.ENOTDIR), save_dir) NotADirectoryError: [Errno 20] Not a directory: '/do/not/run/as/root/.config/ChimeraX' BUG: NotADirectoryError: [Errno 20] Not a directory: '/do/not/run/as/root/.config/ChimeraX' File "/usr/libexec/UCSF-ChimeraX/lib/python3.11/site- packages/chimerax/core/safesave.py", line 80, in __init__ raise OSError(errno.ENOTDIR, os.strerror(errno.ENOTDIR), save_dir) _See log for complete Python traceback._ ChimeraX did not launch. Could you advise me on how to proceed? Thanks in advance. Wen Liu @ UCHC

2 1

ISOLDE 1.7 released
by Tristan Croll 21 Dec '23

21 Dec '23

Hi all, To follow the recent announcement of the ChimeraX 1.7 release, I'm happy to announce the matching release of ISOLDE 1.7. Should now be available for installation from the ToolShed. I've also put up a new build of the QScore plugin compatible with Python, allowing it to be used with recent ChimeraX versions. Happy holidays (and happy modelling)! Best, Tristan -- Altos Labs UK Limited | England | Company reg 13484917 Registered address: 3rd Floor 1 Ashley Road, Altrincham, Cheshire, United Kingdom, WA14 2DT

1 0

ChimeraX Log File Question
by Bani Kaur 20 Dec '23

20 Dec '23

Hi, I hope you are doing well! My name is Bani Kaur and I am a ChimeraX user. I wanted to ask you how I would be able to download my log file - I am not able to figure out what line to put into the system. Thank you so much! Best, Bani kaur

2 2

ChimeraX protein-protein binding site modeling question
by Parks, Ryssa 20 Dec '23

20 Dec '23

Hello, I work in a lab that researches biopesticides in the form of insect neuropeptides, which bind to receptor proteins. I am trying to use ChimeraX to model potential binding sites between peptide ligands and their corresponding receptor. Does ChimeraX have this capability? When I was trying to figure this out myself online through the ChimeraX Youtube tutorials and tutorials on the UCSF site, I came across a comment on a video that mentioned I could upload the sequences of my receptor and peptide ligand separated by a comma, and model it as a protein complex, and then I can get information on where the two molecules interact. I'm relatively new to protein research, and so I hadn't yet thought of ligand-protein interactions as a type of protein complex. My specific questions are: * When modeling a peptide ligand and a receptor as a protein complex, will ChimeraX accurately predict the relationship between the two molecules based on binding compatibility? Or is it based on something else, like similarity of sequence alignments...? * If multiple binding sites are possible, is there any way to view the different options for multiple binding sites? Or is there any way to restrict the area on the receptor to which my target peptide ligand is predicted to bind (i.e. the extracellular region only)? * The peptide ligands are only 7-9 amino acids in length and do not take very long to model, but the receptor is about 600 amino acids and takes a much longer time to model. Do I have to model protein complexes by re-modeling everything for each different receptor-ligand combination, or can I combine existing models somehow? I hope these questions aren't too troublesome, and I hope I haven't grossly misunderstood ChimeraX's capabilities. Thank you for your time, Ryssa Parks

3 2

Problem with Snap Installation
by Stephen P. Molnar 20 Dec '23

20 Dec '23

I have had Chimerax.flatpack installed on by Debian Bookworm Platform. As a result of a system crash I was force to reinstall the OS. When I attempted a reinstallation on the New OS I got the following error: error: The application edu.ucsf.rbvi.ChimeraX/x86_64/master requires the runtime org.freedesktop.Platform/x86_64/22.08 which was not found Please advise. Thanks in advance. -- Stephen P. Molnar, Ph.D. https://insilicochemistry.net (614)312-7528 (c) Skype: smolnar1

3 5

ISOLDE messes with view?
by Alexis Rohou 20 Dec '23

20 Dec '23

Hello, I've just noticed that the view command doesn't behave as expected after I have started ISOLDE. Specifically, if I save a view ("view name view1") and later try to restore it ("view view1"), it will get me back to the correct orientation of view1 but the zoom will not be restored. I assume ISOLDE is changing a setting under the hood. Is there some way to make ISOLDE play nicely with "view"? Right now my only workaround is to quit ChimeraX and start again front he beginning, without launching ISOLDE. Cheers, Alexis

3 9

Adjust Torsions section of Build Structure is missing
by duhq 20 Dec '23

20 Dec '23

3 4

Log auto-scrolling
by Alexis Rohou 19 Dec '23

19 Dec '23

Hi, Is there a way to make sure that the Log window stays scrolled all the way to the end of the log? I keep having to scroll back down to see the output of the last command I issued. Perhaps this is because I scrolled back up at some point, I'm not sure. Either way, it'd be nice to have the option to switch on (and off) "auto scroll" for the Log window. Cheers, Alexis

2 2

Support for unknown amino acid and nucleotide
by Vorländer,Matthias Kopano 19 Dec '23

19 Dec '23

Dear ChimeraX team, When depositing models in the PDB, it is often necessary to change the nucleotide or amino acid type to “Unknown” when the resolution is not good enough to identify the register (https://www.wwpdb.org/documentation/procedure) Would it be possible to extend the functionality of the swapna and swapaa commands to support changing residues into UNK for proteins and N/DN for nucleic acids? Many thanks in advance, Matthias

2 2

ChimeraX 1.7 release!
by Elaine Meng 19 Dec '23

19 Dec '23

UCSF ChimeraX version 1.7 has been released! ChimeraX includes user documentation and is free for noncommercial use. Download for Windows, Linux, and MacOS from: https://www.rbvi.ucsf.edu/chimerax/download.html Updates since version 1.6 (May 2023) include: New graphical interfaces: - Fetch By ID - Map Filter - Adjust Torsions (new section in Build Structure) - Adjust Angles defined by three atoms (also in Build Structure) Open command options to: - specify model number - combine incoming session with existing session - designate map as difference map (show +/-contours automatically) - fetch by IUPAC name (also in Build Structure tool) - fetch EMDB map + fit structures Mouse mode updates: - new mouse mode to center the view on the clicked item - better separation of trackpad multitouch zoom and rotate - Z-translation by additionally pressing Ctrl in a translation mouse mode Other: - invert selection with left/right arrow keys - mcopy command to copy settings from one atomic structure to another - save GLTF options to cull backfaces, omit per-vertex colors, omit normals - volume defaultvalues command to set defaults for subsequently opened maps - info command saveFile option (list selection, attribute values, etc.) - opening docking results automatically starts ViewDockX - button to save Blast Protein results to TSV For details, please see the ChimeraX change log: https://www.rbvi.ucsf.edu/trac/ChimeraX/wiki/ChangeLog On behalf of the team, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

extract highlighted residue with sequence number
by paul.protein.test＠gmail.com 19 Dec '23

19 Dec '23

Hi All I am highlighting all residues that are involved in a protein-protein interaction. Is there anyway to extract a list including all residues and associated sequence number, or display in log?

2 1

Re: extract highlighted residue with sequence number
by Luca Genz 19 Dec '23

19 Dec '23

Hi, there is a plug-in in the ChimeraX toolshed called PICKLUSTER that can identify the residues in the protein interface, colors them and reports a list of the residues in the interface with their sequence number in the Log. It can also report the contacts and can color the interface residues in the sequence. Hope that helps!

1 0

how to set pH level from ChimeraX
by Chang Jang 18 Dec '23

18 Dec '23

Dear ChimeraX help, I am using ChimeraX 1.6.1. Would anyone know how to "*set or change and check*" a pH level of a protein or a system from the software? Thanks, Chang Woon

2 1

AUTODOCK VINA - CHIMERAX (Candidate version 1.7rc202312150000)
by Emmanuel Funsho Alakunle 18 Dec '23

18 Dec '23

Good day, Please I am running Chimera-x ( Candidate version 1.7rc202312150000) on windows11, and I cannot locate the autodock vina plugin. Kindly help. Thanks *Emmanuel Funsho Alakunle* *Natural and Environmental Sciences (Biomedical Science)* *American University of Nigeria* *Yola-by-pass, PMB 2250, Yola* *Nigeria.* *P:+234(0)8108074431* *Skype:* *Linkedin: **linkedin.com/in/emmanuel-alakunle-356088154 <https://www.linkedin.com/in/emmanuel-alakunle-356088154>*

2 1

RAMACHDRAN PLOT - CHIMERAX
by Emmanuel Funsho Alakunle 17 Dec '23

17 Dec '23

Good day, Please I am running Chimera-x on windows11, and I cannot generate ramachdran plot. Kindly help. Thanks *Emmanuel Funsho Alakunle* *Natural and Environmental Sciences (Biomedical Science)* *American University of Nigeria* *Yola-by-pass, PMB 2250, Yola* *Nigeria.* *P:+234(0)8108074431* *Skype:* *Linkedin: **linkedin.com/in/emmanuel-alakunle-356088154 <https://www.linkedin.com/in/emmanuel-alakunle-356088154>*

3 3

savefile command
by Bajaj, Ruchika 17 Dec '23

17 Dec '23

Hi I am trying to use the following commands for selected atoms. I am trying this "info atoms sel" and it is working. However, I am not able to use saveFile file commands. Could you please help me with its usage. I'd appreciate your help in this regard. Thanks !! Regards Ruchika info atoms atom-spec<https://www.cgl.ucsf.edu/chimerax/docs/user/commands/atomspec.html> [ attribute attribute-name ] [ saveFile<https://www.cgl.ucsf.edu/chimerax/docs/user/commands/info.html#saveFile> file ]

2 1

Density map on ligand
by Louis Fellipe Moreno Oliveira 16 Dec '23

16 Dec '23

Hello, I hope this email finds you well. My name is Louis OIiveira, and I am a Master's student specializing in protein crystallography at the University of São Paulo. I am currently using Chimera X for generating images of the structure I am studying. However, I have encountered some issues that I am struggling to resolve. Specifically, I have successfully validated the structure of the enzyme and am now attempting to present the co-crystallized ligand along with its electronic density map interacting with the enzyme. My challenge lies in isolating the electronic density of the ligand without including the electronic density of the nearby residues. I have attempted to use the "zone" function in the map menu, but I am still seeing some electronic density that I wish to exclude as shown in the picture . I would greatly appreciate your guidance on how to effectively isolate the electronic density of the ligand in Chimera X. If you have any insights or recommendations, I would be grateful for your assistance. Thank you for your time, and I look forward to hearing from you soon. Best regards, Louis Oliveira Master's Student Instituto de Fisica de São Carlos University of São Paulo

2 2

insertion codes in labels
by Alexis Rohou 14 Dec '23

14 Dec '23

Hello, A two part question from me today: Part A. What is the syntax to get the label command to show insertion codes? As far as I can tell, insertion codes are not attributes. I can see that the insertion code is part the residue ID, but I don't know how to specify it as part of the label command. Part 2. Would you consider having residue labels show insertion codes by default? This would be very useful when labeling residues from antibodies with Kabat numbering, for example, and my guess is it wouldn't "hurt" existing usage. My apologies to Elaine in advance if I missed all this in the documentation. Cheers, Alexis

2 2

command line to save multiple models
by Rayees Mattoo 13 Dec '23

13 Dec '23

Hi, I volume flipped 20 different models (#1 to #20) and now I want to save all the 20 flipped maps as .mrc with the same name as before and add flip in their names. How could I modify the save command line to do that? Best

4 6

'Send to Quest' button not available
by Wiesler, Marie-Christin (Manufacturing, Clayton) 12 Dec '23

12 Dec '23

Dear User Guides, I am trying to send a file from ChimeraX to LookSee, in order to visualise it on my Meta Quest Pro headset. The tool 'Send to Quest' is not available in ChimeraX on my desktop, it is supposed to be in Tools/General. Thanks in advance! Mary

2 4

unexpected surface "shimmering" when model argument is given to turn command with soft lighting
by Alexis Rohou 12 Dec '23

12 Dec '23

Hi all, I was playing around with movies where I rotate models around their own centers and noticed an unpleasant (to my eye) rendering glitch. Steps to reproduce (this is with 1.7rc202311150127): close open pdb:7vja; lighting soft; surf; ~show; view movie record; turn y 1 360 model #1; wait 360; movie encode test_spin_model.mp4 movie record; turn y 1 360; wait 360; movie encode test_spin.mp4 So we have two "spin" movies of the same surface, but one of them ("test_spin_model.mp4") has a shimmering artefact. At first I mistook this for a video compression artefact, but it's there in the "live" rendering and it disappears if I drop the "model" argument to the "turn" command. Also, I can't reproduce this if I don't use soft lighting. I will try to send the movies as attachments to a reply to this email (not sure they'll go through). Cheers, Alexis

2 3

rainbow "structures" different from single chain specifier
by vincent Chaptal 12 Dec '23

12 Dec '23

Hi, on a pdb ensemble, when I use: rainbow #1 structures palette blue:cyan it colors the whole chain 1.1 blue and varies the color to cyan all the way to chain 1.20 (which is what I want). However, if I want to color a specific chain differently using: rainbow #1.1-10/O palette red:yellow it colors the rainbow from N-ter to C-ter for all the chains. How can I apply the first type of coloring (structures) to a specific chain? Thank you. Vincent -- Vincent Chaptal, PhD Director of GdR APPICOM Drug Resistance and Membrane Proteins Lab MMSB -UMR5086 7 passage du Vercors 69007 LYON FRANCE +33 4 37 65 29 01 http://www.appicom.cnrs.fr http://mmsb.cnrs.fr/en/

2 4

augment mousemode center with cofr centerofview; alter animation frames
by leeyang+chimerax＠gmail.com 11 Dec '23

11 Dec '23

Hi, I find the mousemode center function very useful when navigating around a model. One of the features I loved about the original Chimera. Would it be possible to have the option to augment it with a cofr centerofview feature so that the pivotpoint then follows subsequent translation? Also, would it be possible to define a custom number of frames over which the animation occurs? Cheers, Yang

2 3

Re: AlphaFold to run .pkl file and the tax error
by Tom Goddard 11 Dec '23

11 Dec '23

Hi Serhat, AlphaFold does not provide docking scores or energy minimization scores as far as I know. AlphaFold estimates pTM (predicted TM) and ipTM (interface predicted TM) scores related to prediction accuracy. You might want to google molecule TM score to learn about those. And googling Alphafold iptm gives as the top hit a paper describing those scores Evaluation of AlphaFold-Multimer prediction on multi-chain protein complexes https://academic.oup.com/bioinformatics/article/39/7/btad424/7219714 ChimeraX does not show you those scores but does have ways of visualizing the pLDDT (predicted local distance difference test) and PAE (predicted aligned error) generated by AlphaFold, described here https://www.rbvi.ucsf.edu/chimerax/data/pae-apr2022/pae.html And you may be interested in ChimeraX videos about visualizing AlphaFold confidence https://youtu.be/oxblwn0_PMM https://youtu.be/TMcjEecFHaI and more ChimeraX AlphaFold videos here https://www.rbvi.ucsf.edu/chimerax/docs/videos/ The .pkl (Python pickle) files contain data such as PAE scores. ChimeraX can read pkl file to show the scores as described in the above links. The alphafold issue #629 you reference about AlphaFold inserting jax data structures into .pkl files was long ago fixed in both AlphaFold and ChimeraX 1.5 as described in the link you sent. The solution is of course to update the version of ChimeraX and AlphaFold you are using. If you are using any ChimeraX version to run AlphaFold it is using a current AlphaFold. But ChimeraX AlphaFold runs don't produce .pkl files so I guess you are running an old AlphaFold in a different. Tom > On Dec 11, 2023, at 4:23 AM, serhat inceer <serhatinceer(a)yahoo.com> wrote: > > Dear Tom Goddard > > > My name is Serhat Inceer Researcher at the University of Vienna department od Molecular Biology, and I am reaching out to seek assistance regarding the interpretation of docking scores and multimer energy minimization scores in AlphaFold. > > Additionally, I have questions about running ".pkl" files to analyze plDDt graphs for the predicted and ranked models that I have already predicted models. > > Specifically, I am interested in understanding the methodology and significance of the docking score and multimer energy minimization score provided by AlphaFold. Could you please provide more information on how these scores are calculated and what they signify in the context of protein structure prediction? > > Furthermore, I have generated ".pkl" files for my predicted models, and I am interested in running them to obtain plDDt graphs. Could you please guide me on the steps to run the ".pkl" files for this purpose? Any documentation or resources that outline the process would be greatly appreciated. > > According my research on GitHub you got also same error and I am wondering about how could you fit it this situation > > https://github.com/google-deepmind/alphafold/issues/629 > > Thank you very much for your time and assistance. I look forward to your response. > > Best regards, > > Serhat Inceer > >

1 0

Smooth-MD script for a trajectory visualisation
by Enrico Martinez 08 Dec '23

08 Dec '23

Dear Chimera-X users. I am trying to record a md trajectory loaded as multi-pdb file: open ./stripped_traj2.pdb coordsets true I have the issue with smooth-md script (enclosed), which produces the following error: open smooth_md_chX.py open /home/test/Bureau/MOVIE_CHIMERAX\/smooth_md_chX.pyTraceback (most recent call last): File "/home/test/Bureau/MOVIE_CHIMERAX\/smooth_md_chX.py", line 23, in <module> avg += weight * coord_sets[j] ValueError: operands could not be broadcast together with shapes (6120,3) (6112,3) (6120,3) Should something be fixed in the script in order that I could observe the MD movie with smooth details ? Thank you in advance Enrico

2 9

Re: Following Up on Drawing Outlines
by Tom Goddard 07 Dec '23

07 Dec '23

Hi André, There is only one selection outline in ChimeraX so you cannot show different color outlines directly in ChimeraX using the selection outline. Here are a couple ideas. You could select all your sites and make one outline around all of them in green and then in Photoshop change the color of parts of the outline to the appropriate colors. Another idea is you can select each patch and make its outline in the correct color and then just save that outline but not the surface. To show just the outline and not the surface you would make the surface 100% transparent and hide atoms transparency 100 hide atoms save outline1.png transparentBackground true. Save each outline as a separate image and then layer them on top of your surface in Photoshop. A problem with both of these methods is that your patches border each other so the outlines will overlap. In fact the selection outline extends outward when you make it thicker (ChimeraX avoids covering the patch with the outline). So two adjacent patches with different outlines are going to draw the outlines intersecting and crossing each other where they adjoin each other. Making the outlines extend inward could be done in Photoshop by fattening the individual layer outlines. This gets into a lot of hand work. Tom > On Dec 7, 2023, at 1:15 PM, Andre Leon <aleon(a)scripps.edu> wrote: > > Hello Tom, > > Thank you for the response! I'm guessing the answer to my next question is no, but I was wondering if there's a way to create these selection outlines around multiple regions to create figures similar to the one below, highlighting all the major antigenic sites on influenza HA. That way I can simultaneously outline the epitopes and also color the figure by sequence conservation as opposed to doing one or the other. If that's not possible, than I will pseudo outline in Illustrator or Photoshop, but it would be ideal to be able to specifically highlight the exact residues using ChimeraX. > > Again, thank you so much for your rapid response! > > > Best Regards, > André Nicolás León > Graduate Student - Ward Lab <https://ward.scripps.edu/> > https://www.linkedin.com/in/andrenicolasleon/ > From: Tom Goddard <goddard(a)sonic.net> > Sent: Thursday, December 7, 2023 12:25 PM > To: Andre Leon <aleon(a)scripps.edu> > Cc: chimerax-users(a)cgl.ucsf.edu <chimerax-users(a)cgl.ucsf.edu> > Subject: Re: [chimerax-users] Following Up on Drawing Outlines > > Hi André, > > Making a thick colored outline around an epitope on a protein surface is easier in ChimeraX using thick selection outlines. The link you mentioned from 2014 is from our old program Chimera which could only draw thin 1 pixel wide outlines. Here is an example in ChimeraX where I make a thick (10 pixel wide) red outline around some residues. > > open 2x7r > hide ~/C atoms > surface /C > select /C:670-681 > graphics selection color red width 10 > > Tom > > > >> On Dec 7, 2023, at 10:53 AM, Andre Leon via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu> wrote: >> >> Hello Chimerax, >> >> I was wondering if there has been any progress on making outlines of specific epitopes in ChimeraX since this thread back in 2014? <https://www.cgl.ucsf.edu/chimera/data/outline-may2014/outlines.html> Thank you in advance. >> >> Best Regards, >> André Nicolás León >> Graduate Student - Ward Lab <https://ward.scripps.edu/> >> https://www.linkedin.com/in/andrenicolasleon/ >> _______________________________________________ >> ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> >> To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu <mailto:chimerax-users-leave@cgl.ucsf.edu> >> Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/

2 1

Following Up on Drawing Outlines
by Andre Leon 07 Dec '23

07 Dec '23

Hello Chimerax, I was wondering if there has been any progress on making outlines of specific epitopes in ChimeraX since this thread back in 2014?<https://www.cgl.ucsf.edu/chimera/data/outline-may2014/outlines.html> Thank you in advance. Best Regards, André Nicolás León Graduate Student - Ward Lab<https://ward.scripps.edu/> https://www.linkedin.com/in/andrenicolasleon/

2 1

Add charge to PDB fails
by Daniel Hsu 06 Dec '23

06 Dec '23

Hi All What might cause this action to fail, pH=7.4, H added to protein before adding charge? No errors were thrown. Both DOCK-Prep, and adding H then charge both do not change the PDB file (no charges added to respective atoms). Log reports "Using Amber 20 recommended default charges and atom types for standard residues" Alternative command 'addcharge standardizeResidues 5BU,CSL,MSE,UMS' reports "Using Amber 20 recommended default charges and atom types for standard residues" and no errors but don't add charges to saved PDB file. Charges are added with another structure editor. Thanks for insights! **CONFIDENTIALITY NOTICE** This e-mail communication and any attachments are for the sole use of the intended recipient and may contain information that is confidential and privileged under state and federal privacy laws. If you received this e-mail in error, be aware that any unauthorized use, disclosure, copying, or distribution is strictly prohibited. If you received this e-mail in error, please contact the sender immediately and destroy/delete all copies of this message.

3 5