- ChimeraX-users - RBVI Mailing Lists

volume onesmask usage question
by Alexis Rohou 30 Mar '20

30 Mar '20

Hi there, I was trying to use "volume onesmask" to go quickly from a dusted surface of a low-pass-filtered volume to a mask volume with the same dimensions, spacing, etc. as the input map. I thought "fullmap" might be a way to achieve this (the doc says "The remaining options are the same as described for volume mask"), but I don't think that option actually works with "volume onesmask": volume onesmask #3 fullmap true *Expected a keyword* Is there a "onesmask"-like operation or set of options that creates an output volume that's on the same grid as the input volume? Thanks, Alexis

3 7

ToolInstance context menu displaying help
by Anthony James Schaefer 27 Mar '20

27 Mar '20

Hello, can tools' "Help" option in the context menu be changed to use `ToolInstance.display_help` instead of running the `help` command? I'd like to keep most of my documentation on GitHub. The `help` command cannot open URLs, so I thought I'd overwrite my tools' `display_help` methods to use `open` instead. However, I discovered this method isn't used anywhere. I've tried changing `_show_context_menu` in chimerax.ui.gui (around line 2087) to `help_action.triggered.connect(ti.display_help)`. It seems to behave the same for all built-in tools. I understand there might be reasons to not do this (e.g. users might not be able to connect to the internet). I'd like to keep stuff on GitHub because I can make a page on a GitHub wiki page faster than an HTML doc. Regardless of how tools' help pages get shown, I'd like to have examples of what my bundle can do on the GitHub wiki. To that end, my GitHub wiki could serve a dual purpose: a showcase and documentation. Best, Tony

3 4

Coloring of atomic model surfaces
by Rasmus Kock Flygaard 27 Mar '20

27 Mar '20

Dear ChimeraX developers, I have a question regarding coloring of a surface representation of an atomic model. I open the pdb file and turn on surface representation with the command, surface #1 resolution 6 This works just fine. Then I color the surface by command, color #1 skyblue This also works fine. And then I want to color the surface of only a range of residues using the command, color #1:50-86 indigo target s But nothing happens. The reply log says that 1 surface was colored but no color changes is seen in the surface representation. Am I missing something in the color command for surfaces?? Any help is appreciated! Best, Rasmus Kock Flygaard

2 1

addAtom
by Aritz Roa Eguiara 26 Mar '20

26 Mar '20

Dear ChimeraX team, Maybe it is a silly question but I have been trying to add atoms on ChimeraX but I have not found the way, is there any possibility? I need to plot a channel on my protein but I do not manage to do it without that. Thank you in advance. Best wishes, Aritz

2 2

Loss of image quality
by Lucas Tafur 26 Mar '20

26 Mar '20

Hi, I hope everything is going well considering the circumstances. I've been enjoying ChimeraX but have now encountered an annoying issue. Without any apparent reason, the quality of my rendered images becomes very bad, eventhough I'm using the same command and sampling. I've been saving using the following command: save C:\Users\XXXXX.png transparentBackground true supersample 3 It always worked fine until this week (actually, two days ago the quality was still good). Suddenly it started getting bad. I'm using version 0.93. Any help would be appreciated. Best, Lucas

2 1

NMR CSPs
by Bohg, Claudia 25 Mar '20

25 Mar '20

Hey, is it somehow possible to use this attribute in Chimera X? http://www.cgl.ucsf.edu/chimera/data/nmrcolor-nov2017/nmrcolor.html Best, Claudia

2 3

ChimeraX VTK Export
by Angelos Angelopoulos 19 Mar '20

19 Mar '20

Hello, It would be absolutely great if ChimeraX supported exporting to a VTK file like Chimera did. Are there any plans to port the VTK export functionality from Chimera to ChimeraX? If not, please consider doing it. Thank you very much. Sincerely, Angelos Angelopoulos

2 2

Re: [chimerax-users] Making movies and fitting structures into cryoEM
by Elaine Meng 13 Mar '20

13 Mar '20

Dear Madhan, My previous message already explained how you would move only one model in ChimeraX (you have to select part of it with Ctrl-click and then use the mouse mode "translate selected models" etc.). For example clicking the "translate selected models" icon in the Right Mouse toolbar assigns this mode to the right mouse button (= trackpad + Alt on Windows, trackpad + command key on Mac). See here for which Right Mouse icons go with which functions: <http://rbvi.ucsf.edu/chimerax/docs/user/tools/mousemodes.html> It sounds like even when you are moving everything together, you don't know how to translate models (up, down, left right) in either program. In Chimera, the default for translation is middle mouse button, or touchpad + option key on Mac (the key may be different on WIndows, just try the ones to the left of the space bar to see which one works). See the Mouse Preferences (menu Favorites... Preferences, change to category: Mouse) for button assignments: <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/preferences.html#Mouse> See also "using touchpad or 1-button or 2-button mouse" <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/mouse.html#2button> In ChimeraX, use command "mousemode" if you want to change assignments. The "mousemode" manpage linked below also shows a table of the default assignments, e.g. translation is middle mouse button, or Mac trackpad + Alt (or 3-finger drag if multitouch enabled), or Windows trackpad + Ctrl-Alt. <http://rbvi.ucsf.edu/chimerax/docs/user/commands/ui.html#mousemode> I hope this helps, Elaine > On Mar 13, 2020, at 11:28 AM, Tirumalai, Madhan R <mrtirum2(a)Central.UH.EDU> wrote: > > Dear Elaine > > Thank you again. > > In Chimera - am able to lock one model by unchecking the "A" box in the Model Panel - in the particular example am working with, its the Cryo-EM density map - the other model is the atomic model from the crystal structure (PDB file) - am not able to move the atomic model into the Cryo-EM density model. When I use the mouse, all am able to do is rotate the second (atomic) model at the same place - am not able to move it from its location on the screen. > > In ChimeraX - its the same problem and since it does not have the model planel, both models are moving at the same time - the commands are a bit confusing as well > > > > From: Elaine Meng <meng(a)cgl.ucsf.edu> > Sent: Friday, March 13, 2020 10:07 AM > To: Tirumalai, Madhan R <mrtirum2(a)Central.UH.EDU> > Cc: ChimeraX Users Help <chimerax-users(a)cgl.ucsf.edu> > Subject: Re: [chimerax-users] Making movies and fitting structures into cryoEM > > Dear Madhan, > I don't understand "not able to lock" in ChimeraX or "not able to move" in Chimera. > > In Chimera, you can control whether each model is hand-movable or not by checking/unchecking the "A" (activated) boxes in the Model Panel, as discussed here: > <http://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/mouse.html#activedef> > > Show the Model Panel from the Chimera Favorites menu. > > By hand you can then move the atomic model to roughly the correct place in the map before optimizing the fit with Fit in Map. > > The ChimeraX tool Fit in Map is basically the same as the Chimera tool. However, in ChimeraX, the way to move just one model is to select some part of it (Ctrl-click) and then use the mouse mode "move selected models" as discussed in this earlier post: > <http://www.rbvi.ucsf.edu/pipermail/chimerax-users/2017-November/000157.html> > > Also if you additionally press Shift, that mode switches between rotate and translate. > <http://rbvi.ucsf.edu/chimerax/docs/user/tools/mousemodes.html> > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > > > > On Mar 12, 2020, at 6:23 PM, Tirumalai, Madhan R <mrtirum2(a)Central.UH.EDU> wrote: > > > > Dear Elaine > > > > Thank you - all those tips were useful. > > > > With ChimeraX, am not able to lock the Cryo-EM density map and then use the crystal structure to fit into it. > > > > Whereas Chimera allows me to do so - however am not able to move the crystal structure to superimpose on the CryoEM density to do the 'Fit in Map' > > > > is it something am not doing right? I follow these instructions - https://www.cgl.ucsf.edu/chimera/data/tutorials/volumetour/volumetour.html#… > > > > > > From: Elaine Meng <meng(a)cgl.ucsf.edu> > > Sent: Wednesday, March 11, 2020 5:22 PM > > To: Tirumalai, Madhan R <mrtirum2(a)Central.UH.EDU> > > Cc: ChimeraX Users Help <chimerax-users(a)cgl.ucsf.edu> > > Subject: Re: [chimerax-users] Making movies and fitting structures into cryoEM > > > > Dear Madhan, > > Although ChimeraX doesn't yet have a movie-making dialog (GUI), you can make movies with ChimeraX command scripts. In a command script (plain text file named ending in .cxc), the "movie" command does recording and creating a movie file, whereas other commands (show/hide, color, turn, 2dlabel, etc.) can be used to control display, motions, and labeling... whatever you want to happen during the movie. Simply opening the .cxc file runs the commands. > > > > You can change volume thresholds with the "volume" command "level" option, for example: > > > > volume #1 level 0.08 > > > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/volume.html#general> > > > > To gradually change the threshold over multiple display frames, you can combine the "volume" command with the "perframe" command, for example: > > > > perframe "volume #2 level $1" range 0.1,0.3 frames 120; wait 120 > > > > (those should be plain text quotation marks, although the e-mail display may change them to fancy quotation marks) > > > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/perframe.html> > > > > See ChimeraX "making movies" page and links therein: > > <http://rbvi.ucsf.edu/chimerax/docs/user/movies.html> > > > > ...including movie-making tutorials: > > <http://www.rbvi.ucsf.edu/chimera/data/sbgrid-apr2017/cryomovie.html> > > <http://www.rbvi.ucsf.edu/chimerax/data/movies-may2019/moviemaking.html> > > > > See also general information on ChimeraX command files: > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/usageconventions.html#cxc-…> > > > > For your other question, if you are asking how to fit an atomic structure into a map, see the "Fit in Map" tool and/or "fitmap" command: > > <http://rbvi.ucsf.edu/chimerax/docs/user/tools/fitmap.html> > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/fitmap.html> > > > > Or to compare one atomic structure to another atomic structure, you can superimpose them with the "matchmaker" command: > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/matchmaker.html> > > > > Chimera has a Matchmaker GUI, but ChimeraX does not have the GUI yet, only the command. > > > > I hope this helps, > > Elaine > > ----- > > Elaine C. Meng, Ph.D. > > UCSF Chimera(X) team > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > > > > >> Begin forwarded message: > > >> > > >> From: "Tirumalai, Madhan R" > > >> Subject: ChimeraX > > >> Date: March 11, 2020 at 1:10:41 PM PDT > > >> To: "goddard(a)cgl.ucsf.edu" <goddard(a)cgl.ucsf.edu> > > >> > > >> Dear Dr. Goddard > > >> > > >> Warm Greetings! > > >> > > >> We have been using ChimeraX to look at mrc files. > > >> > > >> While I am able to use the "Spin movie" option, am not able to use the make movie option, which I could with the Chimera version. > > >> > > >> I would much appreciate if you could kindly let me know how: > > >> > > >> I can use the movie making option to make movies using different images with increasing/ decreasing thresholds (Volume Viewer)? > > >> > > >> Since am not familiar with docking programs, I would like to know how can one a related crystal structure into a new Cryo-EM structure to show the differences between the crystal structure and the Cryo-Em? > > >> > > >> Thanks > > >> Madhan

1 0

VR movie
by Matthias Wolf 13 Mar '20

13 Mar '20

Hi Tom, I really liked your CoV movie https://www.youtube.com/watch?v=dKNbRRRFhqY&feature=youtu.be It’s a new way of storytelling. Although we have used chimeraX in the lab with a Vive and Vive pro for about 2 years, it’s usually one person at a time, with a dark background. But your way opens up interactive VR to a larger audience (even if they don’t get to enjoy the stereoscopic 3D). And it’s cool. I have some questions: 1. How did you overlay the chimera viewport sync’d with the life camera feed showing yourself? Did you use a frame grabber on a different PC to capture the full-screen chimeraX VR viewport while simultaneously recording the camera video stream, e.g. using Adobe Premiere? 2. How did you control flipping out the outer spike domain with your hand controller? I guess you assigned control of a torsional angle in the atomic model to a mouse mode? 3. Did you enable the headset cameras to orient yourself in the room? Thanks for keeping improving chimeraX and VR! Matthias

3 4

Making movies and fitting structures into cryoEM
by Tom Goddard 13 Mar '20

13 Mar '20

> Begin forwarded message: > > From: "Tirumalai, Madhan R" > Subject: ChimeraX > Date: March 11, 2020 at 1:10:41 PM PDT > To: "goddard(a)cgl.ucsf.edu" <goddard(a)cgl.ucsf.edu> > > Dear Dr. Goddard > > Warm Greetings! > > We have been using ChimeraX to look at mrc files. > > While I am able to use the "Spin movie" option, am not able to use the make movie option, which I could with the Chimera version. > > I would much appreciate if you could kindly let me know how: > > I can use the movie making option to make movies using different images with increasing/ decreasing thresholds (Volume Viewer)? > > Since am not familiar with docking programs, I would like to know how can one a related crystal structure into a new Cryo-EM structure to show the differences between the crystal structure and the Cryo-Em? > > Thanks > Madhan > > > Madhan R Tirumalai, Ph.D., > Houston Science Center, #421 > Dept Biology & Biochemistry, University of Houston, 3455, Cullen Blvd, Houston, TX,77204-5001, USA. > Contact nos: 713-632-5463 (Cell); 713-743-8365 (office); 713-743-8351 (Fax) > > email: mrtirum2(a)central.uh.edu <mailto:mrtirum2@central.uh.edu>, madhanrt(a)gmail.com <mailto:madhanrt@gmail.com> > > ORCID link: http://orcid.org/0000-0002-5999-333X <http://orcid.org/0000-0002-5999-333X>

3 3

Re: [chimerax-users] HP Reverb headset
by Tom Goddard 12 Mar '20

12 Mar '20

Hi Shingo, I think Oculus Rift S is the best choice for ChimeraX VR. Unfortunately all the good VR headsets are sold out apparently because of production delays in China the last few months. So you will have to be patient. I think it is worth waiting instead of getting a headset that will not function well. Tom > On Mar 12, 2020, at 5:47 PM, 永野真吾 <snagano(a)tottori-u.ac.jp> wrote: > > Tom, > > Thank you for the very quick response and useful information. I will get Oculus Rift S. > > All the best, > > Shingo > > > > 2020年3月13日(金) 4:01 Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>>: > Hi Shingo, > > I have not used the HP Reverb VR headset but I have used another Windows Mixed Reality headset, the Samsung Odyssey, which worked fine in ChimeraX. ChimeraX just uses the Windows Mixed Reality runtime through SteamVR so I expect any Windows Mixed Reality headset will work. That said, the reviews on the HP Reverb are poorer than other headsets > > https://www.amazon.com/HP-Reverb-Virtual-Reality-Headset/dp/B07R768KJP <https://www.amazon.com/HP-Reverb-Virtual-Reality-Headset/dp/B07R768KJP> > > I would recommend Oculus Rift S which I have used extensively with ChimeraX. I also have used Vive Pro, Vive, Oculus Rift, and all those work well. > > Tom > > > On Mar 12, 2020, at 3:25 AM, 永野真吾 <snagano(a)tottori-u.ac.jp <mailto:snagano@tottori-u.ac.jp>> wrote: > > > > Hi all, > > > > Has anyone used HP Reverb headset for virtual reality on ChimeraX? > > That headset works fine? > > > > Any comments are welcome. > > > > Best, > > > > Shingo Nagano > > _______________________________________________ > > ChimeraX-users mailing list > > ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> > > Manage subscription: > > http://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users <http://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users> > > >

1 0

flatten a cryoEM map
by Hongtao Zhu 12 Mar '20

12 Mar '20

Hi there, Could you show me how to flatten a cryoEM map in chimera just like the attachment? My map has several subunits but with C1 symmetry. Thanks, Hongtao

3 3

ChimeraX does not start after installation
by Lewandowski, Jozef 12 Mar '20

12 Mar '20

Hi, I am trying to get ChimeraX on a Windows 10 installation on a workstation with 4 GPUs (RTX 2080Ti). The program installs just fine but when I start it, it shows the splash screen up to Loading main interface and then quits. I have tried both with the 0.92 release and the daily_build. Any chance you could help with with getting it to work? Browsing archives I learned that this may be down to some incompatibilities with drivers. The onboard graphics is ASPEED Graphics Family with driver version 9.0.10.102 The four Nvidia GeForce RTX2080Ti have driver 26.21.14.4219 installed (I updated to the latest drivers hoping it fixes it - it doesn't). Any ideas or suggestions? Thanks, Józef

2 1

HP Reverb headset
by 永野真吾 12 Mar '20

12 Mar '20

Hi all, Has anyone used HP Reverb headset for virtual reality on ChimeraX? That headset works fine? Any comments are welcome. Best, Shingo Nagano

2 1

Error opening sequence viewer
by Y. Mutum 12 Mar '20

12 Mar '20

Hi I am working with ISOLDE to build my model using ChimeraX interface. There I had added an deleted a few sequences in chain a. This was done while the sequence viewer was closed. Now, when I try to view the sequence by ' sequence chain #1/a', I am getting this error (attached as screenshot) Could you please help? I hope I don't have to start from the begining. Thanks Yaikhomba

3 2

How to save the ChimeraX startup settings?
by Steve Chou 11 Mar '20

11 Mar '20

Dear ChimeraX team, It seems that if the startup window size settings ( display window size, log window width) are different, I get different views after I run the same script, which has a lot of operations, like “move”, “turn”. How to save the startup settings and load them back or is there a startup settings file saved somewhere? Many thanks, Steve Chou -- Steve Chou

2 1

Re: [chimerax-users] pseudobond between atom and center of a ring
by Elaine Meng 10 Mar '20

10 Mar '20

Hi Alexis, I can reproduce the problem with reading the pb file transparency using a color specification of the form: /a:1@c3' /a:1@n3 rgba(20,90,90,70) However, if I use these alternative forms of transparent color specification, it works, i.e. the pseudobond is transparent: /a:1@c3' /a:1@n3 20,90,90,70 - OR - /a:1@c3' /a:1@n3 #00ced155 <http://rbvi.ucsf.edu/chimerax/docs/user/commands/colornames.html> Those atoms are in PDB 1bna, for example. Tested in current daily build I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Mar 6, 2020, at 10:33 AM, Alexis Rohou <a.rohou(a)gmail.com> wrote: > > Thanks Elaine! > > Great - so now I'm using "measure center" to create markers with 0.0000001 radius at the center of my rings with specified modelId's. Then I have a .pb file that specifies the pseudobonds to draw between markers and atoms. That all seems to work pretty well, thanks! > > Only little snag right now is I can't seem to get transparency working when the color-spec in the .pb file is in the format rgba(). Setting the transparency after opening the pb file using "transparency" works fine though, so I'm not stuck. > > Thanks again for the help. > > Cheers, > Alexis > > On Fri, Mar 6, 2020 at 9:36 AM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > Here is the more detailed description of pseudobond file format: > > <http://rbvi.ucsf.edu/chimerax/docs/user/pseudobonds.html#pbfiles>

3 7

sessions vs. logging
by Eric Pettersen 09 Mar '20

09 Mar '20

Hi all, As of tomorrow’s daily build, restoring a session will by default clear the log and restore the contents of the log from the session, hidden under a dated disclosure triangle. There is a preference in the “Log” preferences category to not clear the log (but still add the old log under a disclosure triangle). If you are a big fan of the current behavior and don’t want the old log to be added at all, I can add an option for that. If you are, feel free to speak up (but maybe try out the new behavior first?). These dated disclosure triangles “nest”, in that if you do some work and save a session, then later restore that session and do more work and save a second session, when you restore that second session you will see one disclosure triangle that shows the second set of work you did — but at the top of that second set of work will be a disclosure triangle that can be opened to show the first set of work you did. —Eric Eric Pettersen UCSF Computer Graphics Lab

1 0

Re: [chimerax-users] not showing non-traced amino acids in sequence view after splitting a molecule
by Tom Goddard 06 Mar '20

06 Mar '20

Hi Marta, Thanks for the explanation of why you use split. Suppose Model Panel showed each chain, and you deleted all the unwanted chains. Would that work as well as split? Definitely split should preserve the sequence information for missing structure, so we appreciate you bringing that to our attention. Tom > On Mar 6, 2020, at 3:04 AM, Marta Perez Illana <marta.perez(a)cnb.csic.es> wrote: > > > Thanks a lot for the ideas and opening the topic, that was absolutely great and appreciated. I just wanted to make sure that I was not messing around myself with the splitting+sequence thing. > > Ideally I wouldn't use the split as you both suggested... However, I frequently use the match maker with several homology proteins coming from big viruses with lots of proteins... and having less proteins in the session really helps me not to get confused and focus and switching on and of every protein at each time... So I am afraid that I really adore the split command. > > Having the full sequence on the other side helps me out to compare the homology proteins and see which areas are traced in one protein but not in the other (or parts of the protein that are subjected to protease fragmentation and not visualized in the structure) , as well as to get full alignments based on structure... > > I am really grateful for all the help and sorry for being a bit picky on the split+sequence... > > Marta > > > >> On 05.03.20 20:56, Tom Goddard wrote: >> Hi Marta, >> >> The sequence for the missing structure should be preserved by the split command but it currently is not being preserved. We have opened a request for that >> >> https://www.rbvi.ucsf.edu/trac/ChimeraX/ticket/2913 >> >> I agree with Elaine, that you should rarely need to use the split command. >> >> Tom >> >> >>> On Mar 2, 2020, at 9:15 AM, Marta Perez Illana wrote: >>> >>> Hi Elaine >>> >>> Thanks a lot for the quick reply! I though that maybe there was a way to keep that info of the non-traced amino acids after doing splitting. >>> >>> I use split because we work with huge molecules, and therefore is really convenient for focusing on a particular chain. And as well for fitting as you mention... I will try the alternatives you proposed! now knowing that making/saving new models implies for sure kind of "loosing that info"... >>> >>> Regards >>> >>> Marta >>> >>> >>>> On 02/03/2020 18:05, Elaine Meng wrote: >>>> Hi Marta, >>>> When you open a structure from PDB or mmCIF format, there is a special part of the file that gives the full sequence of the structure used in the experiment, even if parts of that structure are not visible in the density (and therefore do not have atomic coordinates). This is part of the model information. >>>> >>>> However, “split” makes new models, and it currently loses various kinds of information. I believe this is the case in both Chimera and ChimeraX. After splitting, it must only look at the coordinates to get the sequence. >>>> >>>> My personal opinion is to avoid using “split” unless it is really necessary. >>>> >>>> In Chimera it sometimes helped with molecular surface calculation, but in ChimeraX there is less reason to do it. You can specify chains individually without splitting. The main reason one might split is for separately fitting the chains. However, if having the full sequence is important, you can instead open multiple copies of the original model and just delete the parts of each that you don’t need. >>>> >>>> I hope this helps, >>>> Elaine >>>> ----- >>>> Elaine C. Meng, Ph.D. >>>> UCSF Chimera(X) team >>>> Department of Pharmaceutical Chemistry >>>> University of California, San Francisco >>>> >>>>> On Mar 2, 2020, at 8:30 AM, Marta Perez Illana wrote: >>>>> >>>>> Hi all >>>>> When I open a cif in chimerax and press the sequence button the window shows up and there is everything within the molecule, including the non-traced amino acids (missing in the structure). >>>>> >>>>> Whereas if I do split the molecule to have just one chain, then the sequence view only shows traced amino acids, but not the non-traced ones anymore... Any ideas on this please? >>>>> >>>>> P.D. With cif files this was a bit confusing in regular chimera for me as well, since when saving the cif it was kind of converted and I guess some info regarding this non-traced aminoacids was missed... >>>>> >>>>> Thank you!!! >>>>> Marta >>> >>> -- >>> Marta Pérez Illana, Ph. D. student >>> Dept. of Macromolecular Structures Lab 15 >>> Centro Nacional de Biotecnología (CNB-CSIC) >>> Darwin, 3 >>> 28049-Madrid (SPAIN) >>> http://wwwuser.cnb.csic.es/~sanmartinlab >>> >>> _______________________________________________ >>> ChimeraX-users mailing list >>> ChimeraX-users(a)cgl.ucsf.edu >>> Manage subscription: >>> http://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users >> > -- > Marta Pérez Illana, Ph. D. student > Dept. of Macromolecular Structures Lab 15 > Centro Nacional de Biotecnología (CNB-CSIC) > Darwin, 3 > 28049-Madrid (SPAIN) > Email: marta.perez(a)cnb.csic.es > Phone: (0034) 91 585 4508 > http://wwwuser.cnb.csic.es/~sanmartinlab

1 0

pseudobond between atom and center of a ring
by Alexis Rohou 06 Mar '20

06 Mar '20

Hi all, Looking for ideas on how to achieve the following, if possible: I'd like to draw lines to represent favorable ring-ring stacking interactions (lines between the center of two arene rings), ring-ring edge-to-face interactions (between one atom of one ring and the center of the other ring), and between a regular atom (not part of a ring) and the center of an arene ring. So I'm guess what I'm looking for is a way to: 1. compute the center coordinates of a ring 2. place an invisible atom there 3. create a pseudobond between this virtual atom and other atoms/virtual atoms Any suggestions as to how I could achieve this? Cheers, Alexis

3 6

Depth cueing and silhouette
by Aritz Roa Eguiara 05 Mar '20

05 Mar '20

Dear ChimeraX team, I write you to ask about the depth cueing option. I have a structure with the silhouette true option and now I want to change the depth cueing to obtain a slice of the structure but with some of the fog coming from the background. The cartoon color disappear gradually as expected, however the black line of the silhouette is 100% or nothing, is there anything I am doing wrong or is it what I should expect? Is there anyway to obtain also that smooth disappearing of the silhouette? Thank you for your help. All the best, Aritz

4 6

not showing non-traced amino acids in sequence view after splitting a molecule
by Marta Perez Illana 05 Mar '20

05 Mar '20

Hi all When I open a cif in chimerax and press the sequence button the window shows up and there is everything within the molecule, including the non-traced amino acids (missing in the structure). Whereas if I do split the molecule to have just one chain, then the sequence view only shows traced amino acids, but not the non-traced ones anymore... Any ideas on this please? P.D. With cif files this was a bit confusing in regular chimera for me as well, since when saving the cif it was kind of converted and I guess some info regarding this non-traced aminoacids was missed... Thank you!!! Marta

3 4

Secondary structure display - pdb and cif
by Tetter Stephan 04 Mar '20

04 Mar '20

Dear ChimeraX users and developers, I am having an issue with secondary structure display. I am real-space refining a set of 120 chains in phenix. Of these, only 10 are unique, the rest is symmetry-related. Thus, I define secondary structure elements for the 10 unique chains only. The output pdb file header contains the secondary structure elements as imposed during refinement. Displaying this pdb file in ChimeraX shows the right secondary structure. The mmcif file instead, whether I use the phenix output or generate it from the pdb myself, displays different, non-sensical structures. Secondary structure is shown in loop regions, and some actual strands and helices not recognized at all. This artifact is only shown for the 10 subunits with secondary structure definitions, the other subunits show no secondary structure at all, thus something is read in, but not correctly, apparently. Any idea what the problem could be? Could the size of the complex be an issue? The attachments show the lines from the two file types concerning secondary structure definitions. Kind regards, Stephan

3 3

"zone" near MULTIPLE residues in ChimeraX
by Steve Chou 03 Mar '20

03 Mar '20

Dear ChimeraX team, I tried to use the zone command to display the atomic details and DENSITY near THREE residues of interest. These three residues are ligands and bind to the same place. https://www.rbvi.ucsf.edu/chimerax/docs/user/commands/zone.html As the above manual said, the zone command can only display things near ONE residue. Is there a way to work around this? Many thanks, Steve -- Steve Chou

3 3

Bug: selection of atoms by attribute = color
by Pavol Bardy 393791 27 Feb '20

27 Feb '20

Hello, since version 0.91 I am experiencing problems with selecting atoms by color attribute "@@color=color". I am getting an error message "Expected an objects specifier or a keyword". In version 0.90 everything works fine. Other attributes like "bfactor" or "idatm_type" seems to work normally. Kind regards, -- Pavol Bárdy Laboratory of Microbial Molecular Diagnostics Department of Experimental Biology, Masaryk University Kamenice 5 / A25 Brno, 625 00, Czech Republic

2 1

change residues to helix
by Meinan Lyu 24 Feb '20

24 Feb '20

Dear cgl.ucsf.edu, In chimerax, Helix is disrupted for some reason, could I change the intermediate residues into helix? There are two ways I tried, 1: use 'dssp' command, 2: use 'setattr :467-469/A res ss_type 1'. But both didn't not work. Could you tell me how to change this? Best regards, Meinan [image: image.png]

2 2

Default mrc/ccp4 file opening by ChimeraX
by Kim, Doo Nam 20 Feb '20

20 Feb '20

I use mac (10.14.6). But when I double-click mrc/ccp4 file, chimera automatically opens it. I want to open it with ChimeraX (which is faster). However, even when I right-click on ccp4 file -> open with -> always open with -> ChimeraX_Daily, only that specific file is opened with chimera automatically. Does anyone know how to set up so that all (including future) .mrc and .ccp4 files are opened with ChimeraX? Thank you Best, Doonam

2 2

Error in reopening session
by Maximiliane Wieland 20 Feb '20

20 Feb '20

Hi, When I try reopening a session I have been using for two weeks now (so many saved view :( )and I get the following error: Unable to restore session, resetting. Traceback (most recent call last): File "/Applications/ChimeraX_Daily.app/Contents/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/chimerax/core/session.py", line 653, in restore obj = sm.restore_snapshot(self, data) File "/Applications/ChimeraX_Daily.app/Contents/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/chimerax/basic_actions/statemgr.py", line 65, in restore_snapshot cmd.name_frozen(session, name, Objects(**value)) File "/Applications/ChimeraX_Daily.app/Contents/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/chimerax/basic_actions/cmd.py", line 54, in name_frozen raise UserError("nothing is selected by specifier") chimerax.core.errors.UserError: nothing is selected by specifier This is the error from the daily build, in the production release one I get the same error, only difference is in "cmd.py", line 52, in name_frozen When trying to open an older version (that I saved but did not open, since I kept using the same session and saved it to the latest version) I am asked to replace missing files, which are in fact not missing but still in the very same directory and with the very same name, so it feels like the real error lies elsewhere? Can I make it reopen the session without reopening the volume? The last version of the session I can open without a problem is close to two weeks old, I named some selections in the meantime, could that cause such an error? I use ChimeraX on MacOS X 10.12.6 I will also submit the bug but since it is kind of urgent I thought I would try submitting here, too, in hopes of a quick response. Best, Maxi

1 0

Set view
by Aritz Roa Eguiara 19 Feb '20

19 Feb '20

Dear ChimeraX, I am trying to produce a script .cxc to open on ChimeraX and I want to set a specific camera position coordinates that can be opened by anyone. I do obtain the position by just using the command camera, but then I do not know how to obtain that position without saving the view. How should this be written on the command line so that anyone can open it and get that view? For example, I know that PyMol allows the get view command to obtain all the information that later only need to be pasted on the script, is there anything similar? Thank you in advance for your help. Best regards, Aritz

2 2

undo/redo move?
by Oliver Clarke 18 Feb '20

18 Feb '20

Hi, I like the expanded undo/redo capabilities in Chimerax - particularly having the capacity to undo selection/deselection and color commands is very helpful. However it seems like there is no undo/redo move functionality. I find myself using this a lot in Chimera, is there any possibility of incorporating this into Undo/Redo in ChimeraX? Basically adding the possibility to Undo/Redo translation, rotation and scaling? Cheers Oli

4 5

workflow suggestions
by Joel Meyerson 17 Feb '20

17 Feb '20

Hi, I'm a reasonably experienced Chimera user making the shift to ChimeraX. So far I'm really enjoying it. I'm writing because the biggest challenge I'm having so far is that there doesn’t seem to be anything quite like the "activate" features in the original Chimera Model Panel. Are the "activate" features available in ChimeraX, or are there plans to implement them? If not, can you suggest a way to achieve a similar degree of agility for manipulating objects in ChimeraX? So far I have been clicking between Right Mouse modes which does not feel so fluid yet. Perhaps there are keyboard shortcuts or other workflow tricks that you could suggest to improve the feel of navigation. Thanks, Joel

2 1

Re: [chimerax-users] [Chimera-users] Default storage folder, ChimeraX
by Elaine Meng 14 Feb '20

14 Feb '20

Hi Martín, Currently there is no way in the user interface to change the ChimeraX downloads location, described here: <http://rbvi.ucsf.edu/chimerax/docs/user/commands/open.html#fetch> You could make a symbolic link to that location, but the files would still really be in the same place. Probably the location can be changed by editing somewhere in the Python code, but somebody else would have to advise on that. You may be interested that there is a separate mailing list for ChimeraX, chimerax-users(a)cgl.ucsf.edu (CC’d on this message). Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Feb 13, 2020, at 4:00 PM, Martín González Buitrón <martingonzalezbuitron(a)gmail.com> wrote: > > Dears all, > Hope you are well. > > I have started to use ChimeraX in Ubuntu and I realised that one folder was created with my fetches and other things (i.e. ~/Download/ChimeraX/). > > How can I change this to other of my own preference? > All the best, > Martín

3 2

Reverse color byhet
by Ahmad Khalifa 13 Feb '20

13 Feb '20

If I color byhet then color zone a volume, the volume takes some colors from the hetero atom colors. How to reverse byhet coloring? Regards.

3 3

select menu bundle tags
by Anthony James Schaefer 12 Feb '20

12 Feb '20

Hello Are there any plans to add bundle tags for putting selectors on the select menu? Thanks, Tony

3 2

Color by Conservation in ChimeraX
by Sean Moore 11 Feb '20

11 Feb '20

Hello, I read an older post that color by conservation is pending for ChimerX. Is it available now? When I open a sequence alignment that I generated elsewhere, it shows the alignment and conservation, it identified the correct protein chain, but there is no menu in that window to assign the colors to the protein. (no option to "Again from the Multalign Viewer menu, choose: Structure... Render by Conservation. This will call Render by Attribute, in which…”) Should I use Chimera for this instead of ChimeraX? Sean

3 4

Reproduce exact view
by Christophe Leterrier 10 Feb '20

10 Feb '20

Hi, I haven't been able to find how to - log - set - store - recall a precise view (ie get the same exact image if I do a snapshot). First use case would within the same session (fixed computer, window size, no restart of the application in between). Second use case (more tricky?) would be independently of computer / window size / current session. Thanks for your help! Christophe

4 7

Re: [chimerax-users] Crossfade rough transition while making a movie
by Elaine Meng 07 Feb '20

07 Feb '20

Hi Ahmad, This appearance of snapping to the position may not be very avoidable, because “view” transitions just take a linear path and it always looks somewhat abrupt (to me anyway) when it reaches the endpoint. There is currently no option to make it go slower when it is closer to the end. You could try saving an additional position along the way and using it as an intermediate and then going slower after the intermediate by using more frames per distance, and/or you could try adding a few extra wait frames between when it reaches the endpoint and when it starts the crossfade, for example: view pos6 50; wait 100 crossfade 50; view pos5; wait 50 (OR: crossfade 50 viewpos5 50; wait 50) However, I don’t know if either of those would help much. When I’m making a movie I usually end up experimenting a lot with numbers of frames in movements and waits, but the sharp endpoints of view transitions are not currently avoidable as I understand it. Best, Elaine > On Feb 7, 2020, at 1:10 PM, Ahmad Khalifa <underoath006(a)gmail.com> wrote: > > Hi Elaine, > > Sorry if my description was vague. With the modification you suggested, I still have the rough transition between pos6 and pos5 but with a slower crossfade into pos5. > > I attached my movie (made with script in the original post) to get a better idea of what I mean. At 0:2, pos6 appears like it snaps in place, then the crossfade into pos5 occurs. > > Is there a way to make the transition smoother? > > Regards. > > On Fri, Feb 7, 2020 at 12:18 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > Hi Ahmad, > Not sure I understand what you actually want, but I’ll try to answer anyway… > > If you mean you want to see a gradual change in position from pos6 to pos5 then you would need to put a frames number after pos5, for example: > > crossfade 50; view pos5 50; wait 50 > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/view.html#name> > > (Crossfade does not interpolate the movement, you have to do it with the view command.) > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/crossfade.html> > > Some minor notes on scripts. You do not need “;” at the end of any line; it is only needed to separate commands that are on the same line as each other, as in the example above. > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/usageconventions.html#cxc-…> > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > > > On Feb 6, 2020, at 11:59 PM, Ahmad Khalifa <underoath006(a)gmail.com> wrote: > > > > I want to crossfade pos6 into pos5, the crossfading itself is smooth, but the below script gives me an abrupt transition at the start of the crossfade (at pos6), how can I fix that?! > > > > view pos4 > > wait 30; > > > > movie record supersample 3 size 1920,1080 > > view pos6 50 > > wait 50; > > crossfade 50; view pos5 > > wait 50; > > movie encode IJ_movie3.mp4 quality high > > <IJ_movie3.mp4>

2 1

Crossfade rough transition while making a movie
by Ahmad Khalifa 07 Feb '20

07 Feb '20

I want to crossfade pos6 into pos5, the crossfading itself is smooth, but the below script gives me an abrupt transition at the start of the crossfade (at pos6), how can I fix that?! view pos4 wait 30; movie record supersample 3 size 1920,1080 view pos6 50 wait 50; crossfade 50; view pos5 wait 50; movie encode IJ_movie3.mp4 quality high

2 1

Command line interface is detached
by Ahmad Khalifa 04 Feb '20

04 Feb '20

My command line interface used to be attached at the bottom. Now it's floating on the screen and the only way I could attach it back is to place it in the right panel. How can I attach it back to the bottom of the screen, spanning the entire length of the ChimeraX window? P.s. I'm running Linux Centos 7.

2 1

Chimerax on a HPC cluster
by Thu Nguyen 31 Jan '20

31 Jan '20

Dear all, I administer a small HPC cluster (Rocks 7) at a bio research institute and a user has requested Chimerax to be installed on it. Has anyone successfully done so ? If yes, I wish to help some hints as to how it is done and an assessment of how it performs . Thanks and regards Thu D. Nguyen Systems & Computational Biology Platform Bio21 Molecular Sciences and Biotechnology Institute, University of Melbourne www.bio21.org

2 1

question about ChimeraX Hide Dust Feature
by Philip Schmiege 29 Jan '20

29 Jan '20

Hi I just downloaded the new ChimeraX, and was wondering where the Hide Dust option is located. I cannot find it. Any help is greatly appreciated! Philip _____________________________________ Philip Schmiege Graduate Student in Biophysics Li Lab, Dept. of Molecular Genetics, L5.162 philip.schmiege(a)utsouthwestern.edu ________________________________ UT Southwestern Medical Center The future of medicine, today.

2 3

Fwd: Colors from snapshots
by Christophe Leterrier 29 Jan '20

29 Jan '20

Hi, I wonder why the colors in the snapshots (and movies) from ChimeraX are always washed-out compared to the colors I get live in the viewer. Attached is a screenshot with the viewer on the left, the corresponding snapshot on the right: one can see how the snapshot is desaturated compared to the viewer. From my limited tests it is the case when saving as both PNG and PPM, and I wonder if this could be corrected. I could saturate the screenshots afterward but it doesn't seem right to me to grossly mess with color levels post-hoc given how stunning the shaded rendering from ChimeraX are. Thanks, Christophe

3 5

Scripting Resources
by llehmann＠uoregon.edu 28 Jan '20

28 Jan '20

Hello, I am a teaching assistant with the University of Oregon for our Structural Biochemistry course. Currently, the course is taught using PyMOL, but we would like to transfer to ChimeraX in the future. A large portion of the course relies on publically available scripts designed for PyMOL that currently do not have equivalents for ChimeraX. We are wondering if there are plans to have a ChimeraX wiki with scripting resources similar to PyMOL at some point, or whether we'd need to write any python scripts ourselves? Of course I understand that ChimeraX is still developing, I'd just like to get a sense of whether we can reasonably transfer the course to ChimeraX in the future. Thank you for your time. Best, Lauren Lehmann Biochemistry Graduate Student University of Oregon

3 4

volume morph
by Karim Rafie 28 Jan '20

28 Jan '20

Dear all, I would like to create a morph movie between two volumes in ChimeraX, however I am having difficulties with generating it. I am using the following command (e.g.) to "create" the morph: volume morph #1,2 frames 50 After it has completed I get a new volume but I can't review the frames themselves, i.e. the output is a new map. I tried scouring the tutorials and command page but can't find a solution. I tried it with the ChimeraX Ubuntu 16.04 distribution as well as the generic linux version. Any help would be greatly appreciated. Best wishes, Karim ############################################## Karim Rafie; PhD, AMRSC Postdoctoral Research Fellow Carlson Lab Department of Medical Biochemistry and Biophysics Umeå University Umeå / Sweden

3 4

interface residue plot save as text file?
by Marta Perez Illana 28 Jan '20

28 Jan '20

Hi alI I have very recently started to play around with ChimeraX. I am trying to use the interface functionality as a substitute of traditional find contacts/clashes ( I am aware of the differences but I think for my purpose are both fine). I would like to save somehow the "interface residue plot", rather than the image of the plot per se, a kind of text file for example... is there a straight fordward way that am I missing? Thanks!! Marta

2 1

SMILES structures
by Eric Pettersen 27 Jan '20

27 Jan '20

Hi all, SMILES strings can now be translated to 3D structures (via NIH NCI or Indiana University web services), e.g. “open smiles:c1ccccc1”. —Eric Eric Pettersen UCSF Computer Graphics Lab

1 1

dome camera mode
by James Hedberg 24 Jan '20

24 Jan '20

Hi, I see from previous threads (3/2019) that there are no plans to add the dome projection/fisheye mode for the camera control on ChimeraX: "It would take some days of work to add dome camera mode to ChimeraX. We have no funding for that and very few people will use it so I'm afraid that is not likely to be implemented.” I understand there is probably not a lot of current demand for this feature, however, in the spirit of Field of Dreams - if you build it, they will come. There is a growing interest in using planetariums/full domes for non-astro related sci-viz, yet very few tools available to do so. We’re currently using Chimera (regular) to do sci-viz in the planetarium for proteins and more. Knowing that this would be supported down the road when ChimeraX takes over (not sure when that will happen) would certainly be nice. You could make ChimeraX uniquely positioned to fill this deficit. Anyway, just a hand raised here for an informal poll of ‘who wants dome mode’. Thanks, James Dr. James Hedberg Physics Lecturer Director, CCNY Planetarium<https://ccnyplanetarium.org> City College of New York Department of Physics

2 6

ChimeraX and REST service interoperation
by Mungo Carstairs (Staff) 24 Jan '20

24 Jan '20

Hi, With your helpful hints, I have a version of Jalview interacting with ChimeraX in the same way it can already with Chimera, over the REST interface. Functionality includes loading structures, aligning, colouring, raising labels on structure on mouseover in Jalview, and exchange of residue features/attributes. I have just one interaction not working yet: highlighting residues in Jalview when a selection is made in ChimeraX. - Jalview starts listening for ChimeraX selections with (e.g.) info notify start selection jalview prefix SelectionChanged url http://localhost:49981/jalview/chimera1 - user makes a selection in ChimeraX - ChimeraX sends GET?chimerax_notification=SelectionChangedselection+changed - Jalview send 'info selection level residue' - no response / timeout; ChimeraX log reports 'broken pipe error' Exception happened during processing of request from ('127.0.0.1', 50714) Traceback (most recent call last): File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 316, in _handle_request_noblock self.process_request(request, client_address) File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 347, in process_request self.finish_request(request, client_address) File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 360, in finish_request self.RequestHandlerClass(request, client_address, self) File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 720, in __init__ self.handle() File "/Applications/ChimeraX_Daily.app/.../http/server.py", line 426, in handle self.handle_one_request() File "/Applications/ChimeraX_Daily.app/.../http/server.py", line 414, in handle_one_request method() File "/Applications/ChimeraX_Daily.app/.../site-packages/chimerax/rest_server/server.py", line 97, in do_GET self._run(args) File "/Applications/ChimeraX_Daily.app/.../site-packages/chimerax/rest_server/server.py", line 174, in _run self.wfile.write(data) File "/Applications/ChimeraX_Daily.app/.../socketserver.py", line 799, in write self._sock.sendall(b) BrokenPipeError: [Errno 32] Broken pipe NB this is all before a response has been sent to the 'SelectionChanged' message. Any idea what the problem is here please? Do I need to reply to the first message before sending another? The same mechanism does work ok with Chimera. Thanks, Mungo p.s. I noticed the 'listinfo' command (undocumented) seems to behave like 'info'. Should I continue to use 'list' or switch to 'info'? * [University of Dundee shield logo]<http://uod.ac.uk/sig-home> Mungo Carstairs Jalview Computational Scientist The Barton Group Division of Computational Biology School of Life Sciences University of Dundee, Dundee, Scotland, UK www.jalview.org<http://www.jalview.org> www.compbio.dundee.ac.uk<http://www.compbio.dundee.ac.uk> g.m.carstairs(a)dundee.ac.uk<mailto:g.m.carstairs@dundee.ac.uk> [University of Dundee Facebook]<http://uod.ac.uk/sig-fb> [University of Dundee Twitter] <http://uod.ac.uk/sig-tw> [University of Dundee LinkedIn] <http://uod.ac.uk/sig-li> [University of Dundee YouTube] <http://uod.ac.uk/sig-yt> [University of Dundee Instagram] <http://uod.ac.uk/sig-ig> [University of Dundee Snapchat] <http://uod.ac.uk/sig-sc> We're Scottish University of the Year again!<http://uod.ac.uk/sig-strapline> The Times / Sunday Times Good University Guide 2016 and 2017 The University of Dundee is a registered Scottish Charity, No: SC015096

2 3

PubChem
by Eric Pettersen 22 Jan '20

22 Jan '20

Hi all, As of tomorrow’s build, ChimeraX will be able to fetch PubChem entries, e.g. “open pubchem:2519” or “open 2519 from pubchem”. —Eric Eric Pettersen UCSF Computer Graphics Lab

1 0

Next/previous buttons for model display/activation?
by Oliver Clarke 21 Jan '20

21 Jan '20

Hi, I use the Next/Previous buttons in the lower portion of the Chimera GUI all the time for quickly cycling through maps/models (e.g. when inspecting the results of 3D classification). Would it be possible to bring these to the model panel on ChimeraX? Cheers Oli

2 1