- ChimeraX-users - RBVI Mailing Lists

Re: [chimerax-users] [Chimera-users] Alphafold
by Tom Goddard 20 Nov '22

20 Nov '22

AlphaFold prediction is running fine in ChimeraX, just tested a monomer and heterodimer prediction in the ChimeraX release candidate. AlphaFold prediction is not available in the old Chimera software. You would have to give details such as the exact pasted error, the input you were running on, the ChimeraX version, and best to do that with ChimeraX menu Help / Report a Bug.... Tom > On Nov 19, 2022, at 11:38 PM, Kornelius Zeth via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Dear all – > > I’m using Alphafold in Chimera and I have a problem to run this properly on Colab. The people from Colab say that the error messages I get since recently are related to Alphafold developers having installed a new version. Could you please let me know what I could do to get the program running again? > > Thanks and have a nice day > > Kornelius > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users <https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users>

1 0

Chimerax Error
by Natalie Loui 20 Nov '22

20 Nov '22

Hi all, I’m trying to visualize a capsid by using the sym command but I keep getting this error ”Assembly "1" not found, have" If you have any advice, please let me know. Natalie Loui PhD Student | Skaggs Graduate School of Chemical and Biological Sciences Email: nloui(a)scripps.edu | Phone #: (808)221-8270 Scripps Research Institute | 130 Scripps Way, Jupiter, FL 33458 | https://education.scripps.edu

2 1

ChimeraX Render by Attribute tool
by Elaine Meng 19 Nov '22

19 Nov '22

Hi Prathvi, There is a different address for ChimeraX questions, chimerax-users(a)cgl.ucsf.edu CC'd here. You can see the currently available tools listed in the ChimeraX User Guide, and links to their pages: <https://rbvi.ucsf.edu/chimerax/docs/user/index.html> <https://www.rbvi.ucsf.edu/chimerax/docs/user/tools/render.html> ... and the dates that they were added in the ChimeraX Change Log <https://www.rbvi.ucsf.edu/trac/ChimeraX/wiki/ChangeLog> ... so yes, we just started adding Render by Attribute to ChimeraX, but you have to get a recent daily build of version 1.6, and it does not have many options yet. Only ChimeraX (not Chimera) has a command to save attributes to a file. In Chimera you have to use the GUI. In ChimeraX we are specifically trying to make commands for all or nearly all actions you can perform with the GUI. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Nov 18, 2022, at 4:23 AM, Prathvi Singh via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Thanks once again Eric. > I have two more questions. > Is the "Render by Attribute" tool available in chimeraX because I get nothing when I run the command: ui tool show "Render by Attribute". If it isn't available, can I expect it to be added to chimeraX in the future? > Is there a command to save attributes of a residue in chimera (not chimeraX; that you covered in the previous reply) >

2 1

cif writer broken in ChimeraX
by Pranav Shah 18 Nov '22

18 Nov '22

Hi Team, I am trying to save my coords in mmcif format to keep up with the times and I am running into the following error - ///////////////////////////////////////////////////////////////////////////////////////////////////////// AttributeError: 'SaveOptionsWidget' object has no attribute 'compute_sheets' File "/Users/ps/software/ChimeraX_Daily.app/Contents/Library/Frameworks/Python.framework/Versions/3.9/lib/python3.9/site-packages/chimerax/mmcif/gui.py", line 130, in options_string if self.compute_sheets.isChecked(): See log for complete Python traceback ////////////////////////////////////////////////////////////////////////////////////////////////////////// Admittedly I am on a nightly build of the program details of which are - version 1.6.dev202211090831 (2022-11-09) Best, Pranav -- Pranav Shah Postdoctoral Research Fellow. Division of Structural Biology, Wellcome Trust Centre for Human Genetics, University of Oxford, Roosevelt Drive, Oxford OX3 7BN, UK

2 1

Distance between two atoms
by McClean, Phillip 17 Nov '22

17 Nov '22

Hi Everyone, I have a two chain model. I would like to determine the distance between the CD1 atom of residue 77 in chain B and the CD1 atom of residue Leu 150 in chain C. What would be the proper distance command. Thanks for the help again. Phil McClean

2 9

Re: [chimerax-users] [Chimera-users] Finding SASA for individual residues
by Elaine Meng 17 Nov '22

17 Nov '22

On Nov 17, 2022, at 8:01 AM, Prathvi Singh via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Hi Elaine, > > The methods you suggested for calculating SASA for residues saved me so much time. Thank you once again for it. > But I have noticed an ambiguity. > When I calculate the SASA for the same residue using chimera and chimeraX, I am getting different values. > For ex: in the PDB file 1TY4, the SASA value for residue 174.a is 2.55 when calculated using chimera and it is 292.44 when calculated using chimeraX. The same is true for other amino acids in other PDB files as well. > Why is there such a difference? > On which of the two software should I rely on? > Also, what is the unit of SASA calculated by these two softwares? > > On Mon, Nov 14, 2022 at 9:42 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > [...] > In Chimera, they are automatically calculated when you show a molecular surface. It creates an attribute named areaSAS, as explained here: > <https://www.rbvi.ucsf.edu/chimera/docs/UsersGuide/representation.html#surfa…> > > See also this previous chimera-user post on using Chimera to get a list of residue SASA values > <http://www.cgl.ucsf.edu/pipermail/chimera-users/2018-June/014729.html> > > (If you use this page <https://www.rbvi.ucsf.edu/chimera/docs/feedback.html> to search chimera-users by "sasa", that was the top hit) > > In ChimeraX, you would use the command "measure sasa" > <https://rbvi.ucsf.edu/chimerax/docs/user/commands/measure.html#sasa> > ... then save attribute "area" to file > <https://rbvi.ucsf.edu/chimerax/docs/user/commands/save.html#attributes> > Hi Prathvi, The atomic coordinates are in angstroms so the surface areas are in angstroms squared. Since this answer is mostly about ChimeraX, I'm also CCing the chimerax-users list. Regarding the differences in value: The programs are both right but based on different surfaces. By default, Chimera encloses all of the protein chains together into one surface (and chain A residue 174 is buried by some interactions with chain C, which you can probably see if you look at the structure). In ChimeraX, the default for display is to make each chain a separate surface, but for SASA calculation, it only depends on what you wrote in the "measure sasa" command. <https://rbvi.ucsf.edu/chimerax/docs/user/commands/measure.html#sasa> As mentioned in my earlier answer, the important part of what you get from "measure sasa" is not (in your case) the total reported in the Log, but instead the "area" attribute value that you will get for each residue. If you just use this ChimeraX command: measure sasa /A:174 ... then it will make a surface that only encloses that one residue, with area 292 as you said. I'm pretty sure that is NOT what you want. Instead you want tthe surface of the whole protein (or maybe one chain) and then the area of the residue given that larger surface. If you wanted to enclose all the protein chains of a model in a single surface (like Chimera default), then measure sasa protein If you wanted to make a separate surface for chain A only, then something like measure sasa /A & protein (the & protein part is still needed so that it won't enclose ligands, water, etc. that also happen to have chain ID A) Using "measure sasa" gives the residue "area" attribute that you could save to file, show in labels, etc. as explained in the help: <https://rbvi.ucsf.edu/chimerax/docs/user/commands/save.html#attributes> <https://rbvi.ucsf.edu/chimerax/docs/user/attributes.html> For your example structure 1TY4, using these ChimeraX commands: measure sasa protein info residues attribute area ...gives 2.55 for residue 174 in chain A, the same as in Chimera. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco

1 0

Multiplying the model around the helical cryo-EM map
by Dmitry Semchonok 16 Nov '22

16 Nov '22

Dear colleagues, I am trying to multiply the model subunit into the helical density. I found some command for Chimera sym #1 group c2*h,4.328,23.27,120,1 center 191.99,191.99,191.99 coord #0. Probably I have to somehow find the centre - perhaps with this command, right? Measure center #1 But not for ChimeraX. So my question is, how to do that in ChimeraX? Could you please provide the usage - it would be most helpful. Thanks in advance! Kind regards, Dmitry

2 1

Bond Rotation Questions
by FUNG Chun Po 16 Nov '22

16 Nov '22

Hello I have recently tried to use the bond rotation feature of Chimera X (Windows 10), and I have not been able to get it to work. I have tried the Bond rotation button on the toolbar, and the torsion command to no avail. The bond rotation button does not seem to do anything even when I click and drag with right click. The Torsion command states that my bond “is part of a ring/cycle and cannot be rotated” or “To set torsion, middle two atoms (/A ARG 543 N C) must be bonded;they aren't” I want to ask how do I use this function to rotate upon a simple amide bond. I am not sure am I just selecting the wrong atoms/bonds or is the function just locked for this PDB. The PDB file I am using is 7Y4P and I am trying to rotate about residues 543-544. I have also tried to do it in normal Chimera’s rotation command with no results. Thank you any advice would be welcome. Regards, Chun Po Fung

2 1

create chain as a new model from exiting PDB model
by tim smith 15 Nov '22

15 Nov '22

Hi All, I would like to create chain A as a separate model from the existing model. Could you please help me. Thank you. Best regards Tim

2 1

Question about pad parameter
by Thu Nguyen 15 Nov '22

15 Nov '22

Hello, I am using the volume cover command to crop the chain from the protein map. Here is what I did: > open 12554 from emdb > open 7ns0 > volume cover #1 atomBox #2/A1 pad 1.0 Suppose I want to add extra 17 voxels on each size of the chain, what value of pad should I add? Also, could you tell me the unit of pad in this command? Thank you very much. Best regards, Thu

3 8