- ChimeraX-users - RBVI Mailing Lists

Re: [chimerax-users] [Chimera-users] How to caluculate buried surface area
by Elaine Meng 07 Sep '22

07 Sep '22

Hi Kenji, You are using ChimeraX? I CC'd the ChimeraX address chimerax-users(a)cgl.ucsf.edu (different than chimera-users(a)cgl.ucsf.edu) The "measure buriedArea" command does not require picking any blobs. You just specify the parts that you want in the command line. <https://www.cgl.ucsf.edu/chimerax/docs/user/commands/measure.html#buriedarea> So, maybe something like command: measure buriedarea protein with ligand ...but maybe "ligand" doesn't get your ligand. You would have to use whatever kind of specification works for your ligand, e.g. if residue name is UNK, something like this instead: measure buriedarea protein with :UNK You sent a Pymol session... I don't use Pymol so I can't open that file, sorry. I hope this helps, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Sep 5, 2022, at 9:45 PM, Kenji MATSUI via Chimera-users <chimera-users(a)cgl.ucsf.edu> wrote: > > Dear Chimera > > I am sorry to interrupt your busy schedule. > > My name is Matsui, and I am a second-year master's student at a Japanese university. > Thank you for taking time out of your busy schedule to respond to my question the other day. > > We are investigating the buried surface area to see the magnitude of the interaction between protein and ligand. > > For this purpose, I calculated the solvent accessible area of the ligand. However, the value is 9955, which shows the entire surface area of the protein. > > What should I do? I am not in a hurry for answers , so I would appreciate a reply when you have the time. > > In this case, the ligand was in the binding pocket of the protein, so I would like to calculate the ligand's solvent contact area = buried surface area. > > I tried to check and tried , but it did not work. > > 1.See https://www.cgl.ucsf.edu/pipermail/chimera-users/2009-January/003521.html > > 2.Try to use measure blob using chimera X. > Reference: https://www.cgl.ucsf.edu/chimerax/docs/user/commands/measure.html#buriedarea > > However, I didn't know how to solve this command. > Command ;ui mousemode right "pick blobs > > Reference; https://www.rbvi.ucsf.edu/chimerax/docs/user/commands/ui.html > --------------------------------------------------------------------------- > Kenji Matsui > Graduate School of Tokyo University of Agriculture and Technology　M2 > 2-24-16, Nakamachi, Koganei-shi, Tokyo 184-8588, Japan > > <Buried_surface_area_LXRα_1UHL_24,25-epoxy_cholesterol (remove LXRβ_1P8D).pse>_______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > Manage subscription: https://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users

2 3

Structure editing
by Niklas Laenger 06 Sep '22

06 Sep '22

Good afternoon, Here is Niklas Laenger. I am a graduate Student at Saint Joseph University. I am trying to modulate conformational changes due to mutation in a protein. In a YouTube tutorial I watched, they used a “minimize structure” tool under the structural editing menu. I could not find this tool, is this not there anymore? With good wishes, Niklas Link to video: https://www.youtube.com/watch?v=eJkrvr-xeXY&t=221s

2 1

AlphaFold prediction template structures
by Tom Goddard 06 Sep '22

06 Sep '22

Hi Hernando, When you run an AlphaFold prediction using the sequence of a structure you have open in ChimeraX, for instance, it shows "Sequence #1/A" to use the sequence of model #1 chain A, it only uses the sequence. It does not use the atomic coordinates in any way. AlphaFold can use structure templates but it is rather inflexible and finds them itself from the Protein Data Bank. If you get a ChimeraX daily build and press the Options button in the AlphaFold panel it will show a checkbutton "Use PDB templates when predicting structures" (default false). This checkbutton is not in ChimeraX 1.4. You can turn that on an AlphaFold will find up to 4 templates from the Protein Data Bank. AlphaFold does a really horrible job finding templates and it does not even report the templates it used. Also in my tests trying to get AlphaFold two different structure conformations by running it with different template structures, it always found just one conformation. It seems that the sequence alignment has much more influence on the final prediction than a template structure. Still if you want to try forcing AlphaFold to use your templates, the ColabFold notebook web server (not in ChimeraX) has an option to use custom templates. https://colab.research.google.com/github/sokrypton/ColabFold/blob/main/Alph… ChimeraX uses this same improved method (called ColabFold) of running AlphaFold but does not offer all of the options that the web server does. Tom > On Sep 4, 2022, at 7:45 PM, Hernando J Sosa <hernando.sosa(a)einsteinmed.edu> wrote: > > Hi Tom, > > Not sure is I've been accepted yet in the ucsf-chimeraX list but perhaps I can ask you another Alphafold related question:. > > When specifying the sequences to predict structures they van be pasted into the input sequence window, but they can also be taken from the structures/models already opened in chimera. In this second case does these 3D structures are used as templates or in any way (other than the sequence) in the Alphafold prediction? > > Thanks > > Hernando > > ___________________________________ > Hernando Sosa > Dept. of Biochemistry > Albert Einstein College of Medicine > 1300 Morris Park Av. > Bronx NY 10461 > phone (718) 430-3456 > emai: hernando.sosa@einsteinmed. <mailto:hernando.sosa@einsteinmed.org>edu > ___________________________________ > > > From: Hernando J Sosa <hernando.sosa(a)einsteinmed.edu> > Sent: Sunday, September 4, 2022 10:59 AM > To: Tom Goddard <goddard(a)sonic.net> > Subject: Re: [chimerax-users] AlphaFold > > By the way I find a bit disconcerting the way ChimeraX arranges the windows. For example, when the new window with the Alphafold run is hovered a bit over the ChimeraX window, ChimeraX grabs it and all windows inside ChimeraX gets rearranged. It takes a while to put things back the way they were. Is there a button to reset the windows display ? Perhaps like other programs that have a view menu ? > > Thanks again > > Best > > Hernando > > ___________________________________ > Hernando Sosa > Dept. of Biochemistry > Albert Einstein College of Medicine > 1300 Morris Park Av. > Bronx NY 10461 > phone (718) 430-3456 > emai: hernando.sosa@einsteinmed. <mailto:hernando.sosa@einsteinmed.org>edu > ___________________________________ > > > From: Tom Goddard <goddard(a)sonic.net> > Sent: Friday, September 2, 2022 5:17 PM > To: Hernando J Sosa <hernando.sosa(a)einsteinmed.edu> > Cc: chimerax-users(a)cgl.ucsf.edu <chimerax-users(a)cgl.ucsf.edu> > Subject: Re: [chimerax-users] AlphaFold > > CAUTION: This email comes from an external source; the attachments and/or links may compromise our secure environment. Do not open or click on suspicious emails. Please click on the “Phish Alert” button on the top right of the Outlook dashboard to report any suspicious emails. > Hi Hernando, > > I have not seen that problem. Does that always happen when you run an AlphaFold prediction? What operating system are you on? Mac? I have seen Mac ask for permission to download from a web site the first time you download from that site. It may be that the browser in ChimeraX showing the Alphafold run does not know how to ask. But it doesn't make much sense because I do not observe this. Another idea -- if your machine is sleeping when the job finishes maybe Google Colab gives up trying to download the results to your machine. If it is sleeping you might want to set your machine not to sleep during the run. This can also be important to avoid Google Colab dropping your job entirely due to inactivity. I guess another possibility is that it could be a firewall problem where your network firewall blocks the download. Since the download seems to succeed for most users, there seems to be something specific about your computer setup that causes the problem. > > At any rate, to get the results you should be able to click on Files in the left column of the AlphaFold google colab panel and among the files you should see results.zip which is what ChimeraX downloads when the job finishes. There should be a vertical "..." if hover over that file that pops up a menu that allows you to download the file. Try that. ChimeraX is receiving the download and putting it in ~/Downloads/ChimeraX/AlphaFold/prediction_N. It may also hang if there is some issue that prevents the downloads. Possibly you could connect to Google Colab through a standard web browser and try downloading the results.zip file and maybe you would at least get an error that would help diagnose the problem. > > Tom > > >> On Sep 2, 2022, at 1:26 PM, Hernando J Sosa via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >> >> Dear Chimera/ChimeraX, >> >> I've been running Alphafold through UCSF ChimeraX and sometimes the procedure gets stuck indefinitely at the last step, downloading the results files (see screenshot). Is this a known issue? is there a workaround ? >> >> Thanks >> >> Hernando >> >> <image.png> >> _______________________________________________ >> ChimeraX-users mailing list >> ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> >> Manage subscription: >> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users <https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.rbvi.…>

2 1

Re: [chimerax-users] What to do if chimerax encounters a problem that cannot be opened？
by Tom Goddard 06 Sep '22

06 Sep '22

Glad you got it to work! Sounds like either the original installation was corrupted or the ChimeraX preferences were corrupted. Tom > On Sep 5, 2022, at 7:36 PM, 胡玉霞 <18111510056(a)fudan.edu.cn> wrote: > > Thanks for all your suggestions, I tried updating the system version to macOS 12.5 and it didn't work. Because I had deleted the corresponding program (as well as the ChimeraX preferences setting file) when the software error occurred previously, changing the system preference did not apply, but I found that trying to install it a few more times and moving the ChimeraX preferences after a new error file was generated was able to install it successfully and open it normally. Thanks again! > > >> -----Original Messages----- >> From: "Tom Goddard" <goddard(a)sonic.net> >> Sent Time: 2022-09-02 03:21:47 (Friday) >> To: "胡玉霞" <18111510056(a)fudan.edu.cn> >> Cc: chimerax-users(a)cgl.ucsf.edu >> Subject: Re: [chimerax-users] What to do if chimerax encounters a problem that cannot be opened？ >> >> One further suggestion is you might try if your Mac has an M1 CPU, try the native M1 Mac version of ChimeraX which is under the Technology Preview section at the bottom of the ChimeraX download page. >> >> Tom >> >> >>> On Sep 1, 2022, at 12:16 PM, Tom Goddard <goddard(a)sonic.net> wrote: >>> >>> Hi Yuxia, >>> >>> That crash report says the Mac graphics driver crashed. I've never seen that on an M1 Mac in the past 2 years since they have been out. The error also says texture descriptor has width zero. I'm not sure if means it was trying to create a 0 width window image, in any case that should not crash. >>> >>> First think I would suggest is updating your macOS 12.1 to the current macOS 12.5. The graphics driver comes with macOS and maybe a newer graphics driver will fix this. >>> >>> The second thing is that maybe the trouble is caused by some ChimeraX preferences setting. You can try moving your ChimeraX preferences so that ChimeraX starts with factory defaults. >>> >>> mv ~/Library/Application\ Support/ChimeraX ~/Library/Application\ Support/ChimeraX.previous >>> >>> then try starting ChimeraX. >>> >>> I've made a ChimeraX bug report so we can follow up on this problem. >>> >>> https://www.rbvi.ucsf.edu/trac/ChimeraX/ticket/7544 >>> >>> Tom >>> >>> >>>> On Sep 1, 2022, at 2:34 AM, 胡玉霞 via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu> wrote: >>>> >>>> Greetings. >>>> >>>> Thank you for the great work you have done for ChimeraX development to meet the research needs of the majority of researchers. Recently, I have encountered a problem with the ChimeraX, when I open the software I have the following prompt and then the software does not work properly. So I would like to ask if there is an update for ChimeraX (the version I am using is macChimeraX-1.4.dmg, my computer system is macOS Monterey 12.1) or if I need to download the appropriate plugins and where can I download the plugins? >>>> >>>> Thanks for reading the email and I look forward to hearing from you. >>>> >>>> Yuxia Hu >>>> Fudan University >>>> >>>> >>>> >>>> <Screen Shot 2022-09-01 at 15.47.03.png> >>>> >>>> >>>> _______________________________________________ >>>> ChimeraX-users mailing list >>>> ChimeraX-users(a)cgl.ucsf.edu >>>> Manage subscription: >>>> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users >>> > > > > > >

1 0

ChimeraX slower than Chimera at loading maps?
by Brian Hudson 06 Sep '22

06 Sep '22

Hi, I have a question about map-loading performance in ChimeraX. We use Chimera for the visualization of EM maps, and have recently loaded ChimeraX 1.3 on our Centos 7 workstations. We frequently run a script that opens Chimera (or ChimeraX) and loads one or more maps. Running the script for the same 2 Gb CCP4-format map in three different programs, I get the following times for program startup + map loading, i.e., the time from when I run the script at the command line to when the map appears onscreen: Chimera 1.12 13 seconds ChimeraX 0.1 25 seconds ChimeraX 1.3 66 seconds This isn't exactly the direction I had hoped performance would trend, and was wondering if there was anything that could be done within ChimeraX 1.3 to speed the process along a little. Thanks, Brian -- BRIAN HUDSON, Ph.D. Biocurator, RCSB Protein Data Bank Assistant Research Professor, Institute for Quantitative Biomedicine Rutgers, The State University of New Jersey 174 Frelinghuysen Road, Piscataway NJ 08854 P: 848.445.4941 | E: brian.hudson(a)rcsb.org

3 4

Assistance
by Priyanka Abeyrathne 06 Sep '22

06 Sep '22

Hi, Could you let me know the command to color only the side chain not the backbone of amino acids in ChimeraX, please? Thank you. Kind regards, Priyanka

2 2

ChimeraX docked panels
by Tom Goddard 06 Sep '22

06 Sep '22

Hi Hernando, ChimeraX panels can be docked into the main window or can float freely. I agree the behavior is pretty annoying when you are trying to move a free floating panel like the AlphaFold pane and it accidentally docks it. Panels can be told not to dock -- you right click on a blank space on the tool and it shows a popup menu with an entry "Dockable Tool" and you uncheck that. Unfortunately the AlphaFold Run pane is a web browser and it takes over the right click popup so it doesn't have that menu entry. But you can make the AlphaFold Run panel not dockable with this command ui dockable false "AlphaFold Run" This will be remembered for all future sessions so you only would need to do it once. I'll look at making that the default setting for the AlphaFold Run panel. I figured out that command by right clicking on another panel and unchecking "Dockable Tool" and it logs the command that does it in the Log panel. A useful feature of docking panels is they can be stacked on top of each other as tabs. This can help save screen space. The docking system is provided by the Qt window toolkit that ChimeraX uses -- we did not write it. I am not sure if it is a blessing or curse, some of both. Tom > On Sep 4, 2022, at 7:59 AM, Hernando J Sosa <hernando.sosa(a)einsteinmed.edu> wrote: > > By the way I find a bit disconcerting the way ChimeraX arranges the windows. For example, when the new window with the Alphafold run is hovered a bit over the ChimeraX window, ChimeraX grabs it and all windows inside ChimeraX gets rearranged. It takes a while to put things back the way they were. Is there a button to reset the windows display ? Perhaps like other programs that have a view menu ? > > Thanks again > > Best > > Hernando > > ___________________________________ > Hernando Sosa > Dept. of Biochemistry > Albert Einstein College of Medicine > 1300 Morris Park Av. > Bronx NY 10461 > phone (718) 430-3456 > emai: hernando.sosa@einsteinmed. <mailto:hernando.sosa@einsteinmed.org>edu > ___________________________________ > > > From: Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> > Sent: Friday, September 2, 2022 5:17 PM > To: Hernando J Sosa <hernando.sosa(a)einsteinmed.edu <mailto:hernando.sosa@einsteinmed.edu>> > Cc: chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> > Subject: Re: [chimerax-users] AlphaFold > > CAUTION: This email comes from an external source; the attachments and/or links may compromise our secure environment. Do not open or click on suspicious emails. Please click on the “Phish Alert” button on the top right of the Outlook dashboard to report any suspicious emails. > Hi Hernando, > > I have not seen that problem. Does that always happen when you run an AlphaFold prediction? What operating system are you on? Mac? I have seen Mac ask for permission to download from a web site the first time you download from that site. It may be that the browser in ChimeraX showing the Alphafold run does not know how to ask. But it doesn't make much sense because I do not observe this. Another idea -- if your machine is sleeping when the job finishes maybe Google Colab gives up trying to download the results to your machine. If it is sleeping you might want to set your machine not to sleep during the run. This can also be important to avoid Google Colab dropping your job entirely due to inactivity. I guess another possibility is that it could be a firewall problem where your network firewall blocks the download. Since the download seems to succeed for most users, there seems to be something specific about your computer setup that causes the problem. > > At any rate, to get the results you should be able to click on Files in the left column of the AlphaFold google colab panel and among the files you should see results.zip which is what ChimeraX downloads when the job finishes. There should be a vertical "..." if hover over that file that pops up a menu that allows you to download the file. Try that. ChimeraX is receiving the download and putting it in ~/Downloads/ChimeraX/AlphaFold/prediction_N. It may also hang if there is some issue that prevents the downloads. Possibly you could connect to Google Colab through a standard web browser and try downloading the results.zip file and maybe you would at least get an error that would help diagnose the problem. > > Tom > > >> On Sep 2, 2022, at 1:26 PM, Hernando J Sosa via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >> >> Dear Chimera/ChimeraX, >> >> I've been running Alphafold through UCSF ChimeraX and sometimes the procedure gets stuck indefinitely at the last step, downloading the results files (see screenshot). Is this a known issue? is there a workaround ? >> >> Thanks >> >> Hernando >> >> <image.png> >> _______________________________________________ >> ChimeraX-users mailing list >> ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> >> Manage subscription: >> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users <https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.rbvi.…>

1 0

Re: [chimerax-users] AlphaFold predictions
by Tom Goddard 06 Sep '22

06 Sep '22

Hi Hernando, It is hard to explain how a 400 residue AlphaFold prediction downloads automatically, but a 1500 residue prediction hangs downloading. It only downloads once the job finishes. But that is a bit suspicious because I have never seen Google Colab succeed with 1500 residues. The GPUs it offers are just too old, even with Colab Pro (which is what I use) -- I only get GPUs with 16 GB memory that can handle about 1200 residues -- larger runs don't have enough GPU memory. Here are some test runs of AlphaFold prediction on Google Colab Nvidia P100 (16 GB) and on a desktop PC Nvidia RTX 3090 (24 GB) and on a server Nvidia A40 (48 GB). The A40 can handle over 3000 residues. https://www.rbvi.ucsf.edu/chimerax/data/alphafold-jan2022/afspeed.html <https://www.rbvi.ucsf.edu/chimerax/data/alphafold-jan2022/afspeed.html> I think your download problem is a Google Colab issue. Unfortunately Google Colab is an erratic service, although the price (free) is right. Tom > On Sep 4, 2022, at 6:51 AM, Hernando J Sosa <hernando.sosa(a)einsteinmed.edu> wrote: > > Thanks Tom, > > I've run successfully other predictions but of smaller sequences (~400 residues). This happened with a larger but not huge complex ( ~1500 residues total). I've tried others runs but they crashed with an error message saying that RAM was insufficient, even though the goggle account was upgraded to pro (not pro+). > > I am using a windows 10 computer and it was not in screen saving mode, but I was using the multiple desktop feature. It is likely that when the run finished the desktop with chimera and the google colab window was not the one that was on display. Would this be an issue ?? > > Best > > Hernando > > ___________________________________ > Hernando Sosa > Dept. of Biochemistry > Albert Einstein College of Medicine > 1300 Morris Park Av. > Bronx NY 10461 > phone (718) 430-3456 > emai: hernando.sosa@einsteinmed. <mailto:hernando.sosa@einsteinmed.org>edu > ___________________________________ > > > From: Tom Goddard <goddard(a)sonic.net <mailto:goddard@sonic.net>> > Sent: Friday, September 2, 2022 5:17 PM > To: Hernando J Sosa <hernando.sosa(a)einsteinmed.edu <mailto:hernando.sosa@einsteinmed.edu>> > Cc: chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu> <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> > Subject: Re: [chimerax-users] AlphaFold > > CAUTION: This email comes from an external source; the attachments and/or links may compromise our secure environment. Do not open or click on suspicious emails. Please click on the “Phish Alert” button on the top right of the Outlook dashboard to report any suspicious emails. > Hi Hernando, > > I have not seen that problem. Does that always happen when you run an AlphaFold prediction? What operating system are you on? Mac? I have seen Mac ask for permission to download from a web site the first time you download from that site. It may be that the browser in ChimeraX showing the Alphafold run does not know how to ask. But it doesn't make much sense because I do not observe this. Another idea -- if your machine is sleeping when the job finishes maybe Google Colab gives up trying to download the results to your machine. If it is sleeping you might want to set your machine not to sleep during the run. This can also be important to avoid Google Colab dropping your job entirely due to inactivity. I guess another possibility is that it could be a firewall problem where your network firewall blocks the download. Since the download seems to succeed for most users, there seems to be something specific about your computer setup that causes the problem. > > At any rate, to get the results you should be able to click on Files in the left column of the AlphaFold google colab panel and among the files you should see results.zip which is what ChimeraX downloads when the job finishes. There should be a vertical "..." if hover over that file that pops up a menu that allows you to download the file. Try that. ChimeraX is receiving the download and putting it in ~/Downloads/ChimeraX/AlphaFold/prediction_N. It may also hang if there is some issue that prevents the downloads. Possibly you could connect to Google Colab through a standard web browser and try downloading the results.zip file and maybe you would at least get an error that would help diagnose the problem. > > Tom > > >> On Sep 2, 2022, at 1:26 PM, Hernando J Sosa via ChimeraX-users <chimerax-users(a)cgl.ucsf.edu <mailto:chimerax-users@cgl.ucsf.edu>> wrote: >> >> Dear Chimera/ChimeraX, >> >> I've been running Alphafold through UCSF ChimeraX and sometimes the procedure gets stuck indefinitely at the last step, downloading the results files (see screenshot). Is this a known issue? is there a workaround ? >> >> Thanks >> >> Hernando >> >> <image.png> >> _______________________________________________ >> ChimeraX-users mailing list >> ChimeraX-users(a)cgl.ucsf.edu <mailto:ChimeraX-users@cgl.ucsf.edu> >> Manage subscription: >> https://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users <https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.rbvi.…>

1 0

protonation of small molecule
by Enrico Martinez 05 Sep '22

05 Sep '22

Dear ChimeraX users! I need to protonate a small molecule from the input pdb file producing another pdb with the protonated ligand. I use the following batch script: open 'ligand_without_H.pdb' addh hbond false save ligand_with_H.pdb displayedOnly true exit Depending on the complexity of the input 3D structure of the ligand some protons could not be added so the final protonation state is not correct. Is there a possible way to fix this issue? Many thanks in advance Enrico

2 1

AlphaFold
by Hernando J Sosa 02 Sep '22

02 Sep '22

Dear Chimera/ChimeraX, I've been running Alphafold through UCSF ChimeraX and sometimes the procedure gets stuck indefinitely at the last step, downloading the results files (see screenshot). Is this a known issue? is there a workaround ? Thanks Hernando [cid:fec1a7e2-7922-44b8-b86e-eb2401cd211c]

2 1

What to do if chimerax encounters a problem that cannot be opened？
by 胡玉霞 01 Sep '22

01 Sep '22

Greetings. Thank you for the great work you have done for ChimeraX development to meet the research needs of the majority of researchers. Recently, I have encountered a problem with the ChimeraX, when I open the software I have the following prompt and then the software does not work properly. So I would like to ask if there is an update for ChimeraX (the version I am using is macChimeraX-1.4.dmg, my computer system is macOS Monterey 12.1) or if I need to download the appropriate plugins and where can I download the plugins? Thanks for reading the email and I look forward to hearing from you. Yuxia Hu Fudan University

2 2

Proposal to an add on
by Noriega, Heather 31 Aug '22

31 Aug '22

Hello, I hope everyone is doing well. I know I have asked this before about the molmaps and have been trying to work around the "holes", in order to create a solid map for the inner volume calculation. It works very well with the AAVs, however with the other subfamilies because of their larger pores it makes it to where it is an inconsistent volume contour, and I believe it throws off the inner volume calculations. I propose to add an element to only cover the pores as a means to make the contour thinner to create a more realistic inner volume calculation. I would like to help with this feature, as my skills have improved within the last year since I first started using Chimera and ChimeraX for my project. I am unsure how I go about this and your response. I have reached out before and most of the time it ends in maybe trying another software. There is no other software that is remotely comparable to this molmap feature that is as user-friendly as it is in ChimeraX. I would really like to continue the use of ChimeraX. I have also thought of possibly trying to create a way for the molecular surface to work with the volume blob feature, but it still comes down to the pores creating the holes. A mechanism to create a feature of only covering the pores could be useful for not only my project but others that may have similar issues. Please let me know what your thoughts are as I would like to contribute to this resolution, but would also need some direction on how to start it. Thank you and I hope to hear from you soon. Thank you, Heather Noriega PhD-Pharmaceutical Science student Howard University heather.noriega(a)bison.howard.edu 520-203-1883

3 2

Displaying the main chain of residues
by Diksha Parwana 31 Aug '22

31 Aug '22

Hello, I want to display the main chain as well as the side chain of my selected residues. The main chain is only displayed when I use the hide cartoon feature. Is there some way I can see the backbone of my residues without deleting the chain as I don't want to break the continuity? I want to study both backbone and side chain interactions of my residues. Please let me know if there's a way. I'll highly appreciate it. Thanks & regards,

2 1

Help with Zone features
by Binh Nguyen 31 Aug '22

31 Aug '22

Dear ChimeraX developers, Would you please show me how to make this following figure? [cid:01baf593-38aa-4ef0-8392-146a9fb2e78d] I have learned that this is a feature in zone feature and probably solvent accessible surface, but I do not know how to make it. Any hint is much appreciated. Warm regards, B _____________________________________________ Binh A. Nguyen, Ph.D. @ Saelices's Lab Center for Alzheimer’s and Neurodegenerative Diseases Peter O’Donnell Jr. Brain Institute UT Southwestern Medical Center ________________________________ UT Southwestern Medical Center The future of medicine, today.

4 7

Color atoms by kdHydrophobicity
by Daniel Gurnon 30 Aug '22

30 Aug '22

Hi all, I use Chimera mostly for teaching purposes, and while Chimera X is definitely more user friendly for students, there are occasionally things I like from the legacy version that I can't find on a menu in the new program. One such feature is "Render by attribute". While the mlp command can create a lipophilicity surface, when I teach protein folding I like to have students visualize all atoms, with residues colored by kdHydrophobicity. Is there a simple way to implement this? Thanks Dan ____________________________ Daniel Gurnon, Ph. D. Associate Professor of Chemistry and Biochemistry DePauw University Greencastle, IN 46135

4 6

Moving/aligning/ modifying the model
by Dmitry Semchonok 30 Aug '22

30 Aug '22

Dear colleagues, Is there a way I can move(rotate) the chain/residue within a model in ChimeraX? If yes, then how? Thank you in advance. Kind regards, Dmitry

2 1

Zooming into the areas on click
by Dmitry Semchonok 29 Aug '22

29 Aug '22

Dear colleague, For presentation purposes: I would like to show the full map/model structure, then I would like to zoom in on particular areas: area 1, then area 2, then…. (preferably in motion). How is it possible to do in chimeraX? Probably as a movie? How? Thanks in advance! Kind regards, Dmitry

2 1

Can I change the curved cylinder into a straight one?
by 王超(Chao Wang) 28 Aug '22

28 Aug '22

Dear All,After displaying helix in cylinder mode, I found that it is curved by default. I would like to ask whether it can be changed to a straight shape with two ends as fulcrums or other straight way?Thanks,Chao.

3 2

Questions on job status
by Will Grubbe 26 Aug '22

26 Aug '22

Hello, I've submitted a few jobs using ChimeraX and am wondering how to check the status of them. I just need to fill in a few residues in a protein complex with known sequence - where can I find the results when they are done? Thank you for your help, Will

5 7

Imod map values
by HONG ZHAN 26 Aug '22

26 Aug '22

Dear all, It might be not a good question regarding chimeraX. I have a PEET generated averaged map and output of PEET is reversed vs. single particle maps. What is a good function to change the density of PEET output? I used newstack -multadd -1,0 function in imod, however it gave -137 level… Thanks! Hong

2 2

3d-SNFG representation of glycans
by Varga Julia 26 Aug '22

26 Aug '22

Dear All, I am trying to visualize glycans in ChimeraX, however I cannot find the possibility to use either the 3D-SNFG, nor the filled planar representation. Am I overlooking something? Is there a possibility to do this? [image: image.png] Thank you very much! Best regards, Julia Varga

2 1

Job or output file name when running Alphafold in ChimeraX?
by Rayees Mattoo 23 Aug '22

23 Aug '22

Hi, Is there a way to name the AlphaFold run job or the output file in ChimeraX? Best Rayees

3 4

Segment Maps In ChimeraX
by Myers, Jonathan 22 Aug '22

22 Aug '22

Dear ChimeraX User Group, I'm trying to segment a map using an atomic model as a reference. To make my life easier for many of the operations I use in my work, I centered all of my structures to the origin of the session. However, when I want to segment out parts of my density, the original coordinates of the map are used for the various regions. I, therefore, can't use my centered structures as a reference as I had originally planned. I don't know if this is a bug or if this is intentionally programmed, but I am having a difficult time re-aligning the segmentation to my origin-based coordinate system. Is there a better way to do what I am trying to do or am I out of luck? Thank you. Shosholoza, Jonathan Myers

3 3

request for true transparency support in .bild files
by Francois Berenger 22 Aug '22

22 Aug '22

Dear chimera hackers, In the old Chimera (not X), if I put two transparent spheres in a .bild file: one sphere can completely hide the other (e.g. a small one inside of a bigger one). While, if there was true transparency, no sphere should completely hide another. Is this better handled in ChimeraX? I _love_ .bild files, because it is so easy to generate them in order to annotate a 3D molecular system then view all of it (molecules + annotations) in Chimera. https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/bild.html Thanks a lot, F. PS: here is an example problematic .bild file for the old chimera --- .color green .transparency 0.750000 .sphere -0.542700 0.122500 -0.047867 1.500000 .sphere 1.060560 -1.270600 -0.236620 1.500000 .color orange .transparency 0.750000 .sphere 0.611100 -2.324200 -0.346200 1.250000 .sphere 1.108100 2.092000 0.140700 1.250000 .sphere -3.097400 0.651000 0.062700 1.250000 .color grey .transparency 0.750000 .sphere -0.542700 0.122500 -0.047867 1.500000 .sphere 1.060560 -1.270600 -0.236620 1.500000 .sphere -1.453700 2.784800 0.269900 1.500000 .sphere 3.272900 0.026100 -0.134900 1.500000 .sphere -2.354000 -1.959600 -0.245900 1.500000 ---

3 2

Morph map parts transformation in a complex
by HONG ZHAN 22 Aug '22

22 Aug '22

Dear user group, I am trying to do volume morph to transform different parts of a complex into another part of the same complex. Because I did drag and fit each segmented parts, the map positions are no longer the same and I have this error: Map positions are not the same. Is there a way to do the map morph to transform different map parts in the complex? Many thanks! Hong

3 4