May 2024 - ChimeraX-users - RBVI Mailing Lists

Match atoms
by Alexander Hung Lee 22 May '24

22 May '24

Hi everyone, I'm trying to use the match command (not matchmaker) to align the ring atoms of a ligand. The command gives "No matrix compatible with both reference structure and all match structure" and translates the match command to matchmaker in the reply log. However, in Chimera I'm able to align jjst those ring atoms with the match command. Of course, using matchmaker on just those atoms in Chimera gives "No chains in reference structure #1 compatible with BLOSUM-62 similarity matrix" tl;dr. Trying to align ring atoms of a ligand instead of protein chain Chimerax mask 1 = #1:203@C19,C20,C21,C16,C17,O18 mask 2 = #2:125@C2,C3,C4,C5,C6,O6 matchmaker: No matrix compatible with both reference structure and all match structures match: Same as above. In reply log, match is extended to matchmaker Chimera mask 1 = #0:203@C19,C20,C21,C16,C17,O18 mask 2 = #1:125@C2,C3,C4,C5,C6,O6 matchmaker: No chains in reference structure #1 compatible with BLOSUM-62 similarity matrix match: Gives me RMSD ** I need this atom match functionality in ChimeraX Alex Lee PhD Student Woods Research Group<https://woodsgroup.franklinresearch.uga.edu/> Department of Biochemistry & Molecular Biology Complex Carbohydrate Research Center University of Georgia 315 Riverbend Rd. Athens, GA 30602 Email: ahl63010(a)uga.edu Mobile: (470) 641-3884

4 8

Fwd: Uncaught bounce notification
by Eric Pettersen 22 May '24

22 May '24

> Begin forwarded message: > From: Allen Place <place(a)umces.edu> > Subject: Re: Your message to chimerax-users(a)cgl.ucsf.edu awaits moderator approval > Date: May 16, 2024 at 5:11:31 AM PDT > To: chimerax-users-bounces(a)cgl.ucsf.edu > > > Help with commands. I know how to Select regions in my protein sequence, but How do I select different colors for those selections? These are various modules that I have assigned prior to the prediction based on homology. > Al > > >> On May 15, 2024, at 9:45 AM, chimerax-users-bounces(a)cgl.ucsf.edu wrote: >> >> Your mail to 'chimerax-users(a)cgl.ucsf.edu' with the subject >> >> Alphafold3 models >> >> Is being held until the list moderator can review it for approval. >> >> The message is being held because: >> >> The message is not from a list member >> >> Either the message will get posted to the list, or you will receive >> notification of the moderator's decision. > > Allen R. Place(he/him/his) > Professor, Associate Director of Research, > Director of BASLab, Director of HAB-CTI > Institute of Marine and Environmental Technology > University of Maryland Center for Environmental Sciences > The Rita Rossi Colwell Center > 701 East Pratt Street > Baltimore, MD 21202 > 410-234-8828 > place(a)umces.edu > > ALAN, ALLAN, ALLEN > From the Gaelic word for “cheerful” > > He is smart, makes friends easily, and never loses his sense of humour. > > He thrives on a challenge > > > Sign up to receive our quarterly newsletter, Inside IMET! > > >

3 4

Improvement suggestion
by Lionel Carlo Clarens 22 May '24

22 May '24

Dear User List, I am a frequent user of ChimeraX. Currently, the only way to create animations is via the command line. In contrast, the older Chimera version has an intuitive, user-friendly interface for making simple and effective animations. It would be an excellent and straightforward improvement to migrate this functionality from Chimera to ChimeraX, as I currently need to use both software. Best regards, Lionel C.

2 2

question about using ChimeraX
by 天剑流痕 21 May '24

21 May '24

This chimerax software is very useful. Could you please tell me how to connect two amino acid residues or atoms in the protein 3d diagram 天剑流痕 475514296(a)qq.com  

2 1

Sign up for the user group's email list
by Md Saiful Islam - MRC LMB 20 May '24

20 May '24

Hi Is it possible please to add me to the Chimera X user group's email list. Cheers Saif

2 1

Doubt
by GOTZONE BARANDIKA 19 May '24

19 May '24

Dear developers, I am a new user of ChimeraX. I need to create dimers in order to analyse adsorbate-adsorbant interactions for DFT calculation. I am able to create the image on the screen, but I don´t know how to save the atomic coordinates of the dimer in a single file. If I save a .pdb file in order to produce a .xyz file, just the information of one of the entities is kept. Can you please help me? [cid:image003.jpg@01DAA921.4F8EE270] Best regards, [Diapositiva1]

2 2

How to copy fitted monomer in a symmetric map?
by Noha Elhosseiny 18 May '24

18 May '24

Hi, I have a map with C15 symmetry in which I already refined the fitting of a single monomer (asymmetric unit) in the map using coot. I now want to generate the complete 15-mer atomic model. I watched your tutorial : ( https://youtu.be/v3jI43YJQMg?si=WeQg2ef2MPOw2J7H) and I tried to use the command "sym #2 (my model) C15 to do that, but instead of getting the monomers fitted around the axis of symmetry, I could see that 15 versions were visible but in a circular circumference around my map, away from the center, and the monomers are widely spaced from one another. I kind of expected this because I did not specify any coordinates to do this copying, so how can I fix this? Another question: when I use the command "measure symmetry" I get "C3, center 270 270 244". So I do not understand why it's detecting a C3 when it's clearly a C15. I think the above coordinates of the center can be used to solve my fitting problem but I am not exactly sure how. Finally I understood that even if the monomers appear properly fitted, given I manage to do it, that these are just graphical copies. So how can I then make real copies of the graphical representation of the 15-mer? Thanks Noha -- *Noha M. Elhosseiny, PhD* Department of Microbiology & Immunology Faculty of Pharmacy, Cairo University. Kasr El-Ainy St, Cairo, Egypt, 11562- Lab C-407 Website: https://eg.linkedin.com/in/nohaelhosseiny <https://eg.linkedin.com/in/nohaelhosseiny>

4 7

Re: Displaying surface model of blob clostest to a centroid
by Tom Goddard 17 May '24

17 May '24

Hi Yoseph, So you have a volume and you have markers shown in ChimeraX and you wanted to show only the connected surface piece from the volume contour surface that is closest to a specific marker? Do I have that right? You show in your image a lot of markers, but you only want to find the surface piece close to one of them? And you just want to show it and hide all the other parts of the surface? What if the closest surface piece is far away? Or what if a tiny spec of surface is close, but a bigger surface piece is nearby? I think that would require writing some Python code. There is nothing in ChimeraX that I can think of that computes connected surface pieces that are close to a marker. Did you consider just showing a zone of the surface around the marker out to a certain specified distance? The ChimeraX surface zone command does that, described here https://www.cgl.ucsf.edu/chimerax/docs/user/commands/surface.html#zone Tom > On May 17, 2024, at 4:05 PM, Yoseph Loyd <yoseph.loyd(a)mines.sdsmt.edu> wrote: > > Hi Tom, > > Sorry I was having a difficult time uploading an example image to the form. I'll attach it below, I'm displaying tracked centroids as small spheres. I was hoping that there existed a way to display the nearest yellow blob to the tracks I care about. The yellow blobs signal wise are full binary objects. Thank you for helping me with this. > > Best, > Yoseph > > On Fri, May 17, 2024 at 4:43 PM Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> wrote: >> Hi Yoseph, >> >> I don't know what you mean "objects that fit to a centroid that I've tracked". What kind of object? The centroid of what? And why isn't it displayed currently? You'll have to explain better. >> >> Tom >> >> > On May 17, 2024, at 2:07 PM, Yoseph Loyd via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >> > >> > Hi, >> > >> > My name is Yoseph, I was wondering if there is a way to display objects that fit to a centroid that I've tracked and imported into chimera. Thank you for taking the time to read this and have a nice day. >> > >> > >> > Best, >> > Yoseph >> > _______________________________________________ >> > ChimeraX-users mailing list -- chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> >> > To unsubscribe send an email to chimerax-users-leave(a)cgl.ucsf.edu <mailto:chimerax-users-leave@cgl.ucsf.edu> >> > Archives: https://mail.cgl.ucsf.edu/mailman/archives/list/chimerax-users@cgl.ucsf.edu/ >> > >>

2 2

Displaying surface model of blob clostest to a centroid
by yoseph.loyd＠mines.sdsmt.edu 17 May '24

17 May '24

Hi, My name is Yoseph, I was wondering if there is a way to display objects that fit to a centroid that I've tracked and imported into chimera. Thank you for taking the time to read this and have a nice day. Best, Yoseph

2 1

Re: [Chimera-users] Saving symmetry model in pdb format
by Elaine Meng 17 May '24

17 May '24

Hi Kailash Singh Bisht, You sent the message to chimera-users which is for Chimera questions. However, you said "ChimeraX team" so I am guessing that you are actually using ChimeraX, and I CC'd the chimerax-users address above -- please use that one for ChimeraX questions. You didn't say how you created the symmetry structure. I am guessing that when you create the symmetry structure with the "sym" command, you need to include the option "copies true" so that you get real atomic copies instead of just graphical clones. <https://rbvi.ucsf.edu/chimerax/docs/user/commands/sym.html> <https://rbvi.ucsf.edu/chimerax/docs/user/commands/sym.html#copies> I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Resource for Biocomputing, Visualization, and Informatics Department of Pharmaceutical Chemistry University of California, San Francisco > On May 17, 2024, at 12:27 AM, Kailash Singh Bisht via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Hello ChimeraX team > > I am trying to export the symmetry structure of the protomer virus protein as a pdb file but whenever I am saving that model it only saves the same protomer instead of the whole symmetry structure. Can you please help? How to export those symmetry models as PDB files > > -- > With Regards > Thanking You > > Kailash Singh Bisht > Ph.D. Student

2 1