- ChimeraX-users - RBVI Mailing Lists

Molecular Dynamics Viewer
by James Starlight 16 Jul '19

16 Jul '19

Dear ChimeraX users! I would like to make a movie of molecular dynamics trajectory that has been pre-converted to pdb format (totally 250 frames). 1) Firstly, I have a problem with the recognition of the SS elements of that ensemble in ChimeraX, where each snapshot looks just like a mixture of points ( i tried to use dssp but it did not solve the issue). At the same time the snapshots looks fine in another viewers including UCSF Chimera (not X) 2) If I have a pdb of the same protein with mapped B-factors and then I colored it using color byattribute bfactor palette rainbow range 2,100 2) would it be possible to map the trajectory to that pdb in order to see the motions (observed in MD) mapped onto the structure that has been coloured by b-factors? Thanks for help!

3 15

session files do not save "color zone" command actions
by Rasmus Kock Flygaard 15 Jul '19

15 Jul '19

Hi all, I'm using chimerax-daily-build (downloaded two weeks ago, Chimerax-0.91). I am using a model to color EM density maps per subunit using the "color zone ..." command, but when I save Chimerax session files these colored zones are not saved and I have to redo all of them to fully restore a session. Is there any way to include these colored zones in the saved sessions files? Kind regards, Rasmus ------------------------------------ Rasmus Kock Flygaard, Ph.D Postdoc, Amunts' Lab SciLifeLab, Stockholms University Sweden

2 1

MLP value of the ASP and GLU carboxylate
by Zhijie Li 12 Jul '19

12 Jul '19

Hello, I noticed that the lipophilic atomic potentials of OD2 and OE2 are set to very positive values in mlp.py: 'ASP': {'C': -0.54, 'CA': 0.02, 'CB': 0.45, 'CG': 0.54, 'N': -0.44, 'O': -0.68, 'OD1': -0.68, 'OD2': 0.53} 'GLU': {'C': -0.54, 'CA': 0.02, 'CB': 0.45, 'CD': -0.54, 'CG': 0.45, 'N': -0.44, 'O': -0.68, 'OE1': -0.68, 'OE2': 0.53}, As as result the hydrophobic surface representation always show hydrophobic patchs on the carboxylates, which look quite odd to me. Is there a justification for this setting? In addition, aren't the two oxygens in the carboxylate equal considerting that they are in resonance? Zhijie

3 5

mesh lineThickness
by Yazan Abbas 12 Jul '19

12 Jul '19

Hi, In chimera the volume mesh lineThickness option could be changed. I can't seem to find the equivalent option in chimeraX. Is it possible to change the thickness of mesh lines? Thanks, Yazan PS apologies if you received this message twice, there was an error in my browser when first sent...

2 2

WebGL apps still in the pipeline?
by Oliver Clarke 11 Jul '19

11 Jul '19

Hi, Loving the regular improvements to ChimeraX! Just wondering regarding a web viewer - the original roadmap for chimeraX mentioned “WebGL apps” (http://www.rbvi.ucsf.edu/chimera/data/adcom15/chimera2.html <http://www.rbvi.ucsf.edu/chimera/data/adcom15/chimera2.html>), and original Chimera had a limited capacity to export scenes as interactive html files. Is this still something that is in the pipeline for ChimeraX? I would really love to be able to export ChimeraX scenes in a format that I can share on the web, without the need for users to download and know how to use ChimeraX. Ideally the user would be able to rotate, zoom and slab, but perhaps not translate - that is, the center of rotation would be fixed. The idea would be to enable sharing of “interactive figure” kind of views of the molecule/map (perhaps allowing switching between multiple scenes/views within one session). Cheers Oli

2 1

Appearance of thick edges
by Yazan Abbas 11 Jul '19

11 Jul '19

Hi all, While playing around with lighting settings, thick black lines appear on the edges of my model (picture attached) that do not go away when I reset lighting conditions. Is it a "feature" or a bug? I tried playing around with all or most of the lighting options to find one that would get rid of them, but that didn't work. Thanks, Yazan

3 5

feature request / suggestion
by Alexis Rohou 09 Jul '19

09 Jul '19

Hello, Apologies if this already exists, but I'd like to suggest a new option to the show/hide command: show /spec/ toggle which would behave like the toggle option of volume (one of my favorite chimeraX features by far), but would work on atomic models. Within the spec, anything currently shown would become hidden, and vice versa. Cheers, Alexis

3 3

Re: [chimerax-users] [Chimera-users] Using ChimeraX in no-gui mode
by James Starlight 08 Jul '19

08 Jul '19

Hi Greg, sorry for some delay :-) Actually I just checked and indeed, there is still problem with rendering of the images with chimera-X using here is the detailed output if it would help chimerax-daily --offscreen --nogui "${output}/!temp/chimeraX.${pdb_name}.cxc" INFO: Offscreen rendering is not available. INFO: module 'OpenGL.osmesa' has no attribute 'OSMESA_DEPTH_BITS' INFO: UCSF ChimeraX version: 0.9 (2019-04-03) INFO: © 2016-2019 Regents of the University of California. All rights reserved. INFO: Executing: open /home_pers/novikov/Bureau/test/test/!temp/chimeraX.0476.cxc INFO: Executing: open /home_pers/novikov/Bureau/test/test/!temp/B-factors_0476.pdb INFO: Summary of feedback from opening /home_pers/novikov/Bureau/test/test/!temp/B-factors_0476.pdb --- _warning_ | Ignored bad PDB record found on line 2 REMARK THIS IS A SIMULATION BOX INFO: _B-factors_0476.pdb_ title: **Gallium Rubidium Oxygen Manganese Argon Carbon Silicon** [[more info...]](cxcmd:log metadata #1) INFO: Chain information for B-factors_0476.pdb #1 --- Chain | Description [ ](cxcmd:select :1-219 "Select chain") | [No description available](cxcmd:sequence chain #1/ "Show sequence") INFO: Executing: open /home_pers/novikov/Bureau/test/test/florence.pdb INFO: Chain information for florence.pdb #2 --- Chain | Description [ ](cxcmd:select #2:1-219 "Select chain") | [No description available](cxcmd:sequence chain #2/ "Show sequence") INFO: Executing: mmaker #1 to #2 INFO: Parameters --- Chain pairing | bb Alignment algorithm | Needleman-Wunsch Similarity matrix | BLOSUM-62 SS fraction | 0.3 Gap open (HH/SS/other) | 18/18/6 Gap extend | 1 SS matrix | | | H | S | O ---|---|---|--- H | 6 | -9 | -6 S | | 6 | -6 O | | | 4 Iteration cutoff | 2 INFO: Matchmaker florence.pdb, chain (blank) (#2) with B-factors_0476.pdb, chain (blank) (#1), sequence alignment score = 1131.8 STATUS: Matchmaker florence.pdb, chain (blank) (#2) with B-factors_0476.pdb, chain (blank) (#1), sequence alignment score = 1131.8 STATUS: RMSD between 194 pruned atom pairs is 0.859 angstroms; (across all 219 pairs: 2.266) INFO: RMSD between 194 pruned atom pairs is 0.859 angstroms; (across all 219 pairs: 2.266) INFO: INFO: Executing: hide #2 models INFO: Executing: wait ERROR: wait requires a frame count argument unless motion is in progress ERROR: wait requires a frame count argument unless motion is in progress INFO: Executing: dssp #1 INFO: Executing: zoom 1.3 ERROR: turn x 15 y 15 z -40 ERROR: ..........^ ERROR: Expected an integer >= 1 or a keyword ERROR: Expected an integer >= 1 or a keyword INFO: Executing: wait ERROR: wait requires a frame count argument unless motion is in progress ERROR: wait requires a frame count argument unless motion is in progress INFO: Executing: preset "'overall look'" publication INFO: Preset expands to these ChimeraX commands: _set bg white; set silhouettes t_ INFO: Executing: set silhouettes true INFO: Executing: set silhouetteColor indigo INFO: Executing: set silhouetteDepthJump 0.02 INFO: Executing: color byattribute bfactor palette rainbow range 2,100 INFO: 16875 atoms, 4661 residues, atom bfactor range 0 to 367 STATUS: 16875 atoms, 4661 residues, atom bfactor range 0 to 367 INFO: Executing: cartoon style width 2.4 thickness 0.50 xsection barbell INFO: Executing: 2dlabels create title text '"Cluster 0476"' color red font gothic xpos .01 ypos .90 size 36 INFO: Executing: lighting depthCueStart .4 depthCueEnd .8 INFO: Executing: lighting full intensity 1.4 shadows true qualityOfShadows finer INFO: Executing: save image /home_pers/novikov/Bureau/test/test/!plots/visu_0476.png format png width 600 height 600 supersample 4 transparentBackground false and this is my script open /home_pers/novikov/Bureau/test/test/!temp/B-factors_0472.pdb open /home_pers/novikov/Bureau/test/test/florence.pdb mm #1 to #2 hide #2 models wait dssp #1 #view zoom 1.3 turn x 15 y 15 z -40 wait # options for appearance preset 'overall look' publication # set bg powder blue set silhouettes t; set silhouetteColor indigo; set silhouetteDepthJump 0.02 color byattribute bfactor palette rainbow range 2,100 cartoon style width 2.4 thickness 0.50 xsection barbell # make info of the screen 2dlab create title text "Cluster 0472" color red font gothic xpos .01 ypos .90 size 36 # options for light light depthcuestart .4 depthcueend .8; lighting full intensity 1.4 shadows true qualityOfShadows finer save image /home_pers/novikov/Bureau/test/test/!plots/visu_0472.png format png width 600 height 600 supersample 4 transparentBackground false exit пн, 22 апр. 2019 г. в 23:38, Greg Couch <gregc(a)cgl.ucsf.edu>: > > Salut, > > Does ChimeraX work in offscreen mode for you now? I believe it is fixed. > > -- Greg >

2 3

Re: [chimerax-users] [Chimera-users] Cylinder coloring extension
by Elaine Meng 03 Jul '19

03 Jul '19

Hi Thomas, Chimera “pipes” are always a single color each. <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/pipesandplanks/pi…> However, our new program ChimeraX has a cylinder-helix representation in which each residue’s segment can be a different color. Like Chimera, ChimeraX is a free download for noncommercial use. Commands are similar but not identical between the two programs. <http://www.rbvi.ucsf.edu/chimerax/index.html> In ChimeraX, if I open 2gbp and from the menu apply preset “cylinders/stubs” and then preset “publication” I get this: ... and then command “color by bfactor palette rainbow” gives this: Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Jul 3, 2019, at 3:48 AM, Thomas Marcellino <marcellino.tom(a)gmail.com> wrote: > > Dear Chimera Team, > > I am aiming to color a stucture according to the B factor and represent it as a cylinder (pipes and planks) is there any possibility to apply different colors within the same cylinder or assign the coloring scheme to the cylinder representation in the same way as doing it with surface ? > > Looking forward to an answer, > Thank you for your time reading my suggestion. > > Thomas M

1 0

mclip - surface clipping per-model
by bertrand beckert 03 Jul '19

03 Jul '19

Hi Elaine, I just wonder if the option clipping per-model has also been introduced in ChimeraX like it is in chimera ( https://www.cgl.ucsf.edu/chimera/docs/ContributedSoftware/per-model/per-mod…) ? Apparently the command mclip doesn't seem to exist... Has it been replaced? Best Bertrand

2 1