October 2023 - ChimeraX-users - RBVI Mailing Lists

Show side chain, main chain, and cartoon at the same time
by Zhang, Miao 27 Feb '25

27 Feb '25

Dear colleagues I am new to ChimeraX. I am trying to figure out how to show side chain, main chain, and cartoon at the same time in a protein structure. Like the one below made in other software. Could you please help? [cid:image001.png@01D9D154.CE3D4440] Best, - - - - - - - - - - - - - - - - - Miao Zhang Ph.D. Associate Professor Chapman University School of Pharmacy 9401 Jeronimo Rd, Suite 297W Irvine, CA 92618 Phone: 714-516-5478 http://www.chapman.edu/our-faculty/miao-zhang

2 24

Surface dust command in the .cxc script
by 李泽 24 Feb '25

24 Feb '25

Hi all: I'm trying to use the .cxc script to run the software, I found that the "surface dust" command has never been executed in it. Have anyone met the same problem? Any suggestions. Thank you all. Best, Ze

3 3

Get color code of a custom color
by Ahmad Khalifa 11 Feb '25

11 Feb '25

I created a custom color that I want to use in a different session. is there a way to do that besides trying to match colors by eye? Regards.

5 4

Double and Triple Bond Stick Style
by Smith, Chase 05 Feb '25

05 Feb '25

Dear ChimeraX, I was just wondering why there is no way to represent a double or triple bond in either the ligands or the protein amino acids when viewing as a Stick or Ball-and-Stick representation? I sometimes use Chimera or ChimeraX to make visuals for my lectures, and the students often have difficulty in understanding due to the absence of the multiple bonds. I would love to have the ability to represent the double or triple bonds with multiple lines between the atoms. Thank you, Chase Smith ... ChaseSmith, PhD Chair, Department of Pharmaceutical Sciences & Associate Professor of Medicinal Chemistry School of Pharmacy MCPHS University 19 Foster Street | WorcesterMA01608 T 508.373.5717F 508.890.5618C 978.855.7203 chase.smith(a)mcphs.edu www.mcphs.edu MCPHS University Confidentiality Note: This e-mail, and any attachment to it, is intended to be confidential and might be legally privileged. It is intended solely for the use of the addressee. If you are not the intended recipient, you are hereby notified that reading, copying, disseminating or distributing this email is strictly prohibited. If you have received this e-mail in error, please immediately return it to the sender and delete it from your system. Thank you.

5 5

Quest 2 Support?
by Blaine Hewitt 27 Dec '24

27 Dec '24

Hello, my name is Blaine Hewitt. Now I know that you have stated previously that you have no intention of bringing support to the Oculus Quest. Which is completely understandable since I know that not only would you have to develop around a completely new Operating System but another CPU architecture and much much more I assume. But with the soon release of the Oculus Quest 2 and it's new XR 2 chip-set makes a pretty good argument for it. As this would allow for much easier use in education (as is what I am attempting to do with it). I think it will be even easier now to push updates with SideQuest <https://sidequestvr.com/> being relatively simple to setup. I know that another (Naome <https://blog.matryx.ai/nanome-on-quest-public-beta-is-now-available-b546321…>) program is already available on the platform. But I do like your program a lot more since it is able to be used for free unlike Nanome Pricing <https://nanome.ai/pricing/> which is... as to say unappealing to public schools (such as mine). I was was also thinking (sorry if I am becoming annoying at this point) that if you do make a version of the Quest that you could make that GitHub branch available to the public. As for example while I may not be great at understanding complex protein structures I can help to make the whole experience more user friendly. Anyways if you read this far thank you for taking time from your day to read this. If you want to know who I am, my name is Blaine I am in my senior year of High School (Waynecsd <https://wh.waynecsd.org/>). I have to do a project by the end of the year where I have to present an area of study I want to pursue and I decided to research the effects of VR on the human's ability to learn and retain information. Budget..... None

4 3

Bundles with dependencies
by Vincent Mallet 24 Jun '24

24 Jun '24

Hello, Thanks for the tool and the tutorials. I have a machine learning tool based on pytorch to analyse cryo-EM data. I was hoping to package (bundle) it for Chimerax and started to follow tutorials, but I don't think you mention the right way to set up a code environment with depencies. I see a numpy import in the save_new_format tutorial, but it's not listed in the "dependencies" section of the xml file. I guess my question is : can I add arbitrary packages in a bundle ? Is there a way to install pip packages only ? Should I copy all source code in the folder and deal with my imports like that ? In particular, I am thinking of torch that is not so easy to replace... I am hoping you can help me, thanks in advance for the help ! Best, Vincent

2 8

Missing Vina on ChimeraX
by Luigi Marongiu 03 Apr '24

03 Apr '24

Dear sir or madam, I am using UCSF ChimeraX version 1.5 (2022-11-24). I have been trying to use AutoDock Vina but there is no such command in my version. How do I install it into ChimeraX (as shown in many tutorials, Vina is part of Chimera)? Thank you. Best regards, Luigi Marongiu Ph.D., B.Sc. (Hons.)

4 6

Feature request; sort by last time file was modified in save window
by m.c.feasey2＠newcastle.ac.uk 12 Feb '24

12 Feb '24

The content of this message was lost. It was probably cross-posted to multiple lists and previously handled on another list.

4 7

Re: [Chimera-users] Chimera X menu "View" vs. "Focus"
by Eric Pettersen 23 Jan '24

23 Jan '24

Hi Christian, We named it “View” instead of “Focus” because it issues a “view” command, but your points have merit — “Focus” is more evocative of what the action actually does, and is less confusable with hide/show, so after some discussion we have renamed the menu item to “Focus” and the change will be in the next daily build. The menu item item still issues/logs a “view” command to do its work. We are aware that the direct equivalent of the “Fetch By ID” dialog is missing in ChimeraX and we intend to add it. It’s just a matter of implementation priorities, so it could still be a little while — but it’s useful to know that it’s definitely missed, which will make it more likely to get worked on sooner. Also, there is a list specifically for ChimeraX user issues — chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>, (cc’ed here), which would be better to discuss ChimeraX topics on than chimera-users… --Eric Eric Pettersen UCSF Computer Graphics Lab > On Sep 25, 2023, at 12:47 AM, C. Klein via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Dear Chimera Team > > first of all, thank you very much for your important and good work on the Chimera software. > > Two comments: > > I did some recent work with Chimera X. The menu item "Focus" was changed to "View", which I find less suitable. The term "View" is often applied in other contexts, in particular if a certain residue should be shown vs. not shown. In contrast, "Focus" is not ambiguous, it is not related to showing vs. hiding certain parts of the molecular representation but exactly indicates what is done by the command. > > The direct pdb download from rcsb or whatever repository is a highly useful tool which is more difficult to access than it used to be. Ok I know it is there, I type "open xxxx" and I use the command line quite a lot anyway, but for others who start with the menus it does not appear to be accessible. Perhaps I also missed something, but then others may not find it as well. > > Thank you and best wishes > Christian Klein > _______________________________________________ > Chimera-users mailing list -- chimera-users(a)cgl.ucsf.edu > To unsubscribe send an email to chimera-users-leave(a)cgl.ucsf.edu > Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimera-users@cgl.ucsf.edu/

5 5

Colouring clipping plane
by GOVAERTS Cédric 20 Jan '24

20 Jan '24

Hi ChimeraX team. I’m trying to get an image of a protein whose surface is colored by electrostatic properties but clipped halfway. I would like the clipping plane to be white, not red/blue according to the electrostativ properties of the residues insides the protein. However, I don’t’ seem to be able to do that. -If I color everything white and then click on Molecular-Display “electrostatic”, the clipping plane also gets the electrostatic coloring [Graphical user interface Description automatically generated] -If I color everything white and then click on Molecular-Display “hydrophobic” or “rainbow” it works, the clipping plane remains white. [cid:image002.png@01D94092.6E8A2390] Can you help me getting the white clipping plane with electrostatic surface ? Thanks a bunch Cedric — Prof. Cedric Govaerts, Ph.D. Universite Libre de Bruxelles Campus Plaine. Phone :+32 2 650 53 77 Building BC, Room 1C4 203 Boulevard du Triomphe, Acces 2 1050 Brussels Belgium http://govaertslab.ulb.ac.be/

2 5

ISOLDE and secondary structure restraints
by Guido Hansen 17 Nov '23

17 Nov '23

Hi all, I just started model building in cryoEM maps and get great results using ISOLDE on AlphaFold2-derived initial models. I have a question which is mainly directed to Tristan I guess: Is is possible to use the command line/script to apply secondary structure restraints in ISOLDE? I would like to restrain the initial secondary structure assignment from Alphafold especially at resolution worse than 3.5 A. At the moment I select each and every residue range assigned to helix, parallel or antiparallel beta-strand one after the other and turn on the corresponding restrains in the ISOLDE GUI. Is there a better way via command line of script? Cheers, Guido -- PD Dr. Guido Hansen Group Leader UNIVERSITÄT ZU LÜBECK INSTITUT FÜR BIOCHEMIE Tel +49 451 3101 3122 Fax +49 451 3101 3104 E-Mail hansen(a)biochem.uni-luebeck.de www.biochem.uni-luebeck.de [1] Ratzeburger Allee 160 23562 Lübeck Links: ------ [1] http://www.biochem.uni-luebeck.de

4 5

Feature request: replace residues in model with residues from other model
by Vorländer,Matthias Kopano 17 Nov '23

17 Nov '23

Dear ChimeraX team, Thanks a lot for developing the amazing tool that is ChimeraX! I use it extensively for model building, and would like to request a functionality to replace a residue selection in one model from residues in another model (similar to what is possible in coot via the replace fragment functionality). I am aware that this currently possible by a combination of delete, combine, and changechains, but it would be great if this could be shortcutted. Many thanks in advance, Matthias

7 17

Middle mouse click to center and move to atom
by Adrián González López 27 Oct '23

27 Oct '23

Hi, I do not know if this is possible already (I could not find it), but is there a way in ChimeraX to set the middle click mouse button (or any other button) to center and orient the atom you click? Similar to what happens on PyMOL by default. This helps so much when navigating around a structure. I know you can do it in some other way, but it takes more time and it is not so user-friendly. If there is no way to do this, could it be implemented? Many thanks! Best, Adrián När du har kontakt med oss på Uppsala universitet med e-post så innebär det att vi behandlar dina personuppgifter. För att läsa mer om hur vi gör det kan du läsa här: http://www.uu.se/om-uu/dataskydd-personuppgifter/ E-mailing Uppsala University means that we will process your personal data. For more information on how this is performed, please read here: http://www.uu.se/en/about-uu/data-protection-policy

4 4

Cap clipped atoms or bonds
by Daniel Larsson 27 Oct '23

27 Oct '23

Is it possible to have atoms or bonds capped when they are truncated by a near clipping plane, similar to how surfaces can be capped. Currently, you can see the interior polygons when you clip the middle of a molecule. See the attached image for an example. I tried to search the mailing list and the documentations, but could not find anything. Regards, Daniel [cid:image001.png@01DA08BB.1559BC80] När du har kontakt med oss på Uppsala universitet med e-post så innebär det att vi behandlar dina personuppgifter. För att läsa mer om hur vi gör det kan du läsa här: http://www.uu.se/om-uu/dataskydd-personuppgifter/ E-mailing Uppsala University means that we will process your personal data. For more information on how this is performed, please read here: http://www.uu.se/en/about-uu/data-protection-policy

2 1

ChimeraX for WSL: release request
by Dmitry Semchonok 27 Oct '23

27 Oct '23

Dear Elaine and Eric, Since the number of Windows WSL systems is increasing do you consider releasing the compatible version of ChimeraX? Thank you Kind regards, Dmitry

4 8

Chimera(X) website and web services down Oct 30-31
by Elaine Meng 26 Oct '23

26 Oct '23

Dear users, Due to system upgrades, the Chimera and ChimeraX websites, associated web services hosted by the UCSF RBVI (Modeller, Blast Protein, etc.), and the ChimeraX Toolshed will be unavailable -- the estimated downtime is from Monday, Oct 30 8:00 am PDT through Tuesday, Oct 31 11:59 pm PDT. Please pardon the inconvenience, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Re: Selection with coordinates
by Tom Goddard 26 Oct '23

26 Oct '23

Hi Siyoung, The movie recording needs a "wait" command to actually render frames. If you have 300 frames in your coordinate set it would be perframe "open select_atoms.py" movie record coordset #1 wait 300 movie encode test.mp4 Also I would suggest that your python code not use "atom.hide". That is an obscure attribute for hiding backbone atoms with ribbon display. Instead use atom.display = True atom.display = False It might be possible to record the movie entirely in Python, but I've never tried it. I would not suggest trying that approach unless you want to waste a lot of time since the movie recording code was not designed to work in a Python script. Tom > On Oct 24, 2023, at 6:01 PM, Siyoung Kim <kkssy141(a)gmail.com> wrote: > > Thank you very much for the helpful information. I think I am very close to what I want to do. > > I would like to make a video of a molecular dynamics trajectory and want to show only the atoms whose x coordinates are smaller than 0. Here is what I tried. > > a) I made a python script that can be applied to each frame and named it "select_atoms.py" > --------------------------------- > from chimerax.atomic import all_atoms > atoms = all_atoms(session) > for atom in atoms: > if atom.scene_coord[0] < 0: > atom.hide = 0 > else: > atom.hide = 1 > ---------------------------------- > > b) I opened up a trajectory in ChimeraX. > > c) In ChimeraX, I executed > --------------------------------------------- > perframe "open select_atoms.py" > movie record > coordset #1 > movie encode test.mp4 > ---------------------------------------------- > > Interestingly, if I just move a frame by myself using a slider, perframe is applied well. i.e., only the atoms whose x coordinates < 0 are shown in EACH frame > However, if I record a video like the above or click a play button, perframe is not successfully applied. Only the atoms whose x coordinates < 0 in the last frame are shown in all frames. Updating a selection in each frame does not work with this approach. > I have attached the video. Would you please help me with this? Thank you. > > I would be also curious if it could be done inside a python script. In the above, I made a script that should be applied to each frame and then called this script using perframe in ChimeraX. Would there be something like RED in the below? Thank you very much! > > RECORDING A MOVIE > for s in all_atomic_structures(session): > for cs_id in s.coordset_ids: > s.active_coordset_id = cs_id > atoms = s.atoms > atoms.selecteds = atoms.scene_coords[:,0] < 0 > atoms[atoms.selecteds].hide = 0 > atoms[~atoms.selecteds].hide = 1 > SAVE THIS IMAGE > ENCODING A MOVIE > > > On Mon, Oct 23, 2023 at 11:52 AM Siyoung Kim <kkssy141(a)gmail.com <mailto:kkssy141@gmail.com>> wrote: >> Hi Eric, >> >> Thank you very much for the very helpful information! I learned a lot. >> >> Best, >> Siyoung >> >> On Fri, Oct 20, 2023 at 8:58 PM Eric Pettersen <pett(a)cgl.ucsf.edu <mailto:pett@cgl.ucsf.edu>> wrote: >>>> On Oct 17, 2023, at 1:53 PM, Siyoung Kim via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >>>> >>>> Hi Tom, >>>> >>>> Thank you for your help. I can confirm that making a text file, select.py, that contains the below and running "run select.py" in the ChimeraX command line works. >>>> >>>> from chimerax.atomic import all_atoms >>>> for a in all_atoms(session): >>>> if a.scene_coord[0] < 0: >>>> a.selected = True >>>> >>>> I am quite interested in learning more about the chimerax.atomix library. Would there be any helpful resources about this? >>> >>> There is automatically generated documentation, but I don't recommend it because it is poorly formatted and littered with rarely used constants and functions from base classes (e.g. Structure inherits from Model and Drawing and therefore documentation for first_intercept_children() [from Drawing] is included). Instead, I'd browse through the code for atomic class definitions themselves. The Cython class definitions for Atom, Element, and Bond are here: https://github.com/RBVI/ChimeraX/blob/develop/src/bundles/atomic/atomic_cpp… . The definitions for the other classes are here: https://github.com/RBVI/ChimeraX/blob/develop/src/bundles/atomic/src/molobj… . The latter only has the base class definitions for Structure and PseudobondGroup (StructureData and PseudobondGroupData respectively). The final definitions are in structure.py <https://github.com/RBVI/ChimeraX/blob/develop/src/bundles/atomic/src/struct…> and pbgroup.py <https://github.com/RBVI/ChimeraX/blob/develop/src/bundles/atomic/src/pbgrou…> . >>> >>> Another approach is to find a bundle that does something similar to what you want to do and look at its code to see how it does it. All the ChimeraX source code is in the repository linked to above (and the Python code is included in every ChimeraX installation). >>> >>>> Would it be also possible to loop over a molecular dynamics trajectory and select wanted atoms in this way? >>> >>> Yes. A structure that is a trajectory will have multiple "coordinate sets" (sets of coordinates for the atoms). Therefore you can loop through the trajectory like so: >>> >>> from chimerax.atomic import all_atomic_structures: >>> for s in all_atomic_structures(session): >>> for cs_id in s.coordset_ids: >>> s.active_coordset_id = cs_id >>> for a in s.atoms: >>> a.selected = a.scene_coord[0] < 0 >>> >>> It may also be useful to know that the value returned by s.atoms is an "Atoms" instance (see molarray.py <https://github.com/RBVI/ChimeraX/blob/develop/src/bundles/atomic/src/molarr…>) which in many ways can be treated as a vector for efficiency, which could definitely matter when processing a trajectory. So the above code could instead be: >>> >>> from chimerax.atomic import all_atomic_structures: >>> for s in all_atomic_structures(session): >>> for cs_id in s.coordset_ids: >>> s.active_coordset_id = cs_id >>> atoms = s.atoms >>> atoms.selecteds = atoms.scene_coords[:,0] < 0 >>> >>> --Eric >>> >>> Eric Pettersen >>> UCSF Computer Graphics Lab >>> >>> >>>> >>>> Thank you. >>>> Best, >>>> Siyoung >>>> >>>> On Tue, Oct 17, 2023 at 4:06 PM Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> wrote: >>>>> Oops. If you put this code in a file it needs to have a ".py" suffix, so call it select.py. The ".cxc" suffix is for ChimeraX commands. >>>>> >>>>> Tom >>>>> >>>>> > On Oct 17, 2023, at 12:58 PM, Tom Goddard via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >>>>> > >>>>> > Hi Siyoung, >>>>> > >>>>> > Here is Python code to select all atoms with x < 0. >>>>> > >>>>> > from chimerax.atomic import all_atoms >>>>> > for a in all_atoms(session): >>>>> > if a.scene_coord[0] < 0: >>>>> > a.selected = True >>>>> > >>>>> > You can type this in the ChimeraX Python shell (menu Tools / General / Shell), or probably easier, put it in a text file "select.cxc" and open that in ChimeraX to run it. >>>>> > >>>>> > Tom >>>>> > >>>>> >> On Oct 17, 2023, at 9:04 AM, Elaine Meng via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >>>>> >> >>>>> >> Hello Siyoung, >>>>> >> Sorry no, I can't think of a way to do it with a ChimeraX command. Maybe you could do it by using the initial orientation of the structure (just opening and not rotating) and veerrryyy carefully using the mouse to select a rectangle (Ctrl-click drag) but that is probably too difficult. Also you would need to know where X=0 is from just looking at the structure. >>>>> >> >>>>> >> Certainly you could do it with Python, but somebody else would have to advise on that. >>>>> >> >>>>> >> Best, >>>>> >> Elaine >>>>> >> ----- >>>>> >> Elaine C. Meng, Ph.D. >>>>> >> UCSF Chimera(X) team >>>>> >> Department of Pharmaceutical Chemistry >>>>> >> University of California, San Francisco >>>>> >> >>>>> >>> On Oct 17, 2023, at 5:33 AM, Siyoung Kim via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >>>>> >>> >>>>> >>> Hello, >>>>> >>> >>>>> >>> Would there be a selection keyword that selects atoms based on their coordinates? For instance, is there a way that I can select atoms whose x coordinates are below 0 (e.g., x < 0)? >>>>> >>> >>>>> >>> Thank you. >>>>> >>> Best, >>>>> >>> Siyoung >>>>> >> >>>>> >> >>>>> >> _______________________________________________ >>>>> >> ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> >>>>> >> To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu <mailto:chimerax-users-leave@cgl.ucsf.edu> >>>>> >> Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/ >>>>> >> >>>>> > >>>>> > >>>>> > _______________________________________________ >>>>> > ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> >>>>> > To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu <mailto:chimerax-users-leave@cgl.ucsf.edu> >>>>> > Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/ >>>>> > >>>>> >>>> _______________________________________________ >>>> ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> >>>> To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu <mailto:chimerax-users-leave@cgl.ucsf.edu> >>>> Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/ >>> > <test.mp4>

2 4

crop the map
by Dmitry Semchonok 25 Oct '23

25 Oct '23

Dear colleagues, Could you advise on how to crop the map to the new 3D box size and save those changes? Thank you. Sincerely, Dmitry

3 7

Fwd: [ccpem] Help with pairing RMSD in Chimera like COOT
by JAMES MICHAEL KRIEGER 25 Oct '23

25 Oct '23

Dear Rajnandani and all, I am adding in the chimerax users list (I don't know the plain chimera one) as I think this is a better question for people there. Just to clarify, by adjust the RMSD for the map, I guess you mean scrolling the cutoff value? Best wishes James ----- Mensaje reenviado de Alfredo Jose Florez Ariza <0000b1a72b269dbc-dmarc-request(a)jiscmail.ac.uk> ----- Fecha: Tue, 24 Oct 2023 11:49:00 -0700 De: Alfredo Jose Florez Ariza <0000b1a72b269dbc-dmarc-request(a)jiscmail.ac.uk> Responder-A: Alfredo Jose Florez Ariza <alfredo.florez(a)berkeley.edu> Asunto: Re: [ccpem] Help with pairing RMSD in Chimera like COOT Para: CCPEM(a)jiscmail.ac.uk You mean you wanna show just the density corresponding to certain region of the model? If so, you can use volume zone command. It will be something like: volume zone #X near #Y/Z: aaa-bbb range 3 X and Y are the ID numbers of your map and model. Z is the chain of your model and aaa and bbb are the residues you are interested in showing the map around. The range 3 can be modified accordingly to ‘how much of your map’ you wanna show around the model region, I guess. Alfredo On Tue, Oct 24, 2023 at 10:24 AM Rajnandani Kashyap < rajnandani.kashyap(a)health.slu.edu> wrote: > Hello Everyone > > I am at a stage of preparing figures for one of my manuscripts. And I was > wondering if we could adjust the RMSD for the map file (density) in chimera > as we do it in COOT. Basically, I want to show the electron density for a > flexible N-term residues for which I do observe the density at a lower RMSD > level in chimera. > > Any help would be greatly appreciated. > > Thanks, > Rajnandani Kashyap > Postdoc Fellow > > > ------------------------------ > > To unsubscribe from the CCPEM list, click the following link: > https://www.jiscmail.ac.uk/cgi-bin/WA-JISC.exe?SUBED1=CCPEM&A=1 > ######################################################################## To unsubscribe from the CCPEM list, click the following link: https://www.jiscmail.ac.uk/cgi-bin/WA-JISC.exe?SUBED1=CCPEM&A=1 This message was issued to members of www.jiscmail.ac.uk/CCPEM, a mailing list hosted by www.jiscmail.ac.uk, terms & conditions are available at https://www.jiscmail.ac.uk/policyandsecurity/ ----- Terminar mensaje reenviado -----

2 2

ISOLDE error: Please remove “TER” card after the single residue
by Dmitry Semchonok 25 Oct '23

25 Oct '23

Dear colleagues, I have an issue with the validation website after working with my model in ISOLDE. More detailed: When starting the simulation in ISOLDE, I am running into the error: At least one residue in your model does not match any templates in the MD forcefield. This may be due to missing or superfluous atoms, or an unusual residue that has not yet been parametrized. Launching the unparameterized residue widget to help sort this out. So certain ligand info is missing (MYR). Then appears the window that allows me to add the information about this ligand and proceed with the refinement. After finishing refinement in ChimeraX/ISOLDE, I loaded the model and the map on https://validate-rcsb-1.wwpdb.org/. But this website showed me the error: File upload failed. Please review the errors below and try again. Coordinates issues. ERROR: Please remove “TER” card after the single residue “MYR A 1” in line 136 and upload the file again. Some more observations: Although MYR is the first residue in the ChimeraX sequence, it is not visible. At the same time, COOT can see it. Please let me know how I can proceed with the https://validate-rcsb-1.wwpdb.org/ after refinement with ISOLDE. Please let me know if you require a model/map file for the investigation. Thank you Kind regards, Dmitry

2 4

Distinct clipping planes per model
by Dorien Pastoors 24 Oct '23

24 Oct '23

Hi, Thanks for maintaining such a nice software package! I'm still learning, and I'm currently stuck on clipping. I'm trying to clip models differently in ChimeraX. My aim is to have a global clipping plane to visualize two drugs binding to two domains (in the image in yellow/blue). Now I would like to offset the clipping plane slightly for surrounding protein (in beige). I would like to do this to increase the depth in my image and to emphasize that these domains are embedded in a bigger protein. As it is in fact a huge protein (its an alphafold predicted structure) making the entire protein transparent will still obscure the view on the compounds in their domains. As you can see, by using clip model I've been able to turn off clipping for the drugs in their binding pockets. However, with clip model I can only switch on or off the entire clipping plane , not offset it for a particular model. I've tried: clip model #2.3 front -10 clip model #2.3 offset -10 With clip model I can't specify an offset as it gives an error, I can only turn clipping off completely with "clip model #2.3 false", while "clip front -10" affects the total clipping plane, and I cannot specify a particular model for this clipping plane. (the beige protein model is #2.3) Hope this is clear enough and you have a solution! Thanks in advance! Kind regards, Dorien Pastoors

2 1

Image rendering artifacts with silhouettes and pixelSize value
by Vorländer,Matthias Kopano 24 Oct '23

24 Oct '23

Dear ChimeraX team, I am having issues when using silhouettes and saving an image while specifying the pixel size, as I get the artefacts shown in the attached image. If I don’t use silhouettes or don’t specify the pixel size things look fine. I updated to the latest daily version and uninstalled Isolde and ArtiaX, but the problem persist. I work on a MacBook Pro under Mac OS Ventura 13.5.2. Any ideas for fixes? Many thanks, Matthias [A white structure with colorful strands Description automatically generated with medium confidence]

2 2

Difference maps in chimerax?
by Francisco Murphy Pérez 23 Oct '23

23 Oct '23

When I open a map* in chimerax, how do I specify it is a difference density map? * maps are generated with `phenix.mtz2map finalpdb.pdb finalmtz.mtz` ... both files from the pdb-redo. Thanks

4 10

Morphing problem
by Raphael Bader 23 Oct '23

23 Oct '23

Dear all, I would like to ask for some information/help for a problem I am facing at the moment: I am currently working on a pentameric protein (C5 symmetric) that undergoes a big conformational change (translational & rotational movement) and would like to utilize the morph function in ChimeraX to come up with a good animation for it. For one single protomer the animation works fine – however, for the full pentamer the subunits follow both directions, clockwise and counterclockwise, during their rotational movement which obviously leads to a lot of clashes and therefore does not look very convincing. Since I tried almost all options listed as parameters for the morph (linear & corkscrew method, cartesian true and false, rates, coreFraction, etc.) and it did not affect the direction of rotation at all, I was wondering whether there are additional values I could modify or any other trick that might equalize the movement? Thank you very much in advance! Best regards, Raphael P.S.: I would be happy to provide data if it might help solving the problem.

3 2

Selection with coordinates
by Siyoung Kim 23 Oct '23

23 Oct '23

Hello, Would there be a selection keyword that selects atoms based on their coordinates? For instance, is there a way that I can select atoms whose x coordinates are below 0 (e.g., x < 0)? Thank you. Best, Siyoung

4 7