- ChimeraX-users - RBVI Mailing Lists

Source Code
by Dario Eltzner 29 May '20

29 May '20

Hello, I was interested in reading the ChimeraX source code but found only this site https://www.cgl.ucsf.edu/chimerax/docs/devel/conventions.html which references a git repo that is password protected. Is the source code not freely available? Best Wishes Dario Eltzner

2 2

Re: [chimerax-users] 3D stereo lighting is not the same as mono
by Tom Goddard 27 May '20

27 May '20

Try "camera sbs" and see if shadows look right. If they do look ok, but stereo does not then it will require some debugging with a stereo system that reproduces the problem and I am not able to test that until quarantine is over. Tom > On May 26, 2020, at 10:01 AM, Kenneth Satyshur <kenneth.satyshur(a)wisc.edu> wrote: > > Thanks. I will check out the versions as they come out. Hopefully this can be fixed. I can try a VR and see what is up with the display if anything. > kas > > > Kenneth A. Satyshur, M.S., Ph.D. > Senior Scientist, > Department of Bacteriology: College of Ag and Life Sciences; > Departments of Bio Molecular Chemistry, > Neuroscience, Oncology, and Carbone Cancer Center: > School of Medicine and Public Health; > and the School of Pharmacy > University of Wisconsin-Madison > Madison, Wisconsin, 53706 > 608-215-5207 > From: Tom Goddard <goddard(a)sonic.net> > Sent: Tuesday, May 26, 2020 11:48 AM > To: Kenneth Satyshur <kenneth.satyshur(a)wisc.edu> > Cc: chimerax-users(a)cgl.ucsf.edu <chimerax-users(a)cgl.ucsf.edu> > Subject: Re: [chimerax-users] 3D stereo lighting is not the same as mono > > I made a bug report for this > > https://www.rbvi.ucsf.edu/trac/ChimeraX/ticket/3315 <https://www.rbvi.ucsf.edu/trac/ChimeraX/ticket/3315> > > I am not able to test stereo, don't have a computer that can do it. For me other two eye modes like VR and SBS (side-by-side) have correct shadows. The problem may be a graphics driver bug effecting shadow calculation. Or it might be a bug in ChimeraX in how OpenGL quad-buffering are used. > > Tom > > >> On May 23, 2020, at 4:39 PM, Kenneth Satyshur <kenneth.satyshur(a)wisc.edu <mailto:kenneth.satyshur@wisc.edu>> wrote: >> >> I am using version 1.0 in Centos7 with Nvidia 3D glasses and K4000 video card. I do all my work in 3D stereo. Especially density fitting. I noticed that the lighting is different in mono vs stereo mode. When i go to stereo mode with >> >> camera stereo >> >> the image is in stereo but the "full" lighting is on and the image is very dark with shadows. If I switch to 'simple' it is bright and has weak shadowing. Switching to 'soft' the image is flat black and can only be seen with white background but contains no atoms. I think this is a bug. >> But a Great improvement in rendering of images. >> thanks >> kas >> p.s. old chimera does stereo very well on my system >> Linux kenworkathome 3.10.0-1127.el7.x86_64 #1 SMP Tue Mar 31 23:36:51 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux >> >> >> Kenneth A. Satyshur, M.S., Ph.D. >> Senior Scientist, >> Department of Bacteriology: College of Ag and Life Sciences; >> Departments of Bio Molecular Chemistry, >> Neuroscience, Oncology, and Carbone Cancer Center: >> School of Medicine and Public Health; >> and the School of Pharmacy >> University of Wisconsin-Madison >> Madison, Wisconsin, 53706 >> 608-215-5207 >> _______________________________________________ >> ChimeraX-users mailing list >> ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> >> Manage subscription: >> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users <https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users>

2 3

3D stereo lighting is not the same as mono
by Kenneth Satyshur 26 May '20

26 May '20

I am using version 1.0 in Centos7 with Nvidia 3D glasses and K4000 video card. I do all my work in 3D stereo. Especially density fitting. I noticed that the lighting is different in mono vs stereo mode. When i go to stereo mode with camera stereo the image is in stereo but the "full" lighting is on and the image is very dark with shadows. If I switch to 'simple' it is bright and has weak shadowing. Switching to 'soft' the image is flat black and can only be seen with white background but contains no atoms. I think this is a bug. But a Great improvement in rendering of images. thanks kas p.s. old chimera does stereo very well on my system Linux kenworkathome 3.10.0-1127.el7.x86_64 #1 SMP Tue Mar 31 23:36:51 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux Kenneth A. Satyshur, M.S., Ph.D. Senior Scientist, Department of Bacteriology: College of Ag and Life Sciences; Departments of Bio Molecular Chemistry, Neuroscience, Oncology, and Carbone Cancer Center: School of Medicine and Public Health; and the School of Pharmacy University of Wisconsin-Madison Madison, Wisconsin, 53706 608-215-5207

2 1

Recreating views
by Martin Montgomery 22 May '20

22 May '20

Hi, I have a session file that contains everything I need to make figures for a paper. With pymol, I saved the get_view matrix in a text file for each view which meant that with one session file I could easily recreate the views if I needed to go back and tweak a figure. In ChimeraX, the closest way that I found to replicate this was to use named views. Am happy to supply a session file if it helps also happy to be educated if there is a better way of doing this, especially as now the ChimeraX session files can get rather large. Cheers MGM Martin G Montgomery Senior Scientist ATP Synthase Group MRC Mitochondrial Biology Unit University of Cambridge The Keith Peters Building Cambridge Biomedical Campus Hills Road Cambridge Great Britain CB2 0XY www.mrc-mbu.cam.ac.uk <http://www.mrc-mbu.cam.ac.uk/>

5 6

Save/restore scene?
by Oliver Clarke 20 May '20

20 May '20

Hi ChimeraX-ers, Is there currently an equivalent of the "scene" command from Chimera? It was super helpful to be able to quickly switch between different (and often complex) representations of a molecule. I know the view command for saving and restoring orientations, and the "name" command for saving selections, but I can't find an equivalent of scene. I'm guessing it's not yet implemented, but count me as one vote for porting it over after 1.0 is out the door, it was super helpful in Chimera! Cheers Oli

2 1

Feature suggestion - show color code in picker?
by Oliver Clarke 19 May '20

19 May '20

Hi, I love the color editor in ChimeraX, it is much nicer than the one in Chimera and is super useful! One minor suggestion - would it be possible to add a dynamically updated label showing in the editor the current color code? This sometimes shows up in the log but not always, and it is useful to have easily copy-able for use in scripts and aliases. Cheers Oli

3 4

Cartoon smooth loops chimX
by Dominik Hrebík 19 May '20

19 May '20

Hi all! Is there any possibility to smooth loops in cartoon representation in ChimeraX? I can't find it in the user guide. Something similar to pymol's cartoon_smooth_loops,1: https://pymolwiki.org/index.php/Cartoon_smooth_loops Best, Dominik -- ################################## Dominik Hrebik Laboratory of Structural Virology CEITEC, Masaryk University Kamenice 5 / A35 Brno, 625 00, Czech Republic Phone: +420 549 49 7764 <%2B420%20549%2049%207756> ##################################

2 1

Focus in ChimeraX
by Luca Pellegrini 18 May '20

18 May '20

Hi, What is the ChimeraX equivalent to the Focus command in Chimera? I have selected a portion of a structure, and would like to bring it into focus without dragging it into view. Also Focus would automatically set the selection as the pivot point. Best wishes, Luca Luca Pellegrini, PhD Department of Biochemistry University of Cambridge Cambridge CB2 1GA lp212(a)cam.ac.uk

3 2

Turntable rotation
by Scott, Brandon L. 16 May '20

16 May '20

I would like to create an animation where the camera is spun around at a constant azimuthal angle so the object appears to spin on a tabletop. Currently, when I use roll, when it spins to the backside I see underneath the model rather than remaining on top. Any help is greatly appreciated. -Brandon ____________________ Brandon Scott, PhD CZI Imaging Scientist, Research Assistant Professor SDSMT, Nanoscience and Nanoengineering

3 4

Re: [chimerax-users] transition from Chimera
by Tom Goddard 15 May '20

15 May '20

Hi Jerome, Putting that "open instructions,html" in your startup preferences is a nice way to show an HTML interface that could have links that execute commands in ChimeraX. I had not thought of that use. Tom > On May 15, 2020, at 1:37 AM, MUTTERER Jerome (IBMP) <jerome.mutterer(a)ibmp-cnrs.unistra.fr> wrote: > > Hi Tom, > Thank you very much for your answers. > I didn't try the drag and drop emulation approach, but I confirm the "remotecontrol rest" option at startup works nicely. > I added the following 2 lines to the Favorites>Settings...>Startup tab > > remote rest start port xxxxx > open instructions.html > > and it makes it easy to operate. > Thanks a lot! > > Jerome > > > De: "Tom Goddard" <goddard(a)sonic.net> > À: "MUTTERER Jerome, IBMP" <jerome.mutterer(a)ibmp-cnrs.unistra.fr> > Cc: chimerax-users(a)cgl.ucsf.edu > Envoyé: Mardi 12 Mai 2020 20:14:39 > Objet: Re: [chimerax-users] transition from Chimera > > Hi Jerome, > > We don't have the chimerax --send option to open files in an already running ChimeraX, although we plan on adding it. > > I have two ideas for how to do this in current ChimeraX. One is to use the remotecontrol command to tell ChimeraX to accept commands via http. In ChimeraX I enable this with command > > remote rest start port 58123 > > Then http requests can run commands in ChimeraX. The http url can be entered in a web browser or from a script. From a script you could use curl or wget programs, for example, > > curl http://localhost:58123/run?command=open+/Users/goddard/Downloads/ChimeraX/P… <http://localhost:58123/run?command=open+/Users/goddard/Downloads/ChimeraX/P…>.cif > > You could make ChimeraX alway enable http requests by putting the "remote..." command in ChimeraX Settings/Preferences under the Startup tab "Execute these commands at startup". > > The other idea I have is simpler but did not work in my test. ChimeraX accepts files dragged and dropped on the application. On macOS (and probably Linux and Windows) I should be able to run a shell command that says drop this file on ChimeraX. On Mac the shell command looks like > > % open -a /Applications/ChimeraX.app ~/Downloads/ChimeraX/PDB/1a0m.cif > > That worked for starting ChimeraX and showing the first file. But when I run it again to open a different it merely raised ChimeraX and did not open the new file. That is a bug. I've made a bug report for it. I don't know the equivalent commands on Linux and Windows and whether the would work. > > Tom > > > On May 12, 2020, at 1:50 AM, Jerome Mutterer <jerome.mutterer(a)ibmp-cnrs.unistra.fr <mailto:jerome.mutterer@ibmp-cnrs.unistra.fr>> wrote: > > Dear all, > I'm trying to transition from Chimera to ChimeraX, but my workflow relies on passing scripts to an open, with GUI, instance of Chimera using --send > https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/options.html#send <https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/options.html#send> > > I see that this is not described here: > https://www.rbvi.ucsf.edu/chimerax/docs/devel/apps/ChimeraX/ChimeraX.html <https://www.rbvi.ucsf.edu/chimerax/docs/devel/apps/ChimeraX/ChimeraX.html> > > Is that still available somehow in ChimeraX? > Thanks for any input. > Sincerely, > Jerome. > > -- > Jerome Mutterer > CNRS - Institut de biologie moléculaire des plantes > 12, rue du Général Zimmer > 67084 Strasbourg Cedex > www.ibmp.cnrs.fr <http://www.ibmp.cnrs.fr/> > > _______________________________________________ > ChimeraX-users mailing list > ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> > Manage subscription: > https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users

1 0