- ChimeraX-users - RBVI Mailing Lists

Show palette range scale
by Gomez Barillas, Andrea 08 Feb '23

08 Feb '23

Dear ChimeraX developers, I've mapped sequence conservation into my protein structure by defining a specific attribute and I colored it using a specific palette. I was wondering how I can show in my model the scale of colors for the range I've stablished in my map. Maybe there is a command I can use to show the range I used for mapping and what the colors represent. Thank you for your help, Andrea

2 1

Re: [chimerax-users] Help getting rmsd value per residue of 2 similar structures.
by Elaine Meng 08 Feb '23

08 Feb '23

Hi Binh, This is almost the same question as asked yesterday on chimerax-users(a)cgl.ucsf.edu, so I have the same answer: <https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2023-February/004923.html> That answer assumes you are using Matchmaker to superimpose these structures first, which has an option to display the pairwise sequence alignment with RMSD values per column, which can then be written out, used for coloring, etc, as detailed in that answer. Note that this RMSD is only using CA atoms so for two structures, it is simply the distance between the 2 CA atoms. You can use the Sequence Viewer settings to make it use the 4 backbone atoms per residue instead (N,CA,C,O): <https://www.rbvi.ucsf.edu/pipermail/chimerax-users/2023-February/004923.html> Secondarily, remember that Chimera and ChimeraX are two different programs and if you are viewing help/answers for Chimera they may not pertain to ChimeraX. Finally, for the best chance of getting a good answer to ChimeraX questions in the future, please use chimerax-users(a)cgl.ucsf.edu unless you are including private data. Thanks! Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Feb 8, 2023, at 12:39 PM, Binh Nguyen <AnBinh.Nguyen(a)UTSouthwestern.edu> wrote: > > Dear Elaine, > > Is there a way to generate the rmsd per residue of 2 similar structures using chimeraX? I have searched through but I can only manage to get the overall RMSD. > > I have found this too but I have no idea how to get such information. > https://www.rbvi.ucsf.edu/pipermail/chimera-users/2019-February/015415.html > > Please help, thank you. > > B

2 1

Questions about MultiAlign Viewer
by Beate Aftret 06 Feb '23

06 Feb '23

Hi, I have some issues accessing the Multiaglin Viewer in ChimeraX. I’ve tried to look at this response: https://www.rbvi.ucsf.edu/pipermail/chimera-users/2019-February/015415.html . However, I’m unable to access it. I’m trying to access the multialign viewer so I can get individual RMSD values on structures compared using Matchmaker. Thank you in advance. Let me know if I need to give more detail. Kind regards, Beate Aftret

2 1

No Access to Personal Files
by Anna Popa 02 Feb '23

02 Feb '23

Good afternoon, I am a college student using your ChimeraX software to complete an assignment in my biochemistry course. I have downloaded your app to my HP Chromebook using the most recent Ubutun version. Despite being on my personal computer, ChimeraX cannot open the files needed from my computer. When I tried to find out why this is happening, I concluded that it might be a software issue because I wasn't even able to set up the ChimeraX app completely. I would greatly appreciate some guidance and assistance. Thank you, Anna Popa

2 1

Fwd: Your message to ChimeraX-users awaits moderator approval
by Eric Pettersen 02 Feb '23

02 Feb '23

> Begin forwarded message: > > From: Krishnan Raman > Subject: RE: Your message to ChimeraX-users awaits moderator approval > Date: February 2, 2023 at 9:47:12 AM PST > To: "chimerax-users-owner(a)cgl.ucsf.edu" <chimerax-users-owner(a)cgl.ucsf.edu> > > Hi guys > > is there a way to get structures + other numerical data into chimerax? > I get the structures using a sdf file. I want to get in someother data associated each structure. > > How to start multiple instances of chimerax from a html-commands file? > Thanks > Krish > CONFIDENTIALITY NOTICE > > This email, including any attachments, may contain confidential or legally privileged information that is intended only for the individual or entity to whom it is addressed. If you are not the intended recipient, please be advised that any dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please reply to the sender so that BioCryst Pharmaceuticals, Inc. can take corrective measures and then permanently delete this email and any attachment, including any printed copies. Thank you. >

3 5

Obtain electrostatic potential from PQR/DX via script
by Lohry, David 02 Feb '23

02 Feb '23

Hi everyone, I'm performing an analysis where I want to select different regions on a molecule and obtain a list of all of the electrostatic potentials from that region. My input is a PQR file with a DX file. These were generated from a PDB and APBS. The electrostatic potential can be viewed when the option "Report value at mouse position" is selected in the Surface Color tool (Tools...Volume Data...Surface Color...Options button) In the status bar at the bottom, it will show the value along with the coordinates. Is there a way to obtain this information via a ChimeraX command that I could script? Thank you!

3 3

Multi-chain single macromolecule .pdb file read as two molecules
by Lenye Dlamini 31 Jan '23

31 Jan '23

Hello, I have a homo-oligomeric model that I've refined using phenix and the ISOLDE tool in ChimeraX that's read during deposition as 2 separate molecules, a larger 14mer and a smaller tetramer. It's read as one molecule in Coot, Chimera and Pymol but read as two distinct molecules in ChimeraX exactly like the deposition. I found this curious and thought that perhaps you might have some idea of what's wrong with the file. There is nothing that appears obviously incorrect to me in the text of the .pdb file, all TER cards follow the chains and all amino acids and their identifiers are in sequence and correct. I'd appreciate any ideas you may have and I'm happy to send the file to you if you prefer. Thank you, Kind regards, Lenye Dlamini Disclaimer - University of Cape Town This email is subject to UCT policies and email disclaimer published on our website at http://www.uct.ac.za/main/email-disclaimer or obtainable from +27 21 650 9111. If this email is not related to the business of UCT, it is sent by the sender in an individual capacity. Please report security incidents or abuse via https://csirt.uct.ac.za/page/report-an-incident.php.

2 3

Fwd: EMDB-SFF segmentation file: application of transform 0 for image-to-physical projection
by Eric Pettersen 30 Jan '23

30 Jan '23

> Begin forwarded message: > > From: Tom Goddard <goddard(a)sonic.net> > Subject: Re: [chimerax-users] EMDB-SFF segmentation file: application of transform 0 for image-to-physical projection > Date: January 30, 2023 at 11:54:02 AM PST > To: Paul Korir > Cc: Martin Schorb > > Hi Paul, > > ChimeraX does not specify what distance units the open models use. For atomic structures and cryoEM map it is usually Angstroms. For light microscopy images it is often microns. For medical image scans (MRI, CAT) it is I think meters. The file formats for the data define the physical distance units, not ChimeraX. So if EMDB SFF provides a segmentation for say an MRC or CCP4 density map file the scaling of that density map in the ChimeraX graphics is taken from the file header which has a field "cell dimensions in Angstroms". If a segmentation of that density map is made that is say a bounding surface it might use x,y,z coordinates in Angstroms or it might use grid index units when it writes out a file, that would depend on the segmentation file format and the software that is writing the segmentation. In ChimeraX it always tries to scale the data into physical units so that different data sets, like an atomic structure and 3D image data have the correct relative scale. So ChimeraX never displays images using grid index units. > > So from what you say about EMDB SFF the first transform goes from grid index units to physical units and ChimeraX should apply that transformation to the segmentation data so that it has the same scaling as the map data that the segmentation was derived from. I see there is a function in the ChimeraX EMDB SFF file reader called "guess_scale_and_shift" that is trying to figure out what transform to apply, but it is just a hack and looks for any non-identity transform. > > https://github.com/RBVI/ChimeraX/blob/da72f2cd9b23c0c35a66122b7edc453d593ea… <https://github.com/RBVI/ChimeraX/blob/da72f2cd9b23c0c35a66122b7edc453d593ea…> > > And another comment in the code suggests it is doing that hack because it was needed for EMDB SFF test data EMDB 1547. > > If I understand you correctly ChimeraX should instead always apply the first transform from transforms_list. I can make that change. The main thing will be to test it on pairs of EMDB SFF segmentations and corresponding maps to make sure it produces the correct alignment. > > Tom > > >> On Jan 30, 2023, at 2:20 AM, Paul Korir via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu> wrote: >> >> Hi Tom/ChimeraX admin, >> >> Just to clarify: what are the units of physical space in ChimeraX: Å or nm? >> >> Kind regards, >> >> Paul K. Korir, PhD >> 3D Visualisation Lead >> CS3DB >> EMBL-EBI >> >> On 30/01/2023 08:51, Paul Korir wrote: >>> Hi Tom, >>> >>> To the best of my understanding, ChimeraX displays images and associated segmentations in physical space not image space. However, segmentations are performed in image space. EMDB-SFF uses the first transform in the transforms_list field (with id=0) as the image-to-physical transform. (https://emdb-empiar.github.io/EMDB-SFF/v0.8.0.dev1/segmentation_da_xsd.html… <https://emdb-empiar.github.io/EMDB-SFF/v0.8.0.dev1/segmentation_da_xsd.html…>) >>> >>> I've tested with two files having the same segmentation but different values for transform 0 and they render the same. >>> >>> Could you please implement this feature in ChimeraX? >>> >>> Kind regards, >>> >>> -- >>> Paul K. Korir, PhD >>> 3D Visualisation Lead >>> CS3DB >>> EMBL-EBI >>> >> _______________________________________________ >> ChimeraX-users mailing list >> ChimeraX-users(a)cgl.ucsf.edu >> Manage subscription: >> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users >

1 0

EMDB-SFF segmentation file: application of transform 0 for image-to-physical projection
by Paul Korir 30 Jan '23

30 Jan '23

Hi Tom, To the best of my understanding, ChimeraX displays images and associated segmentations in physical space not image space. However, segmentations are performed in image space. EMDB-SFF uses the first transform in the transforms_list field (with id=0) as the image-to-physical transform. (https://emdb-empiar.github.io/EMDB-SFF/v0.8.0.dev1/segmentation_da_xsd.html… <https://emdb-empiar.github.io/EMDB-SFF/v0.8.0.dev1/segmentation_da_xsd.html…>) I've tested with two files having the same segmentation but different values for transform 0 and they render the same. Could you please implement this feature in ChimeraX? Kind regards, -- Paul K. Korir, PhD 3D Visualisation Lead CS3DB EMBL-EBI

1 1

How to license AlphaFold with ChimeraX
by Asma Rehman 28 Jan '23

28 Jan '23

Hi, I'm currently a chimeraX user and would like to also use AlphaFold along with it. I was wondering if you could help us with directions. I appreciate your support. Thanks, Asma

2 1