- ChimeraX-users - RBVI Mailing Lists

ChimeraX does not work on windows server running RDS
by Fabian Glaser 22 Mar '22

22 Mar '22

Dear Elaine, When we try to run ChimeraX 1.3 on server 2016 windows on a computer farm (for teaching purposes), nothing happens, despite that the installation worked perfectly well. Any suggestion what we could do? Thanks a lot in advance, Fabian -------------------------- Fabian Glaser, PhD Structural and Computational Biology Unit The Lorry I. Lokey Center for Life Sciences and Engineering Technion - Israel Institute of Technology, Haifa, Israel

4 5

find clash/contacts for protein-ligand complexes
by Enrico Martinez 21 Mar '22

21 Mar '22

Dear ChimeraX users! I would like to use the "find clash/contacts" command to find if the position of the ligand (predicted by docking) is in the proximity to the two residues located in the binding pocket. I have already tried #check contacts in first 10 docking poses contacts #1.1-10&protein& :41,49 restrict #1.1-10&ligand interModel false makePseudobonds false log true intraRes false saveFile contactsALL_rep$.log This gives me the output about 84 detected contacts: #1.14/? MET 49 CE #1.14/A UNL 1 C 0.191 3.449 #1.4/? MET 49 CG #1.4/A UNL 1 C 0.147 3.613 #1.7/? HIS 41 NE2 #1.7/A UNL 1 C 0.131 3.389 #1.10/? MET 49 CE #1.10/A UNL 1 C 0.120 3.520 #1.3/? HIS 41 CD2 #1.3/A UNL 1 C 0.095 3.425 #1.3/? MET 49 CG #1.3/A UNL 1 C 0.089 3.551 #1.8/? MET 49 CG #1.8/A UNL 1 C 0.070 3.510 #1.5/? MET 49 CG #1.5/A UNL 1 C 0.023 3.617 #1.4/? MET 49 CE #1.4/A UNL 1 C 0.006 3.754 ... #1.10/? HIS 41 CG #1.10/A UNL 1 C -0.377 3.837 #1.1/? HIS 41 O #1.1/A UNL 1 C -0.378 3.618 #1.14/? HIS 41 CD2 #1.14/A UNL 1 S -0.382 3.924 may I further limit the number of the detected contacts (e.g. via modifying geometrical criteria) in order to be able to draw a conclusion about the proximity of the ligand to the selected residues, which may be done according to the values in the Overlap column? Many thanks in advance! Enrico

2 1

Re: [chimerax-users] ChimeraX does not work on windows server running RDS
by Tom Goddard 21 Mar '22

21 Mar '22

Hi Fabian, If Chimera works and ChimeraX does not it may be that your system graphics driver does not support the more modern OpenGL graphics version (3.3) required by ChimeraX. Our UCSF servers are down -- below is a PDF of the ChimeraX troubleshooting page which talks about inadequate graphics drivers. Maybe starting in debug mode will indicate if that is a problem. Tom > On Mar 21, 2022, at 11:14 AM, Fabian Glaser <fabian.glaser(a)gmail.com> wrote: > > Dear Tom, > > Thanks a lot for your quick answer. > Yes, Chimera works, and ChimeraX does not show anything, the link you provided seems to be not available at this moment. > > Can we provide you with additional information? > > Thanks, > > Fabian > > -------------------------- > Fabian Glaser, PhD > > Structural and Computational Biology Unit > The Lorry I. Lokey Center for Life Sciences and Engineering > Technion - Israel Institute of Technology, Haifa, Israel > >> On 21 Mar 2022, at 20:08, Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> wrote: >> >> Hi Fabian, >> >> Do you mean the ChimeraX window does not appear? The ChimeraX troubleshooting web page describes how to start in debug mode to get an error message which might indicate the problem >> >> https://www.cgl.ucsf.edu/chimerax/docs/troubleshoot.html#winstart <https://www.cgl.ucsf.edu/chimerax/docs/troubleshoot.html#winstart> >> >> Have other versions of ChimeraX or Chimera worked on these computers? >> >> Tom >> >> >> >>> On Mar 21, 2022, at 5:26 AM, Fabian Glaser via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >>> >>> Dear Elaine, >>> >>> When we try to run ChimeraX 1.3 on server 2016 windows on a computer farm (for teaching purposes), nothing happens, despite that the installation worked perfectly well. >>> >>> Any suggestion what we could do? >>> >>> Thanks a lot in advance, >>> >>> Fabian >>> >>> -------------------------- >>> Fabian Glaser, PhD >>> >>> Structural and Computational Biology Unit >>> The Lorry I. Lokey Center for Life Sciences and Engineering >>> Technion - Israel Institute of Technology, Haifa, Israel >>> >>> _______________________________________________ >>> ChimeraX-users mailing list >>> ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> >>> Manage subscription: >>> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users <https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users> >> >

2 1

ChimeraX does not work on windows server running RDS
by Fabian Glaser 21 Mar '22

21 Mar '22

Dear all, When we try to run ChimeraX 1.3 on server 2016 windows, nothing happens, despite that the installation worked perfectly well. Thanks a lot, Fabian -------------------------- Fabian Glaser, PhD Structural and Computational Biology Unit The Lorry I. Lokey Center for Life Sciences and Engineering Technion - Israel Institute of Technology, Haifa, Israel

1 0

Superimposition with chimeraX
by 이현숙 20 Mar '22

20 Mar '22

Hello. I would like to superimpose chemical structure to protein structure. Protein structure was created by tool - structure predict - alphafold. Chemical structure was added to the protein structure( via tool - structure edit - add smile string - build structure) My question is : when chemical structure is added on the protein structure, chemical structure is located at the active site OR just located at the center of protein structure ? I want the 1st one (located at the active site) then how can I do through ChimeraX? Thank you. Hyunsook

2 1

Aligning volumes without resampling - Saving a map relative to another
by Helge Paternoga 17 Mar '22

17 Mar '22

Hi, I would like to know if it is possible to save a .mrc map relative to another one. Basically, I would like to superpose two volumes and compare them outside of ChimeraX (i. e. using Coot) without resampling in ChimeraX, as it is my understanding that resampling changes the volume in question. I noticed that "fitmap" outputs the rotation etc. in the log, but I do not know if and how I can apply this to a map. Many thanks in advance, Helge

4 8

Uninstalling ChimeraX
by Shivam Gupta 17 Mar '22

17 Mar '22

Dear Support team, I am using a ChimeraX commercial license ( RHEL-8 ) but now I am trying to uninstall it using the command 'yum remove chimerax' with and without root privileges but hard luck. I also tried to use 'ChimeraX_main.py --uninstall' from its own directory but again no success. Could you please guide me over uninstalling chimerax. Thank you Looking forward to hearing from you soon. Have a nice day ahead. Thanks -- 株式会社ファーマフーズ Biomedical Department グプタシヴァム Gupta Shivam 〒615-8245 京都市西京区御陵大原1-49 TEL:075-748-9811 FAX:075-948-9818 E-mail: *shivam-gupta(a)pharmafoods.co.jp <a-higashiyama(a)pharmafoods.co.jp>* URL: http://www.pharmafoods.co.jp/

2 1

map segmentation
by Dmitry Semchonok 17 Mar '22

17 Mar '22

Dear colleagues, Fast questions. 1. How to segment the selected segment? So I have a) segmented the map using the segment map tool b) selected 1 piece. b) I want to segment that selected piece on the smaller parts 2. how to increase the threshold of the segmented map? Thank you Kind regards, Dmitry

3 2

Fwd: Chimerax ISOLDE install Error
by Eric Pettersen 17 Mar '22

17 Mar '22

> Begin forwarded message: > > From: HONG ZHAN <hzhan3(a)wisc.edu <mailto:hzhan3@wisc.edu>> > Subject: Chimerax ISOLDE install Error > Date: March 17, 2022 at 8:02:25 AM PDT > > > Hi all, > > I am installing ISOLDE on my daily build ChimeraX (v1.4.dev202203170703 (2022-03-17) and it showed this error: > > Downloading bundle ChimeraX_ISOLDE-1.3-cp39-cp39-win_amd64.whl > Looking in indexes: https://pypi.org/simple <https://pypi.org/simple>, https://cxtoolshed.rbvi.ucsf.edu/pypi/ <https://cxtoolshed.rbvi.ucsf.edu/pypi/> > Processing c:\users\unchwaniwala\downloads\chimerax_isolde-1.3-cp39-cp39-win_amd64.whl > Requirement already satisfied: ChimeraX-Arrays~=1.0 in c:\program files\chimerax 1.4.dev202203170703\bin\lib\site-packages (from ChimeraX-ISOLDE==1.3) (1.0) > ERROR: Could not find a version that satisfies the requirement ChimeraX-AtomicLibrary~=4.2 (from chimerax-isolde) (from versions: none) > ERROR: No matching distribution found for ChimeraX-AtomicLibrary~=4.2 > > I tried to look up online but not very useful information I found. Is a missing package I should install? Or how can I chnage the range for ChimeraX-AtomicLibrary? > > Thanks! > Hong

3 2

Placing Centroid at center of selection
by German Barcenas 16 Mar '22

16 Mar '22

Hello, I am trying to place a centroid <https://www.cgl.ucsf.edu/chimerax/docs/user/commands/define.html#centroid> marker at the center of a selection of atoms, for example in the middle of a benzene ring that is at some arbitrary position in my system. I want to do some distance measurements here. I can do something like this: shape sphere color orange radius 0.25 center sel where the center sel places the sphere where I want, but these spheres can't be used to make measurements. Instead I think I need a marker object, such as: define centroid radius 0.25 color orange But I don't know how to recreate that `center sel` position. I have tried define centroid radius 0.25 color orange position center define centroid radius 0.25 color orange position center sel define centroid radius 0.25 color orange position sel These do not work. I am under the impression that the centroid is a marker object and should have some position argument. Can anyone help me? Thanks, -- German Barcenas Ph.D Candidate | Materials Science and Engineering Materials Modeling and Theory Group Boise State University germanbarcenas(a)u.boisestate.edu | 940-577-5094

2 2