- ChimeraX-users - RBVI Mailing Lists

Chimera X opening issues on windows machineGood Afternoon,
by Haroon, Shohaib (NIH/NICHD) [C] 01 Oct '24

01 Oct '24

Good Afternoon, Hope this email finds you well. I am reaching out to your regarding an issue after successfully installed the latest version of Chimera X on one of my user he is using windows desktop and not able to open it. Even though I tried it multiple versions same issue persist. I installed the same version on my laptop without any issues and working fine. Is there anything need to do differently so it can open on desktop. Much appreciated for your help Thank you Shohaib Haroon Desktop Support Technician Information Resources Management Branch Eunice Kennedy Shriver National Institute of Child Health and Human Development 6710B Rockledge Drive, Bethesda, MD 20817 cell:301-275-0276 Email: shohaib.haroon(a)nih.gov<mailto:shohaib.haroon@nih.gov>

2 1

Increasing ChimeraX speed?
by Altobelli, Chad 30 Sep '24

30 Sep '24

Hi, I love using ChimeraX to make morphs, but my protein is quite a large hexamer (500kda) and the progression through the coordset can be quite slow during playback. When I look at my Windows taskmanager, I can see that neither my CPU (12th Gen Intel i7-12700H), RAM, or GPU (NVIDIA RTX 3050 Laptop) are maxed out. Is there a way to speed up Chimera morphs? Thanks, Chad

2 7

Molecular Dynamics in ChimeraX
by Enrico Martinez 30 Sep '24

30 Sep '24

Dear ChimeraX users! I noticed that in ChimeraX there is no built-in molecular dynamics simulation engine as opposed to the older UCSF Chimera. Is it possible to use some visualization trick to deform slightly static coordinates of atomic selection introducing (visually) the impression that they move during movie recording ? Many thanks in advance Enrico

4 4

Software copyright consulting
by 姜恩誉 27 Sep '24

27 Sep '24

Hello, is the application of your Chimera X software for paper publication a non-commercial use？ Looking forward to your reply. Thank you 姜恩誉 2023111025(a)stu.njau.edu.cn

2 1

info distmat command
by NUR AIDA SAKINAH 27 Sep '24

27 Sep '24

Hi ChimeraX teams, Can you guide me to use the *atoms-spec* for info distmat command. I want the output in chimerax log to list out distances between drug compound and the amino acids side chains and only display the distances below than 4 A. For now, what i have got, the output include distances between atoms in the drug itself and atoms in the amino acids itself. The command that i have try are: 1. info distmat (protein & sideonly) | :dex ::num_distance< 4 2. info distmat (protein & sideonly) | :dex 3. info distmat (protein & sideonly) & (:dex) distance < 4 Hope you could help me with this. Regards with thanks, Aida.

2 2

Atoms command spec
by NUR AIDA SAKINAH 27 Sep '24

27 Sep '24

Hi ChimeraX teams, Can you guide me to use the *atoms-spec* for info distmat command. I want the output in the chimerax log to list out distances between *the drug compound and the amino acids side chains and only display the distances below than 4A*. For now, what I have got, the output includes distances between atoms in the drug itself and atoms in the amino acids itself and I don't want that. Only display distances between atoms of the drug and the amino acids side chains. The protein and drug details: PDBID= *4YVP* with drug compound *DEX* The drug binding site distance is below than *4A*. The command that i have try are: 1. info distmat (protein & sideonly) | :dex ::num_distance< 4 2. info distmat (protein & sideonly) | :dex 3. info distmat (protein & sideonly) & (:dex) distance < 4 Hope you could help me with this. Regards with thanks, Aida.

1 0

How to increase the font size of pseudobond labels
by Suhas Srinivasan 26 Sep '24

26 Sep '24

Dear ChimeraX Community, I was trying to increase the default font size of the very small labels displayed on the pseudobonds that are generated from the “distance” command. Selecting the pseudobond label and then using the command “label size 512” had no effect. Your help would be appreciated and thank you for your time. UCSF ChimeraX 1.8 macOS 14.7

2 1

ChimeraX download problem
by Sophie Scobell 25 Sep '24

25 Sep '24

Hi, I've been trying to download ChimeraX on my personal computer for the past two weeks and keep getting this error message: "Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator at root@localhost to inform them of the time this error occurred, and the actions you performed just before this error. More information about this error may be available in the server error log." I'm using a Mac and I've tried the MacOS download on both Safari and Chrome with the same issue. Any advice would be greatly appreciated, Thank you! Sophie

2 3

Re: Inquiry: Selecting Individual Electron Density Maps for Comparative Analysis
by Tom Goddard 25 Sep '24

25 Sep '24

Hi Yan, PDB 4ola is an X-ray structure so you could fetch PDB and the X-ray map (from the Electron Density Server) using ChimeraX commands open 4ola open 4ola from EDS The map is a unit cell and does not cover the PDB atom coordinates. To use the crystal symmetry to extend the map to cover the atom coordinates use ChimeraX command volume cover #2 atomBox #1 The x-ray map of course has other copies of the molecules packed together and if you want to see just the x-ray density near the atom coordinates you could use volume zone #3 near #1 range 3 For PDB 7sva which is a cryoEM structure with map at the EMDB with id 25446 you can open both with open 7sva open 25446 from emdb Converting the PDB files to maps gives a different result than looking at experimental results, and I'm not sure why you want to do that. But the ChimeraX molmap command will do that by adding up Gaussians at the atom positions. That does not give a good approximation to the experimental maps in most cases. All these commands are fully documented in the ChimeraX User Guide. Tom > On Sep 25, 2024, at 1:54 AM, Yan ZHANG 张艳 <zhangyan30(a)westlake.edu.cn> wrote: > > Hi Tom, > > Thank you for your response. I'll try to explain my situation more clearly. > > I am comparing two structures (PDB IDs: 4ola and 7sva). I want to use the "color near atoms" feature in ChimeraX to color the maps of both structures. However, 4ola is a crystal structure and is in MTZ format. I would like to display it in the same way as an MRC file. > > I hope this is clearer. My current solution is to convert the PDB file of 4ola to an MRC file directly. This approach seems to work, but I am unsure if it is acceptable. > > Thank you for your help. > > Best regards, > Yan > > 发件人: Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> > 日期: 星期三, 2024年9月25日 14:16 > 收件人: Yan ZHANG 张艳 <zhangyan30(a)westlake.edu.cn <mailto:zhangyan30@westlake.edu.cn>> > 抄送: chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> > 主题: Re: [chimerax-users] Inquiry: Selecting Individual Electron Density Maps for Comparative Analysis > > You don't often get email from goddard(a)sonic.net <mailto:goddard@sonic.net>. Learn why this is important <https://aka.ms/LearnAboutSenderIdentification> > Hi Yan, > > We might have advice if you can explain what you are doing more clearly. MRC files are real space maps and MTZ files contain Fourier space coefficients. > > Tom > > > On Sep 24, 2024, at 9:57 PM, Yan ZHANG 张艳 via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu> wrote: > > > Dear ChimeraX Team, > > I hope this message finds you well. > > I am writing to inquire whether it is possible to selectively choose individual electron density maps of a single model from the MTZ files containing crystallographic data. This capability would enable me to perform comparative analyses of the same structure obtained through different methods. Currently, I am facing a challenge as the MRC files cannot be aligned with the MTZ files. I am seeking your guidance on whether there is a solution or tool within ChimeraX that can assist me in this process. > > Your expertise and support in this matter would be greatly appreciated. I am looking forward to hearing from you at your earliest convenience. Thank you very much for your attention to this inquiry. > > Best regards, > > Yan Zhang > Westlake University > Email: zhangyan30(a)westlake.edu.cn <mailto:zhangyan30@westlake.edu.cn> > > > > _______________________________________________ > ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu > To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu > Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/

1 0

Ball representation for protein-ligand system
by Enrico Martinez 25 Sep '24

25 Sep '24

Dear ChimeraX users ! I've just found a small bug in the protein-ligand representation. if I try to change the representation of ball and sticks using: style protein ball size protein ballScale 0.18 it changes the ball representation for the both protein and ligand (e.g. defined as :lig in the system). While there is not problems with sticks: size protein stickRadius 0.12 size :lig stickRadius 0.18 So it can be applied selectively on the both selections Many thanks in advance for any suggestions ! Enrico

2 2