- ChimeraX-users - RBVI Mailing Lists

Difficulty unsubscribing
by BARRY E DEZONIA 25 Mar '24

25 Mar '24

I am trying to leave this email list and currently am unable to. I send email to: chimerax-users-leave(a)cgl.ucsf.edu And it processes and says my email barry.dezonia(a)wisc.edu is not a list member. That is because I signed up with bdezonia(a)wisc.edu.. My mail service treats them as equivalent but it only sends out on the incorrect email address. Can someone unsubscribe ndezonia(a)wisc.edu? I can't figure out how to get my email client to use my other email address as the sending address.

1 0

Adding lipid bilayers to chimerax movie
by Kevin Felt 25 Mar '24

25 Mar '24

Hello ChimeraX Users, I'm trying to make a movie in chimerax involving a membrane protein, and I would like to have some representation of where the inner and outer lipid bilayer leaflets are relative to the protein transmembrane region, ideally represented as phospholipids. Is it possible to do this within Chimerax? I've thought about encoding the movie to mp4 and then figuring out how to simply overlay a bilayer image onto the mp4 where I want with some other software , but I foresee resolution and scaling issues when doing that. Thank you! Sincerely, -- Kevin C. Felt PhD Candidate - Chakrapani Lab Department of Physiology and Biophysics School of Medicine Case Western Reserve University

2 2

Color a surface by seq_conservation of neighboring residues
by Esser, Lothar (NIH/NCI) [E] 22 Mar '24

22 Mar '24

Hi, my intention is to make a figure that maps the degree of sequence conservation of surrounding residues onto a surface drawn over the said inhibitor. I know I can color surfaces by distances and other parameters but I could not find out how to color a surface by properties of neighboring residues or atoms. Is there perhaps a way to convert an atom attribute like conservation into a map that then could be used to color a surface? Alternatively, I thought I could write out the calculated sequence conservation as a pdb file with say the b-factor column representing the sequence conservation. Unfortunately, that does not seem to be the case. Can you write atom attributes in any other way? - perhaps I missed that. If I had access to the sequence conservation values, I could copy them to the b-factor column of the inhibitor and color its surface by bfactor. Thanks for any advice. Lothar NIH

2 4

Visualisation of distances
by Enrico Martinez 21 Mar '24

21 Mar '24

Dear ChimeraX users ! I need to draw several distance vectors on the 3D structure. Could you provide me with an example of the commands that could automatically draw the distances between two selected atoms with some basic labels on it ? Many thanks in advance Enrico

3 8

Re: Trying to join two structures unsuccessfully
by Maja Divjak 18 Mar '24

18 Mar '24

Alternatively, I guess I could just cut this disordered domain into fragments, move them around and the rejoin them.... -----Original Message----- From: Maja Divjak Sent: Tuesday, 5 March 2024 11:44 AM To: ChimeraX Users Help <chimerax-users(a)cgl.ucsf.edu> Subject: RE: [chimerax-users] Trying to join two structures unsuccessfully Dear Elaine, No worries at all, I have received multiple replies, so it is working! Thank you for your response below. Basically, it seems what I'd like to do can't really be done in this way. In another conversation, someone mentioned the tug command. Could this yield what I'm hoping for please? The two ends I'm trying to join are indeed in separate models, so I tried the following command: tug #16/a:345-355 toAtoms #18/A:345-355 which gave the following error: For 0 tugged atoms expected 0 destination atoms, got 84 Would this be the correct approach (I've clearly got the syntax wrong) or is there really no way to do this in Chimera X? Thanks so much and best wishes, Maja PS. How do I join the member's list please? -----Original Message----- From: Elaine Meng <meng(a)cgl.ucsf.edu> Sent: Tuesday, 5 March 2024 11:33 AM To: Maja Divjak <Maja.Divjak(a)petermac.org> Cc: ChimeraX Users Help <chimerax-users(a)cgl.ucsf.edu> Subject: Re: [chimerax-users] Trying to join two structures unsuccessfully ! EXTERNAL EMAIL: Think before you click. If suspicious send to CyberReport(a)petermac.org Dear Maja, Apologies if you are getting multiple copies of this answer from me. I keep getting error messages that my reply could not be sent to the list! So, here is my third try. If you've been getting my previous messages (even though I don't think the rest of the list is), please ignore and pardon me for the spam! Adding a bond only works when the atoms are in the same model as each other (typically a structure opened from one PDB file is one model). Also simply adding a bond won't move anything. It will just make a long bond between the atoms in their current positions, or if you choose "reasonable" only, it won't add any bond because the bond would be too long to be reasonable. <https://rbvi.ucsf.edu/chimerax/docs/user/tools/buildstructure.html#bonds> You can see what model(s) you have by looking in the Model Panel: <https://rbvi.ucsf.edu/chimerax/docs/user/tools/modelpanel.html> If the two atoms are in two different models (typically opened from two different input files), the "join models" Peptide Bond option should work if you really have exactly two atoms selected, the peptide terminal "N" in one model and the peptide terminal "C" in the other model. As far as I can tell these two are selected in your image, so I couldn't say why you get an error message. If the atoms are in the same model as each other, however, it will not work. You would need to split the model so that they are in separate models first. You can try command "info atoms sel" to list in the Log what you have selected. In my "join peptide" test case I get the following, which confirms I have the correct atoms from two different models selected: info atoms sel atom id #1/A:29@C idatm_type Cac atom id #2/A:1@N idatm_type N3+ However, join models is not going to change the conformation of the peptide, it will just move one model (e.g. the entire green one if it has more atoms than the purple one) as a rigid body to form the specified bond with the other model. <https://rbvi.ucsf.edu/chimerax/docs/user/tools/buildstructure.html#join> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Resource for Biocomputing, Visualization, and Informatics Department of Pharmaceutical Chemistry University of California, San Francisco

2 6

How to change transparency of ladder mode of nucleic acids
by Yan ZHANG 张艳 15 Mar '24

15 Mar '24

Dear ChimeraX Team, I hope this email finds you well. My name is Zhang Yan, and I am a beginner of ChimeraX. I am writing to seek assistance regarding how to change transparency of ladder mode of nucleic acids in ChimeraX. Despite trying the command 'trans #1 60 all', I have been unable to achieve the desired effect. Could you please suggest an alternative solution or provide guidance on how to accomplish this task? Thank you for your attention to this matter. Best regards, Zhang Yan

2 3

Is the site down ?
by Marie PREVOST 15 Mar '24

15 Mar '24

Hello, I would like to install ChimeraX on my new laptop but the site seems to be down… Do you know if there are other option to download the installer ? Thank you for your help Best wishes ------- Marie Prevost, PhD Pierre-Jean Corringer’s lab ( site<https://research.pasteur.fr/en/member/marie-prevost/> ) Channel-Receptors Unit Institut Pasteur 25 rue du Dr Roux 75015 PARIS France +33 (0)1 53 55 15 06 (via Teams)

2 2

Question about interpreting variable ipTM scores
by David S. Fay 15 Mar '24

15 Mar '24

Hi, This question isn’t specifically about chimerax, but I hope it’s in the ball park. For most of the protein pairs I’ve tested using multimer, the ipTM scores for the 5-10 models are relatively consistent. For example all 0.2–0.3, or 0.75–0.85, or 0.4–0.6. But occasionally I’ll get one or two very high scores (>0.7) with the rest being low or somewhat randomly scattered. My instinct, of course, is to put more faith in scores when the models converge. At the same time, I don’t want ignore a potentially real interaction. So, I’m wondering how people interpret ipTMs when the numbers are variable between models. What is the reason that some protein pairs show this pattern? Is the good score(s) indicative or something real or a false positive. Are the bad scores indicative of true or false negative? Any thoughts, insights, and possible follow up approaches would be greatly appreciated! David

3 2

Downloading chimera
by Pincus, Seth 15 Mar '24

15 Mar '24

When I try to download Chimera (or connect to any Chimera site), I get the attached error message saying that “www.cgl.ucsf.edu has refused the connection”. I am running Chrome version 122 on a Mac Powerbook running OS12.7.1. My computer is owned by Montana State University and may have some additional security is installed. But I could find nothing in Chrome’s settings that would allow me to connect. Please respond bydirect e-mail, since I cannot get to the site to join the mailing list. Thank you, Seth Pincus, M.D. Professor Department of Chemistry and Biochemistry WWAMI Medical Program Montana State University Bozeman, MT 59717

2 1

only make selection highlighted
by 张楠 14 Mar '24

14 Mar '24

Dear developers, How does chimerax make the stick I selected highlighted and the carton in other areas blurred? I tried to click on view selected, but that only makes the back of the structure blur, not the front. May I ask how to operate to achieve the effect in the picture, only highlight stick？ Looking forward to your answer, thank you！ Best regards, Nan 张楠 zhangnan(a)nankai.edu.cn

2 2