- ChimeraX-users - RBVI Mailing Lists

Question about Calphas and line between them
by Yazan Abbas 21 Aug '19

21 Aug '19

Hi, While looking through the user guide, I came across an option to draw a line between consecutive Calphas that are displayed. I made a mental note to use that option in my figure, but I failed to bookmark it or write down what the command was. I've been through the user guide several times again, but can't seem to find it. Would appreciate it if someone could jog my memory. Thanks, Yazan

2 1

discontinuous helices in tube mode
by Yazan Abbas 19 Aug '19

19 Aug '19

Hi, Is there a parameter that can be changed to control how "cartoon style modeH tube" draws a continuous helix? In my model, most of my helices are broken up into 2-4 discontinuous helices (especially the long, curved ones). In pymol (cylinders mode) and chimera (pipes and planks depiction), the same helices are drawn as a single, continuous helix, suggesting that my model is ok. I tried adding a HELIX definition in the pdb file, and also tried forcing chimeraX to draw a helix using the setattr command, but neither strategy has helped. I also tried playing with the dssp energyCutoff with no success. Thanks, Yazan

2 3

Question about "color sample" command
by Sean Connell 19 Aug '19

19 Aug '19

Hello I have a question about the "color sample" command (Chimerax-daily version 0.91 2019-08-14) and its use in coloring a volume based on the values of a second volume (i.e. local resolution maps from relion) The command works great when I load the volumes in to chimerx but after I load them I want to transform them using matchmaker and the bring option so that all the volumes I want to view are in a common frame of reference. After I transform the volumes though if i re-issue the "color sample" command it seems to color the first volume according to the values in the un-transformed second volume I am guessing? Is this correct and expected or am I just doing something wrong? if this is what is happening is there a way to force color sample to read the transformed values or to re-sample the transformed maps so they are correctly read? Also the output of the color sample command reports the min,max and mean values, just to confirm this corresponds to the values of all the voxels displayed at the current threshold level right? Finally is there a way to show a key for the coloring in chimerax? Many thanks for any advice you can provide. Sean

3 3

Fly function in ChimeraX - 2
by Gabor PAPAI 16 Aug '19

16 Aug '19

Dear developers, I’ve seen that two years ago the fly command from Chimera was not implemented in ChimeraX. Is it implemented now? Or does ChimeraX have a similar function? I tried the view command inside the perframe function, unfortunately this didn’t result in a smooth transition between two named views. The only option I have now is to translate, zoom and rotate the scene with the individual commands, however this is quite tedious to set. Best regards, Gabor --- Gabor Papai IGBMC Integrated Structural Biology 1, rue Laurent Fries, Bp 10142 67404 Illkirch, France Tel: +33-3-69485288

2 1

RESMAP output superposition.
by chimerax-announce-owner＠cgl.ucsf.edu 15 Aug '19

15 Aug '19

From: Shahid Khan <outlook_CD0472DE47DC92D6(a)outlook.com <mailto:outlook_CD0472DE47DC92D6@outlook.com>> Subject: RESMAP output superposition. Date: August 14, 2019 at 7:33:59 PM PDT Hello The python script for mapping the RESMAP local resolution output does not work in ChimeraX. Has anybody modified it so that it does? Or written a new script with the same purpose for ChimeraX. Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

2 1

Understanding the output of the align command
by Yazan Abbas 14 Aug '19

14 Aug '19

Hi, I am trying to make a movie to rotate density in a manner that follows rotation between two atomic coordinates. To do that, I am aligning the two models and using the reportMatrix output to inform turn and move commands in order to transform the density. However, I am encountering some difficulty, and I'm not sure if this is related to bugs or my lack of understanding. For example, if I want to move from the position of model #1 to model #2, "align #1/b toAtoms #2/b move nothing reportMatrix true" produces the following: *Axis 0.11 -0.018 0.99Axis point 166 190 0Rotation angle (degrees) 108Shift along axis -0.24* I would think my turn command should be *turn 0.11,-0.018,0.99 108 models #1 center 166,190,0* But that doesn't work. I can get it to work if I assume that the reported axis is x,z,y instead of the expected x,y,z. Also, I have to use a rotation angle of -108 instead of 108. I'm not sure if I am using the axis point value correctly though, is it correct to use that as my center of rotation? It's location (166, 190, 0) places at the top of the box, which seems unusual to me. And finally, would I use this same information in a move command (i.e. move axis distance(shift), as reported by the align command? Many thanks in advance, I hope explained this clearly. Best, Yazan

3 5

Morphing atomic models and volumes in a single movie
by Yazan Abbas 05 Aug '19

05 Aug '19

Hi, I am trying to create a movie that is morphing between 3 atomic models while simultaneously morphing between the 3 corresponding volumes. The following is my script for recording this movie: *set max 25windowsize 1080 1080view frame1movie record supersample 3wait 1volume morph #12,13,14,15 frames 181 playStep 0.005524861878453038 constantVolume true modelId #16perframe "surface dust #16 size 40" frames 181coordset #10 1,181wait 181movie stopmovie encode test_full.mp4 quality high* There are 4 maps in my morph, but the fourth map is simply a copy of the first in order to mimic the *wrap true* option of the atomic model morph. I am encountering the following issue during the volume morph step: somewhere in between the morph between volume #14 and #15, the map disappears for a fraction of a second in the movie. I suspect its because of a calculation/waiting issue, because if I record the movie using filtered versions of the volumes (*volume guassian sDev 2*), I don't have the same issue. Am I correct in my interpretation of the issue? Is there a way to modify my recording script to avoid this? Thanks, Yazan

2 1

pixel size
by Yazan Abbas 31 Jul '19

31 Jul '19

Hi, I am trying to create a scale bar using the following method: 1. camera is set to ortho 2. save image image.png width 4000 height 4000 transparentBackground true 3. check pixel size in chimeraX using the zoom command (which shows Pixel size at center of rotation is 0.178) 4. in imageJ, set the scale to be 0.178Å/pixel which turns into 5.618 pixels/Å 5. Show scale bar of desired in length in ImageJ However, the resulting scale bar looks unusually small given the dimensions of my particle. Have I misunderstood something about the pixelSize settings? The user guide doesn't say anything about pixelSize when one of or both of width and height are specified in the same image command, so I assumed the pixel size of the saved image would be the same as in the graphics window. Thanks, Yazan

2 3

Runing multiple command lines in ChimeraX
by Marie Locard-Paulet 26 Jul '19

26 Jul '19

Hello, I am running ChimeraX version 0.9 (2019-02-16) on a Mac (macOS Mojave version 10.14.6). It works fine, and I can work by adding commandes in the command “box” in the bottom. But I would like to open a text file with multiple ChimeraX command lines (for reproducibility and gain of time). I saw the command “open” that should open a document with the suffix “.com” or “.cmd”. It doesn’t work in my hands. It says it does not recognise the suffix. Is there something I am missing? Could you please help? Kind regards, Marie. --------------------------- Marie Locard-Paulet NNF Center for Protein Research Faculty of Health Sciences University of Copenhagen, Denmark

2 1

ChimeraX Side View
by Elaine Meng 19 Jul '19

19 Jul '19

In response to a question about Side View... From: Elaine Meng <meng(a)cgl.ucsf.edu> Subject: Side View Date: July 19, 2019 at 10:34:44 AM PDT Hi Zhijie, Thanks for your registration comments! You will be happy to know that ChimeraX does have Side View. You can choose it from the menu: Tools… General. <http://rbvi.ucsf.edu/chimerax/docs/user/tools/sideview.html> To make a tool (Side View, etc.) start automatically every time you start ChimeraX, right-click in that tool (or Ctrl-click on some systems) to show the context menu, and from that menu choose “Start at ChimeraX Startup” <http://rbvi.ucsf.edu/chimerax/docs/user/window.html#context-menu> <http://rbvi.ucsf.edu/chimerax/docs/user/window.html#tool-context>

1 0