- ChimeraX-users - RBVI Mailing Lists

Dome projection camera mode
by Tibor Füzik 10 Apr '19

10 Apr '19

Dear ChimeraX developers, I have not found the "dome" projection camera mode in ChimeraX (as it is in Chimera). Is there any equivalent projection (camera mode) or a workaround to get it? Would it be hard to implement it ChimeraX? Thanks. All the best, Tibor

3 2

PDBe-KB ligand centric pages survey
by Lukas Pravda 04 Apr '19

04 Apr '19

Dear ChimeraX users, We are in the process of redesigning the ligand pages of PDBe and we would be grateful if you could fill out a short survey to help us understand what information about small molecules / ligands you would find useful. The survey is available at https://bit.ly/2FFmHFG. Recently, we have introduced protein-specific aggregated views on the structural data (pdbe-kb.org/proteins) as a part of Protein Data Bank in Europe Knowledge Base (PDBe-KB). We highlight the available information related to structures of specific proteins, including structural and functional annotations, domains, ligand-binding sites and interfaces. In the next step we would like to present a similar aggregated view from a small molecule / ligand perspective. Thank you for your time, Lukas -- Lukas Pravda, Ph.D. Bioinformatician/Scientific Programmer Protein Data Bank in Europe (PDBe) European Bioinformatics Institute (EMBL-EBI) Wellcome Trust Genome Campus, Hinxton, Cambridge CB10 1SD United Kingdom

1 0

Feature request: save cxc
by Zack Gainsforth 02 Apr '19

02 Apr '19

Hi, I am finding that saving my visualization as a cxc (scripting command) file leads to good reproducibility. Often, when I save a session (cxs) file, it doesn’t open again later (I think because directory path names change), but if I produce the visualization by coding a cxc file instead, then it hasn’t failed (yet!). In addition, I want to keep track of actions such as median filters, and filter parameters, pixel scaling, all that jazz. When I code this into a cxc file, all that info is in the code record. When I save a session file I often cannot find that information again later (was it a gaussian filter? median? What do I write in the paper!?) I would suggest a feature to save a cxc file or output a journal of all changes for a cxs file so I can see what I did at least for documentation/reproducability later. Cheers, Zack

3 3

Re: [chimerax-users] Output motion prickle magnitude
by Scott, Brandon L. 02 Apr '19

02 Apr '19

Based on previous correspondence I added an output option in motion.py. Is there anyway to do a pull request or something similar, so that I don't have to make the changes everytime I stay up to date with the nightly builds? Thanks, -Brandon

2 1

Transparency bugs with ribbons and density maps
by Pascal Albanese 27 Mar '19

27 Mar '19

Dear all, I'm haviong troubles with visualization of trasnparencies when using EM maps and PDBs. See in the example here: [image: image.png] The ribbon in the front is completely transparent (with silhouettes), the surface is set with a 50% transparency, and the pseudobonds inside or behind can be only visible when transparency of pbonds is set to 0 (at 5 already they disappear). Does anyone already experience these issues? Bests, Pascal -- Pascal Albanese, PhD *Post-doc*, Politecnico di Torino Dipartimento DISAT, BioSolar Lab@Environment Park Via Livorno 60 10144 Torino e-mail: pascal.albanese(a)polito.it Phone number: +39 011 2257655 <+39%20011%20225%207655>

2 1

Coulombic surface coloring
by Gabor PAPAI 27 Mar '19

27 Mar '19

Dear ChimeraX team, I would like to color a protein surface by electrostatic potential. Is there a way in ChimeraX to do that? My protein is too large (more than 20 000 atoms) to create a surface in Chimera, but ChimeraX has no problem to create it. Thank you in advance for your help! Best regards, Gabor --- Gabor Papai IGBMC Integrated Structural Biology 1, rue Laurent Fries, Bp 10142 67404 Illkirch, France Tel: +33-3-69485288

2 1

Implement Crosslinks/pseudobond/distances subselections and/or export
by Pascal Albanese 22 Mar '19

22 Mar '19

Dear ChimearX Users and developers, I'm using ChimeraX for visualization and analysis of pseudobonds datasets from Crosslinking-MS and i found new features very useful (min max selection etc). I think it would be useful (but i don't know how much effort will be required) to be able to select subsets of distances (e.g. form 15 to 24 Angstroms, or involving chain A and B) and being able to create and export these subsets. for instance i have a Complex of A, B and C and i want to select all pseudo-bonds involving A and B and export them as pb file (to be able to load them as a separate model lateron). Or to sel min 15 max 24, and then export them as pb file (with "save" function). I think it would be really useful for both crosslinks visualization and analysis (i work with datasets of thousands of crosslinks on big complexes which make difficult to subselect them, i have to do it with pymol, then generate subsets and reformat them as .pb files). i had a look to previous threads, but i didn't found similar topics. If i'm wrong my apologize. Thank you! Pascal -- Pascal Albanese, PhD *Post-doc*, Politecnico di Torino Dipartimento DISAT, BioSolar Lab@Environment Park Via Livorno 60 10144 Torino e-mail: pascal.albanese(a)polito.it Phone number: +39 011 2257655 <+39%20011%20225%207655>

4 13

Re: [chimerax-users] [Chimera-users] color key in chimera X
by Elaine Meng 18 Mar '19

18 Mar '19

Hi Pranav, ChimeraX does not yet have color-key drawing, sorry. One possibility for now is that even if you want to make the main image in ChimeraX, you could still make the color key separately in Chimera and then combine them in some image-editing program like Photoshop. In Chimera, you could use the “colorkey” command as Ibrahim suggests, or the GUI (Tools… Utilities… Color Key). Either way you would have to define the colors and set values “manually” to match the coloring in ChimeraX, so we understand it is not as convenient as when the image and key are in the same program. <http://www.rbvi.ucsf.edu/chimera/docs/ContributedSoftware/2dlabels/2dlabels…> There is also a ChimeraX e-mail list chimerax-users(a)cgl.ucsf.edu that you can use if you have other issues/questions about ChimeraX specifically. Best, Elaine ----- Elaine C. Meng, Ph.D. UCSF Chimera(X) team Department of Pharmaceutical Chemistry University of California, San Francisco > On Mar 18, 2019, at 12:13 PM, Moustafa, Ibrahim M. <ria2(a)psu.edu> wrote: > > Hi Pranav, > > Not sure about ChimeraX but in Chimera you can use 'colorkey' command line: > > colorkey x1,y1 x2,y2 value1 color1 value2 color2.... > > example: > colorkey 0.1,0.1 0.11,0.5 3.0 blue 4.0 cyan 5.0 green 6.0 yellow 7.0 orange 8.0 red > > You can use the colors and their values from the output of local resolution map. > > > Ibrahim > From: Chimera-users <chimera-users-bounces(a)cgl.ucsf.edu> on behalf of Pranav Shah <p.shah.lab(a)gmail.com> > Sent: Monday, March 18, 2019 2:56 PM > To: chimera-users(a)cgl.ucsf.edu BB > Subject: [Chimera-users] color key in chimera X > > Hi, > I have a isosurface rendering that I have colored by radius as well as > local resolution. I want to now place a colour key in the image to > indicate the relevance of the colors. Is there a way to achieve this > in ChimeraX? If not, is there a way to easily port the commands to > Chimera? > > Cheers, > Pranav > -- > Pranav Shah > Postdoctoral Research Fellow.

1 0

Volume Rendering Issue
by Scott, Brandon L. 15 Mar '19

15 Mar '19

I am trying to set the thresholds to properly display volumetric fluorescence data, and for some reason, when viewed from the side, i.e. xz or yz projection, the volume goes black. I've attached two images (top view and side view) with not changes to anything else by positioning, and this can be seen clearly in the rotation video I attached. I guess my question is, is this a bug, or is it acting as it was intended? Thanks for the help, -Brandon [cid:1b1e95a3-2efc-477f-925e-74b92b367f68] [cid:56f70b34-d199-466f-a578-76fde802d5ec] ____________________ Brandon Scott, PhD SDSMT, Nanoscience

3 2

OpenGL error running ChimeraX under VNC on CentOS 7
by Tom Goddard 14 Mar '19

14 Mar '19

Hi Alexis, ChimeraX is crashing in the OpenGL graphics driver (libGL.so.1) when the Qt window toolkit is trying to use it. This is certainly an OpenGL graphics problem with your VNC setup. Sometimes VNC is run mirroring an actual display connected to the server computer you are connecting to, and sometimes it displays a virtual desktop, for example, when connecting to a server that has no physical display. ChimeraX will very likely work if VNC is mirroring an actual display on the server, but will almost surely fail if it is using a virtual desktop on the server. This is because OpenGL rendering only works to a physical display directly connected to the computer running the app (ChimeraX). I think there have been efforts to send the OpenGL commands to another computer and have that client computer's graphics card render, but that is a very obscure capability, and I have only heard of it failing, never saw it work. Tom > On Mar 14, 2019, at 10:40 AM, Alexis Rohou wrote: > > Hi Tom, > > I am attempting to get ChimeraX running on a CentOS7 workstation with a > nice discrete GPU card for running ISOLDE. Unfortunately, I am having no > luck so far. Tristan Croll, who is helping me get started with ISOLDE, > suggested I send you directly this report and ask for guidance. > > Some details: > - I installed the daily CentOS7 RPM from yesterday (13-March-2019) > - I am connecting to this workstation using a VNC server/client. I do > not have physical access to the workstation, at least not any time soon > - Starting the binary under gdb gives the error & stack trace copied below > - it could be that this is just related to OpenGL over VNC not working > properly. If you suspect this is true, could you suggest some test I > could run to confirm this is the case? > > Any other hints would be most welcome! > > Thanks, > Alexis > > >> WARNING: QOpenGLShader::compile(Vertex): failed >> WARNING: QOpenGLShader::compile(Fragment): failed >> WARNING: Could not link shader program: >> "" >> >> Program received signal SIGSEGV, Segmentation fault. >> 0x00007fffe6e6a013 in ?? () from /usr/lib64/nvidia/libGL.so.1 >> Missing separate debuginfos, use: debuginfo-install >> ucsf-chimerax-daily-2019.03.13-1.el7.x86_64 >> (gdb) bt >> #0 0x00007fffe6e6a013 in () at /usr/lib64/nvidia/libGL.so.1 >> #1 0x00007fffe54e268a in () at >> /usr/lib64/nvidia/libnvidia-glcore.so.340.107 >> #2 0x00007fffe6eac1a0 in () at /usr/lib64/nvidia/libGL.so.1 >> #3 0x00007fffe0e4fc6f in () at >> /opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/PyQt5/Qt/lib/libQt5Gui.so.5 >> #4 0x00007fffe0df1842 in () at >> /opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/PyQt5/Qt/lib/libQt5Gui.so.5 >> #5 0x00007fffe0df2143 in >> QPlatformBackingStore::composeAndFlush(QWindow*, QRegion const&, >> QPoint const&, QPlatformTextureList*, QOpenGLContext*, bool) () at >> /opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/PyQt5/Qt/lib/libQt5Gui.so.5 > > >

1 0

MOL2 import
by Marco J. Müller 14 Mar '19

14 Mar '19

Dear ChimeraX Team, when I try to load structure outputs of docking runs in .mol2 format into ChimeraX, it fails to load them, while the same can be imported by Chimera successfully. After a bit of playing around I found that the following section is relevant and fails in this format: @<TRIPOS>MOLECULE MYCOOLMOLECULE 57 62 1 SMALL USER_CHARGES The problem seems to be that ChimeraX requires explicit definitions of /#features/ and/#sets/ in the third line (apart from /#atoms #bonds #substructures/), while they are typically omitted in most programs. So the following lines could be imported: @<TRIPOS>MOLECULE MYCOOLMOLECULE 57 62 1 0 0 SMALL USER_CHARGES Can this case be addressed in a future version of ChimeraX? Thank you in advance, Marco -- Marco J. Müller PhD student Technische Universität Braunschweig Institute of Medicinal and Pharmaceutical Chemistry https://www.tu-bs.de/pharmchem Beethovenstr. 55 | 38106 Braunschweig | Germany

2 3

How can I use command crosslinks with bonds?
by Jun Ha Song 04 Mar '19

04 Mar '19

Dear RBVI, I want to use few command lines that are exclusively available for pseudobonds. The problem is that my model is consisted of markers and links, and there seems like no possible way for me to simply transfer bonds into pseudobonds. What commands like *crosslinks histogram *provide seems way to good for it to be limited for pseudobonds only. Is there a technical reason why such command is only applicable with pseudobonds? Can commands in Chimera/ChimeraX that work with pseudobonds easily be adapted to work with bonds, or is that too much of technical difficulty? If it is not feasible, is there a way to turn bonds into pseudobonds? Best, Junha Song.

3 2

matchmaker RMSD in ChimeraX
by Tom Goddard 04 Mar '19

04 Mar '19

> From: Martin Moncrieffe <mcm35(a)cam.ac.uk> > Date: March 4, 2019 at 1:15:06 AM PST > To: Tom Goddard > Subject: matchmaker in ChimeraX > > Hi Tom, > > Is it possible to get the rmsd as a function of residue position when using mm in ChimeraX? I’ve turned on the verbose flag and can see the residues used to match but not their respective rmsd’s. >

3 3

Can we draw arrows in ChimeraX?
by Steve Chou 28 Feb '19

28 Feb '19

Dear ChimeraX team, I need to draw straight and curved arrows to show the straight and twisting forces on the molecules. See the attached images (cropped from ChimeraX interface) for details. Does ChimeraX have the functionality to do this? Steve -- Steve Chou

2 3

equivalent to "define"?
by Alexis Rohou 28 Feb '19

28 Feb '19

Hi there, Having looked through the docs a few times, I'm pretty sure I know the answer, but here goes... Is there a ChimeraX equivalent to define <https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/define.html> in Chimera 1? Or any other facility to draw geometric shapes (I'm particularly interested in calculating and drawing planes)? Cheers, Alexis

3 4

Re: [chimerax-users] Color palettes for planes and solid data?
by Tom Goddard 28 Feb '19

28 Feb '19

Hi Oli, The single plane you are showing is the “solid” style, no different from if multiple planes are shown. You can use brightness value 1 for each color if you want, but it needs to be specified, it does not default to 1 (that usually is not what people want when using solid style rendering of more than 1 plane since it would be totally opaque). Also normally single planes are shown as partially transparent in both Chimera 1 and ChimeraX. Tom > On Feb 28, 2019, at 12:34 PM, Oliver Clarke <olibclarke(a)gmail.com> wrote: > > I’m also unclear why for an opaque plane it is necessary to set a brightness for each map value - surely a color palette with simple color,value pairs would be fine if there is no transparency issue as there is with a 3D solid representation? > > Oli > >> On Feb 28, 2019, at 3:06 PM, Tom Goddard <goddard(a)sonic.net> wrote: >> >> Hi Oli, >> >> To set the colors of different map values use the volume command >> >> volume #1 level 0,0 color white level 10,.9 color blue level 70,1 color green >> >> This says map value 0 has brightness 0 and color white, map value 10 has brightness 0.9 (on a 0 to 1 scale) and color blue, map value 70 has brightness 1 and color green. That is for using the “volume” or “plane” style as shown in the volume viewer panel. >> >> When you instead try to color a clipped map surface, your second screenshot has the surface threshold set to -10 while your map values range -.1 to .15 so you see just a cube surface — not sure what you are doing that for. In your third screen snapshot it looks better, but the colors are streaks on the clipped surface because the cap surface mesh subdivision is not fine. In Chimera you can set the cap subdivision in the Surface Capping dialog, but there currently is no control of the cap mesh subdivision in ChimeraX. Instead you could just crop the map either setting its bounds with the volume command “region” option or easier by using the crop mouse mode. Then the face of the cropped box will use a mesh that matches the map resolution and coloring should be ok. >> >> Tom >> >> >>> On Feb 28, 2019, at 11:35 AM, Oliver Clarke <olibclarke(a)gmail.com> wrote: >>> >>> Hi, >>> >>> Would it be possible to add support for more convenient coloring of solid representation data and planes of density maps? E.g. by specifying a color palette? Apologies if this already exists and I’m just not finding it! >>> >>> I would like to be able to make nice looking slices of a density map, without surface contours, colored by density value (e.g. attached). This can be a good way of showing disordered regions of a EM reconstruction. >>> >>> Currently, when a density map is loaded as a plane or solid represntation in Chimera, there is no way to automatically assign a predefined palette, and the defaults do not convey much information (at least for typical EM maps - example attached). >>> >>> Also, when I attempt another way to do this, coloring the surface by map value and then clipping the surface, the results are odd, unlike in Chimera (see attached at different contours). >>> >>> Cheers >>> Oli >>> >>> <Screen Shot 2019-02-28 at 2.34.47 PM.png><Screen Shot 2019-02-28 at 2.32.03 PM.png><Screen Shot 2019-02-28 at 2.25.00 PM.png><Screen Shot 2019-02-28 at 2.26.03 PM.png> >>> _______________________________________________ >>> ChimeraX-users mailing list >>> ChimeraX-users(a)cgl.ucsf.edu >>> Manage subscription: >>> http://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users >> > >

2 2

Re: [chimerax-users] Color palettes for planes and solid data?
by Tom Goddard 28 Feb '19

28 Feb '19

Hi Oli, There is no capability to automatically use a palette and min/max range of map values that sets the levels and colors. That might be useful although when I have done this by hand I think equally spaced colors rarely produces what I want. The cryosparc image you attached is a good example of the color spacing not producing a very informative view. At any rate, if you want this feature in ChimeraX use the Help / Report a Bug… menu entry which is also for requesting features. I just tried setting the map threshold below the lowest value in the map and clipping in Chimera 1 and it only clips a cube for me. So I’m not sure what you mean when you say that works in Chimera 1. The streaks when you color the clipped and capped surface are because the cap is composed of triangles and only the vertices of the triangles are colored and the triangles are very long and skinny. Read about the Surface Capping mesh subdivision option in Chimera 1 if you want more explanation of it. ChimeraX does not yet support the cap subdivision, but if you follow my previous suggestion it is an alternative method that can work. Tom > On Feb 28, 2019, at 12:31 PM, Oliver Clarke <olibclarke(a)gmail.com> wrote: > > Hi Tom, > > Yes I know it is possible to do manually, thank you, but it requires quite a lot of futzing about with brightness/color pairs to get nice looking results. I was wondering if it would be possible to add support for palettes, with color thresholds automatically distributed between a minimum and a maximum, so that one can for example color a map slice with a rainbow palette between a minimum and a maximum density value (e.g. as per the density slices from cryosparc that I attached to the previous email). > > Re the cube, I set the threshold to -10 so that when I clip the map, it exposes a face that I can color by density value. I do this in Chimera and it works as expected without altering anything, here I just see streaks. I’m still unclear why I just see streaks on the clipped face no matter the threshold - this doesn’t seem to be the intended behavior? > > Oli > >> On Feb 28, 2019, at 3:06 PM, Tom Goddard <goddard(a)sonic.net> wrote: >> >> Hi Oli, >> >> To set the colors of different map values use the volume command >> >> volume #1 level 0,0 color white level 10,.9 color blue level 70,1 color green >> >> This says map value 0 has brightness 0 and color white, map value 10 has brightness 0.9 (on a 0 to 1 scale) and color blue, map value 70 has brightness 1 and color green. That is for using the “volume” or “plane” style as shown in the volume viewer panel. >> >> When you instead try to color a clipped map surface, your second screenshot has the surface threshold set to -10 while your map values range -.1 to .15 so you see just a cube surface — not sure what you are doing that for. In your third screen snapshot it looks better, but the colors are streaks on the clipped surface because the cap surface mesh subdivision is not fine. In Chimera you can set the cap subdivision in the Surface Capping dialog, but there currently is no control of the cap mesh subdivision in ChimeraX. Instead you could just crop the map either setting its bounds with the volume command “region” option or easier by using the crop mouse mode. Then the face of the cropped box will use a mesh that matches the map resolution and coloring should be ok. >> >> Tom >> >> >>> On Feb 28, 2019, at 11:35 AM, Oliver Clarke <olibclarke(a)gmail.com> wrote: >>> >>> Hi, >>> >>> Would it be possible to add support for more convenient coloring of solid representation data and planes of density maps? E.g. by specifying a color palette? Apologies if this already exists and I’m just not finding it! >>> >>> I would like to be able to make nice looking slices of a density map, without surface contours, colored by density value (e.g. attached). This can be a good way of showing disordered regions of a EM reconstruction. >>> >>> Currently, when a density map is loaded as a plane or solid represntation in Chimera, there is no way to automatically assign a predefined palette, and the defaults do not convey much information (at least for typical EM maps - example attached). >>> >>> Also, when I attempt another way to do this, coloring the surface by map value and then clipping the surface, the results are odd, unlike in Chimera (see attached at different contours). >>> >>> Cheers >>> Oli >>> >>> <Screen Shot 2019-02-28 at 2.34.47 PM.png><Screen Shot 2019-02-28 at 2.32.03 PM.png><Screen Shot 2019-02-28 at 2.25.00 PM.png><Screen Shot 2019-02-28 at 2.26.03 PM.png> >>> _______________________________________________ >>> ChimeraX-users mailing list >>> ChimeraX-users(a)cgl.ucsf.edu >>> Manage subscription: >>> http://www.rbvi.ucsf.edu/mailman/listinfo/chimerax-users >> > >

1 0

Color palettes for planes and solid data?
by Oliver Clarke 28 Feb '19

28 Feb '19

Hi, Would it be possible to add support for more convenient coloring of solid representation data and planes of density maps? E.g. by specifying a color palette? Apologies if this already exists and I’m just not finding it! I would like to be able to make nice looking slices of a density map, without surface contours, colored by density value (e.g. attached). This can be a good way of showing disordered regions of a EM reconstruction. Currently, when a density map is loaded as a plane or solid represntation in Chimera, there is no way to automatically assign a predefined palette, and the defaults do not convey much information (at least for typical EM maps - example attached). Also, when I attempt another way to do this, coloring the surface by map value and then clipping the surface, the results are odd, unlike in Chimera (see attached at different contours). Cheers Oli

1 0

Missing features in ChimeraX
by Tom Goddard 26 Feb '19

26 Feb '19

Hi Junha, Glad to hear you are trying VR with ChimeraX. Per-model clipping in ChimeraX is done with the clip command, or with the clipping mouse modes, atom radii are set with the size command, visibility is set with the show/hide commands, color is set with the color command, there are volume tracer mouse modes, and saving marker files should work, although you hit some bug and should press the Report a Bug… button when you get that traceback. ChimeraX does not have the selection inspector window yet. ChimeraX uses a different window toolkit Qt while Chimera used Tk so it requires all new code to move any graphical user interface from Chimera to ChimeraX. ChimeraX is a completely new program, modernizing every component of the 20-year-old design of Chimera so even moving commands from Chimera to ChimeraX requires substantial work. If you don’t find ChimeraX ready for your use, of course you should continue to use Chimera. We expect ChimeraX to replace Chimera in a few years. You might want to spend an hour skimming Elaine’s thorough ChimeraX documentation to understand what is in ChimeraX, including many new features like virtual reality that are not in Chimera. Tom > On Feb 26, 2019, at 2:03 AM, Jun Ha Song wrote: > > Tom, > > I recently got HTC Vive, and therefore started using ChimeraX. I have to say; the VR functionality is amazing. The ability to VR alone is sufficient reason for me to move over to ChimeraX. > > However, I noticed that key, crucial, irreplaceable features are (as far as I am aware) non-existent on ChimeraX. Below are function/tools that exist in Chimera that I use (literally) everyday, and I am wondering if these function/tools can also be implemented on ChimeraX or not. > > - per-model clipping (mclip) > - inspect selection (ability to change atom/bond/surface radius, visibility, color) > - volume tracer (ability to save markerset or atom/bond as .cmm) > > If the circumstance is so that implementing these onto ChimeraX is not feasible, then I must remain with Chimera until similar tools become available on ChimeraX. > > Also, is there any particular reason why all the tools of Chimera are not copied onto ChimeraX? Is ChimeraX trying to be another program that is different from Chimera? > > > > As for "ability to save .cmm", I tried saving atom/link using command > > save E:\LBNL\Stereocilia\ChimeraX_Markerset.cmm format markers models #1 > > but I got error saying that > > NotImplementedError: Slices are not implemented. > File "C:\Program Files\ChimeraX\bin\lib\site-packages\chimerax\markers\cmmfiles.py", line 39, in markerset_as_xml > rgb = tuple(r/255 for r in m.color[:3]) > See log for complete Python traceback. > > is this a simple bug during development, or have I typed wrong command? > > Best, > Junha Song.

1 0

How to zoom into a spot that is not located in the center gradually and straightly?
by Steve Chou 24 Feb '19

24 Feb '19

Dear ChimeraX team, Thanks for your fast and detailed responses to my questions! If a spot is in the center of view, we can zoom into the spot through a straight line. If it's not, it's really difficult to get there through a straight line. I tried something like this in a "movie" script, but it's still not straight. ========= move y -20 zoom 1.25 wait 2 move y -20 zoom 1.25 wait 2 move y -20 zoom 1.25 wait 2 ========= Is there a way to zoom into a spot that is not in the center of view through a straight line. Steve -- Steve Chou

2 7

Can we change the lighting gradually in ChimeraX?
by Steve Chou 20 Feb '19

20 Feb '19

Dear ChimeraX team, Is it possible to change the lighting gradually in ChimeraX, e.g., from "soft lighting" to "lighting simple"? This sounds weird, but makes sense if we want to change the lighting method in a movie. Thanks in advance! Steve -- Steve Chou

2 1

help with chimerax wildcards
by Michael Lawrence 20 Feb '19

20 Feb '19

Hi, I am trying to use wild cards in chimerax but they appear not to work. I type the command color @N* blue and get as response Expected a color or one of 'byatom', 'bychain', 'byelement', 'byhetero', 'bymodel', 'bynucleotide', 'bypolymer', 'fromatoms', or 'random' or a keyword All I am trying to do is color all nitrogens blue. Version 0.5 (2018-02-05) running on macOS Sierra v10.12.6 what am I doing wrong? thanks Mike Lawrence

2 2

Blank lines in pseudobond files
by Tom Goddard 19 Feb '19

19 Feb '19

I made ChimeraX ignore blank lines and comment lines starting with “#” in pseudobond (.pb) files. Tom > On Feb 15, 2019, at 3:02 PM, Steve Chou wrote: > > Hi Elaine, > (1) I tried to read the pseudobonds from a file (.pb) , > ========================= > #1/A:13@NE2 #1/A:704@O > #1/A:13@NE2 #1/A:502@MG > #1/A:13@NE2 #1/A:501@PB > > #2/A:13@NE2 #2/A:704@O > #2/A:13@NE2 #2/A:502@MG > #2/A:13@NE2 #2/A:501@PB > ========================= > the program reported an error. > ============================= > ValueError: not enough values to unpack (expected 2, got 0) > File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/chimerax/read_pbonds/readpbonds.py", line 27, in read_pseudobond_file > aspec1, aspec2 = line.split()[:2] > See log for complete Python traceback. > ============================= > > (2) Then I tried to add distances on the ChimeraX terminal > ============================= > distance #1/A:13@NE2 #1/A:704@O > distance #1/A:13@NE2 #1/A:502@MG > distance #1/A:13@NE2 #1/A:501@PB > > distance #2/A:13@NE2 #2/A:704@O > distance #2/A:13@NE2 #2/A:502@MG > distance #2/A:13@NE2 #2/A:501@PB > ============================= > I was able to see the distance labels in the two structure. And I saw an new model (name: distances; ID:3) show up in the "Models" panels. Then I ran morphing again. The Mg and water molecules moved, but still didn't move together with the protein. > Steve > > On Fri, Feb 15, 2019 at 11:31 AM Elaine Meng <meng(a)cgl.ucsf.edu <mailto:meng@cgl.ucsf.edu>> wrote: > Hi Steve, > Yes, if those are the correct specifiers for atoms in your structure. You'd make a plain text file with name *.pb with lines like that and open it. > > You don’t have to read in pseudobonds from a file, however. If not too many, probably easier just to add distance monitors. > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html <http://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html>> > <http://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context <http://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context>> > > Elaine > > > On Feb 14, 2019, at 9:49 PM, Steve Chou <stevezchou(a)gmail.com <mailto:stevezchou@gmail.com>> wrote: > > > > Hi Elaine, > > Thanks for your detailed explanation! > > What's the format of the pseudobond file? Should it look like this? > > =============================== > > #1/A:13@NE2 #1/A:502@MG > > =============================== > > All the best, > > Steve > > > > On Thu, Feb 14, 2019 at 7:43 PM Elaine Meng <meng(a)cgl.ucsf.edu <mailto:meng@cgl.ucsf.edu>> wrote: > > Hi Steve, > > Actually I’m surprised the Mg and water were included (even if present at both ends) because I thought they had to be tethered by a bond or pseudobond (like a distance measurement) to the biopolymer chain, as described here under “Atoms in Common”: > > > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/morph.html#pairing <http://rbvi.ucsf.edu/chimerax/docs/user/commands/morph.html#pairing>> > > > > For the case where composition changes, you could add in a fake Mg ion and water to the structure that’s missing them, but you’d have to decide where to put them. Also it was my understanding that they had to be tethered to the biopolymer chain (e.g. add distance measurement, which can then be hidden), but maybe that requirement has changed, or the Mg does already have a metal-coordination pseudobond to the biopolymer. > > > > Or if you don’t care if the Mg or water move during the morph, you could just display those atoms from the original model (that was input to morphing) even though they are not present in the trajectory. > > Elaine > > ----- > > Elaine C. Meng, Ph.D. > > UCSF Chimera(X) team > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > > > > On Feb 14, 2019, at 12:51 PM, Steve Chou <stevezchou(a)gmail.com <mailto:stevezchou@gmail.com>> wrote: > > > > > > Thanks, Elaine! > > > You command "rainbow structures" works beautifully. > > > There is "a Mg ion" and "a water molecule" in the two conformations. > > > (1) If the two conformations have exactly the same compositions (by shifting the structure), the "Mg ion" and the "water molecule" do not follow the same path as the protein. They move but separate from the protein. > > > (2) If the two conformations have slightly different compositions, the "Mg ion" and the "water molecule" do not show up in the morphed pdb ensemble. > > > Is there a way to morph the specific components properly? > > > Steve > > > > > > > > > > > > > _______________________________________________ > > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > > Manage subscription: http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users <http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users> > > > > -- > Steve Chou > > > _______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > Manage subscription: http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users <http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users>

1 0

Fwd: [Chimera-users] Can ChimeraX morph between two surfaces?
by Steve Chou 16 Feb '19

16 Feb '19

Hi Elaine, (1) I tried to read the pseudobonds from a file (.pb) , ========================= #1/A:13@NE2 #1/A:704@O #1/A:13@NE2 #1/A:502@MG #1/A:13@NE2 #1/A:501@PB #2/A:13@NE2 #2/A:704@O #2/A:13@NE2 #2/A:502@MG #2/A:13@NE2 #2/A:501@PB ========================= the program reported an error. ============================= ValueError: not enough values to unpack (expected 2, got 0) File "/opt/UCSF/ChimeraX-daily/lib/python3.7/site-packages/chimerax/read_pbonds/readpbonds.py", line 27, in read_pseudobond_file aspec1, aspec2 = line.split()[:2] See log for complete Python traceback. ============================= (2) Then I tried to add distances on the ChimeraX terminal ============================= distance #1/A:13@NE2 #1/A:704@O distance #1/A:13@NE2 #1/A:502@MG distance #1/A:13@NE2 #1/A:501@PB distance #2/A:13@NE2 #2/A:704@O distance #2/A:13@NE2 #2/A:502@MG distance #2/A:13@NE2 #2/A:501@PB ============================= I was able to see the distance labels in the two structures. And I saw an new model (name: distances; ID:3) show up in the "Models" panels. Then I ran morphing again. The Mg and water molecules moved, but still didn't move together with the protein. Steve On Fri, Feb 15, 2019 at 11:31 AM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > Hi Steve, > Yes, if those are the correct specifiers for atoms in your structure. > You'd make a plain text file with name *.pb with lines like that and open > it. > > You don’t have to read in pseudobonds from a file, however. If not too > many, probably easier just to add distance monitors. > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/distance.html> > <http://rbvi.ucsf.edu/chimerax/docs/user/selection.html#context> > > Elaine > > > On Feb 14, 2019, at 9:49 PM, Steve Chou <stevezchou(a)gmail.com> wrote: > > > > Hi Elaine, > > Thanks for your detailed explanation! > > What's the format of the pseudobond file? Should it look like this? > > =============================== > > #1/A:13@NE2 #1/A:502@MG > > =============================== > > All the best, > > Steve > > > > On Thu, Feb 14, 2019 at 7:43 PM Elaine Meng <meng(a)cgl.ucsf.edu> wrote: > > Hi Steve, > > Actually I’m surprised the Mg and water were included (even if present > at both ends) because I thought they had to be tethered by a bond or > pseudobond (like a distance measurement) to the biopolymer chain, as > described here under “Atoms in Common”: > > > > <http://rbvi.ucsf.edu/chimerax/docs/user/commands/morph.html#pairing> > > > > For the case where composition changes, you could add in a fake Mg ion > and water to the structure that’s missing them, but you’d have to decide > where to put them. Also it was my understanding that they had to be > tethered to the biopolymer chain (e.g. add distance measurement, which can > then be hidden), but maybe that requirement has changed, or the Mg does > already have a metal-coordination pseudobond to the biopolymer. > > > > Or if you don’t care if the Mg or water move during the morph, you could > just display those atoms from the original model (that was input to > morphing) even though they are not present in the trajectory. > > Elaine > > ----- > > Elaine C. Meng, Ph.D. > > UCSF Chimera(X) team > > Department of Pharmaceutical Chemistry > > University of California, San Francisco > > > > > On Feb 14, 2019, at 12:51 PM, Steve Chou <stevezchou(a)gmail.com> wrote: > > > > > > Thanks, Elaine! > > > You command "rainbow structures" works beautifully. > > > There is "a Mg ion" and "a water molecule" in the two conformations. > > > (1) If the two conformations have exactly the same compositions (by > shifting the structure), the "Mg ion" and the "water molecule" do not > follow the same path as the protein. They move but separate from the > protein. > > > (2) If the two conformations have slightly different compositions, the > "Mg ion" and the "water molecule" do not show up in the morphed pdb > ensemble. > > > Is there a way to morph the specific components properly? > > > Steve > > > > > > > > > > > > > _______________________________________________ > > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu > > Manage subscription: > http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users > > -- Steve Chou -- Steve Chou

2 5

ChimeraX equivalent to ribinsidecolor
by Lukas Kater 15 Feb '19

15 Feb '19

Hi, is there a way to change the color of the inside of helices? Something like "ribinsidecolor" in chimera. see an example here (second picture from top): https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/tutorials/ribstyles.html Thanks for any feedback! Lukas

2 1

Can ChimeraX morph between two surfaces?
by Steve Chou 14 Feb '19

14 Feb '19

Dear ChimeraX team, 1. Can ChimeraX morph between two surfaces (surfaces generated from two PDBs, not maps)? 2. During morphing, can the color also change gradually from one color (one conformation colored in red) to another color (another conformation colored in blue)? 3. The following command works if #1 has only one chain. morph #2 #1/L frames 10 When there are several chains in #1, ChimeraX stopped with an error (ValueError: models have different number of chains). Thanks in advance! Steve -- Steve Chou

2 5

bug report: hide with silhouettes
by Alexis Rohou 11 Feb '19

11 Feb '19

Hi Elaine, ChimeraX team, When silhouettes is set to true, hiding all models causes a bug whereby the display panel is not responsive / redrawn. As far as I can tell other parts of the GUI are still working. Below is a minimal reproducer. Attached are screenshots of what I'm seeing when silhouettes true (bug) or silhouettes false (no bug). I am running this on MacOS 10.13.6 on a MBP with graphics "Intel Iris Plus Graphics 650 1536MB" (sorry not sure what might be relevant here), and the Chimera version is: UCSF ChimeraX version: 0.8 date: 2018-12-17 22:26:30 UTC branch: v0.8 commit: 412d62d1949722ed7f52b3e515ec0f3b70b6b7af Python: 3.6.4 Obviously there's a workaround to avoid this but this caught me a few times in the last couple of days and it'd be nice to not have to watch out for it because the only solution I've found so far is to quit ChimeraX and start again. Cheers, Alexis PS. here's the reproducer: open pdb:1tbq set silhouettes true # Hide stuff hide #!1 models # Wait a bit (alternatively stop here and return to interactive use before doing the next step) wait 100 # print version out version verbose # Try to show it again. This should work (and does if silhouettes false) show #!1 models

3 4

volume zone - unexpected behavior when newMap false
by Alexis Rohou 11 Feb '19

11 Feb '19

Hello, I've been playing with volume zone and having good fun, but... I've noticed that if I set newMap to false, then the invert option is ignored (behavior is as though invert is false, even when I specify invert true). When newMap is set to true, or not set at all, the invert option has the effect I expected from reading the documentation. Am I missing something? Hopefully description above is unambiguous but let me know if you need step-by-step. Cheers, Alexis

3 4

Can ChimeraX add noise (Brownian-like motion) in morphing?
by Steve Chou 11 Feb '19

11 Feb '19

Dear ChimeraX support, When morphing from one structure to another unaligned structure, ChimeraX follows a smoothly curved path? Can it add noise (Brownian-like motion) to the path? All the best, Steve -- Steve Chou

2 3

equivalent to "move cofr"
by Alexis Rohou 08 Feb '19

08 Feb '19

Hello, Switching to ChimeraX, I find myself looking for an equivalent to "move cofr <https://www.cgl.ucsf.edu/chimera/docs/UsersGuide/midas/move.html#cofr>". Is there one? The use case is: I'm working on a particular part of a map & structure, I open a structure of a homologuous domain from the PDB, but its coordinates are way off, and I want to move it to the region I'm working on without having to zoom out and drag it. My apologies if this is in the documentation somewhere, I'm still finding my way around. Cheers, Alexis

2 2

Output motion prickle magnitude
by Scott, Brandon L. 08 Feb '19

08 Feb '19

Using the measure motion command I am able to generate the prickles on the surfaces correctly, which is great for visualization. Is it possible to write the magnitude of those prickles, and the index to a file so we can do further analysis on the distributions? Cheers, -Brandon ____________________ Brandon Scott, PhD SDSMT, Nanoscience

2 1

How to align two molecules using a subset of atoms in ChimeraX?
by Steve Chou 08 Feb '19

08 Feb '19

Dear ChimeraX support team, I tried the following command first - it worked well. ================== match #1/A to #2/A ================== Then I tried to align the two molecules using parts of them - it didn't work and complained that "No chains in reference structure PROT.pdb #2 compatible with BLOSUM-62 similarity matrix." ================== matchmaker #1/A:10-20@CA to #2/B:10-20@CA ================== System Info: ================== Platform: Linux-3.10.0-862.el7.x86_64-x86_64-with-redhat-7.5-Maipo ChimeraX version: 0.9 (2019-02-05) ================== Thank a bunch! Steven -- Steve Chou

2 3

How to re-define the secondary structure info in ChimeraX?
by Steve Chou 08 Feb '19

08 Feb '19

Dear ChimeraX developers and users, In Chimera, I can use the following commands to redefine the secondary structure info. ============================ setattr r isHelix false : setattr r isSheet false : setattr r isSheet true :8-12,16-21 setattr r isHelix true :55-61,78-92 ============================ What's the ChimeraX equivalent? By the way, I can also delete the hydrogen atoms using "delete element.H" in Chimera. Is there an equivalent in ChimeraX? Many thanks in advance! Steve -- Steve Chou

2 1

Bio-Formats with ChimeraX?
by Matthew Akamatsu 07 Feb '19

07 Feb '19

Hi, I just started using ChimeraX to render and save 3D time lapse microscopy data as a high-performance replacement of Fiji. I am wondering how flexible ChimeraX can be in opening different TIF-derived file formats - particularly hyperstacks (multi color, multi Z, multi time). Other desired formats would be proprietary formats like .nd2 and .sld . Bio-Formats does all of this in an open-source manner - how feasible would it be to have bio-formats type functionality in ChimeraX? Thanks, Matt

2 3

VR in ChimeraX and Dell Visor
by Lewandowski, Jozef 24 Jan '19

24 Jan '19

Hi, Has anyone tested Dell Visor for VR in ChimeraX? If yes are there any issues you have run into? I am assuming that the experience should be similar to what Tom has described for Samsung Odyssey but I would appreciate if anyone had specific feedback on this particular piece of hardware. Thanks, Józef

2 1

color by conservation
by George Ghanim 16 Jan '19

16 Jan '19

Hello, Is it possible to color amino acids by conservation from an alignment file? Thanks, George Ghanim —— PhD Student Rio Lab Molecular and Cellular Biology, University of California Berkeley

2 1

ChimeraX crashes from time to time on Lenovo Y530
by Yehuda Halfon 02 Jan '19

02 Jan '19

Hi All, I bought a new laptop, Lenovo Y530 which has GTX 1050Ti as well as the intel 8750H which has UHD 630 and 16 GB of ram with windows 10. Chimerax is installed on m.2 drive. Sometimes, without any correlation it freezes and crashes, when I restart the error in the picture. All the drivers are updated. I run chimerax with the GTX as the GPU. I think it's something with the dual GPUs, is there a fix for it? I tried both 0.7 and the new 0.8 (not daily). On my other laptop, an old Macbook pro it run perfectly. Thanks, Yehuda Halfon

3 2

Movie recording error
by Carlos Escalante 21 Dec '18

21 Dec '18

Dar all, Trying to make a morphing movie. Everytime I run it, it comes out with the following error: Unknown command: coordset #3 1,21 And there is no sign that is recording. The same error occurred when I created the morphing, but it did created the morphing. Also, if I try to change anything and run the command again, it says ‘already recording a movie’ Any suggestions? Thank you Carlos R. Escalante Assistant Professor Department of Physiology and Biophysics VCU School of Medicine 1220 East Broad Street MMRB 2040 Richmond VA 23298 carlos.escalante(a)vcuhealth.org 804-628-1202

2 1

version 0.7
by jingdong cheng 21 Dec '18

21 Dec '18

Hello, Could you provide me the older version 0.7? I tried the new 0.8, it is good, fixed a lot of bugs, but it runs super slow slow. It is better to change back to 0.7, but on your website I can’t find it anymore. Cheers! Merry Christmas! Jingdong

2 1

FW: hi
by Williams, Joanne 21 Dec '18

21 Dec '18

From: mosbah amine <aminemosbah(a)hotmail.com> Date: Thursday, December 20, 2018 at 11:24 AM To: "chimerax(a)cgl.ucsf.edu" <chimerax(a)cgl.ucsf.edu> Subject: hi dear colleague trying to download chimiraX , no way to get to the right page !!! would you please send me the zip file , i agrre to licesing requarements also i have a windows10 for compatibility regards Dr mosbah amine TN

2 1

scale bar in chimerax
by Xu Jingwei 13 Dec '18

13 Dec '18

Hi, I recently installed the ChimeraX in my centos 7 and it is really powerful software to make beautiful figures. I really like it! However, one question before I setup for figures is how could I make a scale bar in ChimeraX? I did not find the relative information in the web. Could you please help me about that? I am really appreciated for that. Best, Jingwei ETH Zürich Dr. Jingwei Xu Postdoc Institute of Molecular Biology & Biophysics Department of Biology HPK D17 Otto-Stern-Weg 5 8093 Zürich, Switzerland

2 2

Dual GPU VR support
by Lewandowski, Jozef 11 Dec '18

11 Dec '18

Hi, A quick question. Does implementation of VR in ChimeraX support dual GPU? Or dual GPU would give no advantage? Thanks, Józef

2 1

transparentBackground doesn't seems to work on save
by Yehuda Halfon 09 Dec '18

09 Dec '18

Hi all, We are trying to save an image without a background using save image filename format png transparentBackground true but we get the error: transparentBackground expected key word. What are we doing wrong? Thanks, Yehuda Halfon

2 2

Incrementing value in perframe
by Scott, Brandon L. 09 Nov '18

09 Nov '18

I am attempting to use the measure convexity on each frame, and seem to have a mismatch between the frame number which goes from [0 - (N-1)] and the volume child which goes from [1 - N]. Is there a way to augment the $1 value to be $1+1? Attached are the command calls. This displays the convexity properly on the called frame: vseries play #1 jumpTo 1; measure convexity #1.2 smoothingIterations 12 palette cyan-gray-maroon range -1,1; The does not display it because of the mismatch: movie record; perframe "vseries play #1 jumpTo $1; measure convexity #1.$1 smoothingIterations 12 palette cyan-gray-maroon range -1,1;" range 1,200; wait 200; movie encode C:\Users\LLSM\Desktop\Convexity.mp4 quality highest framerate 25 Thanks in advance. -Brandon ____________________ Brandon Scott, PhD SDSMT, Nanoscience

2 1

Render images in nogui mode
by Lukas Pravda 07 Nov '18

07 Nov '18

Hi all, I was wondering if there is a way how to generate images from linux terminal. I’ve come across a couple of very old posts in the mailing list stating that this was not possible at that time. So, I wonder if anything has changed. If I use cif files only, chimerax gives “Unable to render images to save them” message. If I try to include volumetric data from cryo-EM overlaid on the structure I get an exception during opening a *.map file. Please see the script below. The exception is in the attachment Best, Lukas open emd_8909.map volume #1 color white transparency 0.7 level 0.1 step 1 zoom 1.2 open 6ds5.cif set bgColor white hide selAtoms show selAtoms ribbons color bychain ribbons light full light shadow true save image default.png width 1600 height 1600 supersample 5 transparentBackground true turn y 90 save image y.png width 1600 height 1600 supersample 5 transparentBackground true turn z 90 save image z.png width 1600 height 1600 supersample 5 transparentBackground true

3 2

chimeraX questions on representation
by Dr. Eddie 16 Oct '18

16 Oct '18

Hi, I have a few small n00b questions that would really help me along. 1) How do I change the "ball scale" property in chimeraX using a command for the sphere representation? 2) When I do "select protein" (which is represented as a cartoon) it highlights it but clicking on any of the buttons to change the representation does nothing. I need to click first on the show atoms and then I can click on those but many of the H are not connected (for LYS I have two white dots floating above the carbon with no bond to them, but a bond to other C's and it is only for one CH3 group, the other is fine). This is true in all three representations. How do I fix this? 3) Can I increase the resolution in VR? 4) After clocking on the label tool with a VIVE controller and using it, how to I change it back to the original mode so I can scale the model (using both triggers)? Thank you very much for your help! Eddie

4 3

Re: [chimerax-users] chimeraX questions on representation
by Eric Pettersen 16 Oct '18

16 Oct '18

Hi Eddie, ChimeraX (and Chimera for that matter) connect atoms in standard residues using a connectivity template. Therefore the atoms have to have standard names. Some hydrogens in your file don’t have their PDB-standard names, and therefore wind up unconnected. I have committed a fix for this — if there are unconnected hydrogens after the template pass then Chimera(X) does an additional connect-by-distance pass. A second problem with the file is that it uses ATOM records for everything, including solvent, ions, and the lipid bilayer. ATOM records are for polymeric residues and imply connectivity between consecutive residues with the same chain ID. Therefore the non polymeric components of the file should have been using HETATM records. I have attached an edited version of your file with appropriate HETATM records. It should work much better in tomorrow’s fixed build. —Eric > On Oct 16, 2018, at 11:31 AM, Dr. Eddie <eackad(a)gmail.com> wrote: > > Thanks for the help! As for the pdb, I've attached it. It shows fine in vmd and pymol. > Thanks, > Eddie > > On Tue, Oct 16, 2018 at 1:19 PM Eric Pettersen <pett(a)cgl.ucsf.edu <mailto:pett@cgl.ucsf.edu>> wrote: >> On Oct 15, 2018, at 8:35 PM, Elaine Meng <meng(a)cgl.ucsf.edu <mailto:meng@cgl.ucsf.edu>> wrote: >> >> I don’t know why your H’s are disconnected specifically, but it’s almost surely some issue with the input file. > > If you provided the input file, we might be able to offer advice on how to get ChimeraX to handle it better. One thing you might try sight unseen is to remove the LINK/CONECT records in the file (assuming it’s a PDB file). > > —Eric > > Eric Pettersen > UCSF Computer Graphics Lab > > > > > > > -- > Eddie > <popc.3a4.ionf.pdb>

2 1

Question about measuring the distance of helix axis
by ze li 16 Oct '18

16 Oct '18

Dear ChimeraX supporting team: I try to measure the distance between two helix axises, but in the "distance" command there is only atom-to-atom usage in Chimera X. Is there any command and plugin for this function, such as in Chimera? Thank you. Best,

3 2

symmetric function from different template in chimera x
by Alexei Hernandez 09 Oct '18

09 Oct '18

Good morning, I am currently utilizing chimera x for different modeling features. Right now I am trying to use the symmetric option for a file created by a peer of mine titled ppar.pdb. I added the file here and trying to use the sym function by using the template of a close protein blast result, one called 3DZU, also added it. I want to use the template of the 3dzu to create a structure for ppar. I am confused as to which command line to use out of all of them and if it is possible to use 3dzu as a template for the ppar file created. Could you please help me with the command line. Have a nice day... Alexei Hernandez

2 1

Re: [chimerax-users] [Chimera-users] FW: Contributing to ChimeraX ?
by Tom Goddard 01 Oct '18

01 Oct '18

Hi Nicholas, The ChimeraX OBJ reader is all in Python with source code included in the distribution. Windows chimerax/bin/lib/site-packages/chimerax/wavefront_obj Linux chimerax/lib/python3.6/site-packages/chimerax/wavefront_obj Mac ChimeraX.app/Contents/lib/python3.6/site-packages/chimerax/wavefront_obj The ChimeraX git repository is here https://www.rbvi.ucsf.edu/trac/ChimeraX/browser <https://www.rbvi.ucsf.edu/trac/ChimeraX/browser> I don’t think the repository can be cloned due to access restrictions, but here is some info about that and you can try and see if it works. https://www.cgl.ucsf.edu/chimerax/docs/devel/conventions.html Tom > On Oct 1, 2018, at 7:52 AM, Williams, Joanne wrote: > > > > From: Nicholas Yue > Date: Sunday, September 30, 2018 at 3:40 AM > To: "chimerax(a)cgl.ucsf.edu <mailto:chimerax@cgl.ucsf.edu>" <chimerax(a)cgl.ucsf.edu <mailto:chimerax@cgl.ucsf.edu>> > Subject: Contributing to ChimeraX ? > > Hi, > > I took ChimeraX for a spin and when I save out to OBJ, the geometries looks connected up wrongly. > > I was hoping I can take a look at the source code to attempt to fix it myself. > > I see git being mentioned in the documentation. Is there a git repo I can clone and contribute to? > > If I need to sign any documents before contributing, let me know :-) > > I have other geometry format I'd like to write out to and also I am hoping to write out quads rather than triangles for use with OpenSubdiv in rendering software like RenderMan, Arnold, Mantra etc. > > Cheers > -- > Nicholas Yue > Graphics - Arnold, Alembic, RenderMan, OpenGL, HDF5 > Custom Dev - C++ porting, OSX, Linux, Windows > http://au.linkedin.com/in/nicholasyue <http://au.linkedin.com/in/nicholasyue> > https://vimeo.com/channels/naiadtools <https://vimeo.com/channels/naiadtools>_______________________________________________ > Chimera-users mailing list: Chimera-users(a)cgl.ucsf.edu <mailto:Chimera-users@cgl.ucsf.edu> > Manage subscription: http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users <http://www.rbvi.ucsf.edu/mailman/listinfo/chimera-users>

1 0