February 2021 - ChimeraX-users - RBVI Mailing Lists

Refreshing ChimeraX - ChimeraX slows down after surface generation
by Y. Mutum 13 Feb '21

13 Feb '21

Hi I am currently using the ChimeraX Daily version - UCSF ChimeraX version: 1.2.dev202102050202 (2021-02-05). I am working with the pdb: 6j5k - a slightly large protein. If I 'hide atoms' and only 'show cartoons', I can navigate the protein visualisation using my mouse quite well - rotations, translations, zooming etc. However, once I generate the surface and then adjust the slider-side-view to adjust the views to visualise certain aspects of the protein, I have noticed that the computer becomes exceedingly slow to render even small rotations using the mouse - I can understand that this might be because the protein is big. However, the next part - if the surfaces were now deleted and only cartoons are shown in the same session (as in the beginning), the computer is exceedingly slow for mouse work - rotations, translations, slider-view etc. Is there some way to refresh and regain back this agility and remove this hysteresis? The only workaround seems to be to close ChimeraX and then reopen it again, but this is not slightly more tedious if we have to close and reopen every time I make a surface. The commands I have used are: open 6j5k; hide atoms; show cartoons surface #1 enclose #1 Then try to navigate... ~surface; show cartoons And then navigating again.... If there could be some work-around, or a new fix in the ChimeraX_version, it would be really helpful for working with large proteins seamlessly. Thanks Yaikhomba

3 2

Re: [chimerax-users] [Chimera-users] how to color an model by an attribute in chimerax
by sunyeping 10 Feb '21

10 Feb '21

------------------------------------------------------------------ From:孙业平 <sunyeping(a)aliyun.com> Send Time:2021年2月3日(星期三) 16:09 To:ChimeraX Users Help <chimerax-users(a)cgl.ucsf.edu> Subject:Re: [chimerax-users] [Chimera-users] how to color an model by an attribute in chimerax Hi Elaine, Thank you for you help. I will send chimerax questions to chimerax mail list next time. By changing the match mode from "1-to-1" to 'any', I can also color the protein according to the entropy.txt file. If you recheck the entropy.txt file you will find that there are quite a few residues have an entropy vavle around 0.3, in addition to the 0.788 residue. Could you tell me how to generate a color gradient bar base on the entropy values in the entropy.txt file in chimerax? Best regards, Yeping ------------------------------------------------------------------ From:Elaine Meng <meng(a)cgl.ucsf.edu> Send Time:2021年1月28日(星期四) 00:44 To:孙业平 <sunyeping(a)aliyun.com> Cc:ChimeraX Users Help <chimerax-users(a)cgl.ucsf.edu> Subject:Re: [Chimera-users] how to color an model by an attribute in chimerax Hi Yeping, **Please send ChimeraX questions to the chimerax-users(a)cgl.ucsf.edu address, *not* to chimera-users(a)cgl.ucsf.edu, because that makes people confused about which program we are talking about. Two more thoughts about your file: (1) you need to make sure the residue numbers in the file all match to your structure. I don't know which structure you are using so when I test it on some other structure that doesn't have all the same residue numbers, it does not work unless I change the match mode from "1-to-1" to "any". You might want to try using match mode "any". (2) looks like one residue has a high value 0.788 and all the others are very close to zero, so when I color the whole range the structure is all the same color (used for the low end) except for the one high-value residue. E.g. coloring by attribute entropy using palette blue-white-red makes the whole structure blue except for one residue red. Elaine > On Jan 27, 2021, at 8:25 AM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi Sun Yeping, > To use the "open" command to open defattr format you need ChimeraX daily build from Oct 30, 2020 or newer. Or if you are using ChimeraX 1.1, you can use the "defattr" command to open the file. Older ChimeraX than version 1.1 cannot read this file type at all. Changes and approximate dates are given in the Change Log: > > <https://www.rbvi.ucsf.edu/trac/ChimeraX/wiki/ChangeLog> > > The format is described here: > <https://rbvi.ucsf.edu/chimerax/docs/user/formats/defattr.html> > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > > >> On Jan 27, 2021, at 1:04 AM, sunyeping <sunyeping(a)aliyun.com> wrote: >> >> Dear Elaine, >> >> Thank you for your reply. The attribute file entropy.txt is available at >> >> https://drive.google.com/file/d/1oG0O4zKqw-uD5SeLTrAu16c3Jh8m3LG5/view?usp=… >> >> Could you please help check whether the format is correct"? >> >> I cannot figure out how to open this attribure file in chimera. When I input "open entropy.txt format defattr" in chimerax, I get the following error message: >> >> Invalid "format" argument: Should be one of 'aln', 'amira', 'apbs', 'bild', 'brix', 'ccd', 'ccp4', 'cellpack', 'cmap', 'cmd', 'collada', 'compiled python', 'cube', 'dcd', 'delphi', 'dicom', 'dock', 'dsn6', 'dv', 'emanhdf', 'fasta', 'fsc', 'gltf', 'gopenmol', 'hdf', 'hssp', 'html', 'ihm', 'images', 'imagic', 'imod', 'imodmap', 'ims', 'macmolplt', 'markers', 'mmcif', 'mmtf', 'mol2', 'mrc', 'msf', 'netcdf', 'obj', 'pdb', 'pdbqt', 'pfam', 'pif', 'pir', 'positions', 'priism', 'profec', 'pseudobonds', 'python', 'rsf', 'sdf', 'segger', 'session', 'sff', 'situs', 'smiles', 'spider', 'stl', 'stockholm', 'storm', 'swc', 'tom_em', 'trr', 'uhbd', 'uniprot', 'vtk', 'web fetch', 'xplor', or 'xtc' >> >> Could you tell me what is the correct way to open the file? >> >> Thank you, >> Best, >> Yeping >> ------------------------------------------------------------------ >> From:孙业平 <sunyeping(a)aliyun.com> >> Send Time:2021年1月26日(星期二) 11:53 >> To:chimera-users <chimera-users(a)cgl.ucsf.edu> >> Subject:[Chimera-users] how to color an model by an attribute in chimerax >> >> Dear all, >> >> I wish to color an model by an attribute in chimerax. The attribute is the entropy which is calculted by an external software. I wrote the entropy values of each residue in a text file (attr.txt) like the following: >> >> attribute: entropy >> match mode: 1-to-1 >> recipient: residues >> :1 0.0 >> :2 0.0014948 >> :3 0.0090952 >> :4 0.0004805 >> :5 0.1102497 >> :6 0.0095258 >> :7 0.0008226 >> :8 0.0042205 >> :9 0.0037255 >> :10 0.0006678 >> :11 0.0027988 >> :12 0.0193925 >> :13 0.0153925 >> :14 0.0052115 >> :15 0.0020136 >> .......... >> >> However, when I input the command "color byattr attr.txt", I get the following error information: >> "No known/Registered attribute attr.txt" >> >> Could anyone tell me what is the correct way to do this? >> >> With many thanks. >> >> Best regards >> > > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: https://plato.cgl.ucsf.edu/mailman/listinfo/chimera-users > ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

2 2

How to view SwissDock output in ViewDockX
by Tom Goddard 10 Feb '21

10 Feb '21

On Feb 9, 2021, at 3:56 AM, Michael Weber wrote: Hi, ... I use SwissDock for molecular docking experiments and there is an explanation on how to examine the output results in Chimera. Unfortunately all those workflows appear not to work in ChimeraX - are there any plans (or even already existing documentation which very well might have escaped my attention) to get these working in ChimeraX as well? Invoking ViewDockX from either the menu >tools>general>ViewDockX or by typing the command after having loaded a PDB structure plus the docked ligands just results in the message "No suitable models found for ViewDockX".

3 3

clear gallery of previous pdb files?
by Elghobashi-Meinhardt, Nadia 08 Feb '21

08 Feb '21

Dear ChimeraX help, Is there any way to clear the gallery view of all previous pdb files if it is getting too cluttered? Thank you! Nadia ----------------------------------------------- Dr. Nadia Elghobashi-Meinhardt Biomolecular Modeling Institute of Chemistry Technical University Berlin Straße 17. Juni 135 10623 Berlin

2 1

Identifying symmetry of a model
by Y. Mutum 06 Feb '21

06 Feb '21

Hi I am working with pdb id: 3cx5. This model is roughly C2 symmetric. Is there a way to identify the symmetry (or rough symmetry of a not-so symmetric model) of a pdb/ mmcif model and orient the symmetry axis to the axis perpendicular to the screen? On a similar note, say we select a 4 somewhat symmetry-related residues in this model and make 2 intersecting lines, is there a way to align these lines perpendicular to the perpendicular screen axis? Thanks Yaikhomba

2 6

error when using Blast Protein
by Elghobashi-Meinhardt, Nadia 05 Feb '21

05 Feb '21

Dear ChimeraX forum, I am trying to do a sequence search with the Blast Protein tool (MacOS). I have tried using various pdb structures/chains but am repeatedly getting the following error: "ValueError: not enough values to unpack (expected 2, got 1)" from ".../blastprotein/pdbinfo.py", line 206, in fetch_info entry, auth_cid = pcid.split('_') What is the correct usage of Blast Protein? Thank you! Nadia

2 3

ChimeraX tool installationg
by Yongcheng MU 04 Feb '21

04 Feb '21

Hello, Hope you are doing well. This is Yongcheng. I am writing this email because I am trying to install a Deep learning tool in ChimeraX, but I have some issues about it. I built and installed my code following the steps on the Chimera Guide website. I installed my code successfully, but when I run using command that I created, it hold some errors: *"RuntimeError: delayed command registration for 'CL_Tensorflow' failed (register_command() failed for command CL_Tensorflow in bundle ChimeraX-CL-Tensorflow:* *cannot import name 'cmd' from 'chimerax.CL_Tensorflow' (/Users/jackmu/Library/Application Support/ChimeraX/1.1/site-packages/chimerax/CL_Tensorflow/__init__.py))File "/Users/jackmu/Desktop/ChimeraX-1.1.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/chimerax/core/commands/cli.py", line 2142, in lazy_register* *raise RuntimeError("delayed command registration for %r failed (%s)" % (cmd_name, e))"* *"During handling of the above exception, another exception occurred:* *Traceback (most recent call last): File "/Users/jackmu/Desktop/ChimeraX-1.1.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/chimerax/cmd_line/tool.py", line 275, in execute cmd.run(cmd_text) File "/Users/jackmu/Desktop/ChimeraX-1.1.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/chimerax/core/commands/cli.py", line 2746, in run self._find_command_name(final, used_aliases=_used_aliases) File "/Users/jackmu/Desktop/ChimeraX-1.1.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/chimerax/core/commands/cli.py", line 2489, in _find_command_name what.lazy_register(cmd_name) File "/Users/jackmu/Desktop/ChimeraX-1.1.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/chimerax/core/commands/cli.py", line 2142, in lazy_register raise RuntimeError("delayed command registration for %r failed (%s)" % (cmd_name, e))RuntimeError: delayed command registration for 'CL_Tensorflow' failed (register_command() failed for command CL_Tensorflow in bundle ChimeraX-CL-Tensorflow:cannot import name 'cmd' from 'chimerax.CL_Tensorflow' (/Users/jackmu/Library/Application Support/ChimeraX/1.1/site-packages/chimerax/CL_Tensorflow/__init__.py))RuntimeError: delayed command registration for 'CL_Tensorflow' failed (register_command() failed for command CL_Tensorflow in bundle ChimeraX-CL-Tensorflow:cannot import name 'cmd' from 'chimerax.CL_Tensorflow' (/Users/jackmu/Library/Application Support/ChimeraX/1.1/site-packages/chimerax/CL_Tensorflow/__init__.py))File "/Users/jackmu/Desktop/ChimeraX-1.1.1.app/Contents/Library/Frameworks/Python.framework/Versions/3.7/lib/python3.7/site-packages/chimerax/core/commands/cli.py", line 2142, in lazy_register* *raise RuntimeError("delayed command registration for %r failed (%s)" % (cmd_name, e))"* I wonder if you know what's going on here, and how to fix it. Thank you so much for your time. Best regards, Yongcheng

3 7

Re: [chimerax-users] [Chimera-users] how to color an model by an attribute in chimerax
by Elaine Meng 03 Feb '21

03 Feb '21

Hi Yeping, **Please send ChimeraX questions to the chimerax-users(a)cgl.ucsf.edu address, *not* to chimera-users(a)cgl.ucsf.edu, because that makes people confused about which program we are talking about. Two more thoughts about your file: (1) you need to make sure the residue numbers in the file all match to your structure. I don't know which structure you are using so when I test it on some other structure that doesn't have all the same residue numbers, it does not work unless I change the match mode from "1-to-1" to "any". You might want to try using match mode "any". (2) looks like one residue has a high value 0.788 and all the others are very close to zero, so when I color the whole range the structure is all the same color (used for the low end) except for the one high-value residue. E.g. coloring by attribute entropy using palette blue-white-red makes the whole structure blue except for one residue red. Elaine > On Jan 27, 2021, at 8:25 AM, Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi Sun Yeping, > To use the "open" command to open defattr format you need ChimeraX daily build from Oct 30, 2020 or newer. Or if you are using ChimeraX 1.1, you can use the "defattr" command to open the file. Older ChimeraX than version 1.1 cannot read this file type at all. Changes and approximate dates are given in the Change Log: > > <https://www.rbvi.ucsf.edu/trac/ChimeraX/wiki/ChangeLog> > > The format is described here: > <https://rbvi.ucsf.edu/chimerax/docs/user/formats/defattr.html> > > I hope this helps, > Elaine > ----- > Elaine C. Meng, Ph.D. > UCSF Chimera(X) team > Department of Pharmaceutical Chemistry > University of California, San Francisco > > >> On Jan 27, 2021, at 1:04 AM, sunyeping <sunyeping(a)aliyun.com> wrote: >> >> Dear Elaine, >> >> Thank you for your reply. The attribute file entropy.txt is available at >> >> https://drive.google.com/file/d/1oG0O4zKqw-uD5SeLTrAu16c3Jh8m3LG5/view?usp=… >> >> Could you please help check whether the format is correct"? >> >> I cannot figure out how to open this attribure file in chimera. When I input "open entropy.txt format defattr" in chimerax, I get the following error message: >> >> Invalid "format" argument: Should be one of 'aln', 'amira', 'apbs', 'bild', 'brix', 'ccd', 'ccp4', 'cellpack', 'cmap', 'cmd', 'collada', 'compiled python', 'cube', 'dcd', 'delphi', 'dicom', 'dock', 'dsn6', 'dv', 'emanhdf', 'fasta', 'fsc', 'gltf', 'gopenmol', 'hdf', 'hssp', 'html', 'ihm', 'images', 'imagic', 'imod', 'imodmap', 'ims', 'macmolplt', 'markers', 'mmcif', 'mmtf', 'mol2', 'mrc', 'msf', 'netcdf', 'obj', 'pdb', 'pdbqt', 'pfam', 'pif', 'pir', 'positions', 'priism', 'profec', 'pseudobonds', 'python', 'rsf', 'sdf', 'segger', 'session', 'sff', 'situs', 'smiles', 'spider', 'stl', 'stockholm', 'storm', 'swc', 'tom_em', 'trr', 'uhbd', 'uniprot', 'vtk', 'web fetch', 'xplor', or 'xtc' >> >> Could you tell me what is the correct way to open the file? >> >> Thank you, >> Best, >> Yeping >> ------------------------------------------------------------------ >> From:孙业平 <sunyeping(a)aliyun.com> >> Send Time:2021年1月26日(星期二) 11:53 >> To:chimera-users <chimera-users(a)cgl.ucsf.edu> >> Subject:[Chimera-users] how to color an model by an attribute in chimerax >> >> Dear all, >> >> I wish to color an model by an attribute in chimerax. The attribute is the entropy which is calculted by an external software. I wrote the entropy values of each residue in a text file (attr.txt) like the following: >> >> attribute: entropy >> match mode: 1-to-1 >> recipient: residues >> :1 0.0 >> :2 0.0014948 >> :3 0.0090952 >> :4 0.0004805 >> :5 0.1102497 >> :6 0.0095258 >> :7 0.0008226 >> :8 0.0042205 >> :9 0.0037255 >> :10 0.0006678 >> :11 0.0027988 >> :12 0.0193925 >> :13 0.0153925 >> :14 0.0052115 >> :15 0.0020136 >> .......... >> >> However, when I input the command "color byattr attr.txt", I get the following error information: >> "No known/Registered attribute attr.txt" >> >> Could anyone tell me what is the correct way to do this? >> >> With many thanks. >> >> Best regards >> > > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users > ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

2 4

Reading cube file from Quantum Espresso pp.x
by Zack Gainsforth 02 Feb '21

02 Feb '21

Hi, I produced some projected wavefunctions in a crystal that I'm working with using Quantum Espresso (DFT). I output these projections to a gaussian cube file using the pp.x program (built into Quantum Espresso). I'm able to read these into ChimeraX but I'm unable to see the atoms -- only the volumetric data. I tried Actions - Atoms/Bonds - Show, but I still don't see the atoms. Is there another step I should take to make them visible? I see something like this: (very nice!) I'm attaching a link to the cube file below -- I can't include it because it is 600 MB. Thanks, Zack https://www.dropbox.com/s/ehhli8h3qr7vd4y/wfc_k001_b329wfc.cube?dl=0

3 5

ChimeraX-users February 2021