- ChimeraX-users - RBVI Mailing Lists

Molecule_to_sphere
by Noriega, Heather 05 Jun '24

05 Jun '24

Hello, I hope this email finds you well. I have a molecule that I created through the build feature in Chimera, and what I would like to do is just create a sphere of as many copies as it can fit to see the estimated encapsulation volume. However, there is no symmetry assembly to use the matchmaker and I was trying to use the sym command, but it isn't even recognizing the command. sym #1 i,222 sym #1 i, n25 Sym#1 i, 222r I have tried others with the center command, and I also tried to add copies false NewModel true at the end. What am I plugging in wrong? The molecule is saved as a pdb, and uploads no issue on ChimeraX. Thank you, Heather Noriega PhD-Pharmaceutical Science student Howard University heather.noriega(a)bison.howard.edu 520-203-1883

2 4

Push and pulling model/map towards/away
by Pranav Shah 05 Jun '24

05 Jun '24

Hi Team, Chimera used to have a really nice feature that allowed for a model to be pushed away or pulled towards the user. How do I access this feature in ChimeraX? Best, Pranav -- Pranav Shah Postdoctoral Research Fellow. Division of Structural Biology, Wellcome Trust Centre for Human Genetics, University of Oxford, Roosevelt Drive, Oxford OX3 7BN, UK

3 8

Selecting the N or C-terminus of every chain in a PDB file
by André Graça 05 Jun '24

05 Jun '24

Hi everyone! I could not figure this one out just yet, but it might be easy (?): I am interested to make a quick selection that targets the first or last atom of all the chains present in a given PDB file. /André Graça

2 1

Fetch many pdbs/maps from the pdb-redo?
by Francisco Murphy Pérez 05 Jun '24

05 Jun '24

Dear all I thought this was going to work, `open "1iee, 2blx, 2bly" fromDatabase redo format mmcif`... but it does not. I have many more ids that I want to open... Can I fetch them all with a single command? Thanks

2 2

Morph command for protein-ligand complexes
by Enrico Martinez 05 Jun '24

05 Jun '24

Dear ChimeraX users! I have a question about recording movie with the transitions between different conformations using morph command. Having five conformations for the same protein, after its supermpostiion using mm #2-5 to #1 I generated a trajectory with the transition using: morph #2,3,4,5,6 core 0.1 frames 100 wrap f rate linear And then recorded movie using: # start recording movie record size 3840,2160 supersample 1 coordset #7 1,400,1 computeSs true wait 400 My question is about morph command. Assuming that all 5 models are very well superimposed and the difference is only the bound ligand (which is different in every model!), would it be possible to include these different ligands in the final morphed trajectory, thus making a smooth transition between different binding poses ? Many thanks in advance ! Enrico

2 2

How to reproduce the output of "info" in python script?
by Artie Kushner 04 Jun '24

04 Jun '24

Hi there, hope you are all doing well I'm wondering if anyone has a good idea of how to reproduce the output of the *info* command in the GUI inside a python script. Precisely the *info* command without any specifiers s.t. that all models and submodels are listed with minimal info. Like the following: *...#1.87, 4v6x Cu, shown419 atoms, 421 bonds, 56 residues, 1 chains (Cu)#1.88, 4v6x Cv, shown419 atoms, 421 bonds, 56 residues, 1 chains (Cv)#1.89, 4v6x Cz, shown1741 atoms, 1769 bonds, 217 residues, 1 chains (Cz)* Perhaps there is a better way to do this, but my use case is splitting a bigger structure into multiple chains (as you can tell from above there are 89 chains in 4V6X). I'd like to be able to correlate chain IDs (ex. *Cz*) with the model identifiers (ex. *#1.89*) programmatically from within python to script against individual chains further. I'm sure there is more than one way to do it, but i haven't been able to find either so far. Most that i found is the model_info command: *from chimerax.list_info.util import spec, model_info...def test_func(session, structure: AtomicStructure): print(model_info(structure))**<<<Missing or invalid "structure" argument: must specify 1 atomic structure, got 89 for "#1".* *def register_ribrepr_command(logger): from chimerax.core.commands import CmdDesc, register from chimerax.atomic import AtomicStructureArg, Chain, Residue, Atom desc = CmdDesc( required = [("structure", AtomicStructureArg)], required_arguments = ["structure"], synopsis = "representation ", ) register("test_func", desc, test_func, logger=logger)* but it presupposes that I pass the model by spec I pass the "top-level" structure. It throws error saying that it contains 89 instead of 1 structures: *Missing or invalid "structure" argument: must specify 1 atomic structure, got 89 for "#1".* Any other way of getting at the correspondence dict between chains/"submodels" created with i.e. *`split chains`* and their chain_id's (aka *auth_asym_id* 's) in Python space would work for me. Perhaps there is a way to list all objects in the "Models" section (picture below)? Thanks in advance Artie [image: image.png]

2 2

Question/ GPCR complex
by Ranti Dev Shukla 03 Jun '24

03 Jun '24

Hello, Greetings from NIH, Maryland. I am trying to make FRET for G-proteins. I put CFP protein within G.alfa2 on a loop between two nearby helixes and YFP protein on the N-terminal of G-beta. I made the complex using Alphafold but how to see this complex along with the membrane? Is there some command for it please? I would appreciate your kind help. Thanks Ranti Best wishes, Ranti Dev Shukla Visiting Fellow, NIH, Rockville, MD Email: rantibio2(a)gmail.com *rantibio3(a)gmail.com <rantibio3(a)gmail.com>* Phone: +1 865-910-2985 *Teachers* make a lasting impact in the lives of their students

2 1

Rotation of the multi-model object using the symmetric axis
by Enrico Martinez 03 Jun '24

03 Jun '24

Dear Chimera-X users! I am dealing with the visualisation of a complex dimer where each monomer is defined as a separate model like #1 and #2. For visualisation purposes I need to rotate the input construct by 180 degrees with the axis of rotation in the middle between the two monomers to avoid the shift of the complex in the x-plane at the end. That's what I have tried: # turn on 180 deg during 10 sec roll y 0.72 250 center #1,2 protein wait 250 but the construct still shifted a bit towards one of the monomers. How could I do ii using the rotation axis, which would be in the center between them ? Many thanks in advance Enrico

3 4

Conversion of multiple files into PDB
by Enrico Martinez 03 Jun '24

03 Jun '24

Dear ChimeraX Users ! I am dealing with the analysis of multiple structural coordinates generated by AlphaFold for a target protein in *.cif extension. My goal is superimpose all the coordinates to the first model and save them in .pdb as separate files. So my script could be: open ./*.cif match #2-6 to #1 # probably there is a better solution # and some command for save What could be the solution to save all the coordinates in automatic way in separate pdb with the name patterns corresponded to the ID of these models ? Many thanks in advance Enrico

3 3

attributes from viewdockx.
by Krishnan Raman 31 May '24

31 May '24

Hi guys, * Make ViewDockX table information available as model attributes<https://rbvi.github.io/chimerax-recipes/vdx_attrs/vdx_attrs.html>. December 17, 2021 Used this Py to register my attributes into chimerax. Is there a way to display the attributes next to the model of the ligand? Thanks Krish Krishnan Raman Executive Director, Structural Biology BioCryst Pharmaceuticals CONFIDENTIALITY NOTICE This email, including any attachments, may contain confidential or legally privileged information that is intended only for the individual or entity to whom it is addressed. If you are not the intended recipient, please be advised that any dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please reply to the sender so that BioCryst Pharmaceuticals, Inc. can take corrective measures and then permanently delete this email and any attachment, including any printed copies. Thank you.

2 5